Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

Ease of use and comfort -> Courtesy lamp(s) for Your Fiat Scudo Van Third Generation (2022-2025)

Ease of use and comfort  
You can set multiple programmes.  
Each one is saved in the system.  
To optimise the driving range, we recommend  
starting a programme while the vehicle is  
connected.  
depending on equipment, left-hand side-hinged  
door or tailgate).  
Temperature pre-  
conditioning (Electric)  
This function allows you to programme the  
temperature in the passenger compartment to  
reach a pre-defined, non-modifiable temperature  
(approx. 21°C) before you enter the vehicle, on  
the days and at the times of your choice.  
This function is available when the vehicle is  
connected or not connected.  
3
Always lit, ignition on.  
Always off.  
The fan noise that occurs during  
temperature pre-conditioning is perfectly  
normal.  
Front  
Operating conditions  
– The function is only activated when the  
ignition is switched off and the vehicle  
locked.  
– When the vehicle is not connected, the  
function is only activated if the battery charge  
level is greater than 50%.  
Programming  
With Bluetooth® audio system  
Temperature pre-conditioning is not available  
with the Bluetooth® audio system.  
With Connect Nav system  
In the Applications menu:  
– When the vehicle is not connected and a  
recurring programme is active (e.g. from Monday  
to Friday), if two temperature pre-conditioning  
sequences are run without the vehicle being  
used, the programme will be deactivated.  
Press "Car Apps" to display the applications  
home page.  
Select Temperature conditioning.  
► Press + to add a programme.  
► Select the time of entry into the vehicle and  
the desired days. Press OK.  
Courtesy lamp(s)  
Front: comes on when one of the front or  
rear doors is opened (sliding side door  
and depending on equipment, left-hand  
side-hinged door or tailgate).  
► Press ON to activate this programme.  
The temperature pre-conditioning sequence  
begins approximately 45 minutes before the  
programmed time when the vehicle is connected  
(20 minutes when it is not connected) and is  
maintained for 10 minutes after.  
Rear or row 2 and row 3: comes on when one of  
the rear doors is opened (sliding side door and  
85  
Ease of use and comfort  
Individual reading lamp  
If fitted to the vehicle, these are switched  
on and off by means of a manual switch.  
With the ignition on, operate the corresponding  
switch.  
Automatic switching on/off  
Rear  
The front courtesy lamp comes on when the key  
is removed from the ignition switch.  
Take care not to put anything in contact  
with the courtesy lamp.  
All courtesy lamps come on when the vehicle is  
unlocked, when one of the corresponding doors  
is opened and when locating the vehicle using  
the remote control.  
They fade to off after the ignition is switched on  
and when the vehicle is locked.  
Take care not to allow objects to come  
into contact with the courtesy lamp.  
86