09
2. Loosen the light assembly retaining
Type B
screws with a cross-tip screwdriver.
3. Remove the rear combination light
assembly from the body of the vehi-
cle.
OAC3N083058TU
(1) Tail Light
(2) Stop Light
(3) Turn signal light
(4) Reflex Reflector Light
(5) Rear fog Light
(6) Back-up Light
OAC3089041TU
[1] : Turn Signal Light, [2] : Tail/Stop Light
4. Remove the socket from the assem-
bly by turning the socket counter-
clockwise until the tabs on the socket
align with the slots on the assembly.
Turn Signal Light, Tail/Stop Light
5. Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
6. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
OAC3089048TU
7. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn
the socket clockwise.
8. Reinstall the light assembly to the
body of the vehicle.
OAC3089049TU
1. Open the tailgate
9-67
English 
