Maintenance
AIR CLEANER
Filter replacement
Type A
2. Remove the used filter and wipe the
inside of the air cleaner housing to
remove dust in cover housing.
3. Replace the new filter with clean
hands and ensure the rubber gasket
is not taken off.
4. Reassemble in the reverse order of
removal.
OAC3089009TU
The air cleaner filter can be cleaned for
inspection using compressed air.
Do not attempt to wash or to rinse it, as
water will damage the filter.
If soiled, the air cleaner filter must be
replaced.
OAC3089050TU
5. The protrusions in the filter should
be mounted either on the left or right
side of the air cleaner upper side. If
incorrectly installed to the bottom
side, it may be difficult to assemble.
OAC3089010TU
OAC3089011TU
1. Remove the cleaner cover by open-
ing the clips.
9-20
English 
