Ease of use and comfort
► To put it back in place, engage the head
restraint rods in the openings keeping them in
line with the seat backrest.
► To lower it, press the lug A and push down on
the head restraint at the same time.
If the vehicle is so equipped, a storage space is
provided under the seat.
► Pull the strap towards you to tip the seat
cushion.
Backrest angle
3
The head restraint has a frame with
notches which prevents it from lowering;
this is a safety device in case of impact.
The adjustment is correct when the upper
edge of the head restraint is level with the
top of the head.
Armrest
► Tilt the control forwards or rearwards to
adjust the angle of the backrest.
Head restraint height
adjustment
Never drive with the head restraints removed;
they must be fitted and correctly adjusted.
2-seat front bench seat
If fitted in the vehicle, this is fixed and has a seat
belt built into the backrest for the seat next to the
driver’s seat.
The armrest has notches.
► Pull the armrest fully up
► Lower it fully down.
► Raise the armrest to the desired position.
For more information on the Seat belts,
refer to the corresponding section.
Under-seat storage
If fitted to your vehicle.
► To raise it, pull it upwards as far as possible
(notch).
► To remove it, press the lug A and pull it
upwards.
49
English 
