Get CONTROLS -> Displays Guide for Mini Cooper 2 Door Fourth Generation (2024-2026)

Displays

CONTROLS

Displays

–

Configured interval for displaying trip

data.

Vehicle features and options

Average fuel consumption depending

on the configured interval.

This chapter describes model-specific

equipment, systems, and functions that are

currently available, or may become available

in the future, even if they are not present in

the vehicle.

Travel time depending on the config-

ured interval.

Distance traveled depending on the

configured interval.

Additional information:

Distance traveled in Coasting mode.

Vehicle equipment, refer to page 8.

Current consumption

Trip data

The current fuel consumption display al-

lows you to check the current fuel consump-

tion, e.g., to drive economically and in an

environmentally-friendly manner.

Principle

The trip data display provides various in-

formation about the trip, e.g., average con-

sumption or trip distance.

Average consumption

The average fuel consumption is displayed

depending on how the interval for display-

ing trip data is configured.

The values can be displayed and reset de-

pending on different intervals.

Viewing trip data

The Interaction Unit can be used to view

the trip data. There are several ways to view

trip data:

Adjusting the display of the trip

data

The intervals for displaying trip data can be

configured.

–

Go through the menu as follows: Apps

menu / "Vehicle" / "Trip data".

1. To go to the Trip Data menu: Apps

menu / "Vehicle" / "Trip data".

Tap the range value on the Interaction

Unit.

2. Tap the interval button.

3. Select the desired setting:

On the Interaction Unit, tap the odome-

ter reading in the speedometer.

–

"for this trip": the values are auto-

matically reset approx. four hours af-

ter the vehicle has come to a stand-

still.

Additional information:

Speedometer, refer to page 139.

Display

The following trip data is displayed:

–

"since last refuel": the values are au-

tomatically reset after refueling with

a larger quantity of fuel.

131

Online Edition for Part no. 01405B37A59 - II/24

CONTROLS

Displays

–

"since factory": the values since the

time of the factory delivery are dis-

played.

Safety information

Warning

"since Individual": the values since

the last manual reset are displayed.

The values can be reset at any time.

When extending and retracting the projec-

tion screen of the Head-up display, body

parts can be jammed. There is a risk of in-

jury. Make sure that the area of movement

of the projection screen is clear when ex-

tending and retracting.

Resetting average values manually

The average trip data values can be reset

manually. The following interval is activated

and the average values are reset: "since

Individual".

NOTICE

Via the Interaction Unit:

The Head-up display consists of sensitive

components that can easily be scraped or

damaged. There is a risk of damage to

property. Do not place any objects on the

Head-up display, attach to system compo-

nents or plug into the system. Do not move

the moving parts manually.

1. Go through the menu as follows: Apps

menu / "Vehicle" / "Trip data".

2.

Tap the button for resetting trip

data.

MINI Head-up display

Overview

Principle

The Head-up display projects important in-

formation in the driver's field of view, for

instance the speed. Information can be re-

corded without you having to look away

from the road.

The Head-up display can be configured as

necessary, e.g., adjust the brightness.

The Head-up display is switched on.

General information

Follow instructions for cleaning the Head-

up display in the Vehicle Care chapter.

Displayable information

The following information is displayed on

the Head-up display:

Additional information:

Caring for special components, refer to

page 344.

–

Speed.

Navigation instructions.

Check Control messages.

Shift lights.

132

Online Edition for Part no. 01405B37A59 - II/24

Displays

CONTROLS

–

Depending on vehicle equipment: Sport

Boost function.

–

Wet road.

Unfavorable light conditions.

–

Lists and messages.

The driver assistance systems.

Check Control

Some of this information is only displayed

briefly as needed.

Principle

The Check Control system monitors func-

tions in the vehicle and notifies you of

faults in the monitored systems.

Turning the Head-up display on/off

When switching on, the projection screen

of the Head-up display is extended. When

switching off, the projection screen of the

Head-up display is retracted again.

