Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

Ease of use and comfort -> Retractable sliding table for Your Fiat Scudo Van Third Generation (2022-2025)

Ease of use and comfort  
Never use the ISOFIX ring provided for  
fixing the strap of a child seat with Top  
Tether.  
Blinds  
3
Opening/Closing  
Rear windows in row 2  
If fitted to your vehicle, the side windows in row 2  
can be opened.  
► Pull the tab A and attach the blind to the hook  
B.  
Always guide the blind slowly, using the  
tab, when raising or lowering it.  
Take one of the blinds by its grip and push it  
back or pull it forwards to the desired position.  
Panoramic sunroof  
Retractable sliding table  
While driving, the windows must be closed or  
secured at one of the notches.  
Shine, Business Lounge  
► Squeeze the two controls then move the  
window sideways.  
This is fitted with two manual and independent  
blinds, which improve thermal and acoustic  
comfort.  
For more information on the Child lock  
on rear windows, refer to the  
corresponding section.  
Side blinds  
Fitted to the windows in row 2, these protect the  
passenger compartment from the sun's rays.  
73  
Ease of use and comfort  
The storage space can only support a  
maximum weight of 3 kg; do not exceed  
this maximum load in use.  
For the table to run smoothly, ensure that  
no objects are blocking the space used  
by the runner on the floor.  
Before manoeuvring the table, check that  
there is nothing on the table.  
Moving forward or backward  
Unfolding  
The table has a central storage space covered  
by a lid. When deployed, this device becomes  
a table with two table tops on which you can  
place objects. The central part has two cup/  
can holders and can also be used to hold small  
objects (e.g. credit card, pen).  
The assembly is mounted on a runner allowing it  
to be positioned either in row 2 or row 3.  
► Operate the control on the top and pull the  
table assembly up until it clicks into place.  
► Pull each table top fully up then pivot them on  
each side into the horizontal position.  
► Lift the control (without going beyond the  
point of resistance) and slide the assembly  
forwards or backwards.  
► Release the control when it is in the desired  
position.  
► Check that the table is secured on the runner.  
If this is not the case, move the assembly slightly  
to the next notch on the runner.  
Storage  
Folding  
► Raise each table top, going beyond the point  
of resistance, to the vertical position.  
► Push each table top down into its housing  
until it clicks into place.  
You can move the table in both the open  
and stowed position. However, to ensure  
safety, it is advised that you handle the  
assembly in the stowed position.  
► Slide back the cover for access to 11 litres of  
storage space.  
74  
Ease of use and comfort  
Removal  
Changing the direction  
3
► Push the control then tip the table assembly  
downward until it clicks into place.  
► Raise the control fully to release the  
anchorages and tip the table assembly forward.  
► Remove the table assembly through the  
sliding door in row 2.  
With the table removed, you can turn it 180°.  
Remove a seat to make this easier.  
Before stowing the table tops, check that  
they are clear. Before tipping the  
assembly down, check that the two table tops  
have clicked home in the low position and that  
there is nothing in the cup holder area (such  
as a can or pen).  
Check that there is nothing in the space  
around the runner on the floor, so that  
the table disengages cleanly.  
Refitting  
► Check that there is no object obstructing the  
runner and preventing proper locking.  
Cup holders  
Two cups or cans and small objects (such as  
a credit card, portable ashtray or pen) can be  
carried in the middle of the unfolded table.  
Liquids carried in an open vessel (a cup  
or mug) could be spilt, presenting a risk.  
Be careful.  
Never use the table in this position while the  
vehicle is being driven.  
75  
Ease of use and comfort  
► Check that the control is in the upper position  
(locking mechanism armed). If not, lift this control  
fully to arm the mechanism.  
- risk of damaging the surface and starting a  
fire!  
► Place the front of the table on the runner.  
Taking care not to interfere with the control,  
tip the assembly towards the rear until you hear  
it lock into place.  
► Check that the assembly is fully locked into  
the runner. If not, slide the assembly gently along  
the runner until it meets the next notch.  
When the table is deployed, each table  
top can support a maximum of 10 kg. If  
you exceed the maximum weight limit, you  
risk damaging part or all of the table.  
Never lift the table when it is between  
individual seats; you risk damaging the table  
tops.  
Incorrect use of the table can cause  
serious injury.  
Check that the table is fully locked into  
the runner - risk of injury in the event of  
an accident or sudden braking.  
Never use the table in the open or deployed  
position while the vehicle is in motion. In the  
event of sudden braking, any object placed on  
the table can become a projectile.  
Ensure that the table is correctly stowed in  
the low position before setting off.  
Never use the table tops as seats or lean on  
them.  
► Release the control until the guide locks into  
the runner.  
Be careful of passengers' feet when  
manoeuvring the assembly.  
A label attached to the side of the table  
serves as a reminder of this.  
Storage off the runner  
If removing the table from the vehicle for  
storage, ensure that it is placed in a  
clean area, in order to avoid introducing any  
foreign bodies into the mechanisms.  
The table must be placed outside the vehicle,  
on a flat and level surface, resting on the  
guide so as not to damage visible parts.  
Before moving the table or an individual  
seat forwards or backwards, make sure  
that the seat's backrest is upright and the  
table is stowed.  
Never place hot objects such as  
saucepans or frying pans on the table  
Caution, when out of the vehicle, the  
table leans to the right or left when  
placed on a surface.  
76