Ease of use and comfort
► Turn the knob to obtain the desired level of
lumbar support.
Longitudinal
Table position of the driver's
and/or the front passenger
seat backrest
► Push the control forwards or rearwards to
slide the seat.
Before moving the seat backwards,
ensure that there is nothing that might
prevent the full travel of the seat.
There is a risk of trapping or pinching
passengers if present in the rear seats or
jamming the seat if large objects are placed
on the floor behind the seat.
On the front passenger side, this position allows
long objects to be carried.
On the driver's side, this position allows rear
passengers to be helped out of the vehicle (by
the emergency services).
► Pull the control fully up and tip the backrest
forward.
To return to the normal position, pull the control
up to release the backrest, then pull the backrest
up to its raised position.
Check that there is no object that could
interfere with the movement of a seat,
both above and below.
When sharp deceleration occurs, objects
placed on the folded backrest can turn
into projectiles.
Seat cushion height
► Place the head restraint in the low position,
and if fitted to your vehicle, raise the armrest and
fold the table fitted to the back of the seat.
Electric front seat
We recommend deactivating the front
passenger airbag.
To avoid discharging the battery, carry
out these adjustments with the engine
running.
► Tilt the control upwards or downwards to
For more information on the Seat belts,
obtain the desired height.
refer to the corresponding section.
48
English 
