09
Multi fuse (Main fuse)
Engine compartment panel
fuse replacement
OAC3089018TU
OAC3089017TU
If the multi fuse is blown, it must be re-
1. Turn the vehicle off.
2. Turn all other switches OFF.
moved as follows:
1. Turn the vehicle off.
2. Disconnect the negative battery ca-
ble.
3. Remove the fuse panel cover by
pressing the tab and pulling it up.
3. Remove the fuse panel cover by
pressing the tab and pulling up.
4. Check the removed fuse; replace it if
it is blown. To remove or insert the
fuse, use the removal tool in the en-
gine compartment fuse panel cover.
5. Push in a new fuse of the same rat-
ing, and make sure it fits tightly in the
clips. If it fits loosely, we recommend
that you consult a HYUNDAI autho-
rised repairer.
4. Remove the nuts shown in the pic-
ture above.
5. Replace the fuse with a new one of
the same rating.
6. Reinstall in the reverse order of re-
moval.
If the multi fuse is blown, we recom-
mend that you consult a HYUNDAI au-
thorised repairer.
NOTICE
After checking the fuse panel in the
engine compartment, securely
install the fuse panel cover. You may
hear a clicking sound if the cover is
securely latched. If it is not securely
latched, electrical failure may occur
from water contact.
9-41
English 
