Get Maintenance -> Headlight, position light, turn signal light, fog light and daytime running light, low beam assist-static light bulb replacement Guide for Hyundai Bayon SUV Second Generation (2021-2024)

Type B

Headlight, Position Light,

Turn signal Light, Fog Light

and Daytime Running Light,

Low Beam Assist-Static light

bulb replacement

Type A

OAC3083023TU

Type C

OAC3083024TU

(1) Headlight (Low/High) *¹

(2) Turn Signal Light

(3) Daytime Running Light

& Position Light

OAC3N082023TU

(4) Front Fog Light (if equipped)

(1) Headlight (Low/High) *²

(2) Low Beam Assist-Static Light

(3) Turn Signal Light

(4) Daytime Running Light

& Position Light

*¹: MFR (Multi Focus Reflector) Head-

light

(5) Front Fog Light (if equipped)

*²: Bi-Function Projection Headlight

9-57

Maintenance

Headlight (Low/High)

1. Turn the front tyre at a right angle.

OLMB073042L

WARNING

OAC3089042TU

OAC3089043TU

OAC3089044TU

• Handle halogen bulbs with care.

Halogen bulbs contain pressur-

ized gas that will produce flying

pieces of glass that could cause

injuries if broken.

• Wear eye protection when chang-

ing a bulb. Allow the bulb to cool

down before handling it.

• Always handle them carefully, and

avoid scratches and abrasions. If the

bulbs are lit, avoid contact with liq-

uids.

• Never touch the glass with bare

hands. Residual oil may cause the

bulb to overheat and burst when lit.

• A bulb should be operated only when

installed in a headlight.

• If a bulb becomes damaged or

cracked, replace it immediately and

carefully dispose of it.

2. Remove the Wheel guard clips (B),

bumper cover bolt (A) and bumper

upper cover bolt (C).

3. Push the wheel guard aside and re-

move the headlight bulb cover by

turning it counterclockwise.

9-58

Type A

Information

Bi-Function projection headlight

This headlight is bi-function type that

switches the low beam to high or the

high beam to low using solenoid sys-

tem. So, the moving sound may be

heard when the headlight switches the

low beam to high or the high beam to

low and it does not indicate malfunc-

tion of the headlight.

OAC3089045TU

Type B,C

Type A

OAC3089051TU

[1] : Headlight

OAC3089035TU

Type B,C

4. Disconnect the headlight bulb sock-

et-connector.

5. Unsnap the headlight bulb retaining

wire by depressing the end and

pushing it upward.

6. Remove the bulb from the headlight

assembly.

7. Install a new headlight bulb and snap

the headlight bulb retaining wire into

position by aligning the wire with the

groove on the bulb.

OAC3089036TU

[2] : Low Beam Assist-Static Light

[3] : Turn signal light

8. Connect the headlight bulb socket

connector.

9. Install the headlight bulb cover by

Turn signal light, Low Beam

Assist-Static Light

1. Open the bonnet.

2. Remove the turn signal light or low

beam assist-static light bulb cover by

turning it counterclockwise.

turning it clockwise.

10. Install the wheel guard in the re-

verse order.

9-59

Maintenance

3. Remove the socket from the assem-

bly by turning the socket counter-

clockwise until the tabs on the socket

align with the slots on the assembly.

2. Reach your hand into the back of the

front bumper.

3. Disconnect the power connector

from the socket.

4. Insert a new bulb by inserting it into

the socket and rotating it until it locks

into place.

5. Install the socket in the assembly by

aligning the tabs on the socket with

the slots in the assembly.

Push the socket into the assembly

and turn the socket clockwise.

6. Install the turn signal light or low

beam assist-static light bulb cover by

turning it clockwise.

4. Remove the bulb-socket from the

housing by turning the socket coun-

terclockwise until the tabs on the

socket align with the slots on the

housing.

5. Install the new bulb-socket into the

housing by aligning the tabs on the

socket with the slots in the housing.

Push the socket into the housing and

turn the socket clockwise.

6. Connect the power connector to the

socket.

7. Reinstall the front bumper under

Daytime Running Light &

Position Light, Front Fog Light

(if equipped)

cover.

Daytime Running Light &

Position Light

(LED Type, if equipped)

Daytime Running Light & Position Light

Your vehicle is equipped with LED

lights. LED lights do not have replace-

able bulbs. If the LED light does not op-

erate, we recommend that the vehicle

be checked by a HYUNDAI authorised

repairer.

OAC3089038TU

Front Fog light

OAC3089037TU

1. Remove the under cover by rotating

the screws and bolts.

9-60

Maintenance -> Headlight, position light, turn signal light, fog light and daytime running light, low beam assist-static light bulb replacement for Your Hyundai Bayon SUV Second Generation (2021-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals