2010-2019 Nissan Juke SUV Heater and air conditioner, and audio system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Heater and air conditioner, and audio system for Your Nissan Juke SUV First Generation (2010-2019)

4 Heater and air conditioner, and audio system  
Safety precautions ................................................................................... 4-3  
Center multi-function control panel (models with  
navigation system) ................................................................................... 4-3  
Audio system (if equipped) ............................................................... 4-15  
Audio operation precautions .................................................... 4-15  
Antenna .......................................................................................... 4-22  
FM-AM radio with Compact Disc (CD) player (Type A) .... 4-23  
FM-AM radio with Compact Disc (CD) player (Type B) .... 4-29  
FM-AM radio with Compact Disc (CD) player (Type C) .... 4-35  
Steering wheel switch for audio control (if equipped) ...... 4-40  
CD care and cleaning ................................................................ 4-40  
USB (Universal Serial Bus) Connection Port ...................... 4-40  
AUX (auxiliary) Input Jack .......................................................... 4-41  
Car phone or CB radio ...................................................................... 4-41  
Bluetooth® Hands-Free Phone System (Type A) ........................ 4-42  
Regulatory information ................................................................ 4-42  
Control buttons and microphone ............................................ 4-42  
Bluetooth® settings ..................................................................... 4-43  
Using the system ......................................................................... 4-44  
Bluetooth® Hands-Free Phone System (Type B) ....................... 4-48  
Regulatory information ................................................................ 4-48  
Control buttons and microphone ............................................ 4-48  
Using the system ......................................................................... 4-49  
Bluetooth® settings ..................................................................... 4-51  
Bluetooth® Hands-Free Phone System (Type C) ....................... 4-51  
Regulatory information ................................................................ 4-52  
Control buttons and microphone ............................................ 4-52  
Voice commands (for Mexico) ................................................. 4-53  
How to use touch screen display ................................................. 4-4  
How to use brightness control/display on·off button .............. 4-4  
How to use ENTER/Scroll dial ...................................................... 4-4  
How to use BACK button .............................................................. 4-4  
Vehicle information and settings (models with  
navigation system) ................................................................................... 4-5  
How to use INFO button ................................................................ 4-5  
How to use SETUP button ............................................................ 4-5  
Rear view monitor (for the Middle East and Mexico) .................... 4-6  
How to read displayed lines .......................................................... 4-7  
Difference between predictive and actual distances ............... 4-7  
How to adjust the screen ............................................................... 4-9  
Operating tips .................................................................................... 4-9  
Ventilators ............................................................................................... 4-10  
Center ventilator ............................................................................. 4-10  
Side ventilators ............................................................................... 4-10  
Heater and air conditioner ................................................................. 4-10  
Operating tips (for automatic air conditioner) ........................ 4-10  
Manual air conditioner .................................................................. 4-11  
Automatic air conditioner (models with Integrated  
Control System) ............................................................................. 4-13  
Servicing air conditioner .............................................................. 4-14  
Pairing procedure .......................................................................... 4-53  
Phonebook ....................................................................................... 4-53  
Making a call ................................................................................... 4-53  
Receiving a call .............................................................................. 4-53  
During a call .................................................................................... 4-54  
Ending a call ................................................................................... 4-54  
Bluetooth® settings ....................................................................... 4-54  
Telephone setup .......................................................................... 4-54  
Text messaging (for Mexico) ..................................................... 4-54  
Voice Recognition system (if equipped) ........................................ 4-56  
Using the system ......................................................................... 4-56  
System features ........................................................................... 4-56  
Voice commands ......................................................................... 4-57  
Troubleshooting guide ................................................................ 4-58  
CENTER MULTI-FUNCTION  
CONTROL PANEL (models with  
navigation system)  
SAFETY PRECAUTIONS  
WARNING:  
.
.
Do not adjust the heater and air conditioner  
controls or audio controls while driving so  
that full attention may be given to vehicle  
operation.  
If you noticed any foreign objects entering  
the system hardware, spilled liquid on the  
system, or noticed smoke or fumes coming  
out from the system, or any other unusual  
operation is observed, stop using the system  
immediately and contact the nearest  
NISSAN dealer. Ignoring such conditions  
may lead to an accident, fire or electric  
shock.  
.
Do not disassemble or modify this system. If  
you do, it may lead to an accident, fire, or  
electric shock.  
CAUTION:  
Do not use the system when the engine is not  
running for extended periods of time to prevent  
battery discharge.  
JVH0981X  
1.  
2.  
Display screen (P.4-4)  
For navigation system control buttons refer to  
the separate Navigation System Owner’s Man-  
ual.  
3.  
4.  
5.  
6.  
7.  
8.  
INFO button (P.4-5)  
Power/VOL (Volume) dial (P.4-35)  
Brightness control/display on·off button (P.4-4)  
Enter/Scroll dial (P.4-4)  
Back button (P.4-4)  
SETUP button (P.4-5)  
Heater and air conditioner, and audio system 4-3  
.
OK:  
HOW TO USE TOUCH SCREEN DISPLAY  
Touch screen operation  
Completes the character input.  
WARNING:  
Touch screen maintenance  
.
.
The glass display screen may break if it is hit  
with a hard or sharp object. If the glass  
screen breaks, do not touch it. Doing so  
could result in an injury.  
To clean the display screen, use a dry, soft cloth. If  
additional cleaning is necessary, use a small amount of  
neutral detergent with a soft cloth. Never spray the  
screen with water or detergent. Dampen the cloth first  
and then wipe the screen.  
To clean the display, never use a rough cloth,  
alcohol, benzine, thinner or any kind of  
HOW TO USE BRIGHTNESS CONTROL/  
DISPLAY ON·OFF BUTTON  
To change the day/night display mode and the display  
brightness, push the brightness control/display on·off  
solvent or paper towel with  
cleaning agent. They will scratch or deterio-  
rate the panel.  
a
chemical  
JVH0881X  
.
Do not splash any liquid such as water or car  
fragrance on the display. Contact with liquid  
will cause the system to malfunction.  
Selecting items:  
“
” button.  
Touch an item to select. For example, to select the  
“Treble” key, touch the “Treble” key on the screen.  
If no operation is performed within 5 seconds, the  
display will return to the previous display.  
To help ensure safe driving, some functions cannot be  
operated while driving.  
1
*
Touch up/down arrow  
previous or the next page.  
on the screen to display the  
Push and hold the brightness control/display on·off  
“
” button for more than 2 seconds to turn the  
The on-screen functions that are not available while  
driving will be “grayed out” or muted.  
Adjusting items:  
2
display off. Push the button again to turn the display  
on.  
Touch the “+” or “-”  
item.  
key to adjust the settings of an  
*
Park the vehicle in a safe location and then operate the  
navigation system.  
HOW TO USE ENTER/SCROLL DIAL  
Entering characters:  
Turn the ENTER/Scroll dial to select items on the  
screen and to adjust the levels of setting items. Push  
the dial to confirm the selected item or setting.  
Touch the letter or number key on the keyboard screen.  
Options below are available when inputting characters.  
CAUTION:  
.
.
ALWAYS give your full attention to driving.  
.
123/ABC:  
Avoid using vehicle features that could  
distract you. If distracted, you could lose  
control of your vehicle and cause an acci-  
dent.  
HOW TO USE BACK BUTTON  
Push the BACK button to return to the previous  
screen.  
Changes the keyboard between numbers and  
alphabets.  
.
.
Space:  
Inserts a space.  
Delete:  
Deletes the last entered character with one touch.  
Touch and hold the “Delete” key to delete all of the  
characters.  
4-4 Heater and air conditioner, and audio system  
VEHICLE INFORMATION AND  
SETTINGS (models with navigation  
system)  
Vehicle information can be checked and various  
settings can be adjusted on the display.  
Available items:  
Speed Sensitive Vol.:  
Speed sensitive volume function increases the volume  
of the audio system as the speed of the vehicle  
increases. Choose the desired effect level from 0  
(OFF) to 5. The higher the setting, the more the volume  
increases in relation to vehicle speed.  
.
.
.
.
Audio  
Designs and items displayed on the screen may vary  
depending on the models and specifications.  
Navigation  
Telephone & Bluetooth  
System  
HOW TO USE INFO BUTTON  
Push the INFO button to display the following  
information on the display screen.  
— Display  
AUX Level:  
— Clock  
This feature controls the volume level of incoming  
sound when an auxiliary device is connected to the  
system. Select the level from “Quiet”, “Medium”, and  
“Loud”.  
— Language  
Available items:  
— Camera Settings  
— Temperature Unit  
— Touch Click  
— Beep Tones  
— Factory Settings  
— Software Licenses  
.
.
My Apps  
Eco Score  
Navigation settings  
Navigation settings can be changed. See Navigation  
System Owner’s Manual for details.  
My Apps  
Some application services can be used with this  
system when linked to your smartphone. For details,  
see “NissanConnect App smartphone integration”  
(P.4-39).  
Telephone & Bluetooth settings  
Audio settings  
Telephone & Bluetooth settings can be changed. See  
“Bluetooth® Hands-Free Phone System (Type C)”  
(P.4-51) for details.  
Audio settings can be adjusted from the audio setup  
screen.  
Eco Score  
The Eco Score feature analyzes driving behavior and  
provides an overall score.  
1. Push the SETUP button.  
2. Select the “Audio” key.  
System settings  
Various system settings can be adjusted from the  
system settings.  
HOW TO USE SETUP BUTTON  
3. Select the item you wish to adjust.  
Bass/Treble/Balance/Fade:  
1. Push the SETUP button.  
Touch the adjustment bar next to the corresponding  
keys on the display to adjust the tone quality and  
speaker balance.  
2. Select the “System” key.  
3. Select the item you wish to adjust.  
The levels of these features can also be adjusted with  
the Enter/Scroll dial. See “FM-AM radio with Compact  
Disc (CD) player (Type C)” (P.4-35) for audio  
operations.  
Display:  
Select the corresponding keys to adjust the settings.  
.
Brightness:  
Adjusts the brightness of the display.  
Display Mode:  
.
JVH1010X  
Adjusts to fit the level of lighting in the vehicle.  
Touch the “Display Mode” key to cycle through  
options of the mode (Day, Night and Auto).  
Example  
Push the SETUP button to view and adjust the  
following setting items.  
Heater and air conditioner, and audio system 4-5  
REAR VIEW MONITOR (for the  
Middle East and Mexico)  
When the shift lever is shifted into the “R” (Reverse)  
position, the monitor display shows the view to the rear  
of the vehicle.  
.
Scroll Direction:  
Camera Settings:  
Adjusts the direction of the menu scroll. Choose  
either the up arrow or the down arrow.  
See “Adjusting screen (for models with navigation  
system)” (P.4-9) for details.  
The system is designed as an aid to the driver in  
detecting large stationary objects to help avoid  
damaging the vehicle. The system will not detect small  
objects below the bumper and may not detect objects  
close to the bumper or on the ground.  
Clock:  
Temperature Unit:  
Select the corresponding keys to adjust the settings.  
Select the temperature unit from 8C and 8F.  
.
.
.
Time Format:  
Touch Click:  
The time setting can be selected from 12 hour and  
24 hour formats.  
Turns the touchscreen click feature on or off. When  
turned on, a click sound will be heard every time a key  
on the screen is touched.  
WARNING:  
Date Format:  
The day, month and year display can be selected  
from five formats.  
Failure to follow the warnings and instructions  
for proper use of the rear view monitor could  
result in serious injury or death.  
Beep Tones:  
Turns the beep tones feature on or off. When turned  
on, a beep sound will be heard as a pop-up message  
appears on the screen.  
Clock Mode:  
Select the clock mode from Manual, Time Zone  
and Auto.  
.
The rear view camera is a convenience but it  
is not substitute for proper backing.  
a
Factory Settings:  
When “Manual” is selected, you can set the clock  
mode manually from the “Set Clock Manually”  
screen.  
Always turn your head and visually check  
that it is safe to reverse before doing so.  
Always back up slowly.  
Select this key to return all settings to default.  
Software Licenses:  
Select “Auto” to automatically maintain the time  
using GPS.  
.
Underneath the bumper and the corner  
areas of the bumper cannot be viewed on  
the rear view monitor because of its mon-  
itoring range limitation.  
Select this key to view software license information.  
.
Set Clock Manually:  
Mode (AM/PM), Hours, Minutes, Day, Month and  
Year can be set manually if “Manual” is selected in  
the Clock Mode setting.  
.
.
Objects viewed in the rear view monitor  
differ from actual distance because a wide-  
angle lens is used.  
.
.
Daylight Savings Time:  
Turns the daylight savings time on or off.  
Time Zone:  
Objects viewed in the rear view monitor  
appear visually opposite, just like ones  
viewed in the inside and outside rearview  
mirrors.  
Select the applicable time zone from the list.  
Language:  
.
.
Make sure that the back door is securely  
closed when backing up.  
Select a language to be displayed on the screen.  
Do not put anything on the rear view camera.  
The rear view camera is installed above the  
number plate.  
4-6 Heater and air conditioner, and audio system  
.
.
When washing the vehicle with high pres-  
sure water, be sure not to spray it around the  
camera. Otherwise, water may enter the  
camera unit causing water condensation on  
the lens, a malfunction, fire or an electric  
shock.  
.
.
The distance guide line and the vehicle width  
line should be used only as a reference  
when the vehicle is on a level paved surface.  
The distance viewed on the monitor is for  
reference only and may be different from the  
actual distance between the vehicle and  
displayed objects.  
DIFFERENCE BETWEEN PREDICTIVE AND  
ACTUAL DISTANCES  
Backing up on a steep uphill  
Do not strike the camera. It is a precision  
instrument. Otherwise, it may malfunction or  
When reversing the vehicle up a hill, objects  
viewed in the monitor are further than they  
appear. When reversing the vehicle down a  
hill, objects viewed in the monitor are closer  
than they appear. Use the inside mirror or  
glance over your shoulder to properly judge  
distances to other objects.  
cause damage resulting in  
electric shock.  
a
fire or an  
CAUTION:  
Do not scratch the camera lens when cleaning  
dirt or snow from the lens.  
The distance guide lines, which are displayed on the  
monitor, indicate the vehicle’s clearance and distance  
HOW TO READ DISPLAYED LINES  
A
between the obstacle and the bumper  
.
*
1
4
*
Displayed lines (  
to  
) indicate the distances  
*
between the obstacle and the bumper as follows:  
1
.
.
.
.
Red line  
: approx. 0.5 m (1.5 ft)  
*
2
Yellow line  
Green line  
Green line  
: approx. 1 m (3 ft)  
*
3
: approx. 2 m (7 ft)  
: approx. 3 m (10 ft)  
*
4
*
5
*
Vehicle width guide lines  
:
Indicate the vehicle width when backing up.  
SAA1978  
SAA2776  
When backing up the vehicle up a hill, the distance  
guide lines and the vehicle width guide lines are shown  
closer than the actual distance. For example, the  
A
WARNING:  
.
Use the displayed guide lines as a reference.  
The lines are highly affected by the number  
of occupants, fuel level, vehicle position,  
road condition and road grade. Always  
check with your eyes directly around the  
vehicle while reversing.  
display shows 1 m (3 ft) to the place  
, but the  
*
B
*
actual 1 m (3 ft) distance on the hill is the place  
.
Note that any object on the hill is further than it appears  
on the monitor.  
Heater and air conditioner, and audio system 4-7  
Backing up on a steep downhill  
Backing up near a projecting object  
Backing up behind a projecting object  
SAA1979  
JVH0232X  
SAA3475  
C
B
When backing up the vehicle down a hill, the distance  
guide lines and the vehicle width guide lines are shown  
further than the actual distance. For example, the  
A
The vehicle may seem to nearly clear the object in the  
display. However, the vehicle may hit the object if it  
projects over the actual backing up course.  
The position  
is shown further than the position  
*
*
C
in the display. However, the position  
the same distance as the position  
may hit the object when backing up to the position  
if the object projects over the actual backing up  
course.  
is actually at  
. The vehicle  
A
*
A
*
display shows 1 m (3 ft) to the place  
, but the  
*
*
B
*
actual 1 m (3 ft) distance on the hill is the place  
.
Note that any object on the hill is closer than it appears  
on the monitor.  
4-8 Heater and air conditioner, and audio system  
1
display on·off  
button  
.
HOW TO ADJUST THE SCREEN  
*
OPERATING TIPS  
Adjust brightness to the preferred setting using the  
.
When the shift lever is shifted to the “R” (Reverse)  
position, the monitor screen automatically  
changes to the rear view monitor mode.  
Adjusting screen (for models with navigation  
system)  
2
ENTER/Scroll dial  
.
*
Adjusting screen (for models without naviga-  
tion system)  
Operation with touch screen:  
1. Push the SETUP button.  
.
.
When the view is switched, the display images on  
the screen may be displayed with some delay.  
When the temperature is extremely high or low,  
the screen may not clearly display objects. This is  
not a malfunction.  
2. Select the “System” key.  
3. Select the “Camera Display Settings” key.  
4. Select the item you wish to adjust.  
.
.
When strong light is directly coming on the  
camera, objects may not be displayed clearly.  
This is not a malfunction.  
.
Display Mode:  
Adjusts to fit the level of lighting in the vehicle.  
Touch the “Display Mode” key to cycle through  
options of the mode (Day, Night and Auto).  
Vertical lines may be seen in objects on the  
screen. This is due to strong reflected light from  
the bumper. This is not a malfunction.  
.
.
.
Brightness:  
.
.
The screen may flicker under fluorescent light. This  
is not a malfunction.  
Adjusts the brightness of the display.  
Contrast:  
JVH0867X  
The colors of objects on the rear view monitor may  
differ somewhat from the actual color of objects.  
This is not a malfunction.  
2
1. Push the ENTER/SETTING button  
.
Adjusts the level of contrast.  
Color:  
*
1
2. Turn the TUNE FOLDER knob  
*
to highlight the  
“Brightness” or the “Contrast” key.  
Adjusts the level of the color.  
.
.
Objects on the monitor may not be clear in a dark  
environment. This is not a malfunction.  
2
.
*
3. Push the ENTER/SETTING button  
Operation with buttons:  
1
4. Adjust the level using the TUNE FOLDER knob  
*
If dirt, rain or snow accumulates on the camera,  
the rear view monitor may not display object  
clearly. Clean the camera.  
2
*
and then push the ENTER/SETTING button  
to  
apply the adjustment.  
.
Do not use alcohol, benzine, or thinner to clean the  
camera. This will cause discoloration. To clean the  
camera, wipe with a cloth dampened with diluted  
mild cleaning agent and then wipe with a dry cloth.  
NOTE:  
Do not adjust the Brightness or Contrast of the  
rear view monitor while the vehicle is moving.  
.
.
Do not damage the camera as the monitor screen  
may be adversely affected.  
Do not use wax on the camera window. Wipe off  
any wax with a clean cloth dampened with mild  
detergent diluted with water.  
JVH0984X  
To adjust the screen brightness when the rear view  
monitor is displayed, push the brightness control/  
Heater and air conditioner, and audio system 4-9  
VENTILATORS  
HEATER AND AIR CONDITIONER  
OPERATING TIPS (for automatic air condi-  
tioner)  
CENTER VENTILATOR  
WARNING:  
.
.
The heater and air conditioner operate only  
when the engine is running.  
Never leave children or adults who would  
normally require the support of others alone  
in the vehicle. Pets should not be left alone  
either. They could unknowingly activate  
switches or controls and inadvertently be-  
come involved in a serious accident and  
injure themselves. On hot, sunny days,  
temperatures in  
a
closed vehicle could  
SAA3338  
quickly become high enough to cause se-  
vere or possibly fatal injuries to people or  
animals.  
SAA2368A  
Adjust the air flow direction of the ventilators by moving  
the center knob (up/down, left/right) until the desired  
position is achieved.  
.
.
Do not use the recirculation mode for long  
periods as it may cause the interior air to  
become stale and the windows to fog up.  
SIDE VENTILATORS  
Do not adjust the heating and air condition-  
ing controls while driving so that full atten-  
tion may be given to vehicle operation.  
The heater and air conditioner operate when the  
engine is running. The air blower will operate even if  
the engine is turned off and the ignition switch is in the  
“ON” position.  
SAA3431  
*: The layout illustrated is for the Left-Hand Drive  
(LHD) models. In the Right-Hand Drive (RHD) models,  
these components are located on the opposite side.  
NOTE:  
.
Odors from inside and outside the vehicle  
can build up in the air conditioner unit. Odor  
can enter the passenger compartment  
through the vents.  
SAA3126  
When the engine coolant temperature and outside air  
temperature are low, the air flow from the foot outlets  
may not operate. However, this is not a malfunction.  
After the coolant temperature warms up, the air flow  
from the foot outlets will operate normally.  
Open or close the vents, and adjust the air flow  
direction of ventilators as illustrated.  
.
When parking, set the heater and air condi-  
tioner controls to turn off air recirculation to  
allow fresh air into the passenger compart-  
ment. This should help reduce odors inside  
the vehicle.  
1
2
The sensors  
and  
, located on the instrument  
*
*
panel, help maintain a constant temperature. Do not  
put anything on or around the sensors.  
4-10 Heater and air conditioner, and audio system  
A/C (Air Conditioner) operation:  
MANUAL AIR CONDITIONER  
Push the “A/C” button to turn on or off the air  
conditioner. When the air conditioner is on, the “A/C”  
indicator light on the button illuminates.  
Temperature control:  
Turn the temperature control dial to set the desired  
temperature. Turn the dial between the middle and the  
right position to select the hot temperature. Turn the  
dial between the middle and the left position to select  
the cool temperature.  
Heater operation  
SAA3432  
Heating:  
1.  
Air intake lever (Outside air circulation “  
”
Air flow control:  
This mode is used to direct heated air to the foot  
outlets.  
/Air recirculation “  
Air flow control dial  
Fan speed control “  
”)  
Turn the air flow control dial to change the air flow  
mode.  
2.  
3.  
4.  
5.  
6.  
1. Move the air intake lever to the “  
normal heating.  
” position for  
” dial  
—
Air flows from the center and side  
ventilators.  
“A/C” (Air Conditioner) button  
Temperature control dial  
2. Turn the air flow control dial to the “  
” position.  
—
Air flows from the center and side  
ventilators and foot outlets.  
3. Turn the fan speed control “  
desired position.  
” dial to the  
Rear window defogger  
“Defogger switch” (P.2-28).)  
To turn off the heater and air conditioner, turn the fan  
“
”
button (See  
—
—
Air flows mainly from the foot outlets.  
4. Turn the temperature control dial to the desired  
position between the middle and the hot (right)  
position.  
Air flows from the defogger and foot  
outlets.  
speed control “  
” dial to the “OFF” (0) position.  
—
Air flows mainly from the defogger outlets.  
Controls  
Ventilation:  
Fan speed control:  
Outside air circulation:  
This mode directs outside air to the side and center  
ventilators.  
Turn the fan speed control “  
increase the fan speed.  
” dial clockwise to  
” dial counterclock-  
Move the air intake lever to the “  
flow is drawn from outside the vehicle.  
” position. The air  
1. Move the air intake lever to the “  
2. Turn the air flow control dial to the “  
” position.  
” position.  
Turn the fan speed control “  
Air recirculation:  
wise to decrease the fan speed.  
Move the air intake lever to the “  
flow is circulated inside the vehicle.  
” position. The air  
3. Turn the fan speed control “  
desired position.  
” dial to the  
4. Turn the temperature control dial to the desired  
position.  
Heater and air conditioner, and audio system 4-11  
Defrosting or defogging:  
Heating and defogging:  
Dehumidified heating:  
This mode directs the air to the defogger outlets to  
defrost/defog the windows.  
This mode heats the interior and defogs the windows.  
This mode is used to heat and dehumidify the air.  
1. Move the air intake lever to the “  
2. Turn the air flow control dial to the “  
” position.  
” position.  
1. Move the air intake lever to the “  
2. Turn the air flow control dial to the “  
” position.  
” position.  
1. Move the air intake lever to the “  
2. Turn the air flow control dial to the “  
” position.  
” position.  
3. Turn the fan speed control “  
desired position.  
” dial to the  
3. Turn the fan speed control “  
desired position.  
” dial to the  
3. Turn the fan speed control “  
desired position.  
” dial to the  
4. Turn the temperature control dial to the maximum  
hot (right) position.  
4. Push the “A/C” button on. (The “A/C” indicator  
light will illuminate.)  
4. Turn the temperature control dial to the desired  
position between the middle and the hot (right)  
position.  
5. Turn the temperature control dial to the desired  
position between the middle and the hot (right)  
position.  
Air conditioner operation  
The air conditioner system should be operated for  
approximately 10 minutes at least once a month. This  
helps prevent damage to the air conditioner system  
due to the lack of lubrication.  
.
To remove frost from the outside surface of the  
windshield quickly, turn the temperature control  
dial to the maximum hot position and the fan  
Dehumidified defogging:  
This mode is used to defog the windows and  
dehumidify the air.  
speed control “  
” dial to maximum position.  
Cooling:  
.
If it is difficult to defog the windshield, turn the  
“A/C” button on.  
1. Move the air intake lever to the “  
2. Turn the air flow control dial to the “  
” position.  
” position.  
This mode is used to cool and dehumidify the air.  
Bi-level heating:  
1. Move the air intake lever to the “  
2. Turn the air flow control dial to the “  
” position.  
” position.  
3. Turn the fan speed control “  
desired position.  
” dial to the  
This mode directs cool air from the side and center  
ventilators and warm air from the foot outlets. When  
the temperature control dial is turned to the maximum  
hot or cool position, the air between the ventilators and  
the foot outlets is the same temperature.  
3. Turn the fan speed control “  
desired position.  
” dial to the  
4. Push the “A/C” button on. (The “A/C” indicator  
light will illuminate.)  
4. Push the “A/C” button on. (The “A/C” indicator  
light will illuminate.)  
5. Turn the temperature control dial to the desired  
position.  
1. Move the air intake lever to the “  
2. Turn the air flow control dial to the “  
” position.  
” position.  
5. Turn the temperature control dial to the desired  
position between the middle and the cool (left)  
position.  
3. Turn the fan speed control “  
desired position.  
” dial to the  
A visible mist may be seen coming from the ventilators  
in hot, humid conditions as the air is cooled rapidly.  
This does not indicate a malfunction.  
4. Turn the temperature control dial to the desired  
position.  
4-12 Heater and air conditioner, and audio system  
AUTOMATIC AIR CONDITIONER (models with Integrated Control System)  
Selecting Climate mode  
SAA3339  
While the Climate mode is indicated on the display  
screen, the room temperature and fan speed, and  
automatic mode or manual mode, are indicated by the  
full screen. To indicate the climate mode, push the  
“CLIMATE” button.  
For details of the drive mode functions, see “Integrated  
control system” (P.5-15) or “Integrated control system”  
(P.2-18).  
Automatic operation (AUTO)  
The AUTO mode may be used year-round as the  
system automatically controls constant temperature, air  
flow distribution and fan speed after the desired  
temperature is set manually.  
SAA3335  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
“AUTO” button/Temperature control dial  
“OFF” button  
9.  
Air intake button (Outside air circulation  
”/Air recirculation “ ”)  
10. Rear window defogger  
“Defogger switch” (P.2-28).)  
To turn off the heater and air conditioner, push the  
“CLIMATE” button to change to the climate control  
mode, then push the “OFF” button.  
“
“
”
button (See  
“A/C” (Air Conditioner) button  
“CLIMATE” (Climate mode select) button  
Display screen  
Cooling and dehumidified heating:  
1. Push the “AUTO” button.  
Air flow control buttons  
2. Turn the temperature control dial to set the desired  
temperature.  
Fan speed control “  
Front defogger “  
” dial  
” button  
A visible mist may be seen coming from the ventilators  
in hot, humid conditions as the air is cooled rapidly.  
Heater and air conditioner, and audio system 4-13  
This does not indicate a malfunction.  
Outside air circulation:  
Manual operation  
Push the air intake button to draw the air flow from  
The manual mode can be used to control the heater  
and air conditioner to your desired settings.  
Heating (A/C off):  
outside the vehicle. (The indicator light on the “  
side will illuminate.)  
”
1. Push the “AUTO” button.  
To turn off the heater and air conditioner, push the  
“OFF” button.  
2. If the “A/C” indicator light illuminates, push the  
“A/C” button.  
Air recirculation:  
Push the air intake button to circulate the air flow inside  
.
While the “Drive Mode” is indicated on the screen,  
adjusting the amount of airflow and controlling the  
airflow direction are not possible. Push the  
“CLIMATE” button to change to the “Climate  
Control mode”.  
3. Turn the temperature control dial to set the desired  
temperature.  
the vehicle. (The indicator light on the “  
illuminate.)  
” side will  
.
Do not set the temperature lower than the outside  
air temperature. Doing so may cause the tem-  
perature to not be controlled properly.  
Automatic air intake control:  
Push the air intake button for approximately 2 seconds.  
The indicator lights (both air recirculation and outside  
air circulation sides) will blink twice, and then the  
intake air will be controlled automatically. The auto-  
matic control is set between the outside air circulation  
Fan speed control:  
.
If the windows fog up, use dehumidified heating  
instead of the A/C off heating.  
Turn the “  
” fan speed control dial clockwise (+) or  
counterclockwise (−) to manually control the fan  
speed.  
Dehumidified defrosting/defogging:  
1. Push the front defogger  
” indicator light will illuminate.)  
“
”
button. (The  
“
”
and air recirculation  
“
”
modes (the  
Push the “AUTO” button to change the fan speed to  
the automatic mode.  
“
indicator light of the side that is operating will  
illuminate).  
2. Turn the temperature control dial to set the desired  
temperature.  
Air flow control:  
Setting climate ECO  
When the Drive Mode is displayed, you can set  
CLIMATE ECO ON or OFF.  
Push the corresponding air flow control button to set  
the air outlet to the preferred mode.  
.
To remove frost from the outside surface of the  
windshield quickly, set the temperature to a high  
temperature and the fan speed to the maximum  
level.  
—
Air flows from the center and side  
ventilators.  
(See “ECO drive mode” (P.5-17).)  
—
Air flows from the center and side  
ventilators and foot outlets.  
.
.
After the windshield is cleared, push the front  
SERVICING AIR CONDITIONER  
defogger “  
” button again. (The indicator light  
will turn off.)  
—
—
Air flows mainly from the foot outlets  
WARNING:  
When the front defogger “  
” button is pushed,  
Air flows from the defogger outlets and  
foot outlets.  
The air conditioner system contains refrigerant  
under high pressure. To avoid personal injury,  
any air conditioner service should be done only  
by an experienced technician with the proper  
equipment.  
the air conditioner will automatically turn on to  
defog the windshield. The air recirculation mode  
will automatically turn off. The outside air circula-  
Temperature control:  
Turn the temperature control dial to set the desired  
temperature.  
tion mode “  
” will be selected to improve the  
defogging performance.  
The air conditioner system in your vehicle is charged  
with a refrigerant designed with the environment in  
mind.  
This refrigerant will not harm the earth’s ozone  
4-14 Heater and air conditioner, and audio system  
AUDIO SYSTEM (if equipped)  
layer. However, it may contribute in a small part to  
global warming.  
.
The following CDs may not work properly.  
— Copy control compact discs (CCCD)  
— Recordable compact discs (CD-R)  
— Rewritable compact discs (CD-RW)  
AUDIO OPERATION PRECAUTIONS  
WARNING:  
Special charging equipment and lubricant are required  
when servicing your vehicle’s air conditioner. Using  
improper refrigerants or lubricants will cause severe  
damage to the air conditioner system. (See “Air  
conditioner system refrigerant and lubricant” (P.9-6).)  
Do not adjust the audio system while driving so  
that full attention may be given to vehicle  
operation.  
The audio system operates when the ignition switch is  
in the “ACC” or “ON” position. If you want to listen to  
the radio or CD while the engine is not running, turn  
the ignition switch to the “ACC” position. Do not use  
for an extended period of time with the engine  
stopped.  
A
NISSAN dealer will be able to service your  
environmentally friendly air conditioner system.  
Air conditioner filter  
The air conditioner system is equipped with an air  
conditioner filter which collects dirt, dust, etc. To make  
sure the air conditioner heats defogs, and ventilates  
efficiently, replace the filter in accordance with the  
specified maintenance intervals listed in the separate  
maintenance booklet. To replace the filter, contact a  
NISSAN dealer.  
Radio  
.
Radio reception is affected by station signal  
strength, distance from radio transmitter, build-  
ings, bridges, mountains and other external  
influences. Intermittent changes in reception  
quality normally are caused by these external  
influences.  
The filter should be replaced if the air flow decreases  
significantly or if windows fog up easily when operating  
the heater or air conditioner.  
.
Using a cellular phone in or near the vehicle may  
influence radio reception quality.  
Compact Disc (CD) player  
.
During cold weather or rainy days, the player may  
malfunction due to the humidity. If this occurs,  
remove the CD from CD player and dehumidify or  
ventilate the player completely.  
SAA0480  
.
Do not use the following CDs as they may cause  
the CD player to malfunction.  
.
.
The player may skip while driving on rough roads.  
The CD player sometimes may not function when  
the passenger compartment temperature is ex-  
tremely high. Lower the temperature before use.  
— 8 cm (3.1 in) discs  
— CDs that are not round  
— CDs with a paper label  
.
.
Do not expose the CD to direct sunlight.  
CDs that are of poor quality, or are dirty,  
scratched, covered with fingerprints, or that have  
pin holes may not work properly.  
— CDs that are warped, scratched or have  
unusual edges.  
Heater and air conditioner, and audio system 4-15  
— CD lens cleaner discs  
correct direction before inserting the de-  
vice.).  
.
An iPod nano (1st Generation) may remain in fast  
forward or rewind mode if it is connected during a  
seek operation. In this case, please manually reset  
the iPod.  
.
.
This audio system can only play prerecorded CDs.  
It has no capabilities to record or burn CDs.  
.
.
Do not grab the USB port cover (if equipped)  
when pulling the USB device out of the port.  
This could damage the port and the cover.  
If the CD cannot be played, one of the following  
messages will be displayed.  
.
.
An iPod nano (2nd Generation) will continue to  
fast-forward or rewind if it is disconnected during  
a seek operation.  
Do not leave the USB cable in a place where  
it can be pulled unintentionally. Pulling the  
cable may damage the port.  
Error CD:  
.
Confirm that the CD is inserted correctly (the label  
side is facing up, etc.).  
An incorrect song title may appear when the Play  
Mode is changed while using an iPod nano (2nd  
Generation)  
.
Confirm that the CD is not bent or warped and it is  
free of scratches.  
The vehicle is not equipped with a USB device. USB  
devices should be purchased separately as necessary.  
.
.
Audiobooks may not play in the same order as  
they appear on an iPod.  
.
.
Confirm that the disc is a CD and not a DVD.  
Confirm that the disc contains audio files.  
This system cannot be used to format USB devices. To  
format a USB device, use a personal computer.  
Large video files cause slow responses in an iPod.  
The vehicle center display may momentarily black  
out, but will soon recover.  
In some states/area, the USB device for the front seats  
plays only sound without images for regulatory  
reasons, even when the vehicle is parked.  
Eject CD:  
This is a malfunction due to the temperature inside the  
player is too high. Remove the CD by pushing the  
EJECT button, and after a short time reinsert the CD.  
The CD can be played when the temperature of the  
player returns to normal.  
.
If an iPod automatically selects large video files  
while in the shuffle mode, the vehicle center  
display may momentarily black out, but will soon  
recover.  
This system supports various USB memory devices,  
USB hard drives and iPod players. Some USB devices  
may not be supported by this system.  
Bluetooth® Audio player  
.
Partitioned USB devices may not be played  
correctly.  
USB (Universal Serial Bus) Connection Port  
.
Some Bluetooth® audio devices may not be used  
with this system. For detailed information about  
Bluetooth® audio devices that are available for use  
with this system, contact a NISSAN dealer.  
.
Some characters used in other languages (Chi-  
nese, Japanese, etc.) are not displayed properly  
on display. Using English language characters  
with a USB device is recommended.  
WARNING:  
Do not connect, disconnect or operate the USB  
device while driving. Doing so can be a distrac-  
tion. If distracted you could lose control of your  
vehicle and cause an accident or serious injury.  
.
.
Before using a Bluetooth® audio system, the initial  
registration process for the audio device is  
necessary.  
Operation of the Bluetooth® audio system may  
vary depending on the audio device that is  
connected. Confirm the operation procedure  
before use.  
General notes for USB use:  
Refer to your device manufacturer’s owner information  
regarding the proper use and care of the device.  
CAUTION:  
Notes for iPod use:  
.
Do not force the USB device into the USB  
port. Inserting the USB device tilted or up-  
side-down into the port may damage the  
port. Make sure that the USB device is  
connected correctly into the USB port (Some  
iPod is a trademark of Apple Inc., registered in the U.S.  
and other countries.  
.
The playback of Bluetooth® audio will be paused  
under the following conditions. The playback will  
be resumed after the following conditions are  
completed.  
.
Improperly plugging in the iPod may cause a  
checkmark to be displayed on and off (flickering).  
Always make sure that the iPod is connected  
properly.  
USB devices come with a  
mark as a  
guide. Make sure that the mark is facing the  
4-16 Heater and air conditioner, and audio system  
— while using a hands-free phone  
greater file compression than the MP3 codec,  
enabling storage of more digital audio tracks in the  
same amount of space when compared to MP3s  
at the same level of quality.  
Playback order:  
— while checking a connection with a cell phone  
.
The in-vehicle antenna for Bluetooth® commu-  
nication is built in the system. Do not place the  
Bluetooth® audio device in an area surrounded by  
metal, far away from the system or in a narrow  
space where the device closely contacts the body  
or the seat. Otherwise, sound degradation or  
connection interference may occur.  
.
.
AAC (if equipped) — Advanced Audio Coding  
(AAC) is a compressed audio format. AAC offers  
greater file compression than MP3 and enables  
music file creation and storage at the same quality  
as MP3.  
Bit rate — Bit rate denotes the number of bits per  
second used by a digital music files. The size and  
.
.
While a Bluetooth® audio device is connected  
through the Bluetooth® wireless connection, the  
battery power of the device may discharge quicker  
than usual.  
This system is compatible with the Bluetooth® AV  
profile (A2DP and AVRCP).  
quality of  
a
compressed digital audio file is  
determined by the bit rate used when encoding  
the file.  
.
.
Sampling frequency — The rate at which the  
samples of a signal are converted from analog to  
digital (A/D conversion) per second.  
Bluetooth® is a trademark  
owned by Bluetooth SIG, Inc.  
and licensed to Visteon Cor-  
poration and Bosch.  
Multisession — Multisession is one of the methods  
for writing data to media. Writing data once to the  
media is called a single session, and writing more  
than once is called a multisession.  
Compact Disc (CD)/USB device with MP3/  
WMA/AAC  
.
ID3/WMA Tag — The ID3/WMA tag is the part of  
the encoded MP3 or WMA file that contains  
information about the digital music file such as  
song title, artist, album title, encoding bit rate,  
track time duration, etc. ID3 tag information is  
displayed on the Album/Artist/Song title line on  
the display.  
Terms:  
.
MP3 — MP3 is short for Moving Pictures Experts  
Group Audio Layer 3. MP3 is the most well known  
compressed digital audio file format. This format  
allows for near “CD quality” sound, but at a  
fraction of the size of normal audio files. MP3  
conversion of an audio track from CD can reduce  
the file size by approximately 10:1 ratio (Sampling:  
44.1 kHz, Bit rate: 128 kbps) with virtually no  
perceptible loss in quality. MP3 compression  
removes the redundant and irrelevant parts of a  
sound signal that the human ear doesn’t hear.  
SAA2494  
Music playback order of the CD with MP3 or WMA is  
as illustrated above.  
* Windows® and Windows Media® are registered  
trademarks and/or trademarks of Microsoft Corpora-  
tion in the United States of America and/or other  
countries.  
.
.
.
The names of folders not containing MP3/WMA  
files are not shown in the display.  
If there is a file in the top level of the disc, “Root” is  
displayed.  
The playback order is the order in which the files  
were written by the writing software, so the files  
might not be played in the desired order.  
.
WMA — Windows Media Audio (WMA) is a  
compressed audio format created by Microsoft as  
an alternative to MP3. The WMA codec offers  
Heater and air conditioner, and audio system 4-17  
Specification chart (for Type A audio):  
Supported media  
CD, CD-R, CD-RW, USB2.0  
ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet  
ISO9660 Level 3 (packet writing) is not supported.  
Files saved using the Live File System component (on a Windows Vista-based computer)  
are not supported.  
Supported file systems  
USB memory: FAT16, FAT32  
MPEG1, MPEG2, MPEG2.5  
Version  
32kHz - 44.1 kHz - 48kHz (model with Bluetooth® function)  
MP3  
Sampling frequency  
8 kHz - 48 kHz (model without Bluetooth® function)  
Bit rate  
32 kbps - 320 kbps VBR*4  
WMA7, WMA8, WMA9  
32 kHz - 48 kHz  
Version  
Supported versions*1  
WMA*2  
AAC  
Sampling frequency  
Bit rate  
48 kbps - 320 kbps, VBR*4  
MPEG-4 AAC  
Version  
Sampling frequency  
Bit rate  
8 kHz - 48 kHz  
32 kbps - 192 kbps, VBR*4  
ID tag VER1.0, VER1.1, VER2.2, VER2.3 (MP3 only) (model with Bluetooth® function)  
ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only) (model without Bluetooth®  
function)  
Tag information (Song title and Artist name)  
WMA tag (WMA only)  
Folder levels: 8, Folders: 255 (including route folder), Files: 512 (Max. 255 files for one  
folder)  
CD, CD-R, CD-RW  
USB  
Folder levels  
Folder levels: 8, Folders 255, Files: 2500 (Max. 255 files for one folder)  
Memory size: 4GB  
01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE  
(UTF-16 Non-BOM Big Endian), 05: UNICODE (UTF-8), 06: UNICODE (Non-UTF-16  
BOM Little Endian), 07:SHIFT-JIS  
Displayable character codes*3  
*1  
*2  
*3  
*4  
Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.  
Protected WMA files (DRM) cannot be played.  
Available codes depend on what kind of media, versions and information are going to be displayed.  
When VBR files are played, the playback time may not be displayed correctly. WMA7 and WMA8 are not applied to VBR.  
4-18 Heater and air conditioner, and audio system  
Specification chart (for Type B audio):  
Supported media  
CD, CD-R, CD-RW, USB2.0  
CD, CD-R, CD-RW: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet  
* ISO9660 Level 3 (packet writing) is not supported.  
* Files saved using the Live File System component (on a Windows Vista-based computer) are  
not supported.  
Supported file systems  
USB memory: FAT16, FAT32  
Version  
MPEG1 Audio Layer 3  
MP3  
Supported versions*1  
WMA*2  
Sampling frequency  
Bit rate  
32 kHz - 48 kHz  
32 kbps - 320 kbps, VBR*4  
Version  
WMA7, WMA8, WMA9  
Sampling frequency  
Bit rate  
32 kHz - 48 kHz  
32 kbps - 192 kbps, VBR4, 32 kbps - 320 kbps (WMA9 only)  
ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only)  
WMA tag (WMA only)  
Tag information (Song title and Artist name)  
CD, CD-R, CD-RW  
USB  
Folder levels: 8, Folders: 255, Files: 999 (Max. 255 files for one folder)  
Folder levels  
Folder levels: 8, Folders 255, Files: 2500 (Max. 255 files for one folder)  
Memory size: 4GB  
01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE (UTF-16  
Non-BOM Big Endian), 05: UNICODE (UTF-8)  
Displayable character codes*3  
*1  
*2  
*3  
*4  
Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.  
Protected WMA files (DRM) cannot be played.  
Available codes depend on what kind of media, versions and information are going to be displayed.  
When VBR files are played, the playback time may not be displayed correctly.  
Heater and air conditioner, and audio system 4-19  
Specification chart (for Type C audio):  
Supported media  
Supported file systems  
Version  
CD, CD-R, CD-RW, USB2.0  
ISO9660 LEVEL 1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet  
*ISO9660 LEVEL 3 (packet writing) is not supported.  
MPEG1, MPEG2, MPEG2.5  
MP3  
Sampling frequency  
Bit rate  
8 kHz - 48 kHz  
8 kbps - 320 kbps, VBR  
Supported  
versions*1  
Version  
WMA7, WMA8, WMA9  
WMA*2 Sampling frequency  
Bit rate  
32 kHz - 48 kHz  
48 kbps - 192 kbps, VBR  
Tag information  
Folder levels  
ID3 tag VER1.0, VER1.1, VER2.2, VER2.3 (MP3 only)  
Folder levels: 8, Max folders: 255 (including root folder), Files: 512 (Max. 255 files for one folder)  
01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE (UTF-16 Non-BOM Big  
Endian), 05: UNICODE (UTF-8), 06: UNICODE (Non-UTF-16 BOM Little Endian)  
Displayable character codes*2  
*1  
*2  
Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.  
Available codes depend on what kind of media, versions and information are going to be displayed.  
4-20 Heater and air conditioner, and audio system  
Troubleshooting guide:  
Symptom  
Cause and Countermeasure  
Check if the disc was inserted correctly.  
Check if the disc is scratched or dirty.  
Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player.  
If there is a temperature increase error, the CD player will play correctly after it returns to the normal temperature.  
If there is a mixture of music CD files (CD-DA data) and MP3/WMA files on a CD, only the music CD files (CD-DA data) will be  
played.  
Cannot play  
Files with extensions other than “.MP3”, “.WMA”, “.mp3” or “.wma” cannot be played. In addition, the character codes and number of  
characters for folder names and file names should be in compliance with the specifications.  
Check if the finalization process, such as session close and disc close, is done for the disc.  
Check if the disc is protected by copyright.  
Check if the disc is scratched or dirty.  
Poor sound quality  
Bit rate may be too low.  
It takes a relatively long time before If there are many folders or file levels on the MP3/WMA disc, or if it is a multisession disc, some time may be required before the  
the music starts playing.  
music starts playing.  
The writing software and hardware combination might not match, or the writing speed, writing depth, writing width, etc., might not  
match the specifications. Try using the slowest writing speed.  
Music cuts off or skips  
Skipping with high bit rate files  
Skipping may occur with large quantities of data, such as for high bit rate data.  
Move immediately to the next song When a non-MP3/WMA file has been given an extension of “.MP3”, “.WMA”, .“mp3” or “.wma”, or when play is prohibited by  
when playing  
copyright protection, there will be approximately 5 seconds of no sound and then the player will skip to the next song.  
The playback order is the order in which the files were written by the writing software. Therefore, the files might not play in the desired  
order.  
Songs do not play back in the  
desired order  
Heater and air conditioner, and audio system 4-21  
ANTENNA  
SAA2102  
Type B  
Removing antenna  
You can remove the antenna if necessary.  
Hold the bottom of the antenna and remove it by  
turning it counterclockwise.  
To install the antenna, turn the antenna clockwise and  
tighten.  
CAUTION:  
.
Be sure to fold down (for Type A) or remove  
the antenna before the vehicle enters  
garage with a low ceiling.  
a
SAA1834  
.
.
Be sure that the antenna is removed before  
the vehicle enters an automatic car wash.  
Type A  
The angle of the antenna can be changed for Type A  
antenna.  
Be sure that the antenna is folded down (for  
Type A) or removed before covering the  
vehicle with a cover.  
4-22 Heater and air conditioner, and audio system  
FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (Type A)  
Audio main operation  
The audio system operates when the ignition switch is  
in the “ACC” or “ON” position.  
Power button/VOL (Volume) control  
knob:  
Power ON/OFF:  
To turn on the audio system, push the Power button.  
.
The system will turn on in the mode that was used  
immediately before the system was turned off.  
.
If the system was turned on with the CD ejected  
and the devices disconnected, the radio will turn  
on.  
To turn off the audio system, push the Power button.  
Volume control:  
To control the volume, turn the VOL (Volume) control  
knob.  
Turn the knob clockwise to make the sound louder.  
Turn the knob counterclockwise to make the sound  
quieter.  
SETUP button:  
JVH0986X  
To configure Audio, Clock, Radio or Language, perform  
the following procedure.  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
DISP (Display) button  
RADIO button  
9.  
CD eject button  
1. Push the  
button.  
10. MEDIA button  
11. Phone button  
2. Turn the MENU knob clockwise or counterclock-  
wise, the display will appear in the following order.  
Day/Night button  
MIX button  
12. Power button /VOL (Volume) control knob  
13. RPT (repeat) button  
Audio Setting  
Language ? Audio Setting  
3. Push the ENTER button to select the item.  
?
Clock  
?
Radio Setting  
?
SEEK button/Rewind button  
SEEK button/Fast forward button  
SETUP button  
14. Radio memory buttons  
15. A-Z button  
Back button  
16. ENTER button/MENU knob  
Heater and air conditioner, and audio system 4-23  
Audio adjustments:  
Adjusting the setting to 0 (zero) turns off the speed  
volume feature. Increasing the speed volume setting  
results in the audio volume increasing more rapidly with  
vehicle speed. Once chosen, push ENTER button to  
save the setting.  
Format:  
Push the  
button and then select “Audio Setting”.  
Switch the clock display between 24-hour mode and  
12-hour clock mode.  
Turn the MENU knob, and the mode will change as  
follows.  
Radio setting:  
Sound ? Aux In ? Speed Vol ? Bass Boost ? Audio  
Default  
Push the  
and then select “Radio”.  
button to enter the setup menu screen  
Bass Boost :  
Set the bass volume between on or off. If set in the  
“ON” position, bass sound is emphasized.  
Push the ENTER button to select the setting you want  
to change. Turn the MENU knob to adjust the selected  
item.  
This function is used to select the FM frequency band.  
Language setting:  
Audio Default :  
Push the  
and then select “Language”.  
button to enter the setup menu screen  
Select this item to reset the audio settings to the  
default value.  
Sound:  
Adjust Bass, Treble, Balance and Fade. Turn the  
MENU knob and then push the ENTER button to select  
the setting item. Turn the MENU knob to adjust the  
setting.  
Select the appropriate language and push the ENTER  
button. Upon completion, the screen will automatically  
adapt the language setting.  
Clock setting:  
Push the  
button to enter the setup menu screen  
and then select “Clock”.  
.
.
.
Bass:  
Turn the MENU knob, and the mode will change as  
follows.  
Day/Night button:  
Enhances or attenuates the bass response sound.  
Push the  
button to switch the display brightness  
Treble:  
Set Time ? ON/OFF ? Format  
Set Time:  
between the daytime and nighttime modes.  
Enhances or attenuates the treble.  
Balance:  
Select “Set Time” and then adjust the clock as follows.  
Phone button:  
Adjusts the balance of the volume between the left  
and right speakers.  
The hour display will start flashing. Turn the MENU  
knob to adjust the hour and push the ENTER button.  
The minute display will start flashing. Turn the MENU  
knob to adjust the minute and push the ENTER button  
to finish the clock adjustment.  
For operation on how to use  
“Bluetooth® Hands-Free Phone System (Type A)”  
(P.4-42).  
button, see  
.
Fade:  
Adjusts the balance of the volume between the  
front and rear speakers.  
MEDIA button:  
Aux In:  
ON/OFF:  
Adjusts the volume output from the auxiliary source.  
Speed Vol (Speed Volume) :  
Push the  
it is connected.  
button to play a compatible device when  
Set the clock display between on or off when the audio  
unit is turned off. If set in the “ON” position, the clock  
will be displayed when the audio unit is turned off  
either by pushing the Power button or when the  
ignition switch is placed in the “OFF” position.  
Each time the  
will change as follows.  
button is pushed, the audio source  
Set the audio system to automatically adjust the  
volume level in relation to vehicle speed.  
CD ? USB/iPod ? Bluetooth audio ? AUX  
A source that is not available will be skipped.  
This mode controls the volume output from the  
speakers automatically in relation to vehicle speed.  
When “Speed Vol” is displayed, turn the MENU knob  
clockwise or anticlockwise to adjust the volume level.  
4-24 Heater and air conditioner, and audio system  
To store the station frequency manually:  
.
An error notification message will be dis-  
played when inserting an incompatible disc  
type (e.g., DVD), or if the player cannot read  
the CD. Eject the disc and insert another  
disc.  
Radio operation  
The audio system operates when the ignition switch is  
in the “ACC” or “ON” position.  
1. Tune to the desired broadcasting station fre-  
quency by using the  
buttons.  
2. Push and hold a radio memory button  
to  
RADIO button:  
until a beep sounds. (The radio mutes when  
the memory button is pushed.)  
When the  
button is pushed while the audio  
MEDIA button:  
3. The channel indicator will display and the radio  
mute disengages, indicating that the memory is  
stored properly.  
system is off, the audio system will turn on and the  
radio will turn on.  
To change to the CD mode, push the  
a CD inserted until the CD mode is selected.  
button with  
When the  
button is pushed while another audio  
4. Perform steps 1 - 3 for all other memory buttons.  
List view:  
source is playing, the other audio source will turn off  
and the radio will turn on.  
While the track is being played, push either the ENTER  
button or the  
in the list. To select a track from the list, or a track to  
start listening to, turn the MENU knob and then push  
the ENTER button.  
If the battery cable is disconnected, or if the audio fuse  
blows, the radio memory will be erased. In such a case,  
reset the desired stations.  
button to display the available track  
To change the radio bands, push the  
the desired band appears.  
button until  
button to  
FM 1 ? FM 2 ? AM ? FM 1  
CD player operation  
The audio system operates when the ignition switch is  
in the “ACC” or “ON” position.  
During FM reception, push and hold the  
update FM list.  
Quick search:  
In the list view mode, a quick search can be performed  
to find a track from the list. Push the A-Z button, turn  
the MENU knob to the first alphabetic letter of the song  
title, and then push the ENTER button. When found, a  
list of the available songs will be displayed. Select, and  
push the ENTER button to play the preferred track.  
Turn the MENU knob to select a station from the FM  
list.  
Loading:  
Insert a CD into the slot with the label side facing up.  
The CD will be guided automatically into the slot and  
will start playing. After loading the CD, the number of  
tracks and the play time will appear on the display.  
SEEK buttons:  
When adjusting the broadcasting station frequency  
manually, push the  
frequency is achieved.  
or  
button until the desired  
CAUTION:  
Fast forward/Rewind buttons:  
Do not force the CD into the slot. This could  
damage the player.  
When adjusting the broadcasting station frequency  
automatically, push and hold the or button.  
When the system detects a broadcasting station, it will  
stop at the station.  
Push and hold the  
or rewind through the track. When the button is  
released, the track will play at normal playing speed.  
or  
button to fast forward  
NOTE:  
Track up/down:  
.
The CD player accepts normal audio CDs or  
CDs containing MP3/WMA files.  
to  
Radio memory buttons:  
By pushing the  
skip forward to the next track or backward to the  
beginning of the current track. Push the or  
button more than once to skip through the tracks.  
or  
button once, the track will  
During radio reception, pushing the radio memory  
button will select the stored radio station.  
.
The audio unit will automatically detect if a  
CD containing MP3/WMA files is inserted,  
and “MP3CD” will be indicated.  
The audio system can store up to 12 FM station  
frequencies (6 in each of FM 1, FM 2) and 6 AM  
station frequencies.  
Heater and air conditioner, and audio system 4-25  
Folder browsing:  
device into the connector. The USB memory device  
will be activated automatically.  
DISP button:  
If the recorded media contains folders with music files,  
While a CD with title information is being played, the  
title of the played track is displayed.  
pushing the  
each folder in sequence.  
or  
button will play the tracks of  
If the system has been turned off while the USB  
memory device was playing, pushing the Power button  
will start the USB memory device.  
When the  
button is pushed repeatedly while a CD  
To select a preferred folder:  
with MP3/WMA/AAC is playing, further information  
about the track can be displayed along with the track  
title as follows.  
The following operations are identical to the audio main  
operation of the Compact Disc (CD) operation. For  
details, see “CD player operation” (P.4-25).  
1. Push the ENTER button or the  
button and a  
list of tracks in the current folder is displayed.  
2. Push the  
button.  
Track time ? Artist ? Album ? Track time  
.
.
.
.
.
.
List view  
3. Turn the MENU knob for the preferred folder.  
Quick search  
Track details:  
4. Push the ENTER button to access the folder. Push  
the ENTER button again to start playing the first  
track or turn the MENU knob, and push the  
ENTER button to select another track.  
Pushing and holding the  
display into a detailed overview. Push the  
button will turn the  
button  
MIX (Random play)  
RPT (Repeat track)  
Folder browsing  
to return to the display for the main display mode.  
If the current selected folder contains sub folders, push  
the ENTER button, and a new screen with a list of sub  
folders will be displayed. Turn the MENU knob for the  
sub folder and then push the ENTER button to select.  
Select the root folder item when songs are recorded  
additionally in the root folder.  
CD Eject button:  
MEDIA button:  
When the  
button is pushed while a CD is loaded,  
the CD will be ejected.  
To change to the USB mode, push the  
button  
with a USB connected until the USB mode is selected.  
When the  
button is pushed twice, the CD will be  
ejected further, and the CD can be removed with ease.  
To return to the previous folder screen, push the  
button.  
DISP button:  
When the ignition switch is in the “OFF” or “LOCK”  
position it is possible to eject the CD currently being  
played. However the audio unit will not be activated.  
While a track with recorded music information tags  
(ID3-tags) is being played, the title of the played track  
is displayed. If the tags are not provided then a  
notification message is displayed.  
RPT button:  
If a CD is ejected by pushing the  
button, and it is  
not taken out from the loading slot within 8 seconds,  
the CD will automatically be reloaded to the slot in  
order to protect the CD.  
Push the  
button and the current track will be  
played continuously.  
When the  
button is pushed continuously, further  
information about the track can be displayed along  
with the track title as follows.  
MIX button:  
USB device operation  
Track time ? Artist ? Album ? Track time  
Push the  
button and all the tracks will be played in  
USB main operation:  
a random order.  
Track details:  
The audio system operates when the ignition switch is  
placed in the “ON” or “ACC” position.  
Pushing and holding the  
display into a detailed overview. Push the  
to return to the display for the main display mode.  
button will turn the  
button  
The USB port is located on the lower part of the  
instrument panel. See “USB (Universal Serial Bus)  
Connection Port” (P.4-40). Connect a USB memory  
4-26 Heater and air conditioner, and audio system  
iPod main operation:  
display into a detailed overview. To return to the main  
display, push the button.  
iPod player operation  
Interface:  
Connecting iPod:  
Bluetooth® audio player operation  
The interface for iPod operation shown on the audio  
system display is similar to the iPod interface. Use the  
ENTER button/MENU knob to play a track on the iPod.  
The USB port is located on the lower part of the  
instrument panel. See “USB (Universal Serial Bus)  
Connection Port” (P.4-40).  
Regulatory information:  
Bluetooth® is a trademark owned  
by Bluetooth SIG, Inc. and li-  
censed to Visteon Corporation.  
The following items can be chosen from the menu list  
screen.  
When the iPod is connected to the vehicle, the iPod  
music library can only be operated by the vehicle audio  
controls.  
.
.
.
.
Playlists  
Artist  
CE statement:  
* iPod and iPhone are a trademark of Apple Inc.,  
registered in the U.S. and other countries.  
Hereby Visteon Corp. declares that this system is in  
compliance with the essential requirements and other  
relevant provisions of Directive 1999/5/EC.  
Albums  
Songs  
Compatibility:  
For further information about each item, see the iPod  
owner’s manual.  
The system unit shall be compatible with all devices  
(past and future) supporting Apple Accessory Protocol  
on USB link.  
The following operations are identical to the audio main  
operation of the Compact Disc (CD) operation. For  
details, see “CD player operation” (P.4-25).  
It includes (and not limited to):  
NOTE:  
.
.
.
.
.
.
iPod Generation 5 devices  
The audio system only supports Bluetooth®  
devices with AVRCP (Audio Video Remote Con-  
trol Profile) version 1.3, or 1.0 or earlier.  
.
.
.
.
.
.
List view  
iPod Classic I and II (Generation 6 and 7)  
iTouch Generaion OS 1, 2, 3, 4 and next  
iPhone Generation OS 1, 2, 3, 4 and next  
iPod Nano (1G, 2G, 3G)  
Quick search  
Bluetooth® audio player main operation:  
MIX (Random play)  
RPT (Repeat track)  
Folder browsing  
iPad 1, 2 and 3  
NOTE:  
This audio system does not support iPad char-  
ging.  
DISP button:  
While a track with recorded music information tags  
(ID3-tags) is being played, the title of the played track  
is displayed.  
MEDIA button:  
To operate the iPod, push the  
until the USB/iPod mode is selected and then push the  
ENTER button.  
button repeatedly  
When the  
button is pushed repeatedly, further  
information about the track can be displayed along  
with the track title as follows:  
JVH0848X  
Track time ? Artist ? Album ? Track time  
To play Bluetooth® audio, the Bluetooth® audio device  
needs to be paired to the in-vehicle system. For the  
pairing operation, see “Setting items” (P.4-43).  
Track details:  
Pushing and holding the  
button will turn the  
Heater and air conditioner, and audio system 4-27  
AUX device player operation  
MEDIA button:  
The AUX input jack is located on the lower part of the  
instrument panel. (See “AUX (auxiliary) Input Jack”  
(P.4-41).) The AUX audio input jack accepts any  
standard analog audio input such as from a portable  
cassette tape/CD player, MP3 player or laptop  
computer.  
To operate the Bluetooth® audio streaming, push the  
button repeatedly until “BT Audio” is shown.  
A
B
The type of display,  
or  
, shown on the audio  
*
*
system can vary depending on the Bluetooth® version  
of the device.  
Push the  
selected, to play  
button repeatedly until the AUX mode is  
compatible device when it is  
Fast forward/Rewind buttons:  
a
plugged into the AUX input jack.  
When  
or  
button is pushed continuously, the  
track will be played at high speed. When the button is  
released, the track will be played at normal playing  
speed.  
NISSAN strongly recommends using a stereo mini  
plug cable when connecting your music device to the  
audio system. Music may not play properly when a  
monaural cable is used.  
Track up/down:  
By pushing the  
skip forward to the next track or backward to the  
beginning of the current track. Push the or  
or  
button once, the track will  
button more than once to skip through the tracks.  
DISP button:  
If the song contains music information tags (ID3–  
tags), the title of the played song will be displayed. If  
tags are not provided then the display will not show  
any messages.  
When the  
button is pushed repeatedly further  
information about the song can be displayed along  
with the song title.  
A long push of  
detailed overview which after a few seconds returns to  
the main display; or push button briefly.  
button will turn the display into a  
4-28 Heater and air conditioner, and audio system  
17. ENTER/SETTING button  
FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (Type B)  
JVH0866X  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
DISP (display) button  
MEDIA button  
9.  
SCAN button  
10. SEEK TRACK (forward) button  
11. BACK button  
CD eject button  
FM·AM button  
12. Power button/VOL (volume) control knob  
13. RPT (repeat) button  
CD button  
Color display  
14. RDM (random) button  
Apps button  
15. Radio memory buttons  
16. TUNE FOLDER knob  
SEEK TRACK (rewind) button  
Heater and air conditioner, and audio system 4-29  
.
.
AUX Vol.  
24 hour clock is not available.  
On-Screen Clock  
Audio main operation  
Controls the volume level of incoming sound when  
an auxiliary device is connected to the system.  
Choose a setting between 1 and 3 or choose 0 to  
disable the feature entirely.  
.
Head unit:  
When this item is turned on, a clock is always  
displayed in the upper right corner of the screen.  
The auto loudness circuit enhances the low and high  
frequency ranges automatically in both radio reception  
and CD playback.  
Select the “On-Screen Clock” using the TUNE  
FOLDER knob and then push the ENTER/  
SETTING button. You can toggle between ON  
and OFF using the TUNE FOLDER knob.  
Brightness and Contrast  
Adjust the brightness and contrast of the screen.  
Power button/VOL (volume) control knob:  
Select “Brightness” or “Contrast” using the TUNE  
FOLDER knob and then push the ENTER/  
SETTING button. Turn the TUNE FOLDER knob  
to adjust the brightness and contrast of the screen  
to the preferred level.  
Push the Power button to turn the audio system on and  
off while the ignition switch is placed in the “ON” or  
“ACC” position.  
.
.
RDS Display  
RDS (radio data system) information can be  
shown on the display. Select “RDS Display” using  
the TUNE FOLDER knob and then push the  
ENTER/SETTING button. You can toggle between  
ON and OFF using the TUNE FOLDER knob.  
Turn the VOL (volume) control knob to adjust the  
volume.  
.
Clock Adjust  
Adjust the clock according to the following  
procedure.  
Audio settings:  
Language Select  
The settings screen will appear when the ENTER/  
SETTING button is pushed.  
The language settings can be changed.  
Select “Language Select” using the TUNE  
FOLDER knob and then push the ENTER/  
SETTING button. Use the TUNE FOLDER knob  
to select the preferred language.  
The following items are available in the settings screen.  
.
Bluetooth  
It is possible to set the Bluetooth® settings. For  
details of the Bluetooth® settings, see “Bluetooth®  
audio player operation” (P.4-33).  
DISP button:  
.
Bass, Treble, Balance and Fade  
Display of the screen can be canceled by pushing the  
button. You can still listen to music that is being  
played back even while the screen display is turned off.  
If you want to display the screen again, either push the  
Controls the sound of the audio system. Balance  
adjusts the sound between the left and right  
speakers. Fade adjusts the sound between the  
front and rear speakers.  
JVH0867X  
button once more or push the  
button accordingly.  
,
,
,
1) Select “Clock Adjust” using the TUNE  
Select the “Bass”, “Treble”, “Balance” or “Fade”  
using the TUNE FOLDER knob, and then push the  
ENTER/SETTING button. Turn the TUNE  
FOLDER knob to adjust the Bass, Treble, balance  
and Fade of the screen to the preferred level.  
1
FOLDER knob  
and then push the  
*
2
*
ENTER/SETTING button  
.
MEDIA button:  
2) Adjust the hour with the TUNE FOLDER knob  
1
and then push the ENTER/SETTING  
*
Pushing the  
as follows:  
button will switch the audio source  
2
*
button  
.
.
Speed Sens Vol.  
3) Adjust the minute with the TUNE FOLDER  
To change the Speed Sensitive Volume (Speed  
Sens Vol.) level from off (0) to 5, turn the TUNE  
FOLDER knob.  
USB/iPod? Bluetooth ? AUX? USB/iPod  
1
knob  
and then push the ENTER/  
*
2
*
SETTING button  
.
4-30 Heater and air conditioner, and audio system  
Radio operation  
CD player operation  
SEEK TRACK buttons:  
or button to tune from low to high  
or high to low frequencies and to stop at the next  
broadcasting station.  
Place the ignition switch in the “ON” or “ACC”  
position, and insert the compact disc (CD) into the  
slot with the label side facing up. The CD will be  
guided automatically into the slot and start playing.  
Frequency range and step change:  
Push the  
To change the frequency range and step specification  
of the radio, perform the following operations.  
1. Push the ENTER/SETTING button with the audio  
system off.  
After loading the CD, the number of tracks on the CD  
and the play time will appear on the display.  
SCAN buttons:  
2. Select “Radio Frequency Range and Step” and  
push the ENTER/SETTING button.  
Push the  
button to tune from low to high  
If the radio is already operating, it will automatically turn  
off and the CD will play.  
frequencies and stop at each broadcasting station  
for several seconds. Pushing the button again during  
this several seconds period will stop SCAN tuning and  
the radio will remain tuned to that station.  
3. Turn the TUNE/FOLDER knob until appropriate  
region is highlighted, and push the ENTER/  
SETTING button.  
If the system was turned off while the CD was playing,  
pushing the Power button will start the CD.  
If the  
button is not pushed within 5 seconds,  
button:  
FM·AM button:  
SCAN tuning moves to the next station.  
When the  
button is pushed with the system off  
Push the  
button to change the band as follows:  
to Radio memory buttons:  
and the CD loaded, the system will turn on and the CD  
will start to play.  
AM ? FM1 ? FM2? AM  
Up to 12 stations can be set for the FM band (6 each  
for FM1 and FM2) and 6 stations can be set for the AM  
band.  
TUNE (Tuning):  
When the  
button is pushed with the CD loaded  
and the radio playing, the radio will automatically be  
turned off and the CD will start to play.  
Turn the TUNE FOLDER knob for manual tuning.  
1. Choose the radio band using the  
2. Tune to the desired station.  
button.  
Radio Data System (RDS) :  
RDS stands for Radio Data System, and is a data  
information service transmitted by some radio stations  
on the FM band (not AM band) encoded within a  
regular radio broadcast. Currently, most RDS stations  
are in large cities, but many stations are now  
considering broadcasting RDS data.  
SEEK TRACK (rewind/forward)  
buttons:  
3. Push and hold the desired station preset button  
to until the radio mutes.  
When the  
or  
button is pushed and held while  
4. The station indicator will then come on and the  
sound will resume. The station is now set to the  
button memory.  
the CD is being played, the CD will play while fast  
forwarding or rewinding. When the button is released,  
the CD will return to normal play speed.  
RDS can display:  
5. Other buttons can be set in the same manner.  
When the  
or  
button is pushed for less than  
.
.
Station name, such as “The Groove”.  
If the battery cable is disconnected, or if the fuse  
opens, the station memory will be erased. In that case,  
reset the desired stations.  
1.5 seconds while the CD is being played, the next  
track or the beginning of the current track on the CD  
will be played.  
Music or programming type such as “Classical”,  
“Country” or “Rock”.  
Push the  
or  
button more than once to skip  
through the tracks.  
Heater and air conditioner, and audio system 4-31  
can only be operated by the vehicle audio controls.  
USB device operation  
RPT (repeat) button:  
When the button is pushed while the CD is  
* iPod and iPhone are a trademark of Apple Inc.,  
registered in the U.S. and other countries.  
USB main operation:  
The audio system operates when the ignition switch is  
placed in the “ON” or “ACC” position.  
played, the play pattern can be changed as follows:  
Refer to your device manufacturer’s owner information  
regarding the proper use and care of the device.  
(CD)  
The USB port is located on the lower part of the  
instrument panel. See “USB (Universal Serial Bus)  
Connection Port” (P.4-40). Connect a USB memory  
device into the connector. The USB memory device  
will be activated automatically.  
(Normal) ⇔ 1 Track Repeat  
(CD with compressed audio files)  
Compatibility:  
The following models are compatible:  
(Normal) ? 1 Folder Repeat ? 1 Track Repeat ?  
(Normal)  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
iPod nano 1G (Firmware version 1.3.1 -)  
iPod nano 2G (Firmware version 1.1.3 -)  
iPod nano 3G (Firmware version 1.0.0 -)  
iPod nano 4G (Firmware version 1.0.2 -)  
iPod nano 5G (Firmware version 1.0.1 -)  
iPod nano 6G (Firmware version 1.0 -)  
iPod nano 7G (Firmware version 1.0.0 -)  
iPod 5G (Firmware version 1.2.1 -)  
iPod classic (Firmware version 1.0.0 -)  
iPod Touch (iOS 1.1 -)  
If the system has been turned off while the USB  
memory device was playing, pushing the ENTER/  
SETTING button will start the USB memory device.  
RDM (random) button:  
When the  
button is pushed while a CD is being  
The following operations are identical to the audio main  
operation of the Compact Disc (CD) operation. For  
details, see “CD player operation” (P.4-31).  
played, the play pattern can be changed as follows:  
(CD)  
(Normal) ⇔ 1 Disc Random  
(CD with compressed audio files)  
.
.
.
RDM (Random play)  
RPT (Repeat track)  
(Normal) ? 1 Disc Random ? 1 Folder Random ?  
(Normal)  
iPod Touch 2G (iOS 2.1.1 -)  
iPod Touch 3G (iOS 3.1 -)  
MEDIA button:  
iPod Touch 4G (iOS 4.1 -)  
CD eject button:  
To change to the USB mode, push the  
with a USB connected until the USB mode is selected.  
button  
iPod Touch 5G (iOS 6.0.0 -)  
When the  
button is pushed with the CD loaded,  
iPhone (iOS 1.0.0 - 2.2.1)  
the CD will be ejected.  
iPod player operation  
iPhone 3G (iOS 2.1 -)  
When this button is pushed while the CD is being  
played, the CD will be ejected.  
iPhone 3GS (iOS 3.0 -)  
Connecting iPod:  
iPhone 4/4S (iOS 4.0 -)  
The USB port is located on the lower part of the  
instrument panel. Connect the iPod with a USB port  
If the CD comes out and is not removed, it will be  
pulled back into the slot to protect it.  
iPhone 5 (iOS 6.0.0 -)  
using  
a
cable. See “USB (Universal Serial Bus)  
Operations attributable to firmware update by Apple  
are not guaranteed.  
Connection Port” (P.4-40). The battery of the iPod is  
charged while the cable is connected to the vehicle.  
Depending on the version of the iPod, the display on  
the iPod shows a NISSAN or Accessory Attached  
screen when the connection is completed. When the  
iPod is connected to the vehicle, the iPod music library  
4-32 Heater and air conditioner, and audio system  
iPod main operation:  
released, the iPod will return to the normal play speed.  
When the or button is pushed for less than  
Regulatory information:  
Bluetooth® trademark:  
The system operates when the ignition switch is in the  
“ON” or “ACC” position. Push the  
repeatedly to switch to the iPod mode.  
button  
Bluetooth® is a trademark owned  
by Bluetooth SIG, Inc. and li-  
censed to Visteon Corporation.  
1.5 seconds while the iPod is playing, the next track or  
the beginning of the current track on the iPod will be  
played.  
If the system was turned off while the iPod was playing,  
pushing the Power button will start the iPod.  
Push the  
or  
button more than once to skip  
Connecting Bluetooth® device:  
To connect your Bluetooth® device to the vehicle,  
through the tracks.  
If another audio source is playing and the iPod is  
connected, pushing the  
button repeatedly will  
follow the procedure below:  
change the system to the iPod mode.  
RPT (repeat) button:  
When the button is pushed while a track is being  
1. Push the ENTER/SETTING button.  
When the  
is pushed while the iPod is connected,  
the interface for iPod operation is shown on the audio  
display. The items on the menu list can be scrolled by  
turning the TUNE FOLDER knob while the iPod is  
operating. To select an item, push the ENTER/  
SETTING button. Items in the iPod menu appear on  
the display in the following order.  
played, the play pattern can be changed as follows:  
Repeat Off ? 1 Track Repeat? All Repeat ? Repeat  
Off  
RDM (random) button:  
.
.
.
.
.
.
.
.
.
.
Now playing  
Playlists  
When the  
button is pushed while a track is being  
played, the play pattern can be changed as follows:  
Artists  
Shuffle Off ? Track Shuffle ? Shuffle Off  
Albums  
JVH0620X  
Songs  
BACK button:  
2. Select “Bluetooth” .  
Podcasts  
Genres  
The display will return to the previous screen.  
3. Select “Add Phone or Device” . This same screen  
can be accessed to remove, replace or select a  
different Bluetooth® device.  
Bluetooth® audio player operation  
Composers  
Audiobooks  
Shuffle Songs  
If you have a compatible Bluetooth® audio device that  
is capable of playing audio files, the device can be  
connected to the vehicle’s audio system so that the  
audio files on the device play through the vehicle’s  
speakers.  
4. The system acknowledges the command and asks  
you to initiate a connection from the Bluetooth®  
device. The procedure for connecting a Blue-  
tooth® device varies according to the cellular  
phone model. See the Owner’s manual of the  
Bluetooth® device for details.  
For more information about each item, see the iPod  
Owner’s Manual.  
SEEK TRACK (rewind/forward)  
buttons:  
When the  
or  
button is pushed for more than  
1.5 seconds while the iPod is playing, the iPod will play  
while fast forwarding or rewinding. When the button is  
Heater and air conditioner, and audio system 4-33  
Bluetooth® audio main operation:  
.
.
For vehicles without Navigation, Apple  
iPhones must be paired via Bluetooth® for  
NissanConnect Apps to function.  
NissanConnect App smartphone integration  
This vehicle is equipped with Smartphone Integration  
technology. This allows many compatible Smartphone  
applications to be displayed and easily controlled  
through the audio display.  
For Android phones, NissanConnect Apps  
REQUIRES the phone to be paired via Blue-  
tooth®.  
NOTE:  
The registration of a compatible smartphone is  
required to use mobile applications or to access  
connected features of certain vehicle applica-  
tions.  
Apps button:  
The  
mode.  
button launches the Smartphone Integration  
Application download:  
Registering with NissanConnect App:  
JVH1012X  
Once connected, the NissanConnect Mobile App will  
search your phone to determine which compatible  
applications are currently installed. The vehicle will  
then download the in-vehicle interface for each of  
these compatible applications. Once downloaded, the  
user can access many smartphone Applications  
through the vehicle audio screen. For more information  
on application availability visit the NissanConnect  
website.  
To use the Smartphone Integration feature, it is  
necessary for the user to register with NissanConnect.  
In order to register, visit the NissanConnect website for  
more information and to sign up. Once registered,  
download the NissanConnect Mobile App from your  
compatible phone’s application download source and  
then log in to the application.  
To switch to the Bluetooth® audio mode, push the  
button repeatedly until the Bluetooth® audio mode is  
displayed on the screen.  
The controls for the Bluetooth® audio are displayed on  
the screen. Use the Preset  
button to play and use  
the Preset button to pause.  
AUX device player operation  
For Mexico:  
The AUX input jack is located on the lower part of the  
instrument panel. (See “AUX (auxiliary) Input Jack”  
(P.4-41).) The AUX audio input jack accepts any  
standard analog audio input such as from a portable  
cassette tape/CD player, MP3 player or laptop  
computer.  
For more information about this technology, visit the  
website www.nissan.com.mx/connect or www.nissan-  
connect.com.mx or contact NISSAN Customer Service  
01 800 964 77 26 (01 800 9 NISSAN).  
Connecting phone:  
NISSAN strongly recommends using a stereo mini  
plug cable when connecting your music device to the  
audio system. Music may not play properly when a  
monaural cable is used.  
To use this feature, a compatible smartphone must be  
connected via Bluetooth® or USB to the vehicle. For  
the Bluetooth® connecting procedure, see “Bluetooth®  
Hands-Free Phone System (Type B)” (P.4-48).  
NOTE:  
.
For Apple iPhones, NissanConnect Apps  
REQUIRES the phone to be plugged in via  
USB.  
4-34 Heater and air conditioner, and audio system  
FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (Type C)  
Audio main operation  
The audio system operates when the ignition switch is  
placed in the “ON” or “ACC” position.  
Power/VOL (volume) dial:  
Push Power/VOL (volume) dial to turn on and off the  
audio system.  
Turn the Power/VOL (volume) dial to adjust the volume.  
This vehicle may be equipped with Speed Sensitive  
Volume (SSV) function for audio. When this function is  
turned on, the audio volume will be adjusted auto-  
matically as the vehicle speed changes. For operations  
to turn on and off the SSV function, see “Audio  
settings” (P.4-5).  
Audio settings:  
For the operations to adjust the audio settings, see  
“Audio settings” (P.4-5).  
Traffic Announcement:  
Touch “TA” on the audio screen to turn on or off the  
Traffic Information setting. When it is turned on, the  
Traffic Information will interrupt the music that was  
playing and informs the driver of the received traffic  
information.  
Radio operation  
JVH0982X  
The audio system operates when the ignition switch is  
placed in the “ON” or “ACC” position.  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
CD button  
9.  
Back button  
Disc eject button  
FM·AM button  
10. SETUP button  
Radio band select button:  
Push the FM·AM button to change the band as follows:  
For Mexico:  
Disc insert slot  
Seek/Track buttons  
Power/VOL (volume) dial  
AUX (auxiliary) button  
Enter/Scroll dial  
AM ? FM1 ? FM2 ? AM  
Heater and air conditioner, and audio system 4-35  
For the Middle East:  
For FM , touch the “7-12” key to display the 7 - 12  
memory keys.  
through the tracks on the CD. If the last track on a CD  
is skipped, the first track on the disc will play. If the last  
track in a folder of an MP3 CD is skipped, the first track  
of the next folder will play.  
AM ? FM ? AM  
3. The channel indicator will then come on and the  
sound will resume. Programming is now complete.  
If another audio source is playing when the FM·AM  
button is pushed, the audio source playing will  
automatically be turned off and the last radio station  
played will begin playing.  
CD/MP3/WMA display mode:  
CD player operation  
While listening to a CD or an MP3/WMA CD, certain  
text may be displayed (when a CD encoded with text is  
being used). Depending on how the CD or MP3/WMA  
CD is encoded, the text is displayed listing the artist,  
album and song title. Operation keys are also  
displayed on the screen.  
Loading disc:  
Radio tuning:  
Insert a CD into the slot with the label side facing up.  
The CD will be guided automatically into the slot and  
will start playing. If the radio is already playing, it will  
automatically turn off, and the CD will start playing.  
When in radio mode, the radio can be tuned using the  
touchscreen. To bring up the visual tuner, touch the  
“Tune” key on the lower part of the screen. A screen  
appears with a bar running from low frequencies on the  
left to high frequencies on the right.  
Random/Mix:  
CAUTION:  
Touching the “Random/Mix” key while an CD or MP3  
CD is playing will alternate the random play pattern as  
follows:  
One of the following operations can be used for tuning.  
Do not force the compact disc into the slot. This  
could damage the player.  
.
.
.
Touching the bar on the screen  
Touching “ ”/“ ” on the screen  
Turning Enter/Scroll dial  
(CD)  
button:  
(Normal) ? Random/Mix ? (Normal)  
(CD with compressed audio files)  
(Normal) ? Random Folder ? Random All ? (Normal)  
Repeat:  
To return to the regular radio display screen, touch the  
“OK” key.  
When the CD button is pushed with the system off and  
the CD loaded, the system will turn on and the CD will  
start to play.  
Station List:  
When in FM mode, touch “FM List” to display the  
station lists.  
When the CD button is pushed with a CD loaded while  
the radio playing, the radio will turned off and the CD  
will start to play.  
Touching the “Repeat” key while an CD or MP3 CD is  
playing will alternate the repeat play pattern as follows:  
Seek/Track buttons:  
(CD)  
(Normal) ? Repeat ? (Normal)  
(CD with compressed audio files)  
When in radio mode, push the Seek/Track buttons to  
tune from low to high or high to low frequencies and to  
stop at the next broadcasting station.  
Seek/Track button:  
When the  
or  
button is pushed for more than  
(Normal)  
(Normal)  
?
Repeat Track  
?
Repeat Folder  
?
1.5 seconds while the CD is being played, the CD will  
play while fast forwarding or rewinding. When the  
button is released, the CD will return to normal play  
speed.  
Station memory keys:  
Up to 6 stations can be stored for AM band, and up to  
12 stations can be stored for each of the other bands.  
Browse:  
Touch the “Browse” key to display the titles on the CD  
in list format. Touch the title of a song in the list to  
begin playing that song. If an MP3 CD is playing,  
touching the “Browse” key will also list the folders on  
the disc. Touch the “Folder Up” key to view the lists in  
When the  
or  
button is pushed for less than  
1. Choose the radio band.  
1.5 seconds while the CD is being played, the next  
track or the beginning of the current track on the CD  
will be played. Push the button several times to skip  
2. Tune to the desired station using manual or seek  
tuning. Touch and hold any of the desired station  
memory keys until a beep sound is heard.  
4-36 Heater and air conditioner, and audio system  
the upper layer. Follow the procedure for selecting a  
song with the touchscreen to choose a folder.  
USB screen operation:  
iPod player operation  
While files on a USB memory device are playing, the  
play pattern can be altered so that songs are repeated  
or played randomly.  
Connecting iPod:  
The USB port is located on the lower part of the  
instrument panel. See “USB (Universal Serial Bus)  
Connection Port” (P.4-40).  
Disc eject button:  
Random/Mix:  
When the Disc eject button is pushed while a CD is  
loaded, the CD will be ejected.  
Touching the “Random/Mix” key on the screen while an  
USB memory device is playing will alternate the  
random play pattern as follows:  
If your iPod supports charging via a USB connection,  
its battery will be charged while connected to the  
vehicle with the ignition switch placed in the “ON” or  
“ACC” position.  
If the CD is not removed within 10 seconds, the CD  
will be reloaded.  
(Normal) ? Random Folder ? Random All ? (Normal)  
USB device operation  
The audio system operates when the ignition switch is  
placed in the “ON” or “ACC” position.  
Compatibility:  
Repeat:  
The following models are compatible:  
Touching the “Repeat” key on the screen while an USB  
memory device is playing will alternate the repeat play  
pattern as follows:  
.
.
.
.
.
.
.
.
.
.
.
iPod Classic 5th Generation (firmware version  
1.3.0 or later)  
The USB port is located on the lower part of the  
instrument panel. See “USB (Universal Serial Bus)  
Connection Port” (P.4-40). Connect a USB memory  
device into the connector. The USB memory device  
will be activated automatically.  
(Normal)  
(Normal)  
?
Repeat Track  
?
Repeat Folder  
?
iPod Classic 6th Generation (firmware version  
2.0.1 or later)  
iPod Classic 7th Generation (firmware version  
2.0.4 or later)  
Browse:  
Refer to your device manufacturer’s owner information  
regarding the proper use and care of the device.  
Touch “Browse” key to display USB interface. Select  
the songs you wish to play by touching the item on the  
screen.  
iPod Touch 2nd Generation (firmware version  
4.2.1or later)*  
USB main operation:  
iPod Touch 3rd Generation (firmware version 5.1  
or later)*  
If another audio source is playing and a USB memory  
device is inserted, push the AUX button until the  
screen on the display changes to the USB memory  
mode.  
Seek/Track buttons:  
iPod Touch 4th Generation (firmware version  
5.11or later)*  
Push the  
button while an audio file on the USB  
memory device is playing to return to the beginning of  
the current track. Push the button several times to skip  
backward several tracks.  
iPod nano - 1st generation (firmware version 1.3.1  
or later)  
If the system has been turned off while the USB  
memory device was playing, push the Power/VOL  
(volume) dial to restart the USB memory device.  
iPod nano - 2nd generation (firmware version  
1.1.3 or later)  
Push the  
button while an audio file on the USB  
memory device is playing to advance one track. Push  
the button several times to skip forward several tracks.  
if the last track on the USB memory device is skipped,  
the first track of the next folder is played.  
Touch the name of a song on the screen to begin  
playing that song.  
iPod nano - 3rd generation (firmware version 1.1.3  
or later)  
iPod nano - 4th generation (firmware version 1.0.4  
or later)  
iPod nano - 5th generation (firmware version 1.0.2  
or later)  
Heater and air conditioner, and audio system 4-37  
.
iPod nano - 6th generation (firmware version 1.1  
or later)  
screen.  
If no character is selected after thirty seconds, the  
display returns to normal.  
When the iPod is playing, touch the “Menu” key to  
bring up the iPod interface.  
.
.
.
.
iPhone 3G (firmware version 4.2.1or later)  
iPhone 3GS (firmware version 5.1 or later)  
iPhone 4 (firmware version 5.1 or later)  
iPhone 4S (firmware version 5.1 or later)  
Random and repeat play mode:  
Depending on the iPod model, the following items may  
be available on the menu list screen. For further  
information about each item, see the iPod Owner’s  
Manual.  
While the iPod is playing, the play pattern can be  
altered so that songs are repeated or played randomly.  
Shuffle/Mix:  
* Some features of this iPod may not be fully functional.  
Touching the “Shuffle/Mix” key on the screen while an  
iPod is playing will alternate the random play pattern as  
follows:  
.
.
.
.
.
.
.
.
Playlists  
Artists  
Make sure that your iPod firmware is updated to the  
version indicated above.  
Albums  
iPod main operation:  
(Normal) ? Shuffle Songs/Mix songs ? (Normal)  
Genres  
If the system has been turned off while the iPod was  
playing, pushing the Power/VOL (volume) dial will start  
the iPod.  
Repeat:  
Songs  
Touching the “Repeat” key on the screen while an iPod  
is playing will alternate the repeat play pattern as  
follows:  
Composers  
Audiobooks  
Podcasts  
If another audio source is playing and a iPod is  
connected, push the AUX button until the screen on  
the display changes to the iPod mode.  
(Normal) ? Repeat Song ? (Normal)  
Scrolling menus:  
Refer to your device manufacturer’s owner information  
regarding the proper use and care of the device.  
Seek/Track buttons:  
Push the Seek/Track (rewind) or Seek/Track (fast  
forward) button to skip backward or forward one track.  
Interface operation:  
Push and hold the Seek/Track (rewind) or Seek/Track  
(fast forward) button for 1.5 seconds while a track is  
playing to reverse or fast forward the track being  
played. The track plays at an increased speed while  
reversing or fast forwarding. When the button is  
released, the track returns to normal play speed.  
Bluetooth® audio player operation  
JVH0681X  
If you have a compatible Bluetooth® audio device that  
is capable of playing audio files, the device can be  
connected to the vehicle’s audio system so that the  
audio files on the device play through the vehicle’s  
speakers.  
While navigating long lists of artists, albums or songs  
in the music menu, it is possible to scroll the list by the  
first character in the name. To activate character  
indexing, touch the “A-Z” key in the upper right corner  
of the screen. Turn the ENTER/Scroll dial to choose  
the number or letter to jump to in the list and then push  
the ENTER/Scroll dial.  
JVH0680X  
The interface for iPod operation shown on the vehicle’s  
audio system display screen is similar to the iPod  
interface. Use the touchscreen, BACK button or the  
ENTER/Scroll dial to navigate the menus on the  
4-38 Heater and air conditioner, and audio system  
Bluetooth® trademark:  
Bluetooth® is a trademark owned  
then log in to the application.  
For Mexico:  
AUX device player operation  
The AUX input jack is located on the lower part of the  
instrument panel. (See “AUX (auxiliary) Input Jack”  
(P.4-41).) The AUX audio input jack accepts any  
standard analog audio input such as from a portable  
cassette tape/CD player, MP3 player or laptop  
computer.  
by Bluetooth SIG, Inc. and li-  
censed to Bosch.  
For more information about this technology, visit the  
website www.nissan.com.mx/connect or www.nissan-  
connect.com.mx or contact NISSAN Customer Service  
01 800 964 77 26 (01 800 9 NISSAN).  
Connecting Bluetooth® audio:  
Connecting phone:  
NISSAN strongly recommends using a stereo mini  
plug cable when connecting your music device to the  
audio system. Music may not play properly when a  
monaural cable is used.  
To use this feature, a compatible smartphone must be  
connected via Bluetooth® or USB to the vehicle. For  
the Bluetooth® connecting procedure, see “Bluetooth®  
Hands-Free Phone System (Type C)” (P.4-51).  
AUX button:  
NOTE:  
.
.
.
For Apple iPhones, NissanConnect Apps  
REQUIRES the phone to be plugged in via  
USB.  
To switch to the AUX mode, push the AUX button until  
the AUX mode is selected while the ignition switch is  
placed in the “ON” or “ACC” position.  
JVH1010X  
For Vehicles without Navigation, Apple  
iPhones must be paired via Bluetooth® for  
NissanConnect Apps to function.  
To connect your Bluetooth® audio device to the  
vehicle, follow the procedure below:  
NissanConnect App smartphone integration  
This vehicle is equipped with Smartphone Integration  
technology. This allows many compatible Smartphone  
applications to be displayed and easily controlled  
through the audio display.  
For Android phones, NissanConnect Apps  
REQUIRES the phone to be paired via Blue-  
tooth®.  
1. Push the SETUP button.  
2. Select the “Telephone & Bluetooth” key.  
3. Select the “Pair New Device” key.  
Application download:  
NOTE:  
4. The system acknowledges the command and asks  
you to initiate connecting from the phone handset.  
The connecting procedure of the cellular phone  
varies according to each cellular phone model.  
See the Bluetooth® device Owner’s Manual for  
details.  
Once connected, the NissanConnect Mobile App will  
search your phone to determine which compatible  
applications are currently installed. The vehicle will  
then download the in-vehicle interface for each of  
these compatible applications. Once downloaded, the  
user can access many smartphone Applications  
through the vehicle audio screen. For more information  
on application availability visit the NissanConnect  
website.  
The registration of a compatible smartphone is  
required to use mobile applications or to access  
connected features of certain vehicle applica-  
tions.  
Registering with NissanConnect App:  
Bluetooth® audio player main operation:  
To use the Smartphone Integration feature, it is  
necessary for the user to register with NissanConnect.  
In order to register, visit the NissanConnect website for  
more information and to sign up. Once registered,  
download the NissanConnect Mobile App from your  
compatible phone’s application download source and  
To switch to the Bluetooth® audio mode, push the AUX  
button repeatedly until the Bluetooth® audio mode is  
displayed on the screen.  
The controls for the Bluetooth® audio are displayed on  
the screen.  
Heater and air conditioner, and audio system 4-39  
SEEK tuning (radio):  
STEERING WHEEL SWITCH FOR AUDIO  
CONTROL (if equipped)  
USB (Universal Serial Bus) CONNECTION  
PORT  
Push the tuning switch for more than 1.5 seconds to  
seek the next or previous radio station.  
APS (Automatic Program Search) FF, APS REW  
(CD):  
Push the tuning switch for less than 1.5 seconds to  
return to the beginning of the present program or skip  
to the next program. Push several times to skip back or  
skip through programs.  
CD CARE AND CLEANING  
SAA3641  
SAA3444  
1.  
2.  
3.  
SOURCE select switch  
Tuning switch  
The USB port is located on the lower part of the  
instrument panel.  
VOLUME control switch  
The illustration is for the Left-Hand Drive (LHD) model.  
For the Right-Hand Drive (RHD) model, the layout will  
be the opposite.  
The audio system can be operated using the controls  
on the steering wheel.  
Refer to your device manufacturer’s owner information  
regarding the proper use and care of the device.  
SOURCE select switch  
Push the SOURCE select switch to change the mode  
to available audio source.  
SAA0451  
WARNING:  
.
.
.
Handle a CD by its edges. Never touch the  
surface of the disc. Do not bend the disc.  
VOLUME control switch  
Push up or down the VOLUME control switch to  
increase or decrease the volume.  
Do not connect, disconnect or operate the USB  
device while driving. Doing so can be a distrac-  
tion. If distracted you could lose control of your  
vehicle and cause an accident or serious injury.  
Always place the discs in the storage case when  
they are not being used.  
To clean a disc, wipe the surface from the center  
to the outer edge using a clean, soft cloth. Do not  
wipe the disc using a circular motion.  
Tuning switch  
Memory change (radio):  
CAUTION:  
Push the tuning switch for less than 1.5 seconds to  
change the next or previous radio preset.  
Do not use a conventional record cleaner or  
alcohol intended for industrial use.  
.
Do not force the USB device into the USB  
port. Inserting the USB device tilted or  
upside- down into the port may damage  
the port. Make sure that the USB device is  
connected correctly into the USB port.  
.
A new disc may be rough on the inner and outer  
edges. Remove the rough edges by rubbing the  
inner and outer edges with the side of a pen or  
pencil as illustrated.  
4-40 Heater and air conditioner, and audio system  
CAR PHONE OR CB RADIO  
When installing a CB, ham radio or a car phone in your  
vehicle, be sure to observe the following cautions,  
otherwise the new equipment may adversely affect the  
Engine Control System and other electronic parts.  
.
.
Do not grab the USB port cover (if equipped)  
when pulling the USB device out of the port.  
This could damage the port and the cover.  
WARNING:  
Do not allow the cable or an external device  
connected to the AUX terminal to affect your  
driving.  
Do not leave the USB cable in a place where  
it can be pulled unintentionally. Pulling the  
cable may damage the port.  
CAUTION:  
NOTE:  
.
.
.
Keep the antenna as far away as possible  
from the Electronic Control Module.  
Depending on the external device, please  
note that the volume may be louder or  
quieter than that of the external device.  
AUX (auxiliary) INPUT JACK  
Keep the antenna wire at least 20 cm (8 in)  
away from the Engine Control harnesses. Do  
not route the antenna wire next to any  
harnesses.  
.
.
When the AUX contacts the plug of the  
connector cable, noise may be heard.  
The connected external device cannot be  
operated with the main audio system. The  
volume and sound quality can be adjusted.  
.
.
.
Adjust the antenna standing wave ratio as  
recommended by the manufacturer.  
Connect the ground wire from the radio  
chassis to the body.  
.
.
The song title in the external device cannot  
be displayed on the audio display.  
For the power source of the external device,  
use the special battery. The external device  
cannot be charged with the AUX terminal.  
Noise may be heard if the CD, radio etc. is  
operated while charging the battery with the  
power socket of the vehicle.  
For details, consult a NISSAN dealer.  
JVH0370X  
The illustration is for the Left-Hand Drive (LHD) model.  
For the Right-Hand Drive (RHD) model, the layout will  
be the opposite.  
The AUX input jack is located on the lower part of the  
instrument panel. The AUX input jack accepts any  
standard analog audio input such as from a portable  
cassette tape/CD player, MP3 player or laptop  
computer.  
Push the  
selected, to play  
button repeatedly until the AUX mode is  
compatible device when it is  
a
plugged into the AUX input jack.  
NISSAN strongly recommends using a stereo mini  
plug cable when connecting your music device to the  
audio system. Music may not play properly when a  
monaural cable is used.  
Heater and air conditioner, and audio system 4-41  
Bluetooth® HANDS-FREE PHONE  
SYSTEM (Type A)  
iPod, USB audio, Bluetooth® audio or AUX source  
mode will be muted and will stay muted until the active  
call has ended.  
*Type A is for models without navigation system  
(without color display).  
REGULATORY INFORMATION  
Bluetooth® Trademark  
Bluetooth® is a trademark owned  
by Bluetooth SIG, Inc. and li-  
censed to Visteon Corporation.  
The Bluetooth® system may not be able to connect  
with your cellular phone for the following reasons:  
WARNING:  
.
.
Use a phone after stopping your vehicle in a  
safe location. If you have to use a phone  
while driving, exercise extreme caution at all  
times so full attention may be given to  
vehicle operation.  
.
.
The cellular phone is too far away from the vehicle.  
The Bluetooth® mode on your cellular phone has  
not been activated.  
CE statement  
Hereby Visteon Corp. declares that this system is in  
compliance with the essential requirements and other  
relevant provisions of Directive 1999/5/EC.  
.
.
Your cellular phone has not been paired with the  
Bluetooth® system of the audio unit.  
The mobile phone does not support Bluetooth®  
technology.  
If you find yourself unable to devote full  
attention to vehicle operation while using  
the phone, pull off the road to  
location and stop your vehicle before doing  
so.  
a
safe  
NOTE:  
.
For details, see your cellular phone’s Own-  
er’s Manual.  
NOTE:  
The audio system only supports Bluetooth®  
devices with AVRCP (Audio Video Remote Con-  
trol Profile) version 1.3, or 1.0 or earlier.  
CAUTION:  
.
For assistance with your cellular phone  
integration, please visit your local NISSAN  
dealer.  
To avoid draining the vehicle battery, use  
phone after starting the engine.  
a
CONTROL BUTTONS AND MICROPHONE  
Instrument panel:  
Bluetooth® is a wireless radio communication stan-  
dard. This system offers a hands-free facility for your  
cellular phone to enhance driving comfort.  
To use the Bluetooth® Hands-Free Phone System,  
your cellular phone must first be setup. For details, see  
“Bluetooth® settings” (P.4-43). Once it has been  
setup, the hands-free mode is automatically activated  
on the registered celllular phone (via Bluetooth®) when  
it comes into range.  
A notification message appears on the audio display  
when the phone is connected, when an incoming call  
is being received, as well as when a call is initiated.  
JVH0913X  
When a call is active, the audio system, microphone,  
and steering wheel mounted control buttons enable  
hands-free communication.  
1.  
2.  
A-Z button  
Back  
button  
If the audio system is in use at the time, the radio, CD,  
4-42 Heater and air conditioner, and audio system  
Bluetooth® SETTINGS  
Setting items  
To set up the Bluetooth® system with a device, the  
following items are available:  
3.  
4.  
Phone  
button  
ENTER button/MENU knob  
Pairing device  
Enter the phone setup menu via the  
Steering wheel mounted control:  
button on  
the instrument panel, select the “Bluetooth” key, and  
then check if the Bluetooth® is set to on. (If not, push  
the ENTER button to turn it on.)  
To setup the Bluetooth® system to pair (connect or  
register) your preferred cellular phone, follow the  
following procedure.  
1. To pair a device, use “Scan device” key or the  
“Pair device” key on the display. For details, see  
“Setting items” (P.4-43).  
2. A notification message will be displayed when the  
phone is successfully paired.  
JVH1031X  
JVH0847X  
1.  
2.  
3.  
Volume control switch −/+  
.
.
.
Scan device  
3. The display will return to the current audio source  
status after the connection is complete.  
Bluetooth® devices can be paired with the system.  
PHONE SEND  
PHONE END  
button  
button  
A
maximum of  
5
Bluetooth® devices can be  
.
While the Bluetooth® connection is active, the  
following icons will appear on the display.  
registered.  
Microphone:  
Microphone is located near the map light.  
Pair device  
—
—
—
: Signal strength indicator  
Bluetooth® devices can be paired with the system.  
maximum of  
Bluetooth® devices can be  
: Battery status indicator*  
A
5
: Bluetooth® connection ON indicator  
registered.  
*: If low battery is indicated, the Bluetooth®  
device must be recharged soon.  
Sel. device  
Paired Bluetooth® devices are listed and can be  
selected for connection.  
.
.
Up to 5 different Bluetooth® devices can be  
connected. However, only one device can be used  
at a time. If 5 different Bluetooth® registered  
devices are registered, a new device can only  
replace one of the 5 existing paired devices.  
.
.
Del. device  
A registered Bluetooth® device can be deleted.  
Bluetooth  
If this setting is turned off, the connection between  
the Bluetooth® devices and the in-vehicle Blue-  
tooth® module will be cancelled.  
The pairing procedure and operation may vary  
according to device type and compatibility. See  
the Bluetooth® device Owner’s Manual for further  
details.  
Heater and air conditioner, and audio system 4-43  
Scan device:  
Pair device:  
capability of the registered device:  
1. Push the  
button on the instrument panel.  
1. Turn on the Bluetooth® on the audio unit. See  
.
.
: Cellular phone integration  
Select “Scan device” key. The audio unit searches  
for the Bluetooth® devices and shows all devices  
that were found.  
Make sure your Bluetooth® device is available at  
this time.  
“Bluetooth” (P.4-44).  
: Audio streaming (A2DP – Advanced Audio  
Distribution Profile)  
2. Use the audio unit to pair:  
Push the  
button on the instrument panel.  
Del. device:  
A registered device can be removed from Bluetooth®  
system registration. Select a registered device and  
push the ENTER button to confirm to deletion.  
Select the “Pair Device” key.  
The pairing procedure depends on the Bluetooth®  
device to be connected:  
2. Select the device to be paired using the MENU-  
knob.  
a. Device without PIN code:  
Bluetooth:  
3. The pairing procedure depends on the device to  
be connected:  
The Bluetooth® connection will be automatically  
connected without any further input.  
If Bluetooth® signal has been turned off, a notification  
message “ON/OFF” appears when you select “Blue-  
a. Device without PIN code:  
tooth” from the phone menu. (Push the  
button on  
b. Device with PIN code:  
The Bluetooth® connection will be automatically  
connected without any further input.  
the instrument panel to display the phone menu.) To  
turn the Bluetooth® signal on, push the button and a  
follow up screen will appear. Select “ON” and push the  
ENTER button to display the Bluetooth® settings menu  
screen.  
Two different ways of pairing are possible  
depending on the device. For the correct proce-  
dure details, see “Scan device” (P.4-44).  
b. Device with PIN code:  
3. Use the Bluetooth® audio/cellular phone device to  
pair:  
Two different ways of pairing are possible  
depending on the device:  
.
USING THE SYSTEM  
The hands-free mode can be operated using the  
button on the instrument panel.  
Type A:  
a. Switch on the search mode for Bluetooth®  
devices.  
The message “To pair” and “Enter Pin” 0000  
will be displayed.  
If the search mode finds the audio unit it will be  
shown on the device display.  
Confirm the PIN code on the device. The  
Bluetooth® connection will be made.  
Receiving a call  
b. Select the unit device shown as “My Car”.  
.
Type B:  
c. Enter the number code shown on the relevant  
device with the device’s own keypad, and push  
the confirmation key on the Bluetooth® device.  
The message “Pairing request” and “Confirm  
password” together with a 6 digit code will be  
displayed. The unique and identical code  
should be displayed on the device. If the code  
is identical confirm on the device.  
Refer to the relevant Bluetooth® device Owner’s  
Manual for further details.  
Sel. device:  
The Bluetooth® connection will be made.  
The paired device list shows which Bluetooth® audio  
or cellular phone devices have been paired or  
registered to the system. Select the appropriate device  
to connect to the system.  
JVH0857X  
When receiving an incoming call, the display on the  
The following symbols (if equipped) indicate the  
4-44 Heater and air conditioner, and audio system  
audio unit will show the caller’s phone number (or a  
notification message that the caller’s phone number  
cannot be shown) and three operation icons as  
illustrated. To highlight different icons, turn the MENU  
knob. Push the ENTER button to select the highlighted  
icon.  
Making a call from the phonebook:  
Initiating a call  
WARNING:  
Once the Bluetooth® connection has been made  
between the registered cellular phone and the  
hands-free phone system, phonebook data will be  
transferred automatically to the hands-free phone  
system. The transfer may take a while before comple-  
tion.  
Park the vehicle in a safe location, and apply the  
parking brake before making a call.  
1
*
Answering and during a call:  
Answer the call by selecting “ ”.  
NOTE:  
During the call, the following icons are available:  
Phone book data will be erased when:  
.
Switching to another registered cellular  
phone.  
.
.
.
:
Select this item to end the call.  
.
.
Cellular phone is disconnected.  
:
The registered cellular phone is deleted  
from the audio system.  
Select this item to put the call on hold.  
:
Select this item to transfer the call from the hands-  
free phone system to your cellular phone.  
1. Push the  
button on instrument panel.  
JVH0863X  
2. Turn the MENU knob to highlight “Phone Book”  
and push the ENTER button.  
.
.
:
A call can be initiated using one of the following  
methods:  
Select this item to transfer the call back to the  
hands-free phone system from the cellular phone.  
3. Scroll down through the list, select the appropriate  
contact name (highlighted), and push the ENTER  
button.  
.
.
.
.
Making a call from the phonebook  
Manually dialing a phone number  
Redialing  
#123:  
Select this item to enter numbers during a call. For  
example, use this function when directed by an  
automated phone system to dial an extension  
number.  
4. The screen will show the number to be dialled.  
Push the ENTER button to dial the number.  
Using call history (Call List menu)  
— Dialled  
If more than one number is registered, select an  
appropriate icon.  
— Received  
2
*
Putting a call on hold:  
.
.
.
: Home  
— Missed  
To put a call on hold, select “ ”. Push ENTER button  
: Cellular phone  
: Office  
again to take the call. To reject the call select  
the steering wheel.  
on  
3
Rejecting a call:  
*
To reject an incoming call, select “  
on the steering wheel.  
” or push  
Heater and air conditioner, and audio system 4-45  
Quick searching the phonebook:  
Manually dialling a phone number:  
Redialing:  
To redial or call the last number dialled, push and hold  
the  
button on the instrument panel or  
button on steering wheel for more than 2 seconds.  
Using call history (Call List menu):  
JVH0859X  
JVH0858X  
To dial a phone number manually, perform the following  
operation:  
The quick search mode can be used as follows:  
1. Push the A-Z button.  
1. Push the  
button on the instrument panel  
2. Turn the MENU knob for the first alphabetic or  
numerical letter of the contact name. Once high-  
lighted, push the ENTER button to select the  
letter.  
JVH0860X  
and turn the MENU knob to highlight “Dial  
Number”.  
A number from the dialled, received, or missed call lists  
can also be used to make a call.  
2. Push the ENTER button to select “Dial Number”.  
3. Turn the MENU knob to scroll along and highlight  
each number of the phone number. Push the  
ENTER button to select the highlighted number.  
3. The display will show the corresponding contact  
name(s). Where necessary, use the MENU knob  
to scroll further for the appropriate contact name  
to call.  
1. Push the  
button on the instrument panel  
and select “Call List” on the display.  
2. Turn the MENU knob and scroll to an item, and  
push the ENTER button to select an item.  
To delete the last number entered, scroll to the  
“/” (Backspace symbol) and once highlighted,  
push the ENTER button. The last number will be  
deleted. Pushing the ENTER button repeatedly  
will delete each subsequent number.  
4. The screen will show the number to be dialled.  
Push the ENTER button to dial the number.  
Available items:  
.
.
.
Dialed  
Use the dialled call mode to make a call which  
is based on the list of outgoing (dialled) calls.  
4. After entering the last number, scroll to the  
Received  
“
” symbol and push the ENTER button to  
dial the number.  
Use the received call mode to make a call  
which is based on the list of received calls.  
Missed  
Use the missed call mode to make a call which  
is based on the list of missed calls.  
4-46 Heater and air conditioner, and audio system  
3. Scroll to the preferred phone number and push  
— Phone  
Switch the phone ringing volume on or off.  
General settings  
the ENTER button or  
instrument panel.  
button on the  
.
PB download  
Download the phonebook of the mobile device to  
the audio unit manually.  
Second incoming call  
JVH0862X  
Using the MENU knob/ENTER button, select “Phone  
Settings” from the phone menu.  
JVH0861X  
Volume settings and manually downloading the phone-  
book can be done using this menu.  
Whenever there is a second incoming call is shown in  
the display. By selecting the “ ” the call is accepted  
and the current call is put on hold.  
Menu operation:  
Turn the MENU knob to change the highlighted item  
and to change the volume settings.  
Selecting the “  
” using the MENU knob / ENTER  
button rejects the second incoming call. When this is  
done during the conversation it ends the call.  
Push the ENTER button to select the highlighted item  
and to apply the setting.  
Selecting the “ ” using the MENU knob / ENTER  
button switches the call on line between the first and  
the second call.  
Menu items:  
.
Volume  
— Ring  
Set the phone ringing volume.  
— Call  
Set the volume of the conversation during a  
call.  
Ringtone  
— Car  
.
Switch the ringtone to ring from the vehicle or  
the cellular phone.  
Heater and air conditioner, and audio system 4-47  
Bluetooth® HANDS-FREE PHONE  
SYSTEM (Type B)  
Type B is for models without navigation system  
(with color display).  
NOTE:  
.
.
.
While a cellular phone is connected through the  
Bluetooth® wireless connection, the battery power  
of the cellular phone may discharge quicker than  
usual. The Bluetooth® Hands-Free Phone System  
cannot charge cellular phones.  
Some devices require the user to accept con-  
nections to other Bluetooth® devices. If your  
phone does not connect automatically to the  
system, consult the phone’s Owner’s Manual for  
details on device operation.  
You can connect up to 5 different Bluetooth® cellular  
phones to the in-vehicle phone module. However, you  
can talk on only one cellular phone at a time.  
WARNING:  
.
.
Use a phone after stopping your vehicle in a  
safe location. If you have to use a phone  
while driving, exercise extreme caution at all  
times so full attention may be given to  
vehicle operation.  
Some cellular phones or other devices may cause  
interference or a buzzing noise to come from the  
audio system speakers. Storing the device in a  
different location may reduce or eliminate the  
noise.  
Before using the Bluetooth® Hands-Free Phone  
System, refer to the following notes.  
If you find yourself unable to devote full  
attention to vehicle operation while talking  
on the phone, pull off the road to a safe  
location and stop your vehicle before doing  
so.  
Refer to the cellular phone Owner’s Manual  
regarding the telephone charges, cellular phone  
antenna and body, etc.  
.
Set up the wireless connection between  
a
compatible cellular phone and the in-vehicle  
phone module before using the hands-free phone  
system.  
REGULATORY INFORMATION  
Bluetooth® Trademark  
.
.
Some Bluetooth® enabled cellular phones may not  
be recognized or work properly. For details,  
consult a NISSAN dealer.  
CAUTION:  
Bluetooth® is a trademark owned  
by Bluetooth SIG, Inc. and li-  
censed to Visteon Corporation.  
To avoid draining the vehicle battery, use  
phone after starting the engine.  
a
You will not be able to use a hands-free phone  
under the following conditions:  
Your NISSAN is equipped with the Bluetooth® Hands-  
Free Phone System. If you have a compatible Blue-  
tooth® enabled cellular phone, you can set up the  
wireless connection between your cellular phone and  
the in-vehicle phone module. With Bluetooth® wireless  
technology, you can make or receive a hands-free  
telephone call with your cellular phone in the vehicle.  
CONTROL BUTTONS AND MICROPHONE  
— Your vehicle is outside of the cellular service  
area.  
— Your vehicle is in an area where it is difficult to  
receive a cellular signal; such as in a tunnel, in  
an underground parking garage, near a tall  
building or in a mountainous area.  
Once your cellular phone is connected to the in-  
vehicle phone module, no other phone connecting  
procedure is required. Your phone is automatically  
connected with the in-vehicle phone module when the  
ignition switch is placed in the “ON” position with the  
previously connected cellular phone turned on and  
carried in the vehicle.  
— Your cellular phone is locked to prevent it from  
being dialed.  
.
.
When the radio wave condition is not ideal or  
ambient sound is too loud, it may be difficult to  
hear the other person’s voice during a call.  
JVH1039X  
Do not place the cellular phone in an area  
surrounded by metal or far away from the in-  
vehicle phone module to prevent tone quality  
degradation and wireless connection disruption.  
1.  
button  
While using the Bluetooth® Hands-Free Phone  
System, tilt up or down to manually control the  
phone system.  
4-48 Heater and air conditioner, and audio system  
2.  
3.  
4.  
5.  
Volume control switch −/+  
1. Push the ENTER/SETTING button.  
currently selected name. Push the  
button to  
PHONE SEND  
PHONE END  
Microphone  
button  
button  
move through the list and select the person you  
wish to call. Select “Record Name” to record a  
name for the current phonebook entry. Select  
“Delete Recording” to delete a recorded name for  
the current phonebook entry.  
2. Use the TUNE FOLDER knob to select “Blue-  
tooth” and then push the ENTER/SETTING  
button.  
3. Select “Add Phone or Device” and then push the  
ENTER/SETTING button.  
USING THE SYSTEM  
The hands-free mode can be operated using the  
button on the steering wheel.  
.
Transfer Entry  
4. When a message with a PIN appears on the  
screen, operate the Bluetooth® phone to enter the  
PIN.  
This command can be used to transfer multiple  
contacts at a time. This feature is not available with  
automatic “Phonebook Download” setting turned  
on. To enable manual contact transfer capability,  
turn off the “Phonebook Download” setting in the  
Setting menu. See “Bluetooth® settings” (P.4-51)  
for more information.  
Choosing a language  
You can interact with the Bluetooth® Hands-Free  
Phone System using several languages that are  
available. For operations to change the language, see  
“Audio main operation” (P.4-30).  
5. The connecting procedure varies according to  
each phone. See the phone’s Owner’s Manual for  
details.  
List of commands  
Commands can be used to operate the Bluetooth®  
Hands-Free Phone System. Push the  
bring up the phone command menu. The available  
options are:  
The ability to transfer contacts via the OPP  
Bluetooth® profile depends on your mobile phone.  
See your phone’s Owner’s Manual for details and  
instructions.  
Changing voice feedback volume  
If you want to adjust the volume of the voice feedback,  
push the volume control button (+ or - side of the  
volume control switch) while being provided with  
feedback. You can also use the VOL (volume) control  
knob on the audio unit.  
button to  
NOTE:  
.
.
.
.
.
Phonebook  
The “Transfer Entry” command is not avail-  
able when the vehicle is in motion.  
Record Name  
Recent Calls  
Show Applications  
Select Phone  
Initialization  
.
Delete Entry  
When the ignition switch is placed in the “ON”  
position, the Bluetooth® Hands-Free Phone System  
is initialized which takes a few seconds. If the  
button is pushed before the initialization completes, the  
system will announce that the hands-free phone  
system is not ready.  
Select this command to delete an entry in the  
phonebook. Choose an entry to delete.  
Phonebook:  
Record Name:  
The following commands are available under “Phone-  
book”.  
The system allows you to record custom voice tags for  
contact names in the phonebook. Up to 40 voice tags  
can be recorded to the system.  
NOTE:  
Connecting procedure  
You can register up to 5 different Bluetooth® cellular  
phones in the in-vehicle phone module. However, you  
can talk on only one cellular phone at a time.  
To connect a phone to the Bluetooth® Hands-Free  
Phone System;  
Each phone has its own separate phonebook.  
You cannot access Phone A’s phonebook if you  
are currently connected with Phone B.  
Recent Calls:  
The following commands are available under “Recent  
Calls”:  
.
List Names  
.
Incoming Calls  
Select this command to have the system list the  
names in the phonebook one by one in alphabe-  
tical order. Select “Dial” to dial the number of the  
Select this command to list the last five incoming  
calls to the vehicle. If the call is from an entry in the  
Heater and air conditioner, and audio system 4-49  
phonebook, the name will be displayed. Other-  
wise, the phone number of the incoming call will  
be displayed.  
NOTE:  
During a call  
While a call is active, push the  
additional options. Select one of the following com-  
mands:  
Compatible smartphone and registration are  
necessary to access the applications. See “Nis-  
sanConnect App smartphone integration” (P.4-  
34) for more information.  
button to access  
Select “Dial” to call the number. Select “Next  
Entry” or “Previous Entry” to move through the list  
of incoming calls.  
.
“Mute On” / “Mute Off”  
Select Phone:  
Select the command to mute or unmute the  
system.  
.
.
Missed Calls  
Select this command to select a phone to use from a  
list of those phones connected to the vehicle.  
Select this command to list the last five missed  
calls to the vehicle. If the call is from an entry in the  
phonebook, the name will be displayed. Other-  
wise, the phone number of the missed call will be  
displayed. Select “Dial” to call the number. Select  
“Next Entry” or “Previous Entry” to move through  
the list of missed calls.  
.
“Transfer Call”  
Select this command to transfer the call to the  
handset. To transfer the call back from the handset  
to the Bluetooth® Hands-Free Phone System,  
Making a call from the phonebook  
1. Push the  
push the  
button on the steering wheel and  
button to select the “Phonebook” .  
push the  
button and confirm when prompted.  
If supported by the phone, the Bluetooth® Hands-Free  
Phone System allows for call waiting functionality. If a  
call is received while another call is already active, a  
message will be displayed on the screen. Push the  
button to hold the active call and switch to the  
2. Push the  
button on the steering wheel to  
button to select the person you  
button to accept the selection. The  
select the “List Names” .  
Outgoing Calls  
3. Push the  
wish to call.  
Select this command to list the last five outgoing  
calls from the vehicle. If the call was to an entry in  
the phoebook, the name will be displayed.  
Otherwise, the phone number of the outgoing call  
will be displayed. Select “Dial” to call the number.  
Select “Next Entry” or “Previous Entry” to move  
through the list of outgoing calls.  
4. Push the  
second call. Push the  
call.  
button to reject the second  
system acknowledges the selection and starts  
dialing.  
While the second call is active, pushing the  
button will allow the same commands that are available  
during any call as well as two additional commands:  
Receiving a call  
When a call is received by the phone connected to the  
vehicle’s Bluetooth® Hands-Free Phone System, the  
call information is displayed on either the vehicle  
information display or both the vehicle information  
display and the control panel display.  
.
.
Redial  
.
“Switch Call”  
Select this command to call the last number  
dialed.  
Select this command to hold the second call and  
switch back to the original call.  
Call Back  
.
“End Other Call”  
Select this command to call the number of the last  
incoming call to the vehicle.  
Push the  
button to reject the call.  
button to accept the call. Push the  
Select this command to stay with the second call  
and end the original call.  
Show Applications:  
Push the  
button to accept the call. Push the  
Select this command to display list of smartphone  
apps available.  
button to reject the call.  
4-50 Heater and air conditioner, and audio system  
Bluetooth® HANDS-FREE PHONE  
SYSTEM (Type C)  
*Type C is for models with navigation system.  
WARNING:  
.
.
.
Select Phone or Device  
Select to connect to  
phone from the displayed list.  
Ending a call  
To end an active call, push the  
a
previously connected  
button.  
Bluetooth® SETTINGS  
To access and adjust the settings for the Bluetooth®  
Hands-Free Phone System;  
Phonebook Download  
.
.
Use a phone after stopping your vehicle in a  
safe location. If you have to use a phone  
while driving, exercise extreme caution at all  
times so full attention may be given to  
vehicle operation.  
Select to turn on or off the automatic download of  
a connected phone’s phonebook.  
1. Push the ENTER/SETTING button.  
Show Incoming Calls  
Select “Driver Only” to have incoming call  
information displayed only in the vehicle informa-  
tion display. Select “Both” to have incoming call  
information displayed in both the vehicle informa-  
tion display and the center display screen.  
2. Use the TUNE FOLDER knob to select “Blue-  
tooth” and then push the ENTER/SETTING  
button.  
If you are unable to devote full attention to  
vehicle operation while talking on the  
phone, pull off the road to a safe location  
and stop your vehicle.  
Available setting items:  
.
.
.
Bluetooth  
Select “On” or “Off” to turn the vehicle’s Blue-  
tooth® system on or off.  
CAUTION:  
To avoid discharging the vehicle battery, use a  
phone after starting the engine.  
Add Phone or Device  
For operation to connect a phone to the system,  
see “Connecting procedure” (P.4-49).  
Your NISSAN is equipped with the Bluetooth® Hands-  
Free Phone System. If you have a compatible Blue-  
tooth® enabled cellular phone, you can set up the  
wireless connection between your cellular phone and  
the in-vehicle phone module. With Bluetooth® wireless  
technology, you can make or receive a hands-free  
telephone call with your cellular phone in the vehicle.  
Delete Phone or Device  
Select to delete a phone from the displayed list.  
The system will ask to confirm before deleting the  
phone.  
NOTE:  
When you delete a phone, the associated  
phonebook for the phone will also be  
deleted.  
Once your cellular phone is connected to the in-  
vehicle phone module, no other phone connecting  
procedure is required. Your phone is automatically  
reconnected with the in-vehicle phone module when  
the ignition switch is placed in the ON position with the  
connected cellular phone turned on and carried in the  
vehicle.  
You can register up to 5 different Bluetooth® cellular  
phones to the in-vehicle phone module. However, you  
can talk on only one cellular phone at a time.  
.
Replace Phone  
Select to replace a phone from the displayed list.  
When a selection is made, the system will ask to  
confirm before proceeding. The recorded phone-  
book for the phone being deleted will be saved as  
long as the new phone’s phonebook is the same  
as the old phone’s phonebook.  
Before using the Bluetooth® Hands-Free Phone  
System, refer to the following notes.  
Heater and air conditioner, and audio system 4-51  
Bluetooth® trademark  
.
Set up the wireless connection between a cellