Ease of use and comfort
Lower fixings (behind row 2)
Seating area fittings
High load retaining net
This allows the use of the entire loading capacity,
up to the roof:
– behind the front seats in row 1, when the rear
seats (and bench seats) in rows 2 and 3 are
folded or removed,
– behind the rear seats (and bench seats) in row
2, when the rear seats (and bench seats) in row
3 are folded or removed.
► On each side in row 2, insert the fixings in the
floor anchorages (as shown above).
If your vehicle has seats and bench seats or
individual seats on rails:
► Use the stowing rings.
Fit the net
Unclip the upper fixing covers and secure the
lower fixings (as previously described).
► Fold (table position) the seats and bench
seats in rows 2 and 3 (according to equipment).
► Close the rear heating and air conditioning
vents (depending on the equipment you have).
► Unroll the high load retaining net.
► Position the net upper fixings in the
corresponding anchorages in the roof (first one
side, then the other).
Upper fixings
► Unclip the anchorage cover in the roof on
each side.
► Fully extend the straps.
► On each side in row 2, insert the fixings in the
floor anchorages then turn them a quarter turn to
lock them in place (as shown above).
Place them as close as possible to the end of
the rail.
► On each side, attach the bottom fixings of the
net to the lower anchorages (behind row 1) or in
the stowing rings (behind row 2).
► Tension the straps to extend the net.
► Check that the net is attached securely and
properly extended.
Lower fixings (behind row 1)
If your vehicle has fixed one-piece bench seats
or seats and bench seats:
72
English 