A Check Control message, combining indi-

cator lights or warning lights and text, ap-

pears on the Interaction Unit and Head-up

display, where applicable. In addition, an

acoustic signal may sound.

To turn the Head-up display on/off, go

through the menu as follows: Apps menu /

"Vehicle" / "Displays" / "Head-up display" /

"Head-up display".

Some Check Control messages are hidden

automatically after approx. 20 seconds, but

they will be stored. Stored Check Control

messages can be displayed on the Interac-

tion Unit. Urgent Check Control messages

are permanently displayed but may be hid-

den temporarily.

Settings

Individual settings can be entered for the

Head-up display such as for the height,

brightness or illustration. You can also set

up specific views on the Head-up display

separately, e.g., for Driver Assistance infor-

mation.

Hiding Check Control messages

Permanently displayed Check Control mes-

sages can be hidden temporarily. These

messages are automatically displayed again

after approx. 8 seconds.

1. Go through the menu as follows: Apps

menu / "Vehicle" / "Displays" / "Head-up

display".

2. Select the desired setting.

The close icon next to the Check Control

message indicates whether the Check Con-

trol message can be hidden.

Depending on vehicle equipment, the height

of the Head-up display can be stored using

the memory function.

Displaying stored Check Control

messages

Saved Check Control messages and addi-

tional information such as the cause of a

fault or the required action can be called up

via Check Control.

Visibility of the display

The visibility of the displays in the Head-up

display is influenced by the following fac-

tors:

–

Seat position.

Dust or dirt on the projection screen of

the Head-up display.

–

Sunglasses with certain polarization fil-

ters.

133

Online Edition for Part no. 01405B37A59 - II/24

CONTROLS

Displays

Depending on the Check Control message,

further help can be selected.

Red lights

Seat belt reminder

1. Go through the menu as follows: Apps

menu / "Vehicle" / "Vehicle status" /

"Check Control".

The seat belt on the driver's seat is

not engaged.

Additional information:

2. Select the desired text message.

Seat belt reminder, refer to page 100.

Display

A Check Control message, consisting of text

and an icon, is displayed. Additional instruc-

tions can be viewed by tapping on the text.

Airbag system

Warning light illuminates briefly: In-

dicates that the entire airbag system

and seat belt tensioners are opera-

tional when drive-ready state is switched

on.

If several faults occur at once, the messages

are displayed consecutively.

Certain messages displayed while driving

are displayed again after drive-ready state is

switched off.

Warning light does not illuminate or illumi-

nates continuously: The airbag system or

seat belt tensioners may not be operational.

Have the vehicle checked immediately by

an authorized service center or another

qualified service center or repair shop.

Icons next to the menu bar indicate

whether a Check Control message is

active or saved.

Additional information:

Airbags, refer to page 161.

Parking brake

The parking brake is set.

Additional information:

Parking brake, refer to page 126.

Indicator lights and warning lights

Principle

Brake system

The indicator lights and warning lights

show the status of some vehicle functions

or indicate when there is a fault in moni-

tored systems.

The brake pads are worn or there is

another issue with the brake system.

The braking assistance may not be

operational. A higher pedal force

may be required for the braking

process.

Indicator lights and warning lights can illu-

minate in a variety of combinations and col-

ors.

Have the vehicle checked immediately by

an authorized service center or another

qualified service center or repair shop.

Some indicator lights are checked for

proper functioning and illuminate tempora-

rily when drive-ready state is turned on.

134

Online Edition for Part no. 01405B37A59 - II/24

Displays

CONTROLS

Risk of collision

The warning light illuminates or

flashes in conjunction with an acous-

tic signal if there is a risk of immi-

nent collision.

from the right detected. Increased aware-

ness is required.

The warning light flashes and a signal

sounds: risk of imminent collision with a

crossing vehicle detected. Immediately ini-

tiate braking or an evasive maneuver.

Additional information:

Forward Collision Mitigation, refer to

page 167.

Warning function at intersections, refer to

page 174.

Pedestrian Warning

Intersection Collision Warning: vehicle

detected from the left

The warning light illuminates: risk of

collision with a person, e.g., a pedes-

trian or a cyclist detected. Increased

awareness is required.

The warning light illuminates: risk

of collision with a vehicle crossing

from the left detected. Increased

awareness is required.

The warning light flashes and a signal

sounds: risk of imminent collision with a

person, e.g., a pedestrian or a cyclist de-

tected. Immediately initiate braking or an

evasive maneuver.

The warning light flashes and a signal

sounds: risk of imminent collision with a

crossing vehicle detected. Immediately ini-

tiate braking or an evasive maneuver.

Additional information:

Warning function for pedestrians, refer to

page 173.

Warning function at intersections, refer to

page 174.

Forward Collision Warning

Distance control

The warning light illuminates: risk

of collision, e.g., with a vehicle de-

tected. Increased awareness is re-

quired.

Warning light flashes and acoustic

signal sounds: Brake and evade as

necessary.

Additional information:

The warning light flashes and a signal

sounds: risk of imminent collision with a ve-

hicle detected. Immediately initiate braking

or an evasive maneuver.

Distance Control, refer to page 204.

Assisted Driving Mode

Additional information:

Warning light flashes and signal

sounds: The system is switched off

or will be interrupted very soon.

Warning function in rear-end collision sit-

uations, refer to page 170.

Additional information:

Intersection Collision Warning: vehicle

detected from the right

Assisted Driving Mode, refer to page 210.

The warning light illuminates: risk

of collision with a vehicle crossing

135

Online Edition for Part no. 01405B37A59 - II/24

CONTROLS

Displays

Assisted Driving Mode: Hands are not on

steering wheel

Assisted Driving Mode: Hands are not on

steering wheel

Warning light illuminates and acous-

tic signal sounds:

Steering wheel icon illuminates yel-

low: Do not grip the steering wheel

with your hands. The system is still

active.

Hands are not grasping the steering

wheel. System interruption is imminent.

Grab the steering wheel with your hands.

Additional information:

The system reduces the speed to a standstill

if applicable.

It is possible that the system will not exe-

cute any supporting steering movements.

Assisted Driving Mode, refer to page 210.

Grab the steering wheel immediately with

your hands.

Dynamic Stability Control

Warning light flashes: Dynamic Sta-

bility Control is regulating the driv-

ing and brake power. The vehicle is

stabilized. Reduce the vehicle speed and

adjust your driving style to the road condi-

tions.

Additional information:

Assisted Driving Mode, refer to page 210.

Yellow lights

Warning light illuminates: Dynamic Stabil-

ity Control has malfunctioned or is initializ-

ing. Driving stabilization is restricted or has

failed.

Antilock Braking System

The system may not be operational.

The Antilock Braking System is not

available.

If the warning light illuminates continu-

ously, have the vehicle checked immedi-

ately by an authorized service center or

another qualified service center or repair

shop.

The ability to steer may be restricted

during full braking.

Have the vehicle checked immediately by

an authorized service center or another

qualified service center or repair shop.

Additional information:

Dynamic Stability Control, refer to

page 193.

Antilock Braking System, refer to page 193.

Assisted Driving Mode

Dynamic Stability Control deactivated, or

increased driving dynamics activated

Warning light illuminates and acous-

tic signal sounds: A system interrup-

tion is imminent.

Dynamic Stability Control is deacti-

vated or enhanced driving dynamics

is activated.

Warning light flashes: A lane boundary has

been crossed.

Additional information:

–

Dynamic Stability Control, refer to

page 193.

Assisted Driving Mode, refer to page 210.

–

Setting for increased driving dynamics,

refer to page 195.

136

Online Edition for Part no. 01405B37A59 - II/24

Displays

CONTROLS

Drive-off support

Drive-off support is activated.

Tire pressure monitor, refer to page 300.

Steering system

Additional information:

The steering system may not be op-

erational.

