2023-2026 Hyundai Kona SUV Convenience Features -> Windows User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Convenience Features -> Windows for Your Hyundai Kona SUV Second Generation (2023-2026)

2. Operating HomeLink®  
1) Operating HomeLink®  
2C_ECMHomelink_3  
1
Press and release the desired programmed HomeLink button (1, 2 or 3).  
Information  
The HomeLink indicator (7) should light green, solid or flashing, and your programmed  
device should operate.  
If your device does not operate, the HomeLink programming was not successful, and  
you'll need to reprogram the button.  
2) Two-Way Communication Display Behavior  
2C_ECMHomelink_6  
Convenience Features 189  
1
Press and release one of the programmed HomeLink buttons (1, 2 or 3).  
2C_ECMHomelink_7  
2 The indicator (4) and (6) operates as below, if your garage door opener has Two-Way  
Communication functionality.  
• If the indicator (4) flashes in Orange, it indicates that the garage door is “Closing”.  
• The indicator (4) turns solid green once the garage door has closed.  
• If the indicator (6) flashes in Orange, it indicates that the garage door is “Opening”.  
• The indicator (6) turns solid green once the garage door has fully opened.  
• If the indicator (4) or (6) does not turn to green, it indicates that the last status of  
garage door was not received properly. The HomeLink mirror tries to receive the last  
known status of the garage door for a few seconds.  
3) Recalling Garage Door Status  
HomeLink mirror with Two-Way Communication provides a way to view the last stored  
message from the garage door opener. In order to recall the last known status of the last  
activated device, press the buttons “1 and 2” or “2 and 3” simultaneously.  
• If the indicator (4) appears solid Green, it indicates that the last activated device was  
“closed” properly.  
• If the indicator (6) appears solid Green, it indicates that the last activated device was  
“open” properly.  
3. Erasing HomeLink® Buttons  
1) Erasing and Reprogramming a Single HomeLink® Button:  
1
Press and hold the desired HomeLink button you want to re-program. DO NOT release  
the button.  
2 The HomeLink indicator light (7) will illuminate solid green. Release the button as soon  
as the HomeLink indicator light (7) begins to flash orange, usually about 20 seconds.  
3 Proceed with the steps in the “Programming a New HomeLink Button” section.  
Information  
If you do not complete the re-programming of a new device to the button, it will revert to  
the previously stored programming.  
190 Convenience Features  
2) The following instructions will erase ALL HomeLink® programming from ALL buttons:  
2C_ECMHomelinkDelete  
1
Press and hold the buttons (1) and (3) simultaneously  
2 The HomeLink indicator light (7) will illuminate solid Orange for about 10 seconds  
3 Release the buttons once the HomeLink indicator light (7) changes to Green and  
flashes rapidly  
4 Now all three HomeLink buttons (1), (2) and (3) are cleared of any programming  
Information  
HomeLink® and the HomeLink® House logo are registered trademarks of Gentex  
Corporation.  
The myQ logo is a registered trademark of The Chamberlain Group, Inc.  
FCC (USA) and ISED (Canada)  
This device complies with FCC rules part 15 and Innovation, Science, and Economic  
Development Canada RSS-210. Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) This device must accept  
any interference that may be received including interference that may cause undesired  
operation. WARNING: The transmitter has been tested and complies with FCC and ISED  
rules. Changes or modifications not expressly approved by the party responsible for  
compliance could void the user's authority to operate the device.  
This equipment complies with FCC and ISED radiation exposure limits set forth for an  
uncontrolled environment. End Users must follow the specific operating instructions for  
satisfying RF exposure compliance. This transmitter must be at least 20cm from the  
user and must not be co-located or operating in conjunction with any other antenna or  
transmitter.  
FCC (Htats-Unis) et ISED (Canada)  
Cet appareil est conforme aux reglements de la FCC, section 15, et au CNR-210  
d'Innovation, Sciences et Dhveloppement economique Canada. Le fonctionnement est  
assujetti aux deux conditions suivantes: (1) cet appareil ne doit pas causer d'interferences  
nuisibles et (2) cet appareil doit accepter toute interference recue, y compris celle qui  
pourrait entrainer un dysfonctionnement. MISE EN GARDE: L'emetteur a subi des tests  
et est conforme aux reglements de la FCC et d'ISDE. Les changements ou modifications  
non approuves explicitement par la partie responsable de la conformite pourraient rendre  
caduque l'autorisation de l'utilisateur de se servir du dispositif.  
Convenience Features 191  
Cet appareil est conforme aux limites d'exposition aux radiations de la FCC et d'ISDE  
etablies pour un environnement non controle. Les utilisateurs finaux doivent respecter  
les instructions d'utilisation specifiques pour satisfaire aux exigences de conformite aux  
expositions de RF. L'emetteur doit se trouver a 20 cm au minimum de l'utilisateur et ne  
doit pas etre situe au meme endroit que tout autre emetteur ou antenne ni fonctionner  
avec un autre emetteur ou antenne.  
Mejico  
La operacion de este equipo esta sujeta a las siguientes dos condiciones: (1) es posible  
que este equipo o dispositivo pueda no causar interferencia danina, y (2) este dispositivo  
o dispositivos deben aceptar cualquier interferencia, que incluye la interferencia que  
puede causar su operacion no deseada.  
HomeLink 5 Programing Flow Chart  
1C_ECMHomelinkFlowChart  
192 Convenience Features  
Side view mirrors  
2C_SideViewMirror  
Your vehicle is equipped with both left-hand and right-hand side view mirrors. The mirrors  
can be adjusted with the mirror adjustment control switch. Adjust the side view mirrors to  
your desired position before driving. The side view mirrors can be folded to help prevent  
damage when going through an automatic car wash or when passing through a narrow  
street.  
WARNING  
The right side view mirror is convex. Objects seen in the mirror are closer than they  
appear.  
Use the inside rearview mirror or turn your head and look to determine the actual  
distance of other vehicles prior to changing lanes.  
WARNING  
Do not adjust or fold the side view mirrors while driving. This may cause loss of vehicle  
control resulting in a collision.  
NOTICE  
• Do not scrape ice off the mirror face. This may damage the surface of the glass.  
• If the mirror is jammed with ice, do not adjust the mirror by force. Use an approved  
de-icer (not radiator antifreeze) spray, or a sponge or soft cloth with very warm water,  
or move the vehicle to a warm place and allow the ice to melt.  
• Do not clean the mirror with harsh abrasives, fuel, or other petroleum based cleaning  
products.  
Convenience Features 193  

Related Topics

Convenience Features
Accessing your vehicle Hyundai Digital Key 2 Touch Door locks Theft-alarm system Rear Occupant Alert (ROA) Steering wheel Mirrors Wide sunroof Hood Liftgate Power liftgate Smart liftgate Fuel filler door Vehicle system OTA update Exterior lights High Beam Assist (HBA) Interior lights Wipers and washers Manual climate control system Automatic climate control system Windshield defrosting and defogging Climate control additional features Storage compartment Interior features Exterior features Infotainment system

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot