Turn signals and lane change signals
2C_TurnSignalSwitch
To signal a turn, push down on the lever for a left turn or up for a right turn in position (A).
If an indicator stays on and does not flash or if it flashes abnormally, one of the turn signal
bulbs may be burned out and may require replacement. Contact an authorized HYUNDAI
dealer.
One touch turn signal
To use One Touch Turn Signal, push the turn signal lever up or down to position (B) and
then release it.
The lane change signals blink 3, 5, or 7 times.
You can enable the One Touch Turn Signal function or choose the number of blinking
by selecting Setup > Vehicle > Lights > One Touch Turn Signal > 7 flashes/5 flashes/3
flashes/Off in the infotainment system.
Battery saver function
To prevent the battery from being discharging, the system automatically turns off the
parking light when the driver turns the vehicle off and opens the driver's door.
With this feature, the parking lights turn off automatically if the driver parks on the side of
road at night.
To keep the lights on when the vehicle is turned off:
• Turn the parking lights OFF and ON again using the headlight switch.
Headlight delay function
If the Engine Start/Stop button is in the ACC or OFF position with the headlights ON, the
headlights (and/or parking lights) remain on for about 5 minutes.
If the driver's door is opened and closed, the headlights are turned off after 15 seconds.
Also, with the vehicle off if the driver's door is opened and closed, the headlights (and/or
parking lights) are turned off after 15 seconds.
The headlights (and/or parking lights) can be turned off by pressing the lock button on the
smart key twice or turning the headlight switch to the OFF or AUTO position.
You can enable the headlight delay function by selecting Setup > Vehicle > Lights >
Headlight Delay in the infotainment system.
230 Convenience Features
English 