Drive-off support, refer to page 196.

Have the vehicle checked by an au-

thorized service center or another qualified

service center or repair shop.

Flat tire monitor

Warning light illuminates: Flat Tire

Monitor is indicating a flat tire or

tire pressure loss.

Exhaust emissions

Reduce your speed and stop cautiously.

Avoid sudden braking and steering maneu-

vers.

–

The warning light illuminates:

The exhaust gas quality is declin-

ing, e.g., because the fuel filler

cap is fitted incorrectly. Have the

vehicle checked as soon as possi-

ble.

Additional information:

Flat tire monitor, refer to page 307.

Tire pressure monitor

–

The warning light flashes under certain

circumstances:

Warning light illuminates: Tire Pres-

sure Monitor is indicating a flat tire

or tire pressure loss. Follow the in-

This indicates that there is excessive

misfiring in the engine.

formation in the Check Control message.

Reduce the vehicle speed and have the

vehicle checked immediately; otherwise,

serious engine misfiring within a brief

period can seriously damage emission

control components, in particular the

catalytic converter.

Warning light flashes then illuminates con-

tinuously: Flat tires or tire pressure losses

cannot be detected.

–

Fault caused by systems or devices with

the same radio frequency: after leaving

the area of the interference, the system

automatically becomes active again.

Additional information:

Socket for OBD on-board diagnostics, refer

to page 326.

In the case of tires with special appro-

val: the tire pressure monitor was un-

able to complete the reset. Reset the

system again.

Green lights

Wheel without wheel electronics instal-

led: Have it checked by an authorized

service center or another qualified serv-

ice center or repair shop as needed.

Turn signal

The turn signal is turned on.

If the indicator light is flashing un-

usually fast, this indicates that a turn

signal bulb has failed.

Malfunction: have the vehicle checked

by an authorized service center or an-

other qualified service center or repair

shop.

Additional information:

Turn signal, refer to page 147.

Additional information:

137

Online Edition for Part no. 01405B37A59 - II/24

CONTROLS

Parking lights

Displays

Cruise Control

The system is active.

The parking lights are turned on.

Additional information:

Parking lights, low-beam headlights,

Cruise control, refer to page 201.

refer to page 151.

Distance control

Low-beam headlights

The low-beam headlights are turned

Indicator light illuminates: Vehicle

has been detected ahead of you. The

vehicle icon goes out if no vehicle

has been detected ahead of you.

on.

Additional information:

Indicator light flashes: Preceding vehicle

has driven off.

Parking lights, low-beam headlights, refer to

page 151.

Additional information:

Distance Control, refer to page 204.

Automatic High Beam Assistant

Low-beam headlights are on and Au-

tomatic High Beam Assistant is ena-

bled.

Speed Limit Assistant

The detected speed limit can be ap-

plied with the SET button. As soon

as the speed limit has been applied, a

green checkmark is displayed.

The high-beam headlights are turned on and

off automatically depending on the traffic.

Additional information:

Automatic High Beam Assistant, refer to

page 148.

Speed Limit Assistant, refer to page 214.

Lane departure warning

Assisted Driving Mode

Depending on vehicle equipment and

national-market version:

The system supports the driver in

keeping the vehicle within the lane.

Indicator light flashes: System is per-

forming a steering intervention.

Additional information:

Assisted Driving Mode, refer to page 210.

Additional information:

Lane departure warning, refer to page 178.

Blue lights

High-beam headlights

Automatic Hold holding the vehicle

High-beam headlights have been

turned on.

After stopping, the vehicle is au-

tomatically secured against rolling

away as soon as the indicator light

illuminates green.

Additional information:

High-beam headlights, refer to page 147.

Additional information:

Automatic Hold, refer to page 128.

138

Online Edition for Part no. 01405B37A59 - II/24

Displays

CONTROLS

Automatic High Beam Assistant

Assisted Driving Mode, refer to page 210.

High-beam headlights have been

turned on by the Automatic High

Beam Assistant.

White lights

Cruise Control with Distance Control

Additional information:

Automatic High Beam Assistant, refer to

page 148.

No Distance Control because acceler-

ator pedal is being pressed.

Additional information:

Gray lights

Distance Control, refer to page 204.

Seat belt reminder

Seat belt on the passenger seat or

another seat in the vehicle is not

buckled.

Speedometer

Principle

The speedometer provides detailed driving

information next to the speed, e.g., mileage.

Additional information:

Seat belts, refer to page 99.

Distance control

Overview

Indicator light flashes: The require-

ments to operate the system have

not been met. The system was de-

activated but applies the brakes until you

actively resume control by pressing on the

brake pedal or accelerator pedal.

Additional information:

Distance Control, refer to page 204.

1

Tachometerꢀꢁ140

Automatic Hold on standby

Power gaugeꢀꢁ140

Vehicle speed

When driving, the indicator light

shows that Automatic Hold is ready.

2

3

4

5

Odometer readingꢀꢁ131

Engine temperatureꢀꢁ141

Fuel gaugeꢀꢁ144

Additional information:

Automatic Hold, refer to page 128.

Assisted Driving Mode

Displaying the speedometer

To display the speedometer, tap the speed

value at the top of the Interaction Unit.

The system is on standby and does

not manipulate steering movements.

System activates automatically as

soon as all function conditions are fulfilled.

Additional information:

139

Online Edition for Part no. 01405B37A59 - II/24

CONTROLS

Displays

Icon

Description

Power gauge

Blue icon: cold drivetrain.

Principle

The power gauge indicates the currently

drawn drive power as a percentage.

White icon: increased drive

system temperature, for in-

stance due to sustained or

high power demand when

driving on mountain roads.

Enabling/disabling the power

gauge

The power gauge or tachometer is dis-

played, depending on the drive mode se-

lected.

Depending on vehicle

equipment and national-

market version:

Drive power restriction de-

termined by MINI Digital

Key.

Display

System-related functional

limitation.

A Check Control message is

displayed in addition where

applicable.

Tachometer

Needle near arrow 1: indicator for energy

recovery, e.g., while decelerating.

General information

Always avoid RPM in the red warning field.

In this range, the fuel supply is reduced to

protect the engine.

Needle near arrow 2: Drive power in per-

cent.

Reduced drive power

The available drive power may be reduced

due to certain factors. The power gauge is

automatically adjusted accordingly.

Activating/deactivating the

tachometer

The tachometer or power gauge is displayed

depending on the drive mode selected.

In addition, the icons on the power gauge

and tachometer indicate reduced drive

power.

Reduced rotational speed range

The available rotational speed range may

be reduced due certain factors such as a

cold drive system. The tachometer display

is automatically adjusted depending on the

available rotational speed range.

140

Online Edition for Part no. 01405B37A59 - II/24

Displays

CONTROLS

the limit position of the temperature dis-

play.

Standby state and drive-ready

state

Drive at moderate RPM and vehicle

speeds.

If OFF appears on the Interac-

tion Unit, drive-ready state is

turned off and standby state is

turned on.

–

At normal operating temperature, the

needle is in the middle or in the left half

of the temperature display.

If the engine is hot, the needle is in

the red temperature range. In addition, a

Check Control message is displayed.

If READY appears on the In-

teraction Unit, the Auto Start/

Stop function is ready to start

the engine automatically.

Indicator light

A red indicator light is displayed.

Additional information:

–

Operating state of the vehicle, refer to

page 39.

–

Auto Start/Stop function, refer to

page 115.

Selection lists

Principle

The Interaction Unit or Head-up display

provide lists of certain functions, which can

be operated as necessary:

Engine temperature

Principle

The engine temperature is displayed on the

speedometer.

–

Entertainment source.

Current audio source.

List of recent calls.

Shortcuts list.

Additional information:

Speedometer, refer to page 139.

Coolant, refer to page 322.

If necessary, the corresponding menu will

open.

Display

Displaying and using the list

The selection lists can be displayed and op-

erated using the operating elements on the

steering wheel.

–

If the engine is cold, the needle is in

the blue temperature range, close to

141

Online Edition for Part no. 01405B37A59 - II/24

CONTROLS

Displays

Example: changing the entertainment

source

Operating Function

elements

Change the entertainment

source.

1.

To select an entertainment

source, press the entertainment source

button on the right of the steering

wheel.

Pressing the button again

will close the currently dis-

played list.

Show list of most recent tele-

phone calls.

2.

To select an entertainment

source, turn the knurled wheel.

Displaying the list of short-

cuts.

3. Press the knurled wheel to confirm the

selected entertainment source.

Turn the knurled wheel: dis-

play the list for currently se-

lected entertainment source

or scroll up or down in the

list.

Example: selecting a radio station

1.

To select a radio station, press

the entertainment source button on the

right of the steering wheel.

Tilt knurled wheel in corre-

sponding direction: Move se-

lection to left or right.

2.

To switch to the radio stations

list, tilt the knurled wheel to the right.

Press knurled wheel: confirm

selection.

3. Turn the knurled wheel to select a radio

station.

Additional information:

4. Press the knurled wheel to confirm the

selected radio station.

Shortcuts, refer to page 46.

Display

Gear shift indicator

Principle

The shift point indicator recommends the

gear that best suits the current driving sit-

uation. Using the optimal gear supports an

efficient driving style.

General information

Selection lists, e.g., entertainment sources,

are shown on the Head-up display and Inter-

action Unit.

The gear shift indicator is active in manual

mode M depending on vehicle equipment

and national-market version.

142

Online Edition for Part no. 01405B37A59 - II/24

Displays

CONTROLS

Displays

Display

Information on upshifting/downshifting or

the engaged gear is displayed on the Inter-

action Unit.

On vehicles without a gear shift indicator,

the engaged gear is displayed.

Example Description

In continuous manual mode M:

Optimal gear is engaged.

Successive fields illuminating yellow indi-

cate an upcoming shift point.

With shift paddles: temporary

manual mode.

–

Shift before the red lights illuminate.

With shift paddles: Sport pro-

gram.

When the maximum rotational speed is

reached, the entire display flashes red

and the fuel supply is interrupted in or-

der to protect the engine.

Shift information.

Range

Additional information:

Shift paddles, refer to page 121.

Principle

The range indicates the distance that can

still be covered with the current tank of

fuel.

Shift lights

Principle

General information

The estimated range with remaining fuel is

displayed on the Interaction Unit.

Shift lights are temporarily displayed on the

Head-up display and indicate the correct

time to upshift in order to achieve rapid

acceleration.

With a low remaining range, a Check Con-

trol message is briefly displayed. A low re-

maining range means that engine functions

cannot always be ensured for sporty driv-

ing, e.g., when cornering at speed.

Functional requirement

Manual mode M must be activated for the

shift lights to appear.

The Check Control message appears con-

tinuously below a range of approx.

30 miles/50 km.

143

Online Edition for Part no. 01405B37A59 - II/24

CONTROLS

Displays

Safety information

Display

NOTICE

With a range below 30 miles/50 km,

the engine may no longer have sufficient

fuel. Engine functions are not ensured

anymore. There is a risk of damage to

property. Refuel promptly.

Display

Under the fuel gauge, an arrow next to the

fuel pump symbol indicates which side of

the vehicle the fuel filler flap is on.

The current range is displayed

as a numerical value next to

the fuel gauge.

The current range is displayed as numerical

value.

Indicator light

The yellow indicator light illumi-

nates, once the fuel reserve is

reached.

Fuel gauge

Principle

The current fill level of the fuel tank is dis-

played.

Vehicle status

General information

Vehicle inclination may cause the display to

vary.

General information

The status can be displayed and actions

performed for several systems such as for

Check Control.

Additional information:

Refueling, refer to page 284.

Displaying vehicle status

To display the vehicle status, go through the

menu as follows: Apps menu / "Vehicle" /

"Vehicle status".

144

Online Edition for Part no. 01405B37A59 - II/24

Displays

CONTROLS

ing and braking at any time, and actively

intervene where appropriate.

Overview

Icon

Description

"Flat Tire Monitor": Status

of the flat tire monitor, refer

to page 307.

Display

"Tire Pressure Monitor": sta-

tus of the Tire Pressure

Monitor, refer to page 300.

"Engine oil level": electronic

oil measurement, refer to

page 320.

"Check Control": displaying

stored Check Control mes-

sages, refer to page 133.

An example of active Driver Assistance:

Indicator lights and warning lights for Dis-

tance Control and Assisted Driving Mode

are displayed. At the same time, the Dis-

tance Control is animated in Assisted View.

"Service": display of the

service notifications, refer

to page 146.

Assisted View can also be activated

for the Head-up display via Settings.

Assisted View

System limits

The system's detection capability is limited.

Principle

With Assisted View, information on driver

assistance systems can be shown with the

help of a vehicle animation.

Only objects that are detected by the sys-

tem are taken into account.

Additional information:

–

Cameras, refer to page 34.

Safety information

Radar sensors, refer to page 35.

Warning

Outside temperature

The system cannot serve as a substitute

for the driver’s personal judgment in as-

sessing the traffic situation. Based on the

limits of the system, it cannot independ-

ently react to all traffic situations. There

is a risk of accident, injury, or property

damage. Adjust driving style to traffic con-

ditions. Watch the surrounding traffic sit-

uation closely, be ready to take over steer-

General information

If the indicator drops to +37℉/+3℃ or

lower, a signal sounds.

A Check Control message is displayed.

There is an increased risk of ice on roads.

145

Online Edition for Part no. 01405B37A59 - II/24

CONTROLS

Displays

Safety information

Service

Warning

Principle

Even at temperatures above +37 ℉/+3 ℃

there is a risk of icy roads, for instance

on bridges or shady sections of the road.

There is a risk of accident, injury, or prop-

erty damage. Modify your driving style

to the weather conditions at low tempera-

tures.

The service notifications indicate recom-

mended maintenance work.

General information

After switching on the vehicle, the Interac-

tion Unit briefly shows the next service ap-

pointment or the distance remaining until

the next required maintenance.

A service advisor can read out the mainte-

nance work from the vehicle key.

Date and time

Display

Various settings can be configured for dis-

playing the date and time.

More detailed information can be displayed.

Depending on vehicle equipment and na-

tional-market version, the time zone can

be set manually or automatically. Automatic

time zone adjustment automatically updates

the time, date, and time zone as necessary.

1. Go through the menu as follows: Apps

menu / "Vehicle" / "Vehicle status" /

"Service".

Maintenance measures as well as legally

mandated inspections are displayed.

The date is set automatically based on the

time zone.

2. Select the desired entry to bring up

more information.

1. Go through the menu as follows: Apps

menu / "Vehicle" / "System settings" /

"Time".

Entering appointment dates

The dates for mandatory vehicle inspections

can be entered.

2. Select the desired settings.

Make sure that the vehicle's date and time

are set correctly.

Setting the units of measure-

ment

1. Go through the menu as follows: Apps

menu / "Vehicle" / "Vehicle status" /

"Service" / "Vehicle inspection".

Depending on the national-market version,

you can set the units of measurement for

some values, for instance consumption, dis-

tances, and temperature.

2. Select the desired setting.

1. Go through the menu as follows: Apps

menu / "Vehicle" / "System settings" /

"Units".

2. Select the desired setting.

146

Online Edition for Part no. 01405B37A59 - II/24

CONTROLS -> Displays for Your Mini Cooper 2 Door Fourth Generation (2024-2026)

Related Topics

CONTROLS

Popular Owner Manuals

Latest Owner Manuals