Get Convenience Features -> Automatic climate control system Guide for Hyundai Kona SUV Second Generation (2023-2026)

Air flow direction

1C_ManualAirconModeSelectionOverview

Symbol

Operation

Direction

Air flow is directed toward the upper body and face.

Additionally, each outlet can be controlled to direct the air

discharged from the outlet.

B, D, F

Air flow is directed toward the face and the floor.

B, C, D, E, F

A, C, D, E, F

Most of the air flow is directed to the floor, with a small amount

of the air being directed to the windshield and side window

defrosters.

Most of the air flow is directed to the floor and the windshield

with a small amount directed to the side window defrosters.

A, C, D, E, F

A, D

Most of the air flow is directed to the windshield with a small

amount of air directed to the side window defrosters.

248 Convenience Features

MAX A/C

2C_MaxAircon

The MAX A/C mode is used to cool the inside of the vehicle faster. Air flow is directed

toward the upper body and face.

The air conditioning and recirculated air are both selected. Turn the fan speed mode to

adjust.

Instrument panel vents

Front

2C_FrontVent

Rear

2C_RearVent

Convenience Features 249

The instrument panel vent air flow can be directed up/down or left/right using the vent

adjustment lever.

Move the lever all the way to the

the air vents.

direction to close, and to the

direction to open

Temperature control

2C_TempCont

The temperature increases by turning the knob to the right. The temperature decreases

by turning the knob to the left.

Air intake control

Recirculation mode

WL_RecirculationModeLamp

With the recirculated air selected, air from the passenger compartment is drawn through

the climate control system.

Outside (fresh) mode

WL_RecirculationModeLamp_2

With the outside (fresh) air selected, air enters the vehicle from outside and is drawn

through the climate control system.

250 Convenience Features

Information

Using the system in the fresh air position is recommended.

Prolonged operation of the heater in the recirculated air position (without air conditioning

selected) can cause fogging of the windshield and side windows and the air within the

passenger compartment will become stale.

In addition, prolonged use of the air conditioning with the recirculated air position

selected will result in excessively dry air in the passenger compartment.

WARNING

To prevent serious injury or death:

• Continued climate control system operation in the recirculated air position may allow

humidity to increase inside the vehicle that could fog the windshield and the side

windows and obscure visibility.

• Do not sleep in a vehicle with the air conditioning or heating system on.

• Continued climate use of recirculated air may cause drowsiness or sleepiness, and loss

of vehicle control. Set the air intake control to the outside (fresh) air position while

driving.

Fan speed control

2C_FanSpeedCont

Turn the knob to the right to increase the fan speed and airflow. Turn the knob to the left

to decrease fan speed and airflow.

Setting the fan speed control knob to the “0” position turns off the fan.

Information

Operating the fan speed when the Engine Start/Stop button is in the ON position may

cause the battery to discharge.

Convenience Features 251

Air conditioning (A/C)

2C_ACOn

Press the A/C button to turn on the air conditioning system (indicator light ON). Press the

button again to turn off the air conditioning system.

System operation

Ventilation

1

Set the mode to the

position.

2 Set the air intake control to the outside (fresh) mode.

3 Set the temperature control to the desired position.

4 Set the fan speed control to the desired speed.

Heating

1

Set the mode to the

position.

2 Set the air intake control to the outside (fresh) mode.

3 Set the temperature control to the desired position.

4 Set the fan speed control to the desired speed.

5 If desired, turn the air conditioning ON with the temperature control knob set to heat in

order to dehumidify the air before it enters into the cabin.

If the windshield fogs up, set the mode to

the or

position.

Operation tips

• To help keep dust or unpleasant fumes from entering the vehicle through the

ventilation system, temporarily set the air intake control to the recirculation mode.

Be sure to return the control to the fresh air mode when the irritation has passed to

keep fresh air in the vehicle. This can help keep the driver alert and comfortable.

• To prevent interior fog on the windshield, set the air intake control to the fresh air

position and the fan speed to the desired position, turn on the air conditioning system,

and adjust the temperature control to the desired temperature.

Air conditioning

1

Start the engine. Press the air conditioning button.

2 Set the mode to the position.

3 Set the air intake control to the outside air or recirculated air position.

252 Convenience Features

4 Adjust the fan speed control and temperature control as desired.

NOTICE

• When using the air conditioning system, monitor the temperature gauge closely while

driving up hills or in heavy traffic when outside temperatures are high. Continue to use

the fan but turn off the air conditioning system if the temperature gauge indicates the

engine is overheating.

• Always use the air conditioning with the windows closed. In humid weather, if the

windows are open and the air conditioning is running, water droplets may form inside

the vehicle and potentially damage electrical equipment.

Air conditioning system operation tips

• If the vehicle has been parked in direct sunlight during hot weather, open the windows

for a short time to let the hot air inside the vehicle escape.

• After sufficient cooling has been achieved, switch back from the recirculated air

position to the outside fresh air position.

• To help reduce moisture inside of the windows on rainy or humid days, decrease the

humidity inside the vehicle by operating the air conditioning system with the windows

and sunroof closed. Control the temperature with the temperature control knob.

• Use the air conditioning system every month for a few minutes to ensure maximum

system performance.

• If you operate the air conditioner excessively, the difference between the temperature

of the outside air and that of the windshield may cause the outer surface of the

windshield to fog up, causing loss of visibility. In this case, set the mode selection

switch to the

setting.

position and set the fan speed control switch to the lowest speed

System maintenance

Cabin air filter

The cabin air filter is installed behind the glove box. It filters the dust or other pollutants

that enter the vehicle through the heating and air conditioning system.

Have the cabin air filter replaced by an authorized HYUNDAI dealer according to the

maintenance schedule. If the vehicle is being driven in severe conditions such as dusty or

rough roads and/or if transporting pets or occupants smoke inside the vehicle, then more

frequent cabin air filter inspections and changes are required.

Information

Replace the filter according to the Maintenance Schedule. If the vehicle is being driven

in severe conditions such as dusty, rough roads, more frequent climate control air filter

inspections and replacement are required.

Checking the amount of air conditioner refrigerant

If the amount of refrigerant is too low or too high, the performance of the air conditioning

is reduced. Have your vehicle inspected by an authorized HYUNDAI dealer.

Convenience Features 253

NOTICE

• The refrigerant system should only be serviced by trained and certified technicians in a

well-ventilated area to ensure proper and safe operation.

• Never repair the air conditioning evaporator (cooling coil) or replace with the one

removed from a used or salvaged vehicle. A new replacement evaporator must be

certified (and labeled) as meeting SAE Standard J2842.

WARNING

Vehicles equipped with R-1234yf

WL_RefrigerantWarning

To prevent serious injury, have the air conditioning system be serviced by only trained and

certified technicians. R-1234yf is flammable and operated at high pressure.

Reclaim all refrigerants with proper equipment. Venting refrigerants directly to the

atmosphere is harmful to individuals and environment.

Air conditioning refrigerant label

2C_RefrigerantTypeLabel

You can find out which air conditioning refrigerant is applied to your vehicle on the label

located inside of the hood.

254 Convenience Features

2C_RefrigerantLabel

Each symbol and specification on the air conditioning refrigerant label is represented as the following:

1. Classification of refrigerant

2. Amount of refrigerant

3. Classification of compressor lubricant

4. Caution

5. Flammable refrigerant

6. To require registered technician to service air conditioning system

Convenience Features 255

Automatic Climate Control System

if equipped

1C_DATCAircon

The climate control system buttons may differ depending on vehicle specification.

1. Driver's temperature control

2. Passenger's temperature control

3. AUTO (automatic control)

4. SYNC

5. Front windshield defroster

6. A/C (air conditioning)

7. OFF

8. Fan speed control

9. Mode selection

10.Air intake control

11. Rear window defroster

Automatic heating and air conditioning

The Automatic Climate Control System is controlled by setting the desired temperature.

1

Press the AUTO button. The modes, fan speeds, air intake, and air conditioning are

controlled automatically by the temperature setting.

You can control the fan speed in three stages by pressing the AUTO button during

automatic operation.

• HIGH: Provides rapid air conditioning and heating with the maximum fan speed

setting.

• MEDIUM: Provides air conditioning and heating with the mid-level fan speed setting.

• LOW: Fan speed is set to the lowest setting range.

256 Convenience Features

2C_AirconAutoButton

2 Push up or down the temperature control switch to set the desired temperature. If

the temperature is set to the lowest setting, the air conditioning system operates

continuously. After the interior has cooled sufficiently, adjust the switch to a higher

temperature set point whenever possible.

2C_AirconTempButton

To turn off the automatic operation, select any switch of the following:

• Mode selection switch

• Front windshield defroster button (Press the button one more time to deselect the

front windshield defroster function. The 'AUTO' sign illuminates on the information

display once again.)

• Fan speed control switch

• A/C button

The selected function is controlled manually while other functions operate

automatically.

For your convenience and to improve the effectiveness of the climate control, use the

AUTO button and set the temperature to 72 °F (22 °C).

Convenience Features 257

NOTICE

2C_SolarRadiationSensor

Never place anything near the sensor to ensure better control of the heating and cooling

system.

Manual heating and air conditioning

1

Start the engine.

2 Set the mode to the desired position. For improving the effectiveness of heating and

cooling, select:

• Heating:

• Cooling:

3 Set the temperature control to the desired position.

4 Set the air intake control to the outside (fresh) air position.

5 Set the fan speed control to the desired speed.

6 If air conditioning is desired, turn on the air conditioning system.

7

Press the AUTO button to convert to full automatic control of the system.

Mode selection

2C_AirconModeSelection

The mode selection switch controls the direction of the air flow through the ventilation

system.

258 Convenience Features

Convenience Features -> Automatic climate control system for Your Hyundai Kona SUV Second Generation (2023-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals