WARNING
Make sure body parts or other objects are out of the way before closing the windows. The
automatic reverse feature does not operate while resetting the power window system.
Automatic reversal
if equipped
2C_WindowEmergencyStop
If a window senses any obstacle while it is closing automatically, it stops and lowers about
12 inches (30 cm) to allow the object to be cleared.
If the window detects any resistance while the power window switch is pulled up
continuously, the window stops upward movement and then lowers about 1 inch (2.5
cm).
If the power window switch is pulled up continuously again within 5 seconds after the
window is lowered by the automatic window reverse feature, the automatic window
reverse does not operate.
Information
The automatic reverse feature is active only when the “Auto Up” feature is used by fully
pulling up the switch to the second detent.
NOTICE
Do not install any accessories on the windows. The automatic reverse feature may not
operate.
WARNING
Make sure body parts or other objects are safely out of the way before closing the
windows to avoid injuries or vehicle damage.
Objects less than 0.16 inches (4 mm) in diameter caught between the window glass and
the upper window channel may not be detected by the automatic reverse window and
the window does not stop and reverse direction.
Convenience Features 199
English 
