2023-2026 Hyundai Kona SUV Convenience Features User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Convenience Features for Your Hyundai Kona SUV Second Generation (2023-2026)

5. Convenience Features  
Accessing Your Vehicle  
Smart key  
Type A  
2C_SmartKeyOverview_3  
Type B  
2C_SmartKeyOverview  
Type D  
2C_SmartKeyOverview_2  
Convenience Features 151  
Your HYUNDAI uses a smart key that is used to lock or unlock the driver's and passenger's  
doors and the rear liftgate, and start the engine.  
1. Door lock  
2. Door unlock  
3. Liftgate open/close  
4. Panic  
5. Remote start  
6. Remote Smart parking Assist (Forward/Backward)  
Locking your vehicle (1)  
Button type  
2C_OutsideDoorHandleTouch  
1
Close all doors, hood, and liftgate.  
2 Have the smart key with you.  
3 Press the door handle button or press the Door Lock button (1) on the smart key. The  
hazard warning lights blink.  
4 Make sure the doors are locked by pulling the outside door handle.  
Touch sensor type  
if equipped  
2C_OutsideDoorHandleTouch_3  
1
Close all doors, hood, and liftgate.  
2 Have the smart key with you.  
152 Convenience Features  
3 Touch the door handle touch sensor to activate the door lock or press the Door Lock  
button (1) on the smart key. The hazard warning lights blink.  
4 Make sure the doors are locked by pulling the outside door handle.  
Information  
• The door handle button or touch sensor only operates when the smart key is within 40  
inches (1 m) from the outside door handle.  
• If you lock the doors using the door handle button or touch sensor, the doors will not  
lock under the following circumstances:  
- The smart key is in the vehicle.  
- The Engine Start/Stop button is in the ACC or ON position.  
- Any door is open (except for the liftgate).  
If this occurs, a chime sounds for about 3 seconds. Check the vehicle before  
attempting to lock the vehicle again.  
Information  
Before you leave your vehicle with the smart key, verify that your vehicle is locked. When  
using the touch sensor on the front door handle, listen to hear that the lock has actuated,  
and then pull the handle within 3 seconds to confirm the doors are locked.  
(If it has been longer than 3 seconds, verify the doors are locked by pressing the lock  
button on the smart key. You can hear a single beep.)  
WARNING  
Do not leave the smart key in your vehicle with children that are unattended or  
unsupervised.  
Children could unintentionally press the Engine Start/Stop button or could operate the  
power windows or other vehicle controls or even cause the vehicle to move. This may  
result in serious injury or death.  
Unlocking your vehicle (2)  
Button type  
2C_OutsideDoorHandleTouch  
Convenience Features 153  
1
Have the smart key with you.  
2 Press the door handle button or press the Door Unlock button (2) on the smart key. The  
hazard warning lights blink.  
• If you unlock the doors using the passenger side door handle, all the doors are  
unlocked. If you unlock the doors using the driver side door handle, either the  
driver's side door is unlocked or all the doors are unlocked depending on the setting  
for the Two Press Unlock feature. Change the Driver Door unlock mode by referring  
to “Setting the Two Press Unlock feature”.  
Touch sensor type  
if equipped  
2C_OutsideDoorHandleTouch_2  
1
Have the smart key with you.  
2 Grab the door handle to activate the door unlock touch sensor. The hazard warning  
lights blink two times.  
• If you unlock the doors using the passenger side door handle, all the doors are  
unlocked. If you unlock the doors using the driver side door handle, either the  
driver's side door is unlocked or all the doors are unlocked depending on the setting  
for the Two Press Unlock feature. Change the Driver Door unlock mode by referring  
to “Setting the Two Press Unlock feature”. If you dip your hand twice inside the door  
handle, all doors will unlock.  
Information  
The door handle button or touch sensor only operates when the smart key is within 40  
inches (1 m) from the outside door handle.  
• After unlocking the doors, the doors are locked automatically after 30 seconds unless a  
door is opened.  
• The infotainment system may change after software updates. For more information,  
refer to the manual provided in the infotainment system and the quick reference guide.  
• If the handle inner sensor is covered and the outside handle is pressed at the same  
time, the door may not lock or unlock for about 2 seconds. Be sure to only touch the  
inner sensor to unlock or the outer sensor to lock, not both at once unless intentionally  
setting the lock/unlock prevention feature.  
154 Convenience Features  
Setting the Two Press Unlock feature  
You can activate or deactivate the Two Press Unlock feature from the Settings menu in the  
infotainment system. SelectSetup > Vehicle > Door > 2 Press Unlock.  
Information  
The infotainment system may change after software updates. For more information, refer  
to the user's manual provided in the infotainment system and the quick reference guide.  
Setting the door lock/unlock prevention feature  
The doors may lock or unlock if the touch sensor of the outside door handle is recognized  
while washing your vehicle or due to heavy rain.  
To prevent unintentional door lock or unlock:  
Press the lock button on the smart key and immediately press the unlock button along  
with the lock button for more than 4 seconds. The hazard warning lights blink four times.  
At this time, the doors do not lock or unlock even though the touch sensor is touched on  
the outside door handle. To deactivate the function, press the door lock or unlock button  
on the smart key.  
Information  
• During a car wash or rain, in order to minimize unintentional operation of the touch  
sensor, the touch sensor may become insensitive. This is not a malfunction.  
• The doors may not lock or unlock in the following situations.  
- If the touch sensor is touched with gloves on.  
- If the door is suddenly approached.  
Smart key reminder  
If the doors are locked with the central door lock/unlock button with the smart key in the  
vehicle and a door open, the doors do not lock.  
Opening the liftgate (3)  
if equipped  
To open the liftgate:  
1
Have the smart key with you.  
2 Press the liftgate open button on the vehicle or press and hold the Liftgate open/close  
button (3) on the smart key for more than 1 second. The hazard warning lights blinks  
two times and the liftgate open.  
To close the liftgate:  
Press and hold the Liftgate open/close button (3) on the smart key to close the opened  
liftgate. If you release the button while the liftgate is being closed, it stops working and  
the chime sounds for about 5 seconds.  
Information  
The Liftgate open/close button only operates when the smart key is within 40 inches (1 m)  
from the liftgate.  
Convenience Features 155  
Using panic alarm (4)  
The horn sounds and the hazard warning lights blink for about 30 seconds if this button  
(4) is pressed for more than 1 second. To stop the horn and lights, press any button on the  
smart key.  
Remotely starting vehicle (5)  
To start the vehicle remotely:  
1
Press the door lock button on the smart key within about 32 ft. (10 m) from the vehicle.  
2 Press the Remote Start button (4) on the smart key within 2 seconds from when you  
have pressed the door lock button. The engine starts.  
3 To turn off the engine, press the Remote Start button (4) once.  
Information  
• The vehicle must be in P (Park) for the remote start function to start.  
• The vehicle displays “Smart key must be present to keep the vehicle running“ if you get  
on the vehicle without a registered smart key.  
• The vehicle turns off if you do not get in the vehicle within 10 minutes after remotely  
starting the vehicle.  
• The Remote Start button (4) may not operate if the smart key is not within 32 ft. (10 m)  
from the vehicle.  
• The vehicle does not remotely start if the hood or liftgate is open.  
• Do not idle the engine for a long time.  
• The vehicle can also be remotely started through the Bluelink subscription. For more  
information, refer to the Bluelink manual.  
Remotely moving vehicle forward or backward (6)  
if equipped  
Some models are equipped with the Remote Smart Parking Assist feature.  
With the smart key, the vehicle can be moved forward or backward remotely to enter or  
exit a tight parking space.  
For more information, refer to the “Remote Smart Parking Assist (RSPA)” section in  
chapter 7.  
Starting the vehicle  
Your vehicle is equipped with Engine Start/Stop button instead of a key cylinder. You  
can leave your smart key in your pocket or purse when you start your vehicle. For more  
information, refer to the “Engine Start/Stop button" section in chapter 6.  
Information  
If the smart key is not moved for some time, the detection function for smart key  
operation will pause. Lift the smart key to activate the detection again.  
156 Convenience Features  
NOTICE  
To prevent damaging the smart key:  
• Keep the smart key in a cool, dry place to avoid damage or malfunction. Exposure  
to moisture or high temperature may cause the internal circuit of the smart key to  
malfunction. This may not be covered under warranty.  
• Avoid dropping or throwing the smart key.  
• Protect the smart key from extreme temperatures.  
Key cylinder (Driver door)  
A key cylinder is located on the driver side door handle hidden behind a plastic cover.  
For more information, refer to the "Using the mechanical key" section in this chapter on  
opening the door with the mechanical key.  
Loss of a smart key  
A maximum of two smart keys can be registered to a single vehicle. If you happen to  
lose your smart key, you should immediately take the vehicle and remaining key to your  
authorized HYUNDAI dealer or tow the vehicle, if necessary.  
Smart key precautions  
The smart key may not work if any of the following occur:  
• The smart key is close to a radio transmitter such as radio station or airport that may  
interfere with normal operation of the transmitter.  
• The smart key is near a mobile two way radio system or a mobile phone.  
• Another vehicle's smart key is being operated close to your vehicle.  
• The smart key is near any normal electronic devices or credit cards.  
• The vehicle battery is discharged.  
• Connecting an external device to the power outlet and placing the smart key near the  
external device.  
• If your windows are tinted, especially with metallic window tint, it may cause frequency  
interference, reducing the smart key operating range.  
• Make sure the smart key battery is inserted in the correct polarity before use. Using an  
improperly positioned battery may cause smart key failure or premature discharge of  
the battery.  
If the smart key does not work correctly, open and close the door with the mechanical key.  
Convenience Features 157  
2C_StartVehicleWithPushingSmartKey  
To start the engine, press the Engine Start/Stop button directly with the smart key. If you  
have a problem with the smart key, contact an authorized HYUNDAI dealer.  
If the smart key is in close proximity to your mobile phone, the signal could be blocked  
by your mobile phone's normal operational signals. This is specifically relevant when  
the phone is active such as making and receiving calls, text messaging, and/or sending/  
receiving emails. When possible, avoid keeping the smart key and your mobile phone in  
the same location such as a pants or jacket pocket to avoid interference between the two  
devices.  
NOTICE  
• Keep the smart key away from electromagnetic materials that blocks electromagnetic  
waves to the key surface.  
• Always have the smart key with you when leaving the vehicle. If the smart key is left  
near the vehicle, the vehicle battery may be discharged.  
Information  
This device complies with Part 15 of the FCC rules.  
Operation is subject to the following three conditions:  
1
This device may not cause harmful interference.  
2 This device must accept any interference received, including interference that may  
cause undesired operation.  
3 Changes or modifications not expressly approved by the party responsible for  
compliance could void the user's authority to operate the device.  
Replacing the battery  
Battery type: CR2450  
To replace the battery:  
158 Convenience Features  
1
Insert a slim tool into the slot (1) and gently open the rear cover.  
2C_RemoveSmartKeyCover  
2 Remove the old battery and insert a new battery. Make sure the battery position is  
correct. An improperly positioned battery may discharge the battery, causing smart  
key failure.  
2C_ReplaceSmartKeyBattery  
3 Reinstall the rear cover of the smart key.  
If you suspect your smart key might have sustained some damage or you feel your smart  
key is not working correctly, contact an authorized HYUNDAI dealer.  
WARNING  
This product contains a button battery.  
If swallowed, a lithium button battery can cause severe or fatal injuries within 2 hours.  
Keep batteries out of reach of children.  
If you think batteries may have been swallowed or placed inside any part of the body,  
seek immediate medical attention.  
Convenience Features 159  
Information  
An inappropriately disposed battery may be harmful to the environment and human  
health. Always dispose of a used battery according to your local law(s) and regulations.  
Immobilizer system  
The immobilizer system helps protect your vehicle from theft. If an improperly coded key  
(or other device) is used, the engine's fuel system is disabled.  
When the Engine Start/Stop button is in the ON position, the immobilizer system indicator  
should come on briefly, then go off. If the indicator starts to blink, the system does not  
recognize the coding of the key.  
Press the Engine Start/Stop button to the OFF position, then to the ON position again.  
The system may not recognize your key's coding if another immobilizer key or other metal  
object (e.g. key chain) is near the key. The engine may not start because the metal may  
interrupt the transponder signal from transmitting normally.  
If the system repeatedly does not recognize the coding of the key, contact an authorized  
HYUNDAI dealer.  
Do not attempt to modify this system or add other devices to it. Electrical problems may  
occur making your vehicle inoperable.  
WARNING  
To prevent theft of your vehicle, do not leave spare keys anywhere in your vehicle. Your  
immobilizer password is a customer unique password and should be kept confidential.  
NOTICE  
Avoid exposing the key to moisture, static electricity, and rough handling. The  
Immobilizer system may malfunction.  
Information  
This device complies with Part 15 of the FCC rules. Operation is subject to the following  
three conditions:  
1
This device may not cause harmful interference, and  
2 This device must accept any interference received, including interference that may  
cause undesired operation.  
3 Changes or modifications not expressly approved by the party responsible for  
compliance could void the user's authority to operate the device.  
160 Convenience Features  
Hyundai Digital Key 2 Touch  
if equipped  
Hyundai digital key provides convenience to the driver, which the driver can use to lock or  
unlock the driver and passenger doors, and turn on the vehicle.  
Digital key (smartphone)  
Information  
• Hyundai Digital Key 2 Touch is only available on smartphone that support digital  
key functions, and digital key functions of smartphones are provide by smartphone  
manufacturers.  
• Available smartphone brands and models can be found on smartphone manufactures'  
website or HYUNDAI website.  
• Depending on the availability of service on the vehicle, some functions may not  
operate.  
Setting your smartphone  
To use the digital key (smartphone), download the Bluelink App and sign up Hyundai  
account and service.  
For more information about Bluelink, refer to the infotainment system guide.  
Registering your digital key (smartphone)  
1
Turn on the vehicle with a smart key and have your smart key with you in the vehicle.  
2 After selecting Digital Key > Set Up Digital Key from the My Hyundai App in the  
smartphone, register the digital key according to the guidance in the smartphone  
screen.  
• Place your smartphone on the vehicle authentication pad (wireless charging pad)  
with the screen facing up.  
2C_WirelessChargingPad  
[A] Vehicle authentication pad (Wireless charging pad)  
• When the digital key (smartphone) is saved, a message appears on the infotainment  
system screen.  
Convenience Features 161  
Information  
• The NFC Antenna position on Samsung device can be found in the following path:  
Settings > Connections > NFC and contactless payments.  
• The NFC Antenna position on Google Pixel phone can be found in the following path:  
Settings > Connected devices > Connection preference > NFC.  
• The NFC Antenna position on Apple iPhone is located at the top of the rear [A] and  
Apple WATCH is located at the center of the screen [B].  
2C_SmartPhoneSample  
• Ensure that the NFC Antenna position on the smartphone is in contact with the  
vehicle authentication pad (wireless charging pad).  
• The location of the NFC Antenna on the smartphone may vary by phone model, so  
please contact the smartphone manufacturer for details.  
• NFC communication may not work for some smartphones depending on the internal  
structure of the smartphone. Move the smartphone to the left or right of the indoor  
authentication pad (wireless charging pad) to operate.  
To register the digital key (smartphone) from the infotainment system  
2C_AVNRegisterSmartPhone  
If you cannot register the digital key (smartphone) with the My Hyundai app, try  
registering from the infotainment system.  
1
Turn off the vehicle, and then turn on the vehicle with a smart key and have your smart  
key with you in the vehicle.  
2 Put the gear in P (Park), from the infotainment system Settings menu, select Setup >  
Vehicle > Digital key > Smartphone key and press the Save button.  
3 Place your smartphone on the vehicle authentication pad (wireless charging pad) with  
the screen facing up.  
162 Convenience Features  
• When the digital key (smartphone) is saved, a message appears on the infotainment  
system screen.  
Information  
• If you want to register a different digital key (smartphone), refer to "Deleting your  
digital key (smartphone)" and delete the digital key (smartphone) before re-registering.  
An active Digital Key can be shared through the My Hyundai app with a different  
smartphone.  
• During the digital key saving process, the process may cancel when:  
- The smartphone is removed from the vehicle authentication pad (wireless charging  
pad)  
- The infotainment system screen is changed  
- The engine is turned off  
- The gear is shifted  
• The registering process does not start if a smart key is not in the vehicle.  
• Some smartphones may not start the registering process depending on the internal  
structure. Move the smartphone to the left or right on the vehicle authentication pad  
(wireless charger pad) and try registering the smartphone.  
Using the digital key (smartphone)  
The driver can lock or unlock the door by placing the smartphone on the outside  
door handle, and the vehicle can be started by placing the smartphone on the vehicle  
authentication pad (wireless charging pad).  
Samsung smartphone  
2C_OutsideDoorHandleTouchBySmartPhone  
[A] Door handle authentication pad  
[B] NFC Antenna  
Convenience Features 163  
Apple iPhone  
2C_OutsideDoorHandleTouchBySmartPhone_2  
[A] Door handle authentication pad  
[B] NFC Antenna  
Information  
• The location of the NFC Antenna on the smartphone may vary by phone model, so  
please contact the smartphone manufacturer for details.  
• The NFC Antenna position on Samsung device can be found in the following path:  
Setup > Connections > NFC and contactless payments.  
• The NFC Antenna position on Google Pixel phone can be found in the following path:  
Settings > Connected devices > Connection preference > NFC.  
• The NFC Antenna position on Apple iPhone is located at the top of the rear [A] and  
Apple WATCH is located at the center of the screen [B].  
2C_SmartPhoneSample  
• Touch the Door handle NFC Antenna position with the back of your smartphone.  
Locking/Unlocking the doors  
• If the driver places the digital key (smartphone) NFC antenna to the driver's or  
passenger's door handle authentication pad for more than 2 seconds, the door locks or  
unlocks.  
• After unlocking the doors, the doors are automatically re-lock after 30 seconds unless a  
door is opened.  
164 Convenience Features  
• If the smartphone digital key does not operate, try again after moving the smartphone  
away from the door handle authentication pad (more than 4 in. (0.1 m)).  
Information  
You cannot lock your vehicle using the digital key (smartphone) if any of the following  
occurs:  
• The smart key is in the vehicle.  
• The Engine Start/Stop button is in the ACC or ON position.  
• Any of the doors, hood, or liftgate are open.  
Starting the vehicle  
After placing your registered digital key (smartphone) on the vehicle authentication pad  
(wireless charging pad), depress the brake pedal and press the Engine Start/Stop button.  
After starting the vehicle, the digital key (smartphone) may be removed from the vehicle  
authentication pad (wireless charging pad).  
For more details on the basic way to start the vehicle, refer to the “Engine Start/Stop  
button” section in chapter 6.  
Information  
If a shared digital key (smartphone) is used for the first time, the activating time may take  
longer.  
• Place the shared digital key (smartphone) on the door handle authentication pad until  
the vehicle door lock/unlock activates.  
• If a shared digital key (smartphone) is first used on the vehicle authentication pad  
(wireless charger pad), the initial start of the vehicle may fail.  
• If the door lock/unlock is activated once with the shared digital key (smartphone) or the  
vehicle is started with the digital key (smartphone) on the vehicle authentication pad,  
the digital key (smartphone) is registered in the vehicle.  
WARNING  
The vehicle can be started when the registered smartphone is placed on the vehicle  
authentication pad (wireless charging pad). Therefore, do not leave unsupervised children  
or people who are not aware of the system since it can result in serious injury or death. In  
addition, always have the registered smartphone with you to prevent vehicle theft when  
leaving the vehicle.  
Deleting your digital key (smartphone)  
Turn on the vehicle with a smart key. Have your smart key with you in the vehicle.  
Convenience Features 165  
Deleting all registered digital key (smartphone)  
2C_AVNDeleteDegitalKey  
To delete all the registered digital key (smartphone), from the Settings menu select Setup  
> Vehicle > Digital Keys > Smartphone key > Delete all in the infotainment system.  
• The "Delete all" button is disabled if there is no registered digital key (smartphone).  
Deleting my registered digital key (smartphone)  
2C_AVNDeleteMySmartPhone  
To delete only my registered digital key (smartphone), from the Settings menu select  
Setup > Vehicle > Digital Keys > Smartphone key > My Smartphone Key > Delete in the  
infotainment system.  
• If a shared digital key (smartphone) is registered, it cannot be deleted.  
• A new smartphone can be registered after deleting the existing digital key  
(smartphone) from "My Smartphone Key" menu.  
Information  
• If the registered digital key (smartphone) is deleted, the digital key saved in the  
smartphone is also deleted.  
• If the digital key is deleted from the smartphone, the digital key (smartphone)  
registered in the vehicle is also deleted.  
• The shared digital key registered in the vehicle cannot be deleted individually.  
• Even though the Blue Link® App is deleted from the smartphone, the digital key saved  
in the smartphone is not deleted.  
• Management of the digital key saved in the smartphone is available from the Digital  
Key App provided by the smartphone manufacturer.  
166 Convenience Features  
Digital key (Card key)  
How to register Digital key (Card Key)  
To use the card key as a digital key, follow the following procedure.  
2C_AVNRegisterCardKey  
2C_WirelessChargingPad  
[A] Vehicle authentication pad (Wireless charging pad)  
1
Have both of your smart keys with you in the vehicle.  
2 Select Setup > Vehicle > Digital Keys > NFC Card Key from the Settings menu, and  
check whether " Use" is selected in the infotainment system.  
3 Place your card key on the vehicle authentication pad (wireless charging pad) while the  
engine is on.  
4 Register your card key by selecting Setup > Vehicle > Digital Keys > NFC Card Key >  
Save from the Settings menu in the infotainment system.  
Information  
• Only one digital key (card key) can be registered to the vehicle. If it must be replaced,  
delete the existing card key before registering the new card key.  
• To register a digital key (card key), both of your smart keys must be in the vehicle.  
• Once a digital key (card key) is registered, it cannot be registered in another vehicle. It  
is possible to re-register it to the original vehicle.  
Convenience Features 167  
Using the digital key (card key)  
The driver can lock or unlock the door by placing the card key on the outside door handle,  
and the vehicle can be started by placing the card key on the vehicle authentication pad  
(wireless charging pad).  
2C_CardKey  
[A] Door handle authentication pad  
[B] Card key NFC Antenna  
Locking/Unlocking the doors  
If the driver places the digital key (card key) to the driver's or passenger's door handle  
authentication pad for more than 2 seconds, the door locks or unlocks.  
After unlocking the doors, the doors are automatically re-locked after 30 seconds unless a  
door is opened.  
Information  
You cannot lock your vehicle using the digital key (card key) if any of the following occurs:  
• The smart key is in the vehicle.  
• The Engine Start/Stop button is in the ACC or ON position.  
• Any of the doors, hood, or liftgate are open.  
Starting the vehicle  
After placing your registered digital key (card key) on the vehicle authentication pad  
(wireless charging pad), depress the brake pedal and press the Engine Start/Stop button.  
For more information on the basic way to start the vehicle, refer to the “Engine Start/Stop  
button” section in chapter 6.  
WARNING  
The vehicle can be started when the registered card key is placed on the vehicle  
authentication pad (wireless charging pad). Therefore, do not leave unsupervised children  
or people who are not aware of the system since it can result in serious injury or death.  
In addition, always have the registered card key with you to prevent vehicle theft when  
leaving the vehicle.  
168 Convenience Features  
NOTICE  
• The digital key (card key) may not work under the following conditions:  
- The digital key (card key) is not placed on the door handle authentication pad or  
vehicle authentication pad (wireless charging pad) correctly.  
- The digital key (card key) is near NFC-enabled cards such as credit cards or  
smartphones.  
If the digital key (card key) does not work, try again after moving the digital key (card  
key) away from the door handle authentication pad (more than (4 in. (0.1 m)).  
• The digital key (card key) can be damaged by impacts. If the digital key (card key) is  
damaged, replace the digital key (card key) with a new one and register it again.  
• Long-time exposure to high temperature may cause the digital key (card key) to  
malfunction. Be careful not to expose the digital key (card key) to direct sunlight or  
high temperature.  
• Leaving the digital key (card key) on the in-vehicle authentication pad (wireless  
charging pad) while driving may cause the digital key (card key) to malfunction.  
Remove the digital key (card key) from the in-vehicle authentication pad (wireless  
charging pad) after starting the vehicle.  
• Keep the digital key (card key) away from the smartphone when charging the  
smartphone. If the digital key (card key) is placed between the smartphone and the  
in-vehicle authentication pad (wireless charging pad) while the smartphone is being  
charged, the digital key (card key) may malfunction. For example, when charging  
smartphone while the digital key (card key) is attached to the back of the smartphone  
case.  
Deleting your digital key (card key)  
2C_AVNDeleteCardKey  
1
Turn on the engine with a smart key. Have your smart key with you in the vehicle.  
2 From the infotainment system settings menu, select Setup > Vehicle > Digital Keys >  
NFC Card Key > Delete.  
• The "Delete" button is disabled if there is no digital key (card key) registered.  
Personalized profile and vehicle settings  
You can set the registered digital key (smartphone) profiles for Driver 1 and Driver 2.  
When you use the digital key (smartphone), the vehicle can be set to the user-defined  
personalized profile (includes items such as vehicle settings and audio preferences).  
Convenience Features 169  
Linking/Unlinking profile  
How to link user profile  
1
Select Setup > User Profile > Profile Settings > Link Digital Key (Smartphone) from the  
Settings menu in the infotainment system.  
2 Select "Link" to connect the registered smartphone's digital key and the user's profile.  
3 Follow the instructions according to the message on the infotainment system screen.  
How to unlink user profile  
Select Setup > User Profile > Profile Settings, and then deselect " Link Digital Key  
(Smartphone)" from Settings menu in the infotainment system.  
• Unlinking is possible only when user profile is linked.  
Information  
• User profile cannot be linked to both Driver 1 and Driver 2 that are connected to single  
smartphone. Personalization operates with the recently linked user profile, and the  
previously linked user profile will be automatically canceled.  
• User profile link works only when the digital key is registered to the vehicle.  
• Digital key (card key) cannot be linked with a user profile.  
• If the user profile linked digital key in the smartphone is deleted, the digital key should  
be re-registered and personalized by linking the user profile again.  
Vehicle personalization operation  
• The personalization function linked with digital key works when the profile linked  
smartphone is placed on the outside door handle authentication pad to lock or unlock  
the doors.  
• The profile set by the digital key can be changed manually from the infotainment  
system.  
• The personalization function using the digital key can be operated after linking the  
digital key in the infotainment system profile menu.  
• The personalization function works only when the vehicle is OFF or when the vehicle  
is started remotely. If the vehicle is not started remotely, the personalization function  
does not work with the digital key.  
170 Convenience Features  
Information  
User profile operation according to door lock/unlock system is as follows:  
Item  
Initial value  
Personalization Operation  
Guest  
Profile linked smartphone key  
Profile unlinked smartphone key  
NFC card key  
Linked profile  
Recently activated profile  
Smart key  
Used vehicle/Digital key maintenance  
Purchasing used vehicle  
When purchasing a used vehicle, make sure to delete the smartphone key and card  
key registered by the previous user and inform the purchase of a used vehicle through  
Hyundai Customer Care Center.  
If the card key comes with the vehicle, check whether it operates properly.  
Digital Key maintenance  
If you need to repaired or replaced your Digital Key system, make sure your smartphone  
key is still active. You may have to pair your phone again using the HYUNDAI Digital Key  
app.  
Limitations of the system  
• HYUNDAI Digital Key app on the smartphone and card key may not work if:  
- Smartphone battery or the vehicle battery is discharged.  
- NFC or Bluetooth is turned off on the smartphone settings.  
- The card key is in a wallet or card holder, or overlapped with other cards.  
- If you use a smartphone cover that uses wireless communication or is made of  
metal, remove the smartphone cover.  
• The vehicle may not be controlled by the smartphone if any of the following occurs:  
- Other smartphone functions (calls,urgent call, audio or NFC payment), apps, or  
wireless earphones are operating.  
- The digital key app function such as basic setting or app launching is limited by the  
prior policy according to the manufacturer.  
Convenience Features 171  
Door Locks  
Operating door locks from outside the vehicle  
Using the mechanical key  
2C_UsingEmerengcyKey  
2C_UsingEmerengcyKey_2  
[A] Lock  
[B] Unlock  
To unlock:  
1
Pull the door handle (1).  
2 Press the release button (2) located inside the cover with a mechanical key.  
3 Carefully pull out the cover (3) while continuing to press the release button to remove  
the cover and expose the key cylinder.  
4 Insert the mechanical key into the key cylinder and rotate (4) clockwise to unlock the  
vehicle and counterclockwise to lock the vehicle.  
Once the doors are unlocked, they can be opened by pulling the door handle.  
Information  
Only the driver's door can be locked/unlocked using the mechanical key.  
172 Convenience Features  
NOTICE  
• When removing the key cylinder cover, avoid scratching or breaking the plastic material.  
• If the key cylinder cover freezes and cannot be removed easily, lightly tap on the cover  
or try to warm the cover by placing your hands around it and blowing warm air on it.  
• Do not apply excessive force to the door and door handle.  
Using the smart key  
For more information, refer to the "Smart key" section in this chapter.  
Information  
• In cold and wet climates, door lock and door mechanisms may not work properly due  
to freezing conditions.  
• If the door is locked/unlocked multiple times in rapid succession with either the vehicle  
key or door lock switch, the system may stop operating temporarily in order to protect  
the circuit and prevent damage to system components.  
In case of an emergency  
2C_HowToLockDoorInEmergency  
In case of emergency such as when the battery is discharged, the only way to lock the  
door(s) is with the mechanical key from the outside key hole.  
Doors without an outside key hole can be locked as follows:  
1
Open the door.  
2 Insert a small blade tool (e.g. screwdriver or similar) into the emergency door lock hole  
and turn it clockwise for left side door, or turn it counterclockwise for right side door.  
3 Close the door securely.  
Information  
If the electrical power door lock switch does not operate (e.g. discharged vehicle battery)  
and the liftgate is closed, you cannot open the liftgate until power is restored.  
Convenience Features 173  
Operating door unlocks from inside the vehicle  
With the door inside handle  
2C_InsideDoorHandleOverview  
Front door  
If the inner door handle is pulled when the door is locked, the door is unlocked and  
opened.  
Rear door  
If the inner door handle is pulled once when the door is locked, the door is unlocked. If  
the inner door handle is pulled once more, the door is opened.  
With the central door lock/unlock switch  
Driver's door  
2C_CentralDoorLockButton  
174 Convenience Features  
Front passenger's door  
2C_CentralDoorLockButton_2  
When pressing the  
portion (1) on the switch, all vehicle doors are locked.  
• If any door is opened, the doors are not locked even though the lock switch (1) of the  
door is pressed.  
When pressing the  
portion (2) on the switch, all vehicle doors are unlocked.  
WARNING  
• Always close and lock the doors while the vehicle is moving. If the doors are unlocked,  
the risk of being thrown from the vehicle in a collision increases.  
• Do not pull the inner door handle of the driver's or passenger's door while the vehicle is  
moving.  
WARNING  
Do not leave the elderly, children, or animals unattended in your vehicle. An enclosed  
vehicle can become extremely hot and the elderly, unattended children or animals who  
cannot escape the vehicle may be seriously injured or killed.  
WARNING  
Always park your vehicle properly. Depress the brake pedal, change the gear to P (Park),  
apply the parking brake, press the Engine Start/Stop button to the OFF position, close all  
windows, lock all doors, and always take the keys with you.  
WARNING  
Be careful when opening doors and watch for vehicles, motorcycles, bicycles, or  
pedestrians approaching the vehicle to prevent serious injury or death.  
Convenience Features 175  
Information  
To exit the vehicle if the power door lock does not function:  
• Operate the door unlock feature repeatedly (both electronic and manual) while  
simultaneously pulling on the door handle.  
• Operate the other door locks and handles.  
• Lower the driver's front window and use the mechanical key to unlock the door from  
outside.  
Auto Door Lock/Unlock features  
Impact sensing door unlock system  
All doors are automatically unlocked when an impact causes the airbags to deploy.  
Auto Lock Enable on speed  
When this feature is set in the infotainment system, all the doors will be locked  
automatically when the vehicle exceeds 9 mph (15 km/h).  
Child-protector rear door locks  
2C_ChildProtectRearDoorLockManual  
The child safety lock is provided to help prevent children seated in the rear from  
accidentally opening the rear doors.  
The rear door safety locks must be used whenever children are in the vehicle.  
The child safety lock is located on the edge of each rear door. When the child safety lock  
is in the lock position, the rear door does not open if the inner door handle is pulled.  
To lock the child safety lock, insert a small flat blade tool (e.g. screwdriver or similar) into  
the slot and turn it to the lock position as shown.  
To allow a rear door to be opened from inside the vehicle, unlock the child safety lock.  
WARNING  
Never allow children to open the rear doors while the vehicle is moving. They may fall out  
of the vehicle. Make sure to use the rear door safety locks whenever children are in the  
vehicle.  
176 Convenience Features  
Theft-Alarm System  
This system helps to protect your vehicle and valuables. The horn sounds and the hazard  
warning lights blinks continuously if any of the following occur:  
• A door is opened without using the smart key.  
• The liftgate is opened without using the smart key.  
• The hood is opened.  
The alarm continues for 30 seconds, then the system resets. To turn off the alarm, unlock  
the doors with the smart key.  
The Theft Alarm System automatically sets 30 seconds after you lock the doors and the  
liftgate. For the system to activate, you must lock the doors and the liftgate from outside  
the vehicle by doing one of the following:  
• Using the smart key.  
• Pressing the button on the outside door handle with the smart key in your possession.  
(available with button type)  
• Touching the touch sensor on the outside door handle with the smart key in your  
possession. (available with touch sensor type)  
The hazard warning lights blink and the chime sounds once to indicate the system is  
armed.  
Once the security system is set, opening any door, liftgate, or hood without using the  
smart key causes the alarm to activate.  
The Theft Alarm System is not set if the hood, liftgate, or door is not fully closed. If the  
system is not set, check the hood, liftgate, or doors are fully closed.  
Do not attempt to modify this system or add other devices to it.  
Information  
• Do not lock the doors until all passengers have left the vehicle. If a door is opened after  
the system is armed, the alarm is activated.  
• If the vehicle is not disarmed with the smart key, open the doors using the mechanical  
key and start the engine by pressing the Engine Start/Stop button with the smart key.  
• If the system is disarmed by unlocking the vehicle, and a door or the liftgate is  
not opened within 30 seconds, the doors are relocked and the system is rearmed  
automatically.  
Convenience Features 177  
Rear Occupant Alert (ROA)  
Rear Occupant Alert is provided to help prevent the driver from leaving with any rear  
passenger left in the vehicle.  
System setting  
To use Rear Occupant Alert, it can be enabled from the Settings menu in the infotainment  
system. Select:  
Setup > Vehicle > Convenience > Rear Occupant Alert  
Information  
The infotainment system may change after software updates. For more information, refer  
to the manual provided in the infotainment system and the quick reference guide.  
System operation  
When you turn off the engine and open the driver's door after opening and closing the  
rear door, the 'Check rear seats' warning message appears on the instrument cluster.  
WARNING  
Always check the rear seats before you leave the vehicle.  
The Rear Occupant Alert system does not actually detect the presence of objects or  
occupants in the rear seat but just informs you to check the rear seat by using the record  
of the rear door opening and closing.  
Information  
The record of the rear door opening and closing resets only when the driver turns the  
vehicle off and locks the vehicle door. Even if the rear door has not been reopened,  
an alert may occur if the door record is not reset. For example, if the driver opens the  
door and exits the vehicle again without locking the door after the Rear Occupant Alert  
operates, the alert may occur again.  
178 Convenience Features  
Steering Wheel  
Motor Driven Power Steering (MDPS)  
The system assists you with steering the vehicle. If the vehicle is turned off or if the  
power steering system becomes inoperative, you can still steer the vehicle, but it requires  
increased steering effort.  
If you notice any change in the effort required to steer during normal vehicle operation,  
contact an authorized HYUNDAI dealer.  
NOTICE  
If the Motor Driven Power Steering  
warning light and the message "Check  
motor driven power steering" illuminates on the instrument, you can continue to steer the  
vehicle, but it requires increased steering effort. Contact an authorized HYUNDAI dealer  
and have the system inspected as soon as possible.  
Information  
During normal vehicle operation:  
• The steering effort may be high immediately after pressing the Engine Start/Stop  
button the ON position.  
This happens as the system performs the MDPS system diagnostics. When the  
diagnostics are completed, the steering wheel effort returns to its normal condition.  
• When the battery voltage is low, you may have to use more effort to steer. This is a  
temporary condition and returns to normal condition after charging the battery.  
• A click noise may be heard from the MDPS relay after the Engine Start/Stop button is in  
the ON or OFF position.  
• Motor noise may be heard when the vehicle is at a stop or driving at low speeds.  
• When you operate the steering wheel in low temperatures, abnormal noise may occur.  
When the temperature rises, the noise disappears.  
• When an error is detected from MDPS, the steering effort assist function is not  
activated. Instrument cluster warning lights may illuminate or the steering effort may  
be high. If these symptoms occur, drive the vehicle to a safe location as soon as  
possible. Have your vehicle be inspected by an authorized HYUNDAI dealer as soon as  
possible.  
Tilt/Telescopic steering  
Adjust the steering wheel toward your chest, not toward your face. Make sure you can see  
the instrument cluster warning lights and gauges. After adjusting, push the steering wheel  
up and down to be in the locked position.  
WARNING  
Never adjust the steering wheel while driving. This may cause loss of vehicle control  
resulting in a collision.  
Convenience Features 179  
NOTICE  
While adjusting the steering wheel height, please do not push or pull it hard since the  
fixture can be damaged.  
Manual adjustment  
2C_AdjustSteeringWheelManual  
To adjust:  
1
Pull down the lock-release lever (1).  
2 Adjust the steering wheel to the desired angle (2) and distance forward/back (3).  
3 Pull up the lock-release lever up to lock the steering wheel in place.  
Information  
Sometimes the lock release lever may not engage completely. Pull down on the lock-  
release lever, readjust the steering wheel again, and then pull back up on the lock-release  
lever to lock the steering wheel in place.  
Steering wheel heater  
if equipped  
2C_SteeringWheelWarmerButton  
When the Engine Start/Stop button is in the ON position or when the engine is running,  
press the steering wheel heater button to warm the steering wheel.  
Press the button repeatedly to cycle through the temperature levels from high, low, and  
off.  
180 Convenience Features  
After a certain time in high setting, it will automatically reduce to Low.  
NOTICE  
• Do not install any cover or accessories on the steering wheel to prevent damage to the  
heated steering wheel system.  
• Do not strike the steering wheel surface with a sharp-pointed object. This may damage  
the heating element in the steering wheel.  
Horn  
2C_Horn  
To sound the horn, press the area indicated by the horn symbol on your steering wheel  
(see illustration). The horn operates only when this area is pressed.  
NOTICE  
Do not strike the horn severely to or hit it with your fist. Do not press on the horn with a  
sharp-pointed object.  
NOTICE  
Do not clean the steering wheel surface with the following products:  
• Organic solvents such as thinner, alcohol and gasoline  
• Chemical products such as leather cleaner, coating agent, and wax  
Haptic warning/Steering wheel vibration warning  
If haptic steering wheel is available, the Driver Assistance system vibrates the steering  
wheel to warn the driver when the system indicates hazardous situations.  
Setting haptic warning  
While the engine is on, select:  
Setup > Vehicle > Driver Assistance > Warning Methods > Haptic Warningin the  
infotainment system.  
Convenience Features 181  
Mirrors  
Inside rearview mirror  
Before driving your vehicle, check to see that your inside rearview mirror is properly  
positioned. Adjust the rearview mirror so that the view through the rear window is  
properly centered.  
WARNING  
Make sure your line of sight is not obstructed. Do not place objects in the rear seat, cargo  
area, or behind the rear head restraints that may interfere with your vision through the  
rear window.  
WARNING  
To prevent serious injury during a collision or deployment of the airbag, do not modify the  
rearview mirror and do not install a wide mirror.  
WARNING  
Never adjust the mirror while driving. This may cause loss of vehicle control and result in a  
collision.  
NOTICE  
When cleaning the mirror, use a paper towel or similar material dampened with glass  
cleaner. Do not spray glass cleaner directly on the mirror as this may cause the liquid  
cleaner to enter the mirror housing.  
Day/night rearview mirror  
if equipped  
2C_InsideRearViewMirrorDayNight  
[A] Day  
[B] Night  
Before driving at night, pull the day/night lever toward you to reduce glare from the  
headlights of the vehicles behind you.  
182 Convenience Features  
Remember that you lose some rearview clarity in the night position.  
Information  
The control is partially hidden behind the mirror.  
Electrochromic mirror  
if equipped  
2C_InsideRearViewMirrorECM  
[A] Sensor  
When the engine is running, the glare from vehicle headlights behind you is automatically  
controlled by the sensor mounted in the rearview mirror.  
When the gear is shifted to R (Reverse), the mirror automatically goes to the brightest  
setting in order to improve the driver's view behind the vehicle.  
Electrochromic mirror (ECM) with HomeLink® system  
if equipped  
Your vehicle may be equipped with a Gentex Automatic-Dimming Mirror with an  
Integrated HomeLink® Wireless Control System.  
During nighttime driving, this feature will automatically detect and reduce rearview mirror  
glare. The HomeLink® Universal Transceiver allows you to activate your garage door(s),  
electric gate, home lighting, etc.  
2C_ECMHomelink  
Convenience Features 183  
1. HomeLink Channel 1  
2. HomeLink Channel 2  
3. HomeLink Channel 3  
4. Garage Door Opener Status Indicator: Closing or Closed  
5. HomeLink Operation Indicator  
6. Garage Door Opener Status Indicator: Opening or Opened  
7. HomeLink User Interface Indicator  
Automatic-Dimming Night Vision Safety™ (NVS®) Mirror  
if equipped  
The NVS® Mirror automatically reduces glare by monitoring light levels in the front and  
the rear of the vehicle. Any object that obstructs either light sensor will degrade the  
automatic dimming control feature.  
For more information regarding NVS® mirrors and other applications, please refer to the  
Gentex website:  
www.gentex.com  
Your mirror will automatically dim upon detecting glare from the vehicles traveling behind  
you.  
The mirror defaults to the ON position each time the vehicle is started.  
Integrated HomeLink® Wireless Control System  
The HomeLink® Wireless Control System provides a convenient way to replace up to three  
handheld radio-frequency transmitters used to activate compatible devices such as gate  
operators, garage door openers, entry door locks, security systems, and home lighting.  
NOTICE  
HomeLink® operates while the Start/Stop button is in the ACC or ON position for safety  
reasons. It is to prevent unintentional security problems from happening when the vehicle  
is parked outside the garage.  
WARNING  
Before programming HomeLink® to a garage door opener or gate operator, make sure  
people and objects are out of the way of the device to prevent potential harm or damage.  
Do not use the HomeLink® with any garage door opener that lacks the safety stop and  
reverse features required by U.S. federal safety standards (this includes any garage door  
opener model manufactured before April 1, 1982). A garage door that cannot detect an  
object-signaling the door to stop and reverse-does not meet current U.S. federal safety  
standards. Using a garage door opener without these features increases the risk of serious  
injury or death.  
For more information, contact HomeLink® at www.homelink.com, or call Home-Link  
customer support at 1-800-355-3515.  
It is also recommended that a new battery be replaced in the handheld transmitter of the  
device being trained to HomeLink® for quicker training and accurate transmission of the  
radio frequency.  
184 Convenience Features  
1. Programming HomeLink®  
The following steps show how to program HomeLink. If you have any questions or are  
having difficulty programming your HomeLink buttons, refer to the HomeLink website or  
call the HomeLink customer support toll-free number. Do this, before going back to the  
dealer who sold you the vehicle.  
• Visit the HomeLink website at: www.homelink.com. Then at the top of the page,  
choose your vehicle make. Then watch the You Tube video, and/or access additional  
website information.  
• If you choose to access the website via your cell phone, scan the QR code.  
2C_ECMHomelinkQR  
• Or, call HomeLink customer support at 1-800-355-3515 (Please have the vehicle make/  
model AND the opener device make/model readily available.)  
1) Programming Preparation  
2C_ECMHomelink_2  
1
When programming a garage door opener, it is advised to park the vehicle outside of  
the garage.  
2 It is recommended that a new battery be placed in the handheld transmitter of the  
device being programmed to HomeLink for quicker training and accurate transmission  
of the radio-frequency signal.  
Convenience Features 185  
3 Press the Start/Stop button to the ACC (Accessory) position for programming of  
HomeLink.  
2) Programming a New HomeLink®  
2C_ECMHomelink_3  
1
Press and release the HomeLink button (1), (2) or (3), you would like to program.  
The HomeLink indicator light (7) will flash orange slowly (if not, perform the steps of  
“Erasing HomeLink Buttons” section, and start over).  
2C_ECMHomelink_4  
2 Position the garage door opener remote 1-3 inches (2-8 cm) away from the HomeLink  
buttons.  
3 While the HomeLink indicator light (7) is flashing orange, press and hold the handheld  
remote button. Continue pressing the handheld remote button until the HomeLink  
indicator light (7) light changes from orange to green. You may now release the  
handheld remote button.  
4 Wait until your garage door comes to a complete stop, regardless of position, before  
proceeding to the next steps.  
5 Press and release the HomeLink button you are programming and observe the  
indicator light.  
• If the indicator light remains solid green, your device should operate when the  
HomeLink button is pressed. At this point, if your device operates, programming is  
complete.  
• If the indicator light rapidly flashes green, firmly press, hold for two seconds and  
release the HomeLink button up to three times in a row slowly to complete the  
programming process. Do not press the HomeLink button rapidly. At this point if  
186 Convenience Features  
your device operates, programming is complete. If the device does not operate,  
continue with step 6.  
6 At the garage door opener motor, (security gate motor, etc.) locate the 'Learn', 'Smart',  
'Set' or 'Program' button. This can usually be found where the hanging antenna wire is  
attached to the motor-head unit (see the device's manual to identify this button). The  
name and color of the button may vary by manufacturer.  
2C_ECMHomelink_5  
[A] Learn button  
• A ladder and/or second person may simplify the following steps.  
7
Firmly press and release the 'Learn', 'Smart', 'Set' or 'Program' button. You now have up  
to 30 seconds in which to complete the next step.  
8 Return to the vehicle and firmly press, hold for two seconds and release, the HomeLink  
button up to three times in a row slowly. Do not press the HomeLink button rapidly.  
As soon as you see the garage door start to move, stop pressing any buttons until a  
few seconds after the garage door has come to a complete stop, regardless of position.  
At this point, programming is complete and your device should operate when the  
HomeLink button is pressed and released.  
3) Two-Way Communication Programming (For select garage door openers)  
If your garage door opener has the 'myQ' logo on its side, your opener likely has  
Two-Way Communication capability. HomeLink has the capability to establish Two-Way  
Communication with your garage door opener. HomeLink can receive and display  
“closing” or “opening” status messages from compatible garage door openers. At any  
time, Home-Link can also recall and display the last recorded status communicated by  
the garage door opener to indicate your garage door being “closed” or “opened”.  
To check if your garage door opener is compatible with this feature, refer to  
www.homelink.com/compatible/Two-way-Communication. If your garage door opener  
has this functionality, AND the Two-Way Communication indicators (4), (6) in the mirror  
appear while the garage door is opening/closing, then no further steps are needed.  
Two-Way Communication Programming is already complete. However, if your garage  
door opener has this functionality, AND the Two-Way Communication indicators (4), (6)  
in the mirror DO NOT appear while the garage door is opening/closing, use the following  
instructions to enable this functionality.  
Convenience Features 187  
1
In your vehicle, press and hold the programmed HomeLink button for 2 seconds, then  
release. Confirm that the garage door is moving. AFTER it stops, you will have one  
minute to complete the following steps:  
• A ladder and/or second person may simplify the following steps.  
2 On your garage door opener in your garage, locate the 'Learn' button (usually near  
where the hanging antenna wire is attached to the garage door opener). If there is  
difficulty locating this button, reference the device's owner's manual.  
3 Press and release the 'Learn' button.  
4 A light on your garage door opener may flash, and your Two-Way Communication  
indicators (4), (6) in your vehicle may flash, confirming completion of the process.  
5 Return to the vehicle and firmly press and release the programmed HomeLink button  
to activate your garage door. The Two-Way Communication indicators (4), (6) flash  
in orange when the door is moving. Do not make any additional button presses until  
AFTER the garage door has come to a complete stop.  
6 Your Two-Way Communication programming is now complete.  
Information  
If your garage door opener has Two-Way Communication functionality, it is possible for  
HomeLink to stop functioning the garage door shortly after initial programming, IF the  
Two-Way Communication Programming wasn't properly completed. This usually happens  
after the first 10 times a programmed HomeLink button is pressed. If you experience this,  
completing the “Programming a New HomeLink Button” and “Two-Way Communication  
Programming” will restore door operation.  
4) Canadian Programming  
Canadian radio-frequency laws require transmitter remote signals to “time-out” (or quit)  
after a couple seconds of transmission, which may not be long enough for HomeLink to  
pick up the signal during programming.  
If you live in Canada or you are having difficulties programming a gate operator or  
garage door opener by using the programming procedures, replace “Programming a New  
HomeLink Button” step 3 with the following:  
While the HomeLink indicator light (7) is flashing orange, press and release (“cycle”)  
your device's handheld remote every two seconds until the HomeLink indicator light (7)  
changes from orange to green. You may now release the handheld remote button. Then  
proceed with “Programming a New HomeLink Button” step 4.  
188 Convenience Features  
2. Operating HomeLink®  
1) Operating HomeLink®  
2C_ECMHomelink_3  
1
Press and release the desired programmed HomeLink button (1, 2 or 3).  
Information  
The HomeLink indicator (7) should light green, solid or flashing, and your programmed  
device should operate.  
If your device does not operate, the HomeLink programming was not successful, and  
you'll need to reprogram the button.  
2) Two-Way Communication Display Behavior  
2C_ECMHomelink_6  
Convenience Features 189  
1
Press and release one of the programmed HomeLink buttons (1, 2 or 3).  
2C_ECMHomelink_7  
2 The indicator (4) and (6) operates as below, if your garage door opener has Two-Way  
Communication functionality.  
• If the indicator (4) flashes in Orange, it indicates that the garage door is “Closing”.  
• The indicator (4) turns solid green once the garage door has closed.  
• If the indicator (6) flashes in Orange, it indicates that the garage door is “Opening”.  
• The indicator (6) turns solid green once the garage door has fully opened.  
• If the indicator (4) or (6) does not turn to green, it indicates that the last status of  
garage door was not received properly. The HomeLink mirror tries to receive the last  
known status of the garage door for a few seconds.  
3) Recalling Garage Door Status  
HomeLink mirror with Two-Way Communication provides a way to view the last stored  
message from the garage door opener. In order to recall the last known status of the last  
activated device, press the buttons “1 and 2” or “2 and 3” simultaneously.  
• If the indicator (4) appears solid Green, it indicates that the last activated device was  
“closed” properly.  
• If the indicator (6) appears solid Green, it indicates that the last activated device was  
“open” properly.  
3. Erasing HomeLink® Buttons  
1) Erasing and Reprogramming a Single HomeLink® Button:  
1
Press and hold the desired HomeLink button you want to re-program. DO NOT release  
the button.  
2 The HomeLink indicator light (7) will illuminate solid green. Release the button as soon  
as the HomeLink indicator light (7) begins to flash orange, usually about 20 seconds.  
3 Proceed with the steps in the “Programming a New HomeLink Button” section.  
Information  
If you do not complete the re-programming of a new device to the button, it will revert to  
the previously stored programming.  
190 Convenience Features  
2) The following instructions will erase ALL HomeLink® programming from ALL buttons:  
2C_ECMHomelinkDelete  
1
Press and hold the buttons (1) and (3) simultaneously  
2 The HomeLink indicator light (7) will illuminate solid Orange for about 10 seconds  
3 Release the buttons once the HomeLink indicator light (7) changes to Green and  
flashes rapidly  
4 Now all three HomeLink buttons (1), (2) and (3) are cleared of any programming  
Information  
HomeLink® and the HomeLink® House logo are registered trademarks of Gentex  
Corporation.  
The myQ logo is a registered trademark of The Chamberlain Group, Inc.  
FCC (USA) and ISED (Canada)  
This device complies with FCC rules part 15 and Innovation, Science, and Economic  
Development Canada RSS-210. Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) This device must accept  
any interference that may be received including interference that may cause undesired  
operation. WARNING: The transmitter has been tested and complies with FCC and ISED  
rules. Changes or modifications not expressly approved by the party responsible for  
compliance could void the user's authority to operate the device.  
This equipment complies with FCC and ISED radiation exposure limits set forth for an  
uncontrolled environment. End Users must follow the specific operating instructions for  
satisfying RF exposure compliance. This transmitter must be at least 20cm from the  
user and must not be co-located or operating in conjunction with any other antenna or  
transmitter.  
FCC (Htats-Unis) et ISED (Canada)  
Cet appareil est conforme aux reglements de la FCC, section 15, et au CNR-210  
d'Innovation, Sciences et Dhveloppement economique Canada. Le fonctionnement est  
assujetti aux deux conditions suivantes: (1) cet appareil ne doit pas causer d'interferences  
nuisibles et (2) cet appareil doit accepter toute interference recue, y compris celle qui  
pourrait entrainer un dysfonctionnement. MISE EN GARDE: L'emetteur a subi des tests  
et est conforme aux reglements de la FCC et d'ISDE. Les changements ou modifications  
non approuves explicitement par la partie responsable de la conformite pourraient rendre  
caduque l'autorisation de l'utilisateur de se servir du dispositif.  
Convenience Features 191  
Cet appareil est conforme aux limites d'exposition aux radiations de la FCC et d'ISDE  
etablies pour un environnement non controle. Les utilisateurs finaux doivent respecter  
les instructions d'utilisation specifiques pour satisfaire aux exigences de conformite aux  
expositions de RF. L'emetteur doit se trouver a 20 cm au minimum de l'utilisateur et ne  
doit pas etre situe au meme endroit que tout autre emetteur ou antenne ni fonctionner  
avec un autre emetteur ou antenne.  
Mejico  
La operacion de este equipo esta sujeta a las siguientes dos condiciones: (1) es posible  
que este equipo o dispositivo pueda no causar interferencia danina, y (2) este dispositivo  
o dispositivos deben aceptar cualquier interferencia, que incluye la interferencia que  
puede causar su operacion no deseada.  
HomeLink 5 Programing Flow Chart  
1C_ECMHomelinkFlowChart  
192 Convenience Features  
Side view mirrors  
2C_SideViewMirror  
Your vehicle is equipped with both left-hand and right-hand side view mirrors. The mirrors  
can be adjusted with the mirror adjustment control switch. Adjust the side view mirrors to  
your desired position before driving. The side view mirrors can be folded to help prevent  
damage when going through an automatic car wash or when passing through a narrow  
street.  
WARNING  
The right side view mirror is convex. Objects seen in the mirror are closer than they  
appear.  
Use the inside rearview mirror or turn your head and look to determine the actual  
distance of other vehicles prior to changing lanes.  
WARNING  
Do not adjust or fold the side view mirrors while driving. This may cause loss of vehicle  
control resulting in a collision.  
NOTICE  
• Do not scrape ice off the mirror face. This may damage the surface of the glass.  
• If the mirror is jammed with ice, do not adjust the mirror by force. Use an approved  
de-icer (not radiator antifreeze) spray, or a sponge or soft cloth with very warm water,  
or move the vehicle to a warm place and allow the ice to melt.  
• Do not clean the mirror with harsh abrasives, fuel, or other petroleum based cleaning  
products.  
Convenience Features 193  
Adjusting the side view mirrors  
2C_AdjustSideViewMirror  
Adjusting the side view mirrors  
1
Press the switch (1) to the L (left side) or R (right side) to select the side view mirror you  
want to adjust.  
2 Use the mirror adjustment control switch (2) to position the selected mirror up, down,  
left, or right.  
3 After adjustment, press the switch (1) to the middle to prevent unintended adjustment.  
NOTICE  
• The mirrors stop moving when they reach the maximum adjusting angles, but the  
motor continues to operate while the switch is pressed. Do not press the switch longer  
than necessary, because this can damage the motor.  
• Do not adjust the side view mirrors by force to prevent damage to the motor.  
Folding the side view mirrors  
2C_SideViewMirrorFolding  
To fold the side view mirror, grasp the housing of the mirror and then fold it toward the  
rear of the vehicle.  
194 Convenience Features  
Reverse parking aid  
if equipped  
2C_AutoAdjustSideViewMirrorWhenParking  
When the gear is shifted to the R (Reverse) position, the side view mirrors rotate  
downwards to aid with driving in reverse.  
The state of the side view mirror switch (1) determines whether or not the mirrors move.  
How it works  
• Left/Right: When the switch is pressed to L or R, both side view mirrors move.  
• Neutral: When both L or R is not pressed, the side view mirrors does not move.  
The side view mirrors automatically revert to their original positions if any of the following  
occur:  
• The Engine Start/Stop button is pressed to either the OFF position or the ACC position.  
• The gear is shifted to any position except R (Reverse).  
• The side view mirror adjustment button is not selected.  
Reverse parking aid user settings mode  
You may change the angle of the side view mirror if it is difficult to see the rear view with  
the basic downward mirror angle provided when reversing.  
When the vehicle is first delivered, the set downward angle of the left and right side view  
mirror are different to ensure driver visibility.  
1
Make sure the vehicle is stopped.  
2 Depress the brake pedal and shift the gear to R (Reverse). When L or R switch is  
pressed, both side view mirrors move downward to the basic set position.  
3 Press the L or R switch to select the side view mirror you want to adjust. Then press  
“
,
,
,
” switch to adjust the side view mirror to the desired angle.  
4 After adjusting the angle to save the adjusted side view mirror angle, shift the gear to  
another position other than R (Reverse), or change the L and R switch to the neutral  
position (L and R switch is not pressed).  
5 Set the other side view mirror following the above procedure 1 to 4.  
Convenience Features 195  
Resetting reverse parking aid user settings mode  
To change the side view mirror angle back to the basic angle, shift the gear to R (Reverse),  
and adjust the mirror angle higher than when the gear is in P (Park), N (Neutral) and D  
(Drive).  
NOTICE  
When changing the angle of both side view mirrors, it is recommended to change the  
angle one side at a time following the procedure 1 to 4.  
196 Convenience Features  
Windows  
Front / Rear  
1C_WindowOpenClose  
1. Driver's door power window switch  
2. Front passenger's door power window switch  
3. Rear door (left) power window switch  
4. Rear door (right) power window switch  
5. Window opening and closing  
6. Automatic power window  
7. Power window lock switch / Electronic child safety lock  
Power windows  
The Engine Start/Stop button must be in the ON position to be able to raise or lower  
the windows. Each door has a power window switch to control the door's window. The  
driver has a Power Window Lock button that can block the operation of rear passenger  
windows. The power windows operate for about 3 minutes after the Engine Start/Stop  
button is in the ACC or OFF position. If the front doors are opened, the battery power is  
turned OFF and the Power Windows do not operate.  
Convenience Features 197  
Window opening and closing  
2C_WindowAutoReverse  
To open:  
Press the window switch down to the first detent position (5). Release the switch when  
you want the window to stop.  
To close:  
Pull the window switch up to the first detent position (5). Release the window switch  
when you want the window to stop.  
Auto up/down window  
if equipped  
Pressing the power window switch momentarily to the second detent position (6)  
completely lowers or lifts the window even when the switch is released. To stop the  
window at the desired position while the window is operating, pull up or press down and  
release the switch.  
WARNING  
• Do not leave the vehicle running and the key in your vehicle with unsupervised  
children. Unattended children could operate the window, which could result in serious  
injury.  
• Do not extend your head, arms or any other body parts or objects outside the window  
while driving to avoid serious injury.  
Resetting the power windows  
If the power windows do not operate normally, the automatic power window system must  
be reset as follows:  
1
Press the Engine Start/Stop button to the ON position.  
2 Close the window and continue pulling up on the power window switch for at least one  
second.  
If the power windows do not operate properly after resetting, contact an authorized  
HYUNDAI dealer.  
198 Convenience Features  
WARNING  
Make sure body parts or other objects are out of the way before closing the windows. The  
automatic reverse feature does not operate while resetting the power window system.  
Automatic reversal  
if equipped  
2C_WindowEmergencyStop  
If a window senses any obstacle while it is closing automatically, it stops and lowers about  
12 inches (30 cm) to allow the object to be cleared.  
If the window detects any resistance while the power window switch is pulled up  
continuously, the window stops upward movement and then lowers about 1 inch (2.5  
cm).  
If the power window switch is pulled up continuously again within 5 seconds after the  
window is lowered by the automatic window reverse feature, the automatic window  
reverse does not operate.  
Information  
The automatic reverse feature is active only when the “Auto Up” feature is used by fully  
pulling up the switch to the second detent.  
NOTICE  
Do not install any accessories on the windows. The automatic reverse feature may not  
operate.  
WARNING  
Make sure body parts or other objects are safely out of the way before closing the  
windows to avoid injuries or vehicle damage.  
Objects less than 0.16 inches (4 mm) in diameter caught between the window glass and  
the upper window channel may not be detected by the automatic reverse window and  
the window does not stop and reverse direction.  
Convenience Features 199  
Power window lock button  
2C_WindowLockButton  
The driver can disable the power window switches on the rear passenger doors by  
pressing the power window lock button.  
When the power window lock button is pressed:  
• The driver's master control can operate all the power windows.  
• The front passenger's control can operate the front passenger's power window.  
• The rear passenger's control cannot operate the rear passengers' power window.  
WARNING  
Do not allow children to play with the power windows. Keep the driver's door power  
window lock button in the LOCK position. Serious injury or death may result from  
unintentional window operation by a child.  
NOTICE  
• To prevent possible damage to the power window system, do not open or close two  
windows or more at the same time. This also ensures the longevity of the fuse.  
• Never try to operate the main switch on the driver's door and the individual door  
window switch in opposite directions at the same time. If this is done, the window  
stops and cannot be opened or closed.  
200 Convenience Features  
Remote window opening feature  
if equipped  
2C_RemoteWindowOpenButton  
Press and hold the Door Unlock (1) button on the smart key for more than 3 seconds and  
the windows move down after the doors are unlocked. Window movement stops when  
you release the door unlock button.  
Information  
• The remote window opening feature operates only with the Safety Power Windows  
equipped.  
• The remote window opening feature may abruptly stop when you move away from  
your vehicle during operation. Stay in close proximity from your vehicle, while  
monitoring the window movement.  
• The doors unlock when the windows are opened using the remote window open  
feature.  
NOTICE  
Do not leave the windows down when leaving the vehicle to prevent theft or damage  
from water entering the vehicle.  
Convenience Features 201  
Wide Sunroof  
if equipped  
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the  
sunroof switch located on the overhead console.  
2C_WideSunroofuttonOverview  
The sunroof can only be operated when the Engine Start/Stop button is in the ON or  
START position.  
The sunroof can be operated for about 3 minutes after the Engine Start/Stop button is in  
the ACC or OFF position. If the front door is open, the sunroof cannot be operated even  
within the 3 minute period.  
WARNING  
To prevent serious injury or death:  
• Adjust the sunroof or sunshade when your vehicle is stopped.  
• Do not leave the engine running and the key in your vehicle with unsupervised children.  
Unattended children could operate the sunroof.  
• Do not sit on the top of the vehicle.  
NOTICE  
Do not operate the sunroof if it contacts any roof rack or cargo.  
Power sunshade  
2C_WideSunroofSunblindOpen  
202 Convenience Features  
Use the power sunshade to block direct sunlight coming through the sunroof glass.  
• Push the sunroof switch rearward to the first detent position, the power sunshade  
automatically slides open.  
• Push the sunroof switch forward to the first detent position, the power sunshade  
automatically closes. If the sunroof glass is open, the glass closes and then the  
sunshade closes.  
To stop the power sunshade at any point, push the sunroof switch in any direction.  
NOTICE  
Do not pull or push the power sunshade by hand to prevent damage.  
Information  
Wrinkles formed on the power sunshade are normal due to material characteristic.  
Tilt open/close  
2C_WideSunroofTiltOpen  
• Push the sunroof switch up and sunroof glass tilts open. If the power sunshade is  
closed, the sunshade opens first and then the sunroof tilts.  
• Push the sunroof switch up or forward when the sunroof glass is tilt opened. The  
sunroof glass automatically closes.  
To stop the sunroof movement at any point, push the sunroof switch in any direction.  
Slide open/close  
2C_WideSunroofSlideOpen  
Convenience Features 203  
• Push the sunroof switch rearward to the first detent position. The sunroof glass opens.  
If the power sunshade is closed, the power sunshade opens first and then the sunroof  
glass opens.  
Push the sunroof switch forward to the first detent position. The sunroof glass closes. If  
the sunroof glass is closed, the power sunshade closes.  
• Push the sunroof switch forward or rearward to the second detent position. The power  
sunshade and sunroof glass operate automatically (auto slide feature). To stop the  
sunroof movement at any point, push the sunroof switch in any direction.  
Automatic reversal  
2C_WideSunroofAutoReverse  
If the power sunshade or sunroof glass senses any obstruction while closing, it reverses  
direction then stops.  
The automatic reverse function may not work if a thin or soft object is caught between  
the power sunshade or sliding sunroof glass and sunroof sash.  
WARNING  
• Make sure that heads, hands, arms or any other body parts or objects are out of  
the way before operating the sunroof. Body parts or objects may get caught causing  
injuries or vehicle damage.  
• Never deliberately use your body parts to test the automatic reverse feature.  
NOTICE  
• Do not continue to push the sunroof switch after the sunroof is fully opened, closed,  
or tilted. Damage to the sunroof motor may occur or may cause the sunroof system to  
malfunction.  
• Using the sunroof for a long time may make noise caused by dust accumulated  
between the sunroof and vehicle body. Open the sunroof and remove dust regularly  
using a clean cloth.  
• Do not try to open the sunroof when the temperature is below freezing or when the  
sunroof is covered with snow or ice. Otherwise, the motor may be damaged. In a cold  
and wet weather, the sunroof may not work properly.  
• Do not open or drive with the sunroof glass open immediately after rain or washing the  
vehicle. Water may wet the interior of the vehicle.  
• Do not extend any cargo outside the sunroof while driving.  
204 Convenience Features  
WARNING  
Do not extend your head, arms, body parts, or objects outside the sunroof while driving.  
Injuries may occur if the vehicle suddenly stops.  
Resetting the sunroof  
2C_WideSunroofInitialize  
In some circumstances resetting the sunroof operation may need to be performed. Some  
instances where resetting the sunroof may be required include:  
• When the 12 V battery is either disconnected or discharged  
• When the sunroof fuse is replaced  
• If the sunroof one-touch AUTO OPEN/CLOSE operation is not functioning properly  
To reset the sunroof:  
1
Start the vehicle in P (Park).  
2 Make sure the power sunshade and sunroof glass are in the fully closed position.  
3 Release the switch when the power sunshade and sunroof glass is fully closed.  
4 Push the switch forward until the power sunshade and sunroof glass moves slightly.  
Then release the switch.  
5 Push and hold the sunroof switch forward again until the power sunshade and sunroof  
glass slide open and close.  
Do not release the switch until the operation is completed. If you release the switch,  
start again from step 2.  
Information  
If the sunroof is not reset after the vehicle battery is disconnected or discharged, or the  
sunroof fuse is blown, the sunroof may not operate normally.  
Convenience Features 205  
Sunroof open warning  
2C_SunroofOpenWarning  
If the driver turns off the engine when the sunroof is not fully closed, the warning chime  
sounds for several seconds and the sunroof open warning appears on the cluster display.  
Close the sunroof securely when leaving your vehicle.  
NOTICE  
Do not leave sunroof open when leaving the vehicle to prevent theft or damage from  
water entering the vehicle.  
206 Convenience Features  
Hood  
Opening the hood  
2C_HoodOpenKnob  
1
Park the vehicle and apply the parking brake.  
2 Pull the hood release lever to unlatch the hood. The hood pops open slightly.  
2C_HoodOpen  
3 Go to the front of the vehicle, raise the hood slightly, push to the left the secondary  
hood release lever (1) inside of the hood center and lift the hood (2).  
After the hood has been lifted halfway, it will raise completely by itself.  
Closing the hood  
1
Before closing the hood, check in and around the engine compartment to ensure the  
following:  
• Any tools or other loose objects have been removed.  
• All gloves, rags, or other combustible material have been removed.  
• All filler caps are tightly and correctly installed.  
2 Lower the hood until it is about 12 inches (30 cm) above the closed position and then  
let it drop.  
3 Check the hood has locked properly. If the hood is raised slightly, open it again and  
drop it from a little higher. Check again.  
Convenience Features 207  
WARNING  
• Before closing the hood, ensure all obstructions are removed from around the hood  
opening.  
• Always double check to make sure that the hood is firmly latched before driving away.  
Check there is no hood open warning light or message displayed on the instrument  
cluster. Driving with the hood open may cause a total loss of visibility, resulting in a  
collision.  
• Do not move the vehicle with the hood raised. It may block your vision and may result  
in a collision.  
208 Convenience Features  
Liftgate  
Opening the liftgate  
Opening from outside  
2C_OutsidePowerTailgateOpenButton  
Make sure the vehicle is in P (Park) and apply the parking brake.  
To open do one of the following:  
• Unlock all doors with the Door Unlock button on your smart key. Press the liftgate open  
button and open the liftgate.  
• With the smart key in your possession, press the liftgate open button and open the  
liftgate.  
Closing the liftgate  
Lower the liftgate lid and press down until it locks. Always check it is secure by pulling on  
the handle.  
WARNING  
Always keep the liftgate completely closed while the vehicle is moving. If it is left open  
or ajar, poisonous exhaust gases containing carbon monoxide (CO) may enter the vehicle  
and serious injury or death may result.  
Convenience Features 209  
WARNING  
Always close the liftgate before driving. Do not grab or hold on to the liftgate support  
struts or they may be damaged. Deformation of the liftgate support struts may result in  
vehicle damage and personal injury.  
WARNING  
Never allow anyone to occupy the cargo area of the vehicle at any time. If the liftgate  
is partially or totally latched and the person cannot get out, serious injury or death  
may occur due to lack of ventilation, exhaust fumes, and rapid heat build-up, or due to  
exposure to cold weather conditions. The cargo area is also a very dangerous location in  
the event of a collision because it is part of the vehicle's crush zone.  
Emergency liftgate safety release  
2C_EmergencyPowerTailgateOpen  
To unlock and open the liftgate manually from inside the cargo area, perform the  
following:  
1
Insert a long, flat object, such as a key into the opening at the bottom of the liftgate.  
2 Slide the latch in the direction of the arrow to unlock the liftgate.  
3 Push the liftgate open.  
210 Convenience Features  
WARNING  
• Never allow anyone to occupy the cargo area of the vehicle at any time. The cargo area  
is a very dangerous location in the event of a collision because it is part of the vehicle's  
crush zone.  
• Use the release lever for emergencies only.  
Convenience Features 211  
Power Liftgate  
if equipped  
Power liftgate operating conditions  
The power liftgate operates when the gear is in P (Park) with the Engine Start/Stop button  
is in the ON position. The liftgate operates regardless of the gear position when the  
engine is off.  
WARNING  
• Never leave children or animals unattended in your vehicle. Children may operate the  
power liftgate that could result in serious injury or property damage.  
• Make sure that there are no people or objects in the path of the power liftgate or smart  
liftgate before use. Serious injury, damage to the vehicle or damage to surrounding  
objects (for example, walls, ceilings, vehicles, etc.) may result if contact with the  
liftgate occurs.  
2C_TailgateSpace  
212 Convenience Features  
NOTICE  
• Do not close or open the power liftgate manually. This may cause damage to the power  
liftgate. If it is necessary to close or open the power liftgate manually when the battery  
is discharged or disconnected, do not apply excessive force.  
• Do not operate the power liftgate more than 10 times continuously when the engine is  
not running. Use the power liftgate with the engine running when the power liftgate is  
used repeatedly to prevent battery discharge.  
• Do not leave the liftgate open for a long period of time. This may drain the battery.  
• The power liftgate may not operate if the liftgate is left open for a long time. If it does  
not work, close it manually to the end at a slow pace.  
• Do not apply excessive force when the power liftgate is operating. Doing so could  
result in vehicle damage.  
• Always close the liftgate before driving. Do not grab or hold on to the liftgate support  
struts or they may be damaged. Deformation of the liftgate support struts may result in  
vehicle damage and personal injury.  
2C_GasLift  
• Do not modify or repair any part of the power liftgate by yourself. Contact an  
authorized HYUNDAI dealer.  
• Do not operate the power liftgate under the following conditions. The power liftgate  
may not operate properly.  
- One side of the vehicle is lifted to inspect the vehicle or change a tire.  
- Parking on an uneven road such as a slope, etc.  
• Close the liftgate completely and lock all doors and liftgate using the central door lock  
button before using an automatic car wash.  
• Do not spray high pressure water directly on the power liftgate outside open/close  
button. The liftgate may open unintentionally.  
Convenience Features 213  
Information  
• In cold and wet climates, the outside power liftgate open button may not work properly  
due to freezing conditions. If this occurs, remove the ice before using the outside  
power liftgate open/close button or use the power liftgate open/close button on the  
Smart key or the instrument panel.  
• If you leave the smart key in the liftgate and close the liftgate, a warning sounds for a  
few seconds. If this occurs, open the liftgate by pressing the power liftgate open button  
on the outside of the liftgate.  
• If there are obstacles such as snow on the liftgate, the liftgate may not open  
automatically. After removing the obstacle, try to open it again.  
• Be careful where there is an incline, as the liftgate lid may drop slightly when it is  
stopped before it fully opens.  
Operating the power liftgate  
Power liftgate open/close button (Smart key)  
2C_SmartKeytailgateOpenButton  
When the liftgate is closed, press the power liftgate open/close button for 1 second. The  
liftgate opens with a warning sound.  
While the liftgate is opening, press the button to stop power liftgate operation.  
When the liftgate is opened, press and hold the power liftgate open/close button to close  
the liftgate. If you release the button while the liftgate is closing, power liftgate operation  
stops with a warning sound for 5 seconds.  
Also, if the Smart key is not within operation range from the vehicle, liftgate operation  
stops with a warning sound for 5 seconds.  
WARNING  
Make sure that there are no people or objects in the path of the tailgate before pressing  
the open/close button inside the power tailgate and the smart key. Otherwise, this may  
cause serious injury or damage to the vehicle or object.  
214 Convenience Features  
Power liftgate open/close button (Instrument panel)  
2C_CrashPadTrunkOpenButton  
When the liftgate is closed, press the power liftgate open/close button. The power liftgate  
opens with a warning sound.  
While the liftgate is opening, press the button to stop power liftgate operation.  
When the liftgate is opened, press and hold the liftgate open/close button to close  
the power liftgate. If you release the button while the liftgate is closing, power liftgate  
operation stops with a warning sound for 5 seconds.  
Power liftgate open/close button (Outside the power liftgate)  
2C_OutsidePowerTailgateOpenButton  
When the liftgate is closed, press the power liftgate open/close button to open the  
liftgate.  
If the vehicle is locked, press the power liftgate open/close button with the Smart key in  
your possession.  
If the liftgate is unlocked, the liftgate opens or closes with a warning sound when the  
power liftgate open/close button is pressed without carrying the Smart key.  
Convenience Features 215  
Power liftgate open/close button (Inside the power liftgate)  
2C_PowerTailgateTrimTailgateOpenButton  
Press the power liftgate open/close button. The liftgate opens or closes automatically.  
Automatic reversal  
During power liftgate operation if the power liftgate senses any obstacle, the liftgate  
stops or fully opens. The automatic reverse feature may not operate properly, or it may  
operate unexpectedly under the following circumstances:  
• The automatic reverse feature may not detect the resistance if the detected resistance  
is below a certain level, or if the liftgate is almost fully closed near the latched position.  
• The automatic reverse feature may operate if a strong impact is applied with no  
obstructions placed.  
WARNING  
Never deliberately place any object or use your body part to test the automatic reverse  
feature.  
Information  
The power liftgate may stop operating if the automatic reverse feature operates more  
than two times while attempting to open or close the liftgate. If this occurs, carefully  
open or close the liftgate manually, and then after 30 seconds try to operate the power  
liftgate automatically again.  
Setting the power liftgate  
To use each feature, you may select the opening speed or opening height from the  
Settings menu. Deselect the settings when you do not want to use the feature.  
Power liftgate opening speed  
To adjust the power liftgate opening speed, select Setup > Vehicle > Door > Power  
Liftgate Opening Speed in the infotainment system.  
Power liftgate opening height  
To adjust the power liftgate opening height, select Setup > Vehicle > Door > Power  
Liftgate Opening Height in the infotainment system.  
216 Convenience Features  
Information  
The infotainment system may change after software updates. For more information, refer  
to the manual provided in the infotainment system and the quick reference guide.  
User height setting  
1
Position the liftgate manually to the height you prefer.  
2 Press the power liftgate open/close button located inside the liftgate for more than 3  
seconds.  
If User height setting is selected for the power liftgate opening height, the power liftgate  
will automatically open to the height manually set by you.  
Information  
• If the power liftgate opening height has not been manually set, the power liftgate will  
fully open when User height setting from the infotainment system is selected.  
• If one of the height setting (Full open/Level 3/Level 2/Level 1) is selected from the  
Settings menu in the infotainment system, and then User height setting is selected, the  
liftgate opens to the height manually set by you.  
• The power liftgate opening speed and opening height settings change according to the  
linked User Profile. If the User Profile is changed, power liftgate opening speed and  
opening height settings change accordingly.  
Resetting the power liftgate  
To reset the power liftgate:  
1
With the vehicle turned off or on, put the gear in P (Park).  
2 Press the power liftgate open/close inner button and outer button simultaneously until  
a chime sounds.  
3 Slowly close the liftgate manually.  
4 Press the power liftgate open/close outer button. The liftgate opens with a chime  
sound.  
Wait until the liftgate fully opens to complete resetting. If the liftgate stops before it is  
fully open, resetting cannot be completed.  
Information  
• If the power liftgate is not reset after the vehicle battery is disconnected or discharged,  
or the power liftgate fuse is blown, the power liftgate may not operate normally.  
• If the power liftgate does not operate properly after the above procedure, have your  
vehicle inspected by an authorized HYUNDAI dealer.  
Convenience Features 217  
Emergency liftgate safety release  
2C_EmergencyPowerTailgateOpen  
To unlock and open the liftgate manually from inside the cargo area, perform the  
following:  
1
Insert a long, flat object, such as a key into the opening at the bottom of the liftgate.  
2 Slide the latch in the direction of the arrow to unlock the liftgate.  
3 Push the liftgate open.  
WARNING  
• Never allow anyone to occupy the liftgate of the vehicle at any time. The cargo area is  
a very dangerous location in the event of a collision because it is part of the vehicle's  
crush zone.  
• Use the release lever for emergencies only.  
218 Convenience Features  
Smart Liftgate  
2C_SmartTailGate  
On a vehicle equipped with a smart key, the liftgate can be opened with hands-free  
activation using the smart liftgate system.  
Using smart liftgate  
The hands-free smart liftgate system can be used when:  
• The smart liftgate option is enabled in the Settings menu in the infotainment system.  
• The smart liftgate is activated 15 seconds after all the doors are closed and locked.  
• The smart liftgate opens when the smart key is detected in the area behind the vehicle  
for 3 seconds.  
Information  
The smart liftgate does not operate when:  
• A door is not locked or closed.  
• The Smart key is detected within 15 seconds from when the doors were closed and  
locked.  
• The Smart key is detected within 15 seconds after the doors are closed and locked,  
and within 60 inches (1.5 m) from the front door handles. (for vehicles equipped with  
Welcome Mirror).  
• The Smart key is in the vehicle.  
1
Settings  
To use smart liftgate, it must be enabled from the Settings menu in the infotainment  
system. Select:  
• Setup > Vehicle > Door > Smart Liftgate  
Information  
The infotainment system may change after software updates. For more information,  
refer to the manual provided in the infotainment system and the quick reference guide.  
2 Detect and Alert  
Convenience Features 219  
The smart liftgate detecting area extends about 20-40 inches (50-100 cm) behind the  
vehicle. If you are positioned in the detecting area and are carrying the Smart key, the  
hazard warning lights blink and the chime sounds before opening.  
Information  
If you unintentionally enter the detecting area and the hazard warning lights and chime  
starts, move away from the vehicle with the Smart key. The liftgate remains closed.  
3 Automatic opening  
After the hazard warning lights blink and the chime sounds 6 times, the smart liftgate  
opens.  
Deactivating smart liftgate  
If you press any button on the Smart key during the Detect and Alert stage, the smart  
liftgate is deactivated.  
Using the Smart key:  
• If you press the door unlock button, the smart liftgate is deactivated temporarily. If you  
do not open any door for 30 seconds, the smart liftgate is activated again.  
• If you press the liftgate open button for more than 1 second, the liftgate opens.  
• The smart liftgate is still activated if you press the door lock button or liftgate open/  
close button as long as the smart liftgate is not in the Detect and Alert stage.  
Detecting area  
2C_SmartTrunkSensingRange  
• The smart liftgate detecting area extends about 20-40 inches (50-100 cm) behind the  
vehicle. If you are positioned in the detecting area and are carrying the Smart key, the  
hazard warning lights blinks and the chime sounds for about 3 seconds to alert you that  
the liftgate opens.  
• The alert stops once the Smart key is moved outside of the detecting area within the 3  
second period.  
220 Convenience Features  
Information  
• Smart liftgate may not operate properly if any of the following occur:  
- The Smart key is close to a radio transmitter such as a radio station or an airport  
which can interfere with normal operation of the transmitter.  
- The Smart key is near a mobile two way radio system or a mobile phone.  
- Another vehicle's Smart key is being operated close to your vehicle.  
- The temperature drops below zero degree.  
• Smart liftgate detecting area may change when:  
- The vehicle is parked on an incline or slope.  
- One side of the vehicle is raised or lowered relative to the opposite side.  
Convenience Features 221  
Fuel Filler Door  
Opening the fuel filler door  
1
Turn the engine off.  
2 Pull up the fuel filler door opener.  
2C_FuelInletDoor  
3 Pull the fuel filler door (1) outward to access the fuel tank cap.  
4 To remove the fuel tank cap (2), turn it counterclockwise. You may hear a hissing noise  
as the pressure inside the tank equalizes.  
2C_FuelInletDoorOpen  
5 Place the cap on the fuel filler door.  
Information  
If the fuel filler door does not open because ice has formed around it, tap lightly or push  
on the door to break the ice and release the door. Do not open the door. If necessary,  
spray around the door with an approved deicer fluid (do not use radiator antifreeze) or  
move the vehicle to a warm place and allow the ice to melt.  
Closing the fuel filler door  
1
To install the fuel tank cap, turn it clockwise until it “clicks” one time.  
2 Close the fuel filler door until it is latched securely.  
222 Convenience Features  
WARNING  
Automotive fuel is highly flammable and explosive. Failure to follow these guidelines may  
result in SERIOUS INJURY or DEATH:  
• Read and follow all warnings posted at the gas station.  
• Before refueling, note the location of the Emergency Fuel Shut-Off, if available, at the  
gas station.  
• Before touching the fuel nozzle, you should eliminate the potential build-up of static  
electricity by touching a metal part of the vehicle, a safe distance away from the fuel  
filler neck, nozzle, or other gas source, with your bare hand.  
• Do not use mobile phones while refueling. Electric current and/or electronic  
interference from cellular phones can potentially ignite fuel vapors and cause a fire.  
• Do not get back into a vehicle once you have begun refueling. You can generate  
a buildup of static electricity by touching, rubbing or sliding against any item or  
fabric capable of producing static electricity. Static electricity discharge can ignite  
fuel vapors causing a fire. If you must re-enter the vehicle, you should once again  
eliminate potentially dangerous static electricity discharge by touching a metal part of  
the vehicle, away from the fuel filler neck, nozzle or other fuel source, with your bare  
hand.  
• When using an approved portable fuel container, be sure to place the container on the  
ground prior to refueling. Static electricity discharge from the container can ignite fuel  
vapors causing a fire.  
Once refueling has begun, contact between your bare hand and the vehicle should be  
maintained until the filling is complete.  
• Use only approved portable plastic fuel containers designed to carry and store fuel.  
• When refueling, always shift the gear to the P (Park) position, apply the parking brake,  
and set the Engine Start/Stop button to the OFF position. Sparks produced by electrical  
components related to the engine can ignite fuel vapors causing a fire.  
• Do not use matches or a lighter and do not smoke or leave a lit cigarette in your vehicle  
while at a gas station, especially during refueling.  
• Do not over-fill or top-off your vehicle tank, which can cause fuel spillage.  
• If a fire breaks out during refueling, leave the vicinity of the vehicle, and immediately  
contact the manager of the gas station and then contact the local fire department.  
Follow any safety instructions they provide.  
• If pressurized fuel sprays out, it can cover your clothes or skin and thus subject you  
to the risk of fire and burns. Always remove the fuel cap carefully and slowly. If the  
cap is venting fuel or if you hear a hissing sound, wait until the condition stops before  
completely removing the cap.  
• Always check that the fuel cap is installed securely to prevent fuel spillage in the event  
of an accident.  
NOTICE  
• Do not spill fuel on the exterior surfaces. It may damage the paint.  
• If the fuel filler cap needs to be replaced, use only a genuine HYUNDAI cap or the  
equivalent or the fuel system or emission control system may malfunction.  
Convenience Features 223  
Vehicle System OTA Update  
The OTA (Over-the-Air) software update feature allows you to wirelessly update software  
to the latest version. Using this feature, you can keep your vehicle system up to date with  
the latest software.  
Downloading software  
The latest software can be downloaded automatically while driving. After the latest  
software has been successfully downloaded, you receives a notification on your phone  
or the vehicle screen that the software update is available.  
Approving software update  
2C_OTAUpdateApprove  
After the vehicle is turned off, the vehicle system allows you to start the update.  
• To start the update, press Update Now (1).  
• To postpone the update, press Later (2).  
Preparing software update  
If you press the Update Now button on the screen, the vehicle begins installing the  
update automatically. The following conditions must be satisfied:  
• The vehicle must be off.  
• The gear must be in P (Park).  
• The Electronic Parking Brake (EPB) must be applied.  
• The exterior lights must be turned off.  
• The hood must be closed.  
• The battery must be sufficient.  
• The systems to be updated must not be running.  
Information  
The battery and system status are automatically checked by the vehicle.  
224 Convenience Features  
2C_OTAUpdatePreparing  
• To update immediately, press Update Now.  
• To cancel the update, press Cancel Update.  
Updating software  
2C_OTAUpdate  
You can see the progress of the update on the screen.  
After the update is complete, you receives a notification on your phone or the vehicle  
screen that the software update is complete.  
Information  
The screen turns off automatically after 3 minutes to save the battery. If the screen turns  
off automatically, you can check the update progress by pressing the Engine Start/Stop  
button.  
Convenience Features 225  
Information  
• After the update starts, you can exit the vehicle.  
• The OTA software update feature is only available for HYUNDAI Connected Services  
users.  
• The update details may vary depending on the installed software version.  
• Check the notice for the OTA software update on the HYUNDAI brand web.  
• If the update fails, the update recovery will automatically proceed. If you want to  
retry the software update, even after a successful recovery, contact the HYUNDAI Call  
Center.  
• If the update or recovery fails, contact the HYUNDAI Call Center.  
• After the update is complete, it may provide new functions or improvements. For more  
information, see the “OTA Software Update” page on the HYUNDAI brand web or scan  
the QR code on the screen.  
NOTICE  
• Observe the following restrictions during the update.  
- You cannot use the vehicle during the update. Be sure to have enough time for the  
update, and safely park the vehicle before starting the update process.  
- You cannot use remote features, including remote start.  
- The Rear Occupant Alert feature may not work. Check if there are any occupant in  
the rear seat.  
• The update is automatically canceled if any vehicle conditions required for the update  
are changed before starting the update.  
• Once the update has started, you cannot cancel the update.  
• You cannot use the OTA software update feature if you modify or replace any vehicle  
software.  
• Do not open the hood or replace the battery in the vehicle during the update. The  
update may fail.  
• If a diagnostic tool of any kind is connected to the vehicle OBD (On-board Diagnostic)  
terminal, the vehicle cannot be updated. The vehicle can be updated by removing the  
diagnostic tool connected to the OBD terminal and then restarting the vehicle.  
• If the update is not complete successfully, contact the HYUNDAI Call Center.  
226 Convenience Features  
Exterior Lights  
Lighting control  
To operate the lights, turn the knob at the end of the control lever to one of the following  
positions:  
2C_LightSwitchOverview  
1. OFF  
2. AUTO light  
3. Parking light  
4. Headlight  
AUTO headlight  
2C_LightSwitchAutoPosition  
The parking light and headlight are turned ON or OFF automatically depending on the  
amount of daylight as measured by the ambient light sensor (1) in front of the instrument  
panel.  
Even with the AUTO headlight feature in operation, it is recommended to manually turn  
ON the headlights when driving at night or in a fog, driving in the rain, or when you enter  
dark areas, such as tunnels and parking facilities.  
Convenience Features 227  
NOTICE  
• Do not cover or spill anything on the sensor (1) located in front of the instrument panel.  
• Do not clean the sensor using a window cleaner, the cleanser may leave a light film  
which could interfere with sensor operation.  
• If your vehicle has window tint or other types of metallic coating on the front  
windshield, the AUTO headlight system may not work properly.  
Parking light (  
)
2C_TailLampOn  
The parking light, license plate light, and instrument panel lamp are turned ON.  
Headlight (  
)
2C_headlightOn  
The headlight, parking light, license plate light and instrument panel lamp are turned ON.  
Information  
The Engine Start/Stop button must be in the ON position to turn on the headlight.  
228 Convenience Features  
High Beam Operation  
2C_HighBeamOn  
To turn on the high beam headlight, push the lever away from you. The lever returns to its  
original position.  
The high beam indicator illuminates when the headlight high beams are switched on.  
To turn off the high beam headlight, pull the lever towards you. The low beams turn on.  
WARNING  
Do not use high beam when there are other vehicles approaching you. Using high beam  
could obstruct the other driver's vision.  
2C_HighBeamFlash  
To flash the high beam headlight, pull the lever towards you, then release the lever. The  
high beams remain ON as long as you hold the lever.  
Convenience Features 229  
Turn signals and lane change signals  
2C_TurnSignalSwitch  
To signal a turn, push down on the lever for a left turn or up for a right turn in position (A).  
If an indicator stays on and does not flash or if it flashes abnormally, one of the turn signal  
bulbs may be burned out and may require replacement. Contact an authorized HYUNDAI  
dealer.  
One touch turn signal  
To use One Touch Turn Signal, push the turn signal lever up or down to position (B) and  
then release it.  
The lane change signals blink 3, 5, or 7 times.  
You can enable the One Touch Turn Signal function or choose the number of blinking  
by selecting Setup > Vehicle > Lights > One Touch Turn Signal > 7 flashes/5 flashes/3  
flashes/Off in the infotainment system.  
Battery saver function  
To prevent the battery from being discharging, the system automatically turns off the  
parking light when the driver turns the vehicle off and opens the driver's door.  
With this feature, the parking lights turn off automatically if the driver parks on the side of  
road at night.  
To keep the lights on when the vehicle is turned off:  
• Turn the parking lights OFF and ON again using the headlight switch.  
Headlight delay function  
If the Engine Start/Stop button is in the ACC or OFF position with the headlights ON, the  
headlights (and/or parking lights) remain on for about 5 minutes.  
If the driver's door is opened and closed, the headlights are turned off after 15 seconds.  
Also, with the vehicle off if the driver's door is opened and closed, the headlights (and/or  
parking lights) are turned off after 15 seconds.  
The headlights (and/or parking lights) can be turned off by pressing the lock button on the  
smart key twice or turning the headlight switch to the OFF or AUTO position.  
You can enable the headlight delay function by selecting Setup > Vehicle > Lights >  
Headlight Delay in the infotainment system.  
230 Convenience Features  
Information  
If the driver exits the vehicle through another door besides the driver's door, the battery  
saver function does not operate and the headlight delay function does not turn OFF  
automatically.  
To avoid battery discharge, turn OFF the headlights manually from the headlight switch  
before exiting the vehicle.  
Information  
The infotainment system may change after software updates. For more information, refer  
to the manual provided in the infotainment system and the quick reference guide.  
Interior button lights  
The interior button lights turns on or off in the following conditions:  
• The interior button lights turn on for a while when the door is unlocked and opened  
after all doors were closed and locked.  
• The interior button lights always turns on when the vehicle is turned on.  
• The interior button lights turn on for a while when the vehicle is turned off. If the door is  
opened and closed or locked, the interior button lights turn off immediately.  
You can enable the interior button lights by selecting Setup > Vehicle > Lights > Interior  
Lights Always On in the infotainment system.  
Information  
The infotainment system may change after software updates. For more information, refer  
to the manual provided in the infotainment system and the quick reference guide.  
Daytime Running Light (DRL)  
The Daytime Running Lights (DRL) can make it easier for others to see the front of your  
vehicle during the day, especially after dawn and before sunset.  
The DRL system is ON when the headlight switch is in the OFF or the AUTO headlight  
position and the Electronic Parking Brake is released.  
The DRL system turns OFF when:  
• The headlights are on.  
• The parking brake is applied.  
• The engine is off.  
Convenience Features 231  
Welcome system  
if equipped  
2C_WelcomeSystem  
Welcome system helps keep the driver visible by turning on vehicle lights when the driver  
approaches the vehicle.  
Door handle light  
When all the doors (and liftgate) are closed and locked, the door handle light will turn on  
for about 15 seconds if:  
• Setup > Vehicle > Lights > Welcome Mirror/Light > On door unlock is selected in the  
infotainment system,  
- The door lock button is pressed on the smart key.  
- The button of the outside door handle is pressed while carrying the smart key.  
- You put your hand in the outside door handle while carrying the smart key.  
• The smart key is detected, and both Lights > Welcome Mirror/Light > On door unlock  
and Light > Welcome Mirror/Light > On driver approach are selected.  
You can activate or deactivate the Welcome Light function from the Settings in the  
infotainment system.  
Information  
The infotainment system may change after software updates. For more information, refer  
to the manual provided in the infotainment system and the quick reference guide.  
Headlight and parking light  
When the headlight switch is in the headlight, parking light or AUTO position and all the  
doors (and liftgate) are closed and locked, the parking lights and headlights come on for  
about 15 seconds when the door unlock button is pressed on the smart key.  
If you press the door lock or unlock button, the parking lights and headlights turn off  
immediately.  
Select Setup > Vehicle > Lights > Headlight Delay from the infotainment system to turn  
on this function.  
232 Convenience Features  
Interior light  
When the interior light switch is in the  
position and all doors (and liftgate) are closed  
and locked, the room lamps come on for 30 seconds when:  
• The door unlock button is pressed on the smart key.  
• The button of the outside door handle is pressed while carrying the smart key.  
• You put your hand in the outside door handle while carrying the smart key.  
If you press the door lock or unlock button on the smart key, the lights turn off  
immediately.  
Convenience Features 233  
High Beam Assist (HBA)  
2C_HBASwitch  
Hight Beam Assist automatically switches between high beam and low beam depending  
on the detected brightness from the lights of oncoming vehicles or vehicles in front.  
Detecting sensor  
2C_FrontViewCamera  
[A] Front view camera  
The front view camera is used as a detecting sensor to detect ambient light and  
brightness while driving.  
Refer to the picture above for the detailed location of the detecting sensor.  
NOTICE  
• Always keep the front view camera in good condition to maintain optimal performance  
of High Beam Assist.  
• For more information on the limitations of the front view camera, refer to the  
“Forward Collision-Avoidance Assist (FCA) (Front view camera only)” or "Forward  
Collision-Avoidance Assist (FCA) (Sensor fusion)" section in chapter 7.  
234 Convenience Features  
High Beam Assist settings  
2C_HBASetInfo  
With the Engine Start/Stop button in the ON position, select Setup > Vehicle > Lights >  
High Beam Assist from the Settings menu to turn on High Beam Assist and deselect to  
turn off the function.  
WARNING  
Only change the settings after parking your vehicle at a safe location.  
High Beam Assist operation  
• After selecting High Beam Assist from the Settings menu to operate High Beam Assist:  
- Place the headlight switch in the AUTO position and push the headlight lever towards  
the instrument cluster. The High Beam Assist ( ) indicator light illuminates.  
- When High Beam Assist is enabled, high beams turn on when the vehicle speed is  
above 18 mph (30 km/h) and the High Beam (  
) indicator illuminates. When the  
vehicle speed is below 12 mph (20 km), high beams turn off and the indicator light  
illuminates in white.  
• When High Beam Assist is operating:  
- If the turn signal lever is pulled toward you when the high beams are off, the high  
beams turn on. When you let go of the turn signal lever, High Beam Assist operates  
again.  
- If the turn signal lever is pulled toward you when the high beams are on by High  
Beam Assist, the low beams turn on and High Beam Assist turns off.  
- If the turn signal lever is pushed away from you, the high beams turn on and High  
Beam Assist turns off.  
- If the headlight switch is moved from AUTO to another position (headlight/position/  
off(O)), the corresponding light turns on and High Beam Assist turns off.  
• When High Beam Assist is operating, high beam switches to low beam if:  
- The headlights of an oncoming vehicle are detected.  
- The tail lights of a front vehicle are detected.  
- The headlight or tail light of a motorcycle or a bicycle is detected.  
- The surrounding ambient light is bright enough so high beams are not required.  
- Streetlights or other lights are detected.  
- The vehicle speed drops below the threshold.  
Convenience Features 235  
Information  
The images and colors in the cluster may differ depending on the cluster type or theme  
selected from the cluster.  
High Beam Assist malfunction and limitations  
High Beam Assist malfunction  
2C_DriverAssistanceMalfunction  
When High Beam Assist is not working properly, the "Check Driver Assistance system"  
warning message may appear, and the  
warning light may illuminate on the instrument  
cluster. Have the system inspected by an authorized HYUNDAI dealer.  
Limitations of High Beam Assist  
High Beam Assist may not work properly in the following situations if:  
• The headlights from an oncoming or front vehicle is damaged or out of the detection  
range.  
• The headlights from an oncoming or front vehicle are covered with dust, snow, or water.  
• An oncoming or front vehicle's headlights are off but the fog lights are on.  
• There are lights that have a similar shape as a vehicle's light ahead.  
• The headlights are not repaired or replaced properly.  
• The headlights are not aimed properly.  
• You are driving on a narrow curved road, rough road, uphill, or downhill.  
• A front vehicle is partially visible at a crossroad or on a curved road.  
• There is a temporary reflector or flash ahead (construction area).  
• There is a traffic light, reflecting sign, LED sign, or reflectors ahead.  
• The road is wet or covered with snow or ice.  
• A vehicle suddenly appears from a curve.  
• The vehicle is tilted due to a flat tire or being towed.  
• The headlights from an oncoming or front vehicle is not detected because of  
exhaust fumes, smoke, fog, snow, blizzard, water spray on the road, or windshield  
condensation, etc.  
236 Convenience Features  
Information  
For more information on the limitations of the front view camera, refer to the  
“Forward Collision-Avoidance Assist (FCA) (Front view camera only)” or "Forward  
Collision-Avoidance Assist (FCA) (Sensor fusion)" section in chapter 7.  
WARNING  
• Always check road conditions, and if necessary, take appropriate actions to drive safely.  
It is your responsibility to operate your vehicle in a safe manner.  
• If High Beam Assist does not operate properly, use the turn signal lever to switch  
between high beam and low beam.  
• High Beam Assist may not operate for 15 seconds right after your vehicle is started or  
when the front view camera is initialized.  
Convenience Features 237  
Interior Lights  
WARNING  
Do not use the interior lights when driving in the dark. The interior lights may obscure  
your view and result in a collision.  
Do not use the interior lights for extended periods when the vehicle is turned off.  
Otherwise, the battery discharges.  
Interior lamp Auto off  
The interior lights automatically go off about 20 minutes after the vehicle is turned off and  
the doors are closed. If a door is opened, the light go off 25 minutes after the vehicle is  
turned off. If the doors are locked by the smart key and the vehicle enters the armed stage  
of the theft alarm system, the lights go off 5 seconds later.  
Front lamps  
2C_MapLampButton  
• Press the lens to turn on or off the map lamp. This light produces a spot beam for  
convenient use as a map lamp at night or as a personal lamp for the driver and the front  
passenger.  
•
•
•
:Press the button to turn on the room lamp for the front and rear seats.  
:Press the button to turn off the room lamp for the front and rear seats.  
:The front or rear room lamps come on when the front or rear doors are opened.  
When doors are unlocked by the smart key, the front and rear lamps come on for about  
30 seconds as long as any door is not opened. The front and rear room lamps go out  
gradually after about 30 seconds when the door is closed. However, if the Engine Start/  
Stop button is in the ON position or all doors are locked, the front and rear lamps turn  
off. If a door is opened with the Engine Start/Stop button in the ACC or OFF position,  
the front and rear lamps stay on for about 5 minutes.  
238 Convenience Features  
Rear lamps  
Room lamp  
2C_RoomLamp  
:Press the button to turn on and off the rear room lamp.  
Vanity mirror lamp  
2C_SunvisorLamp  
Push the switch to turn the lamp on or off.  
•
•
: The lamp turns on if this button is pressed.  
: The lamp turns off if this button is pressed.  
Glove box lamp  
2C_GlobeBoxLamp  
Convenience Features 239  
The glove box lamp turns on when the glove box is opened.  
If the glove box is not closed, the lamp turns off after 20 minutes.  
NOTICE  
Close the glove box after use to prevent unnecessary battery discharge.  
Ambient light  
if equipped  
2C_MoodLamp  
[A] Driver seat door, passenger seat door  
[B] Passenger seat open tray  
To set the brightness and color of the ambient light, select Setup > Vehicle > Lights >  
Ambient Lighting in the infotainment system.  
• If the Link to Drive Mode is selected, the ambient light color changes according to the  
selected drive mode.  
• If you do not want to use ambient lighting, set Brightness to 0 in the infotainment  
system.  
Information  
• The infotainment system may change after software updates. For more information,  
refer to the manual provided in the infotainment system and the quick reference guide.  
• The color of the mood lamp may seem different under some conditions depending on  
the color of the interior and the set mood color.  
240 Convenience Features  
Cargo area lamp  
2C_LuggageRoomLamp  
The cargo area lamp turns on when the liftgate is opened and off when the liftgate is  
closed.  
NOTICE  
Close the liftgate after use to prevent unnecessary battery discharge.  
Convenience Features 241  
Wipers And Washers  
Front windshield wiper/washer  
2C_WiperSwitchOverview  
Rear windshield wiper/washer  
2C_WasherRearSwitchOverview  
A. Wiper speed control  
• HI: High wiper speed.  
• LO: Low wiper speed.  
• INT: Intermittent wipe.  
• AUTO(if equipped): Auto control wipe.  
• OFF: Off  
• MIST: Single wipe  
B. Intermittent or Auto control wipe time adjustment  
C. Wash with brief wipes (front)  
D. Rear wiper control  
• HI: High wiper speed.  
• LO: Low wiper speed.  
• OFF: Off  
E. Wash with brief wipes (rear)  
242 Convenience Features  
Front windshield wipers  
Operates as follows when the engine is turned on.  
• HI: The wiper runs at a higher speed.  
• LO: The wiper runs at a lower speed.  
• INT: Wiper operates intermittently at the same wiping intervals. To vary the speed  
setting, turn the speed control knob.  
• OFF: Wipers are not in operation.  
• MIST: For a single wiping cycle, push the lever downward and release. The wipers  
operate continuously if the lever is held in this position.  
Information  
If there is heavy accumulation of snow or ice on the windshield, defrost the windshield for  
about 10 minutes, or until the snow and/or ice is removed to prevent damage to the wiper  
and washer system.  
AUTO (Automatic) control  
if equipped  
2C_RainSensor  
The rain sensor located on the upper end of the windshield glass senses the amount of  
rainfall and controls the interval of the wiping cycle.  
To change the sensitivity setting, turn the sensitivity control knob.  
If the wiper switch is set in the AUTO mode when the Engine Start/Stop button is in the  
ON position, the wiper operates once to perform a self-check of the system. Set the wiper  
to the OFF position when the wiper is not used.  
WARNING  
To prevent personal injury:  
• Do not touch the upper end of the windshield glass facing the rain sensor.  
• Do not wipe the upper end of the windshield glass with a damp or wet cloth.  
• Do not put pressure on the windshield glass.  
Convenience Features 243  
NOTICE  
• When washing the vehicle, set the wiper switch in the OFF position to stop the auto  
wiper operation.  
• Do not remove the sensor cover located on the upper end of the passenger side  
windshield glass.  
Front windshield washers  
2C_WasherSwitch  
In the OFF position, pull the lever gently toward you to spray washer fluid on the  
windshield and to run the wipers 1-3 cycles. The spray and wiper operation continues  
until you release the lever. If the washer does not work, you may need to add washer fluid  
to the washer fluid reservoir.  
Recirculating air when washer fluid is used  
When washer fluid is used, in order to reduce any objectionable scent of the washer  
fluid from entering the cabin, recirculation mode and air conditioning are automatically  
activated depending on the outside temperature. If you select fresh mode while the  
function is operating, the function resumes after a certain amount of time. It may not  
work in some conditions such as cold weather or vehicle OFF.  
For more information, refer to the “Climate control additional features” section in this  
chapter.  
WARNING  
When the outside temperature is below freezing, always warm the windshield using the  
defroster to help prevent the washer fluid from freezing on the windshield and obscuring  
your vision that could lead to a collision resulting in serious injury or death.  
Always use appropriate washer fluids in the winter season or cold weather.  
244 Convenience Features  
NOTICE  
To prevent damage:  
• Do not operate the washer when the fluid reservoir is empty or when the windshield is  
dry.  
• Do not operate the wipers when the windshield is dry.  
• Do not attempt to move the wipers manually.  
• Use anti-freezing washer fluids in the winter season or cold weather.  
Rear windshield wipers and washers  
2C_WiperRearOperation  
The rear window wiper and washer switch is located at the end of the wiper and washer  
switch lever. Turn the switch to the desired position to operate the rear wiper and washer.  
• HI: High wiper speed  
• LO: Low wiper speed  
• OFF: Off  
Auto rear wiper  
2C_WasherRearSwitch  
Push the lever away from you to spray rear washer fluid and to run the rear wipers 1-3  
cycles. The spray and wiper operation continues until you release the lever.  
• The rear wiper operates while the vehicle is in reverse with the front wiper on. You can  
select the function from the Settings menu in the infotainment system. Select:  
• Setup > Vehicle > Convenience > Auto Rear Wiper (in R)  
Convenience Features 245  
For more information, refer to the “Recirculating air when washer fluid is used” section  
in chapter 5.  
246 Convenience Features  
Manual Climate Control System  
if equipped  
1C_Aircon_2  
1. Fan speed control  
2. Temperature control  
3. Mode selection  
4. Front windshield defroster  
5. A/C (air conditioning)  
6. Air intake control  
7. Rear window defroster  
Heating and air conditioning  
1
Start the engine.  
2 Set the mode to the desired position.  
To improve the effectiveness of heating and cooling, select:  
• Heating:  
• Cooling:  
3 Set the temperature control to the desired position.  
4 Set the air intake control to the outside (fresh) air position.  
5 Set the fan speed control to the desired speed.  
If air conditioning is desired, turn on the air conditioning system.  
Mode selection  
The mode selection knob controls the direction of the air flow through the ventilation  
system.  
Convenience Features 247  
Air flow direction  
1C_ManualAirconModeSelectionOverview  
Symbol  
Operation  
Direction  
Air flow is directed toward the upper body and face.  
Additionally, each outlet can be controlled to direct the air  
discharged from the outlet.  
B, D, F  
Air flow is directed toward the face and the floor.  
B, C, D, E, F  
A, C, D, E, F  
Most of the air flow is directed to the floor, with a small amount  
of the air being directed to the windshield and side window  
defrosters.  
Most of the air flow is directed to the floor and the windshield  
with a small amount directed to the side window defrosters.  
A, C, D, E, F  
A, D  
Most of the air flow is directed to the windshield with a small  
amount of air directed to the side window defrosters.  
248 Convenience Features  
MAX A/C  
2C_MaxAircon  
The MAX A/C mode is used to cool the inside of the vehicle faster. Air flow is directed  
toward the upper body and face.  
The air conditioning and recirculated air are both selected. Turn the fan speed mode to  
adjust.  
Instrument panel vents  
Front  
2C_FrontVent  
Rear  
2C_RearVent  
Convenience Features 249  
The instrument panel vent air flow can be directed up/down or left/right using the vent  
adjustment lever.  
Move the lever all the way to the  
the air vents.  
direction to close, and to the  
direction to open  
Temperature control  
2C_TempCont  
The temperature increases by turning the knob to the right. The temperature decreases  
by turning the knob to the left.  
Air intake control  
Recirculation mode  
WL_RecirculationModeLamp  
With the recirculated air selected, air from the passenger compartment is drawn through  
the climate control system.  
Outside (fresh) mode  
WL_RecirculationModeLamp_2  
With the outside (fresh) air selected, air enters the vehicle from outside and is drawn  
through the climate control system.  
250 Convenience Features  
Information  
Using the system in the fresh air position is recommended.  
Prolonged operation of the heater in the recirculated air position (without air conditioning  
selected) can cause fogging of the windshield and side windows and the air within the  
passenger compartment will become stale.  
In addition, prolonged use of the air conditioning with the recirculated air position  
selected will result in excessively dry air in the passenger compartment.  
WARNING  
To prevent serious injury or death:  
• Continued climate control system operation in the recirculated air position may allow  
humidity to increase inside the vehicle that could fog the windshield and the side  
windows and obscure visibility.  
• Do not sleep in a vehicle with the air conditioning or heating system on.  
• Continued climate use of recirculated air may cause drowsiness or sleepiness, and loss  
of vehicle control. Set the air intake control to the outside (fresh) air position while  
driving.  
Fan speed control  
2C_FanSpeedCont  
Turn the knob to the right to increase the fan speed and airflow. Turn the knob to the left  
to decrease fan speed and airflow.  
Setting the fan speed control knob to the “0” position turns off the fan.  
Information  
Operating the fan speed when the Engine Start/Stop button is in the ON position may  
cause the battery to discharge.  
Convenience Features 251  
Air conditioning (A/C)  
2C_ACOn  
Press the A/C button to turn on the air conditioning system (indicator light ON). Press the  
button again to turn off the air conditioning system.  
System operation  
Ventilation  
1
Set the mode to the  
position.  
2 Set the air intake control to the outside (fresh) mode.  
3 Set the temperature control to the desired position.  
4 Set the fan speed control to the desired speed.  
Heating  
1
Set the mode to the  
position.  
2 Set the air intake control to the outside (fresh) mode.  
3 Set the temperature control to the desired position.  
4 Set the fan speed control to the desired speed.  
5 If desired, turn the air conditioning ON with the temperature control knob set to heat in  
order to dehumidify the air before it enters into the cabin.  
If the windshield fogs up, set the mode to  
the or  
position.  
Operation tips  
• To help keep dust or unpleasant fumes from entering the vehicle through the  
ventilation system, temporarily set the air intake control to the recirculation mode.  
Be sure to return the control to the fresh air mode when the irritation has passed to  
keep fresh air in the vehicle. This can help keep the driver alert and comfortable.  
• To prevent interior fog on the windshield, set the air intake control to the fresh air  
position and the fan speed to the desired position, turn on the air conditioning system,  
and adjust the temperature control to the desired temperature.  
Air conditioning  
1
Start the engine. Press the air conditioning button.  
2 Set the mode to the position.  
3 Set the air intake control to the outside air or recirculated air position.  
252 Convenience Features  
4 Adjust the fan speed control and temperature control as desired.  
NOTICE  
• When using the air conditioning system, monitor the temperature gauge closely while  
driving up hills or in heavy traffic when outside temperatures are high. Continue to use  
the fan but turn off the air conditioning system if the temperature gauge indicates the  
engine is overheating.  
• Always use the air conditioning with the windows closed. In humid weather, if the  
windows are open and the air conditioning is running, water droplets may form inside  
the vehicle and potentially damage electrical equipment.  
Air conditioning system operation tips  
• If the vehicle has been parked in direct sunlight during hot weather, open the windows  
for a short time to let the hot air inside the vehicle escape.  
• After sufficient cooling has been achieved, switch back from the recirculated air  
position to the outside fresh air position.  
• To help reduce moisture inside of the windows on rainy or humid days, decrease the  
humidity inside the vehicle by operating the air conditioning system with the windows  
and sunroof closed. Control the temperature with the temperature control knob.  
• Use the air conditioning system every month for a few minutes to ensure maximum  
system performance.  
• If you operate the air conditioner excessively, the difference between the temperature  
of the outside air and that of the windshield may cause the outer surface of the  
windshield to fog up, causing loss of visibility. In this case, set the mode selection  
switch to the  
setting.  
position and set the fan speed control switch to the lowest speed  
System maintenance  
Cabin air filter  
The cabin air filter is installed behind the glove box. It filters the dust or other pollutants  
that enter the vehicle through the heating and air conditioning system.  
Have the cabin air filter replaced by an authorized HYUNDAI dealer according to the  
maintenance schedule. If the vehicle is being driven in severe conditions such as dusty or  
rough roads and/or if transporting pets or occupants smoke inside the vehicle, then more  
frequent cabin air filter inspections and changes are required.  
Information  
Replace the filter according to the Maintenance Schedule. If the vehicle is being driven  
in severe conditions such as dusty, rough roads, more frequent climate control air filter  
inspections and replacement are required.  
Checking the amount of air conditioner refrigerant  
If the amount of refrigerant is too low or too high, the performance of the air conditioning  
is reduced. Have your vehicle inspected by an authorized HYUNDAI dealer.  
Convenience Features 253  
NOTICE  
• The refrigerant system should only be serviced by trained and certified technicians in a  
well-ventilated area to ensure proper and safe operation.  
• Never repair the air conditioning evaporator (cooling coil) or replace with the one  
removed from a used or salvaged vehicle. A new replacement evaporator must be  
certified (and labeled) as meeting SAE Standard J2842.  
WARNING  
Vehicles equipped with R-1234yf  
WL_RefrigerantWarning  
To prevent serious injury, have the air conditioning system be serviced by only trained and  
certified technicians. R-1234yf is flammable and operated at high pressure.  
Reclaim all refrigerants with proper equipment. Venting refrigerants directly to the  
atmosphere is harmful to individuals and environment.  
Air conditioning refrigerant label  
2C_RefrigerantTypeLabel  
You can find out which air conditioning refrigerant is applied to your vehicle on the label  
located inside of the hood.  
254 Convenience Features  
2C_RefrigerantLabel  
Each symbol and specification on the air conditioning refrigerant label is represented as the following:  
1. Classification of refrigerant  
2. Amount of refrigerant  
3. Classification of compressor lubricant  
4. Caution  
5. Flammable refrigerant  
6. To require registered technician to service air conditioning system  
Convenience Features 255  
Automatic Climate Control System  
if equipped  
1C_DATCAircon  
The climate control system buttons may differ depending on vehicle specification.  
1. Driver's temperature control  
2. Passenger's temperature control  
3. AUTO (automatic control)  
4. SYNC  
5. Front windshield defroster  
6. A/C (air conditioning)  
7. OFF  
8. Fan speed control  
9. Mode selection  
10.Air intake control  
11. Rear window defroster  
Automatic heating and air conditioning  
The Automatic Climate Control System is controlled by setting the desired temperature.  
1
Press the AUTO button. The modes, fan speeds, air intake, and air conditioning are  
controlled automatically by the temperature setting.  
You can control the fan speed in three stages by pressing the AUTO button during  
automatic operation.  
• HIGH: Provides rapid air conditioning and heating with the maximum fan speed  
setting.  
• MEDIUM: Provides air conditioning and heating with the mid-level fan speed setting.  
• LOW: Fan speed is set to the lowest setting range.  
256 Convenience Features  
2C_AirconAutoButton  
2 Push up or down the temperature control switch to set the desired temperature. If  
the temperature is set to the lowest setting, the air conditioning system operates  
continuously. After the interior has cooled sufficiently, adjust the switch to a higher  
temperature set point whenever possible.  
2C_AirconTempButton  
To turn off the automatic operation, select any switch of the following:  
• Mode selection switch  
• Front windshield defroster button (Press the button one more time to deselect the  
front windshield defroster function. The 'AUTO' sign illuminates on the information  
display once again.)  
• Fan speed control switch  
• A/C button  
The selected function is controlled manually while other functions operate  
automatically.  
For your convenience and to improve the effectiveness of the climate control, use the  
AUTO button and set the temperature to 72 °F (22 °C).  
Convenience Features 257  
NOTICE  
2C_SolarRadiationSensor  
Never place anything near the sensor to ensure better control of the heating and cooling  
system.  
Manual heating and air conditioning  
1
Start the engine.  
2 Set the mode to the desired position. For improving the effectiveness of heating and  
cooling, select:  
• Heating:  
• Cooling:  
3 Set the temperature control to the desired position.  
4 Set the air intake control to the outside (fresh) air position.  
5 Set the fan speed control to the desired speed.  
6 If air conditioning is desired, turn on the air conditioning system.  
7
Press the AUTO button to convert to full automatic control of the system.  
Mode selection  
2C_AirconModeSelection  
The mode selection switch controls the direction of the air flow through the ventilation  
system.  
258 Convenience Features  
Air flow direction  
1C_AutoAirconModeSelectionOverview  
Symbol  
Operation  
Direction  
Air flow is directed toward the upper body and face.  
Additionally, each outlet can be controlled to direct the air  
discharged from the outlet.  
B, D, F  
Air flow is directed toward the face and the floor.  
B, C, D, E, F  
A, C, D, E, F  
Most of the air flow is directed to the floor, with a small amount  
of the air being directed to the windshield and side window  
defrosters.  
Most of the air flow is directed to the floor and the windshield  
with a small amount directed to the side window defrosters.  
A, C, D, E, F  
Convenience Features 259  
Front windshield defroster [A], [D]  
2C_AirconFrontDefrostButton  
Press the A/C button to manually turn on the system on (indicator light ON) and off.  
Press the front windshield defroster button (indicator light ON) to turn on the front  
windshield defroster. If the windshield defogging is set, outside (fresh) mode is  
automatically selected and the air conditioning turns on according to the detected  
ambient temperature  
Press the front windshield defroster button once more (indicator light OFF) to turn the  
function off. Each climate control setting reverts to the setting prior to selecting the front  
windshield defrost.  
Instrument panel vents  
Front  
2C_FrontVent  
260 Convenience Features  
Rear  
2C_RearVent  
The instrument panel vent air flow can be directed up/down or left/right using the vent  
adjustment lever.  
Move the lever all the way to the  
the air vents.  
direction to close, and to the  
direction to open  
Temperature control  
2C_AirconTempButton  
Push up the switch to increase the temperature. Push down to decrease the temperature.  
Temperature conversion (°C ↔ °F)  
To change the temperature unit from °C to °F or °F to °C:  
• Press the OFF button while pressing the AUTO button for more than 3 seconds.  
• SelectSetup > General > Units > Temperature Unit > °C/°F in the infotainment system.  
Convenience Features 261  
SYNC (Adjusting the driver and passenger side temperature equally)  
2C_AirconSYNCButton  
Adjusting the temperature and air flow direction equally  
Press the SYNC button (indicator light ON) to adjust the driver and passenger side  
temperature and air flow direction equally.  
Adjusting the temperature individually  
Press SYNC button (indicator light OFF) again to adjust the driver and passenger side  
temperature individually.  
Air intake control  
Recirculation mode  
WL_RecirculationModeLamp  
With the recirculated air selected, air from the passenger compartment is drawn through  
the climate control system.  
Outside (fresh) mode  
WL_AirconAirIntakeButton  
With the outside (fresh) air selected, air enters the vehicle from outside and is drawn  
through the climate control system.  
262 Convenience Features  
Information  
Using the system in the fresh air position is recommended.  
Prolonged operation of the heater in the recirculated air position (without air conditioning  
selected) can cause fogging of the windshield and side windows and the air within the  
passenger compartment will become stale.  
In addition, prolonged use of the air conditioning with the recirculated air position  
selected will result in excessively dry air in the passenger compartment.  
WARNING  
To prevent serious injury or death:  
• Continued climate control system operation in the recirculated air position may allow  
humidity to increase inside the vehicle that could fog the windshield and the side  
windows and obscure visibility.  
• Do not sleep in a vehicle with the air conditioning or heating system on.  
• Continued climate use of recirculated air may cause drowsiness or sleepiness, and loss  
of vehicle control. Set the air intake control to the outside (fresh) air position while  
driving.  
Fan speed control  
2C_Airconwind  
Push up the switch to increase fan speed and airflow. Push down the switch to decrease  
fan speed and airflow.  
Pressing the OFF button turns off the fan.  
Information  
Operating the fan speed when the Engine Start/Stop button is in the ON position may  
cause the battery to discharge.  
Convenience Features 263  
Air conditioning  
2C_AirconAirconButton  
Press the A/C button to manually turn on the system on (indicator light ON) and off.  
OFF mode  
2C_AirconAutoOffButton  
Press the OFF button to turn the climate control system off. You can still operate the  
mode and air intake buttons as long as the Engine Start/Stop button is in the ON position.  
System maintenance  
Cabin air filter  
The cabin air filter is installed behind the glove box. It filters the dust or other pollutants  
that enter the vehicle through the heating and air conditioning system.  
Have the cabin air filter replaced by an authorized HYUNDAI dealer according to the  
maintenance schedule. If the vehicle is being driven in severe conditions such as dusty or  
rough roads and/or if transporting pets or occupants smoke inside the vehicle, then more  
frequent cabin air filter inspections and changes are required.  
Information  
• Replace the filter according to the Maintenance Schedule. If the vehicle is being driven  
in severe conditions such as dusty, rough roads, more frequent climate control air filter  
inspections and changes are required.  
• When the air flow rate suddenly decreases, have your vehicle inspected by an  
authorized HYUNDAI dealer.  
264 Convenience Features  
Checking the amount of air conditioner refrigerant  
If the amount of refrigerant is too low or too high, the performance of the air conditioning  
is reduced. Have your vehicle inspected by an authorized HYUNDAI dealer.  
NOTICE  
• The refrigerant system should only be serviced by trained and certified technicians in a  
well-ventilated area to ensure proper and safe operation.  
• Never repair the air conditioning evaporator (cooling coil) or replace with the one  
removed from a used or salvaged vehicle. A new replacement evaporator must be  
certified (and labeled) as meeting SAE Standard J2842.  
WARNING  
Vehicles equipped with R-1234yf  
WL_RefrigerantWarning  
To prevent serious injury, have the air conditioning system be serviced by only trained and  
certified technicians. R-1234yf is flammable and operated at high pressure.  
Reclaim all refrigerants with proper equipment. Venting refrigerants directly to the  
atmosphere is harmful to individuals and environment.  
Air conditioning refrigerant label  
2C_RefrigerantTypeLabel  
You can find out which air conditioning refrigerant is applied to your vehicle on the label  
located inside of the hood.  
Convenience Features 265  
2C_RefrigerantLabel  
Each symbol and specification on the air conditioning refrigerant label is represented as  
the following:  
1. Classification of refrigerant  
2. Amount of refrigerant  
3. Classification of compressor lubricant  
4. Caution  
5. Flammable refrigerant  
6. To require registered technician to service air conditioning system  
266 Convenience Features  
Windshield Defrosting And Defogging  
WARNING  
Do not use the defrost level  
humid weather. The outer surface of the windshield may fog and reduce visibility, causing  
a collision that results in serious injury or death.  
position during cooling operation in extremely  
Set the mode selection button to the face level  
speed.  
position and lower the fan  
• For maximum defrost performance, set the temperature control switch to the highest  
temperature setting and the fan speed control to the highest setting.  
• If warm air to the floor is desired while defrosting or defogging, select the floor defrost  
position.  
• Before driving, clear all snow and ice from the windshield, rear window, side view  
mirrors, and all side windows.  
• Clear all snow and ice from the hood and air inlet to improve heater and defroster  
efficiency and to reduce the probability of fogging up the inside of the windshield.  
Manual climate control system  
To defog inside windshield  
2C_InsideDefrostProcedure_3  
1. Select any fan speed.  
2. Select the desired temperature.  
3. Select the front windshield defroster.  
4. The outside (fresh) air is selected automatically. The air conditioning automatically  
operates if the mode is selected to the defrost level position.  
If the air conditioning and outside (fresh) air position are not selected automatically, press  
the corresponding switch.  
Convenience Features 267  
To defrost outside windshield  
2C_InsideDefrostProcedure_4  
1. Set the fan speed to the highest (extreme right) position.  
2. Set the temperature to the hottest (extreme right) position.  
3. Select the front windshield defroster.  
4. The outside (fresh) air and air conditioning is selected automatically.  
Automatic climate control system  
To defog inside windshield  
2C_InsideDefrostProcedure  
1. Select the desired fan speed.  
2. Select the desired temperature.  
3. Press the defroster button (  
)
4. The air conditioning turns on according to the detected ambient temperature, the  
outside (fresh) air mode and higher fan speed are selected automatically.  
If the air conditioning, outside (fresh) air mode and higher fan speed are not selected  
automatically, adjust the corresponding switch.  
If the defrost switch is selected, the fan speed increases.  
268 Convenience Features  
To defrost outside windshield  
2C_InsideDefrostProcedure_2  
1. Set the fan speed to the highest position.  
2. Set the temperature to the hottest (HI) position.  
3. Press the defroster button (  
)
4. The air conditioning turns on according to the detected ambient temperature and the  
outside (fresh) air mode is selected automatically.  
If the defrost switch is selected, lower fan speed is adjusted to higher fan speed.  
Defogging logic  
To reduce the probability of fogging up the inside of the windshield, the air intake or air  
conditioning are controlled automatically according to certain conditions. To cancel or  
reset the defogging logic, do the following.  
1
Press the Engine Start/Stop button to the ON position.  
2 Press the defroster button ( ) or ( ).  
3 While pressing the air conditioning button, press the air intake control button at least 5  
times within 3 seconds  
The air intake control button indicator blinks 3 times to indicate that the defogging logic  
has been disabled. Repeat the steps again to re-enable the defogging logic.  
If the battery has been discharged or disconnected, it resets to the defog logic status  
Rear window defroster  
NOTICE  
Never use sharp instruments or window cleaners containing abrasives to clean the  
window to prevent damage to the rear window defroster.  
The defroster heats the window to remove frost, fog and thin ice from the interior and  
exterior of the rear window, while the engine is running.  
Convenience Features 269  
• To activate it, press the rear window defroster button located in the center control  
panel. The indicator on the rear window defroster button illuminates when the  
defroster is ON.  
Type A  
2C_RearWindowDefrost  
Type B  
2C_RearWindowDefrost_2  
• To turn off, press the rear window defroster button again.  
Information  
• If there is heavy accumulation of snow on the rear window, brush it off before  
operating the rear defroster.  
• The rear window defroster automatically turns off after about 20 minutes or when the  
Engine Start/Stop button is in the OFF position.  
Side view mirror defroster  
if equipped  
The side view mirror defrosters operate when you turn on the rear window defroster.  
270 Convenience Features  
Climate Control Additional Features  
Information  
The infotainment system may change after software updates. For more information, refer  
to the manual provided in the infotainment system and the quick reference guide.  
Air conditioning auto-drying  
The Air conditioning auto-drying feature dries the moisture in the air conditioner and  
reduces air conditioner odor. The blower motor automatically operates 30 minutes after  
the engine is turned off.  
Turning Air conditioning auto-drying on or off  
The Air conditioning auto-drying feature can be turned on and off by selecting  
Setup> Vehicle> Climate> A/C Automatic Drying.  
If the operating condition is satisfied after setting the feature, the operating condition  
appears on the infotainment system and the blower motor automatically operates.  
When the Air conditioning auto-drying feature is activated, the air conditioner sets the fan  
speed to the third level, selects outside (fresh) mode, and directs the air flow toward the  
face.  
Operating conditions  
The Air conditioning auto-drying feature operates under the following conditions:  
• The vehicle is turned off after operating the air conditioner for a certain period.  
• The battery level is sufficient and the outside temperature is above a certain level.  
Non-operating conditions  
The Air conditioning auto-drying feature stops operating under the following conditions:  
• The A/C Automatic Drying feature has operated for 10 minutes.  
• The Engine Start/Stop button is pressed, or the engine is on.  
• The climate control system is operated remotely.  
Information  
The Air conditioning auto-drying feature reduces air conditioner odors but may not  
remove all odors.  
Convenience Features 271  
Auto defogging system  
if equipped  
2C_RainSensor  
The Auto defogging reduces the possibility of fogging up the inside of the windshield by  
automatically sensing the moisture on inside the windshield.  
The auto defogging system operates when the heater or air conditioning is on.  
Information  
The Auto defogging system may not operate normally, when the outside temperature is  
below 14 °F (-10 °C).  
When the Auto Defogging System operates, the  
indicator illuminates.  
If high amount of humidity is detected in the vehicle, the Auto defogging system is  
enabled.  
The following steps are performed automatically:  
Step 1. Air conditioning turns on and Outside (fresh) mode is selected.  
Step 2. Defrost level is selected.  
Step 3. Fan speed is set to the highest level.  
If the air conditioning is off or recirculated air is manually selected while Auto defogging  
system is ON, the Auto defogging system  
operation has been canceled.  
indicator blinks to signal that manual  
Turning the Auto defogging system on or off  
Climate control system  
Press the front windshield defroster button for 3 seconds when the Engine Start/Stop  
button is in the ON position. When the Auto defogging system is turned off, the  
symbol blinks 3 times and ADS OFF appears on the climate control information screen.  
When the Auto Defogging system is turned on, the  
without a signal.  
symbol blinks 6 times  
Infotainment system  
Auto Defogging System can be turned on and off by selecting Setup > Vehicle > Climate  
> Defog/Defrost Options > Auto Defog from the infotainment system.  
272 Convenience Features  
Information  
• Do not select recirculated air while the Auto defogging system is operating.  
• When Auto defogging system is operating, fan speed adjustment, temperature  
adjustment, and air intake control selection are all disabled.  
NOTICE  
Do not remove the sensor cover located on the top of the windshield glass. Damage may  
not be covered by your vehicle warranty.  
Auto dehumidify  
if equipped  
To increase cabin air quality and reduce windshield misting, recirculation mode switches  
off automatically after about 5 to 30 minutes, depending on the outside temperature, and  
the air intake changes to fresh mode.  
Turning Auto dehumidify on or off  
Climate control system  
To turn the Auto dehumidify feature on or off, select Face level (  
) mode and press the  
) button at least 5 times within 3 seconds while pressing the A/C  
air intake control (  
button. When Auto dehumidify is turned on, the air intake control button indicator blinks  
6 times. When turned off, the indicator blinks 3 times.  
Infotainment system  
Auto dehumidify can be turned on and off by selecting Setup > Vehicle > Climate >  
Automatic Ventilation > Automatic Dehumidify from the infotainment system.  
Sunroof inside air recirculation  
if equipped  
When the sunroof is opened, the fresh mode is automatically selected. If you press the  
air intake control button, the recirculation mode is selected but changes back to the fresh  
mode after 3 minutes. When the sunroof is closed, the air intake position returns to the  
previous position.  
Recirculating air when washer fluid is used  
if equipped  
Recirculation mode automatically activates to reduce the scent of the washer fluid  
entering the cabin when the windshield washer is used.  
When it is shifted to the recirculation mode, the unpleasant scent may flow into the  
vehicle.  
However, in cold weather to prevent the windshield from fogging up, the recirculation  
mode may not be selected.  
Convenience Features 273  
Turning Activation on a washer fluid use on or off  
Climate control system  
To turn the Activate on washer fluid use feature on or off, select Floor level (  
) mode,  
and then press the air intake control (  
pressing the A/C button.  
) button 5 times within 3 seconds while  
When Activate on washer fluid use is turned on, the air intake control button indicator  
blinks 6 times. When turned off, the indicator blinks 3 times.  
Infotainment system  
Activate on washer fluid use can be turned on and off by selecting Setup > Vehicle >  
Climate > Recirculate Air > Activate upon Washer Fluid Use from the infotainment system.  
Recirculating air when entering a tunnel  
if equipped  
To prevent the inflow of polluted air into the vehicle when passing through a tunnel,  
the climate control system is operated using the navigation map information and vehicle  
speed as follows:  
To use this feature, it can be enabled from the infotainment system. Select: Settings >  
Vehicle > Climate > Recirculate Air  
• Activation upon Entering a Tunnel : The climate control system switches to recirculation  
mode for about 7 seconds before entering a tunnel.  
Operating conditions  
• The climate control system's fresh mode is selected.  
Information  
• The activation time for the feature may differ because of the time gap between the GPS  
and vehicle speed.  
• The feature activates until you have passed through continuous tunnels.  
• When entering a tunnel, recirculation mode may cause fogging of the windshield. Use  
the front windshield defroster button.  
• The feature does not operate in short tunnels.  
• The feature may not activate if the GPS is not working properly.  
• The infotainment system may change after software updates. For more information,  
refer to the user's manual provided in the infotainment system and the quick reference  
guide.  
Scheduled ventilation control  
The Scheduled Ventilation Control releases hot air in the vehicle to lower cabin  
temperature before getting in the vehicle.  
Depending on the outside ambient temperature, the blower is operated for 5 to 15  
minutes while the vehicle is parked.  
Turning Schedule Ventilation Control On or Off  
The Schedule Ventilation Control can be turned on and off by selecting 'Setup > Vehicle >  
Climate > Automatic Ventilation > Scheduled Ventilation Control' from the infotainment  
274 Convenience Features  
screen. Also, the starting time can be set within 24 hours. Schedule Ventilation Control  
operates only once when the feature is set.  
Convenience Features 275  
Storage Compartment  
WARNING  
Never store cigarette lighters, propane cylinders, or other flammable/explosive materials  
in the vehicle. These items may catch fire and/or explode if the vehicle is exposed to hot  
temperatures for extended periods.  
WARNING  
ALWAYS keep the storage compartment covers closed securely while driving. Items inside  
your vehicle are moving as fast as the vehicle. If you have to stop or turn quickly, or if  
there is a collision, the items may fly out of the compartment and may cause an injury if  
they strike the driver or a passenger.  
NOTICE  
To avoid possible theft, do not leave valuables in the storage compartments.  
Center console storage  
2C_CenterConsoleBox  
To open:  
Press the button.  
276 Convenience Features  
Removable partition  
2C_PartitionCenterConsole  
The removable partition (1) can be removed to expand the storage compartment.  
Glove box  
2C_GloveBox  
To open:  
Pull the lever (1).  
WARNING  
ALWAYS close the glove box door after use.  
An open glove box door may cause serious injury to a passenger in a collision, even if the  
passenger is wearing a seat belt.  
Convenience Features 277  
Passenger seat open tray  
2C_OpenTray  
You can use this space to store small items etc.  
WARNING  
Do not put any sharp object in the open tray. It may seriously injure you in the event of a  
sudden stop or a collision.  
278 Convenience Features  
Interior Features  
Cup holder  
Cups or small beverages cups can be placed in the cup holders.  
Front seat - Type A  
2C_CupHolderCenterConsole  
Front seat - Type B  
2C_CupHolderCenterConsole_2  
Push the button. The cup supporter protrudes from the front console.  
Push in the cup supporter after use.  
Rear seat armrest  
2C_RearSeatCupHolder  
Convenience Features 279  
Pull the armrest down to use the cup holders.  
WARNING  
• Avoid abrupt starting and braking when the cup holder is used to prevent spilling your  
drink. If hot liquid spills, you may be burned. Such a burn to the driver may cause loss  
of vehicle control resulting in a collision.  
• Only use soft cups in the cup holders.  
NOTICE  
• Keep your drinks sealed while driving to prevent spilling. If liquid spills, it may get into  
the vehicle's electrical/electronic system and damage electrical/electronic parts.  
• When cleaning spilled liquids do not use hot air to blow out or dry the cup holder. This  
may damage the interior.  
• Keep cans or bottles out of direct sun light and do not put them in a hot vehicle.  
Otherwise, they may explode.  
Sunvisor  
2C_Sunvisor  
To use the sunvisor, pull it downward.  
To use the sunvisor to block the sun from the side window, pull it rearward, release it from  
the bracket (1) and swing it to the side (2) toward the window.  
To use the vanity mirror, pull down the sunvisor and slide the mirror cover (3).  
Adjust the sunvisor forward or backward (4) as needed (if equipped). Use the ticket holder  
(5) to hold tickets.  
Close the vanity mirror cover securely and return the sunvisor to its original position after  
use.  
WARNING  
Do not block your view or the roadway when using the sunvisor.  
280 Convenience Features  
NOTICE  
The tab (5) adjacent to the vanity mirror on the sunvisor can be used for toll road  
tickets or self parking tickets. Use caution when inserting tickets into the ticket holder  
to avoid damage. Refrain from putting several tickets in the ticket holder as this could also  
damage the retaining tab.  
Power outlet  
Center console storage (inside)  
2C_PowerOutlet  
The power outlet is designed to provide power for mobile phones or other devices  
designed to operate with vehicle electrical systems.  
The devices should draw less than 180 W with the engine running.  
WARNING  
Avoid electrical shocks. Do not place your fingers or foreign objects (pin, etc.) into a  
power outlet or touch the power outlet with a wet hand.  
NOTICE  
To prevent damage to the power outlets:  
• Use the power outlet only when the engine is running and remove the accessory plug  
after use. Using the accessory plug for an extended period of time with the engine off  
could cause the battery to discharge.  
• Only use 12 V electric accessories that are less than 180 W in electric capacity.  
• Adjust the air conditioner or heater to the lowest operating level when using the power  
outlet.  
• Close the cover when not used.  
• Some electronic devices may cause electronic interference when plugged into a  
vehicle's power outlet.  
• Push the plug in as far as it goes. The plug may overheat and the fuse may open.  
• Only connect devices with reverse current protection or the current from the device  
battery may cause the vehicle's electrical/electronic system to malfunction.  
Convenience Features 281  
USB charger  
The USB charger is designed to recharge batteries of small size electronic devices using a  
USB cable.  
Front  
2C_ChargingOutlet  
Rear  
2C_USBChargePortCenterConsoleBox  
The USB charger is designed to recharge batteries of small size electronic devices using a  
USB cable.  
Electronic devices can be charged when the engine is running.  
Information  
• The battery charging state may be monitored on the electronic device.  
• Disconnect the USB cable from the USB port after use.  
• A smartphone or a tablet PC may get warmer during the recharging process. It does not  
indicate any malfunction with the charging system.  
• A smartphone or a tablet PC that does not use a USB cable to charge should be  
charged using its own charger.  
• Do not attempt to use the charging terminal either to turn on an audio or to play media  
with the infotainment system.  
• Charging may not be possible when using a Type-C to A converter sold by a mobile  
phone manufacturer or commercially available.  
282 Convenience Features  
NOTICE  
• Use the USB charger when the engine is running. Using the USB charger for prolonged  
periods of time with the Engine Start/Stop button in the ON position (engine off) may  
cause the battery to discharge.  
• To prevent damage to the USB charger:  
- Do not insert foreign objects or spill liquid into the outlet. The USB charging terminal  
may be damaged.  
- Do not use devices with working current exceeding 3,000 mA (3.0 A).  
• When charging an electrical device by using an USB converting adapter (C to A type),  
use a genuine adapter specified for your vehicle. A commonly used adapter is not  
equipped with any measures to prevent over current and maintain stability.  
Using an unspecified cable may damage the vehicle's USB charger or the connected  
devices. Contact an authorized HYUNDAI dealer for more information on accessories  
for HYUNDAI vehicles.  
• The use of non-genuine parts may damage the USB port and infotainment system.  
Damage cannot be covered by your vehicle warranty.  
Wireless smartphone charging system  
if equipped  
2C_WirelessSmartPhoneChargingSystem  
[A] Indicator light  
[B] Charging pad  
Charging your smartphone  
The wireless smartphone charging system charges only the Qi-enabled smartphones  
(
). Visit your smartphone manufacturer's website to check whether your smartphone  
þ
supports the Qi technology.  
The wireless charging process starts when you put a Qi-enabled smartphone on the  
wireless charging with the screen facing up.  
1
The wireless smartphone charger is available when all doors are closed, and when the  
Engine Start/Stop button is in the ON or START position.  
2 Turn on the wireless charging function from the Settings menu in the infotainment  
system.  
Convenience Features 283  
• Select: Setup > Vehicle > Convenience > Wireless Charging System for Mobile  
Devices  
3 Place the smartphone on the center of the wireless charging pad. The indicator light  
is orange when the smartphone is charging and turns blue when phone charging is  
complete.  
Information  
• Remove other items, including the smart key from the wireless charging pad.  
• For flip type smartphones, when using wireless charging, place the smartphone folded  
with the device's back placed on the center of the wireless charging unit.  
If your smartphone is not charging:  
• Move the smartphone on the charging pad.  
• Make sure the indicator light is orange.  
The indicator light blinks orange for 10 seconds if there is a malfunction in the wireless  
charging system.  
The system warns you with a message on the cluster display if the smartphone is still on  
the wireless charging pad after the vehicle is turned OFF and the front door is opened.  
284 Convenience Features  
NOTICE  
• The wireless smartphone charging system may not support certain smartphones, that  
do not meetthe Qispecification ( ).  
þ
• When placing your smartphone on the charging pad, position the phone in the middle  
of the mat for optimal charging performance. If your smartphone is off to the side, the  
charging rate may be less and in some cases the smartphone may experience higher  
heat conduction.  
• Wireless charging may stop temporarily when the smart key is used, either when  
starting the vehicle or locking/unlocking the doors, etc.  
• When charging certain smartphones, the charging indicator may not change to blue  
when the smartphone is fully charged.  
• The wireless charging process may temporarily stop, when temperature abnormally  
increases inside the wireless smartphone charging system. The wireless charging  
process does not restart, until the temperature falls.  
• The wireless charging process may temporarily stop when there is any metallic item,  
such as a coin, between the wireless smartphone charging system and smartphone.  
• For some manufacturer's smart phones, the system may not warn you even though  
the smart phone is left on the wireless charging unit. This is due to the particular  
characteristic of the smart phone and not a malfunction of the wireless charging.  
• When using a smartphone application, such as Android Auto, while charging, the  
charging process may be delayed or interrupted due to the smartphone overheating.  
This issue is not related to the wireless charging system but rather caused by the  
smartphone's self-heating. Therefore, disconnect the smartphone from the charging  
pad.  
• If the smartphone has a thick case, it may not charge.  
• Some magnetic items such as credit cards, phone cards, or transit cards may be  
damaged if left with the smartphone during the charging process.  
• If the smartphone is not completely contacting the charging pad, wireless charging  
may not operate properly.  
• If the Engine Start/Stop button is in the OFF position, the charging also stops.  
• When any smartphone without a wireless charging function or a metallic object is  
placed on the charging pad, a small noise may sound. This small sound because the  
vehicle discerns compatibility of the object placed on the charging pad. It does not  
affect your vehicle or the smartphone.  
• Some smartphones may not be able to charge depending on the internal structure of  
the smartphone. If this occurs, try charging the smartphone by moving it to the left  
or right side of the wireless charging pad. However, for some fold-able smartphones  
that have magnets inside the smartphone, try charging the smartphone while holding it  
close to the left side of the wireless charging pad.  
NOTICE  
Some magnetic items like credit cards, phone cards or rail tickets may be damaged if left  
with the smartphone during the charging process.  
Convenience Features 285  
Information  
This device complies with Part 15 of the FCC rules.  
Operation is subject to the following three conditions:  
1
This device may not cause harmful interference.  
2 This device must accept any interference received, including interference that may  
cause undesired operation.  
3 Changes or modifications not expressly approved by the party responsible for  
compliance could void the user's authority to operate the device.  
Clock  
The clock can be set from the infotainment system.  
WARNING  
Do not attempt to adjust the clock while driving.  
Coat hook  
Rear  
2C_CoatHook  
This hook is not designed to hold large or heavy items.  
286 Convenience Features  
WARNING  
Only hang soft clothing without heavy, sharp or breakable objects in the clothes pockets.  
In a collision or when the curtain airbag is inflated, the objects could move and cause  
serious injury.  
2C_CoatHookWarning  
Floor mat anchor(s)  
ALWAYS use the floor mat anchors to attach the front floor mats to the vehicle. The  
anchors on the front floor carpet keep the floor mats from sliding forward.  
WARNING  
To prevent serious injury or death from a floor mat interfering with the brake or  
accelerator pedals:  
• Remove any protective film on the carpet before installing a floor mat.  
• Check floor mats are securely attached to the vehicle's floor mat anchors before  
driving.  
• Do not use ANY floor mat that cannot be firmly attached to the vehicle's floor mat  
anchors.  
• Do not stack floor mats on top of one another (e.g. all-weather rubber mat on top of a  
carpeted floor mat). Only a single floor mat must be installed in each position.  
WARNING  
To avoid any interference with pedal operation, install the HYUNDAI floor mat designed  
for your vehicle.  
Convenience Features 287  
Cargo net holder  
if equipped  
2C_CargoFixingNet  
To keep items from shifting in the cargo area, use the 4 holders located in the cargo area  
side trim to attach the cargo net.  
Make sure the cargo net is securely attached to the holders in the cargo board.  
If necessary, contact your authorized HYUNDAI dealer to purchase a genuine accessory  
cargo net.  
WARNING  
• Avoid eye injury. Do not overstretch the cargo net. Always keep your face and body out  
of the cargo net's recoil path. Do not use the cargo net when the strap has visible signs  
of wear or damage.  
• Use the cargo net to keep only light items from shifting in the cargo area.  
Cargo area cover  
2C_CargoShelf  
Use the cargo area cover to hide items stored in the cargo area.  
• If the cargo area cover is connected to the liftgate, the cover lifts with the liftgate when  
opening the liftgate.  
• If you do not want the cargo area cover to lift with the liftgate, disconnect the strap (1)  
from the strap holder of the liftgate.  
288 Convenience Features  
Removing cargo area cover  
To remove the cargo area cover:  
1
Disconnect the strap (1) from the strap holder of the liftgate.  
2 Lift the cover diagonally and pull it out (2).  
To reinstall, follow the reverse order.  
CAUTION  
• When the cargo area cover is removed, you can secure the cover to the rear seatback  
not to distract you while driving.  
• Since the cargo area cover also lifts when opening the liftgate, move the items placed  
on top of the cover to a safe place so they do not fall.  
• Do not put excessive pressure or weight on the cargo area cover. The cargo area cover  
may be damaged.  
Increasing cargo area volume  
To increase cargo area volume:  
1
Open the liftgate and remove the cover according to "Removing cargo area cover".  
2 Push the cargo area cover in to reach the lower fixing part (A).  
• Be careful not to get the cover caught in the cargo.  
2C_CargoShelf_Volume1  
3 Insert the cargo area cover to the lower fixing part (A) on both sides.  
Convenience Features 289  
4 Lift the rear part of the cargo area cover and secure it with the stopper (B).  
2C_CargoShelf_Volume2  
• To release the cargo area cover, press the stopper (B), lower the cover, and pull out  
the cover diagonally.  
CAUTION  
When securing cover, be careful not to get the cover caught on the upper fixing part. The  
cargo area cover may be damaged.  
Cargo tray  
if equipped  
2C_CargoCompartment  
Use the cargo tray to organize and store small items such as tools. To use the tray, lift the  
luggage floor by the handle.  
CAUTION  
• When storing small or easily movable items, they may cause noise while driving.  
• Do not store fragile items in the cargo tray.  
Increasing cargo area volume (Lower position)  
To increase the cargo area volume:  
290 Convenience Features  
1
Lift the luggage floor by its handle and remove the cargo tray.  
2C_CargoBoard  
2 Remove the luggage floor and insert the luggage floor into the lower position. It may  
take a good push to fully seat it so it lays flat at the rear.  
2C_CargoBoard_2  
3 Unfold the top board.  
Convenience Features 291  
Exterior Features  
Roof side rails  
if equipped  
2C_RoofRack  
Your vehicle may come equipped with roof side rails. If your vehicle is equipped with roof  
rack rails, you can add roof rack crossbars as an accessory (not shown).  
Information  
• If the vehicle is equipped with a sunroof, do not position the cargo onto the roof side  
rails in such a way that it may interfere with sunroof operation.  
• Always take precautions to make sure the cargo does not damage the roof.  
• When carrying large objects on the roof side rails, make sure they do not exceed the  
overall roof length or width.  
• When carrying cargo on the roof side rails, take necessary precautions to make sure the  
cargo does not damage the roof of the vehicle.  
When carrying large objects on the roof side rails, make sure they do not exceed the  
overall roof length or width.  
292 Convenience Features  
WARNING  
• Loading cargo or luggage in excess of the specified weight limit on the roof side rails  
may damage your vehicle.  
200 lbs. (100 kg)  
EVENLY DISTRIBUTED  
ROOF SIDE RAILS  
• Avoid sudden starts, braking, sharp turns, abrupt maneuvers, or high speeds that may  
result in loss of vehicle control or rollover resulting in a collision. The vehicle center of  
gravity is higher when items are loaded onto the roof side rails.  
• Always drive slowly and turn corners carefully when carrying items on the roof side  
rails. Severe wind updrafts caused by passing vehicles or natural causes, can cause  
sudden upward pressure on items loaded on the roof side rails. This is especially true  
when carrying large, flat items such as wood panels or mattresses. This may cause the  
items to fall off the roof side rails and cause damage to your vehicle or others around  
you.  
• To prevent damage or loss of cargo while driving, check frequently before or while  
driving to make sure the items on the roof side rails are securely fastened.  
Hitch mounted accessories  
The maximum load for a hitch mounted accessory, with the weight of the accessory and  
the load, is 220 lbs. (100 kg). This would include bicycle racks, wheel chair racks, etc.  
The center of the weight must be within 19 inches (0.5 m) of the bumper. If the weight is  
further away, the capacity is reduced up to 10% per inch.  
• The weight of the rack and load must be reduced from the vehicle carrying capacity.  
For more information, refer to the "Vehicle load limit" section in chapter 6.  
Convenience Features 293  
Infotainment System  
NOTICE  
• Do not install an aftermarket HID headlight. Your vehicle's audio and electronic devices  
may not function properly.  
• Prevent chemicals such as perfume, cosmetic oil, sun cream, hand cleaner, and air  
freshener from contacting the interior parts because they may cause damage or  
discoloration.  
USB Port  
2C_USBPort  
Press the USB port selection button while the engine is running. Press the upper portion  
of the button (1) to charge an electronic device. Press the lower portion of the button (2)  
to charge and listen to music with a media storage device. The USB port can be used after  
either indicator light turns on.  
• You can use an USB cable to connect audio devices to the vehicle USB port.  
• After connecting a media storage device such as a MP3 or USB to the USB port, you  
can listen to music through the vehicle's speakers or play it on the infotainment system.  
• Small electronic devices can be charged.  
• Use the USB position to connect to wired Android Auto or Apple Car Play.  
Information  
• Some devices may not be charged through USB port.  
• When using a portable audio device connected to the power outlet, and the USB port  
at the same time, noise may occur during playback. If this happens, disconnect the  
power cable from the power outlet and use the portable audio device's power source.  
294 Convenience Features  
NOTICE  
• When connecting a Type-A USB or a memory device to a vehicle, use a genuine  
converting adapter (C to A type) specified for your vehicle. A commonly used adapter  
is not equipped with any measures to reduce noise, prevent overcurrent and maintain  
stability. Connecting an unspecified cable may damage the vehicle's USB port or the  
connected devices. Contact an authorized HYUNDAI dealer for more information on  
accessories for HYUNDAI vehicles.  
• The use of non-genuine parts may damage the USB port and infotainment system.  
Damage cannot be covered by your vehicle warranty.  
Antenna  
2C_SharkAntenna  
The shark fin antenna receives transmitted data (for example, AM/FM, SXM).  
Steering wheel remote controls  
2C_AudioButtonOverview  
NOTICE  
Do not operate multiple audio remote control buttons simultaneously.  
SEEK/PRESET (  
/
)
If the SEEK/PRESET switch is pushed up or down and held for 0.8 seconds or more, it  
functions in the following modes:  
• RADIO mode  
Convenience Features 295  
It functions as the AUTO SEEK select button. It seeks until you release the button.  
• MEDIA mode  
It functions as the FF/RW button.  
If the SEEK/PRESET switch is pushed up or down, it functions in the following modes:  
• RADIO mode  
It functions as the PRESET STATION UP/DOWN button.  
• MEDIA mode  
It functions as the TRACK UP/ DOWN button.  
VOLUME (VOL + / VOL -)  
Roll the knob up or down to adjust the volume.  
MODE  
Press the MODE button to toggle through Radio mode.  
MUTE (  
)
Press the VOLUME lever to mute or activate the sound.  
Infotainment system  
2C_AVNOverview  
For more information, refer to the separately supplied infotainment system manual.  
Voice recognition  
2C_SteeringWheelVoiceRecognitionButton  
296 Convenience Features  
See additional information in supplied Infotainment Manual.  
Bluetooth® wireless technology  
2C_SteeringWheelCallButton  
2C_Microphone  
1. Call/Answer/Call end button  
2. Microphone  
For more information, refer to the separately supplied infotainment system manual.  
CAUTION  
To prevent driver distractions, minimize your use of these features while driving.  
Distraction may cause a collision, resulting in serious injury or death.  
Convenience Features 297  
298 Convenience Features  

Related Topics

Accessing your vehicle Hyundai Digital Key 2 Touch Door locks Theft-alarm system Rear Occupant Alert (ROA) Steering wheel Mirrors Windows Wide sunroof Hood Liftgate Power liftgate Smart liftgate Fuel filler door Vehicle system OTA update Exterior lights High Beam Assist (HBA) Interior lights Wipers and washers Manual climate control system Automatic climate control system Windshield defrosting and defogging Climate control additional features Storage compartment Interior features Exterior features Infotainment system

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot