Ease of use and comfort
exceed the minimum value 14 or the
maximum value 28.
► Push button 1 down until "LO" is
displayed or up until "HI" is displayed.
The active mode appears in the display screen,
as described below:
Temperature is no longer controlled. A slight air
flow can still be felt, however, resulting from the
forward movement of the vehicle.
► Press button 2 "+" to switch the system on
again.
3
Ensures soft, quiet operation by limiting
air flow.
Offers the best compromise between a
comfortable temperature and quiet
operation.
"Mono" function
The comfort setting for the passenger's side
can be indexed to the driver's comfort setting
(mono-zone).
Temperature
Provides dynamic, effective air flow.
The driver and front passenger can each set the
temperature to suit their preferences.
The value shown on the display is a level
of comfort, not a temperature in Celsius or
Fahrenheit.
When the engine is cold, the air flow will
only increase to its optimum level
gradually, to avoid distributing too much cold
air.
In cold weather, it prioritises the distribution of
warm air to the windscreen, the side windows
and the footwells only.
► Press the corresponding button 8 to activate/
deactivate the function.
The indicator lamp in the button is on when the
function is activated.
The function is deactivated automatically if a
passenger uses the temperature control.
► Push button 1 down to decrease the value or
up to increase it.
A setting of around 21 provides optimum
comfort. Depending on your
requirements, a setting between 18 and 24 is
normal.
In addition, we recommend avoiding left/right
setting differences of more than 3.
Manual mode
Rear heating - air
conditioning
It is possible to make a different choice from that
offered by the system by changing a setting.
The other functions will still be automatically
managed.
The "AUTO” symbol disappears if you change a
setting.
On entering the vehicle, if the interior
temperature is significantly colder or
warmer than the comfort value setting, there
is no need to alter the value displayed in
order to reach the required level of comfort.
The system compensates automatically and
corrects the temperature difference as quickly
as possible.
► Press the corresponding button 8 to activate/
deactivate the function.
Deactivating the system
► Press button 2 "-" until the fan symbol
disappears.
For more information, refer to the Rear
heating - air conditioning section.
This action switches off all of the functions of the
system.
For maximum cooling or heating of the
passenger compartment, it is possible to
79
English 
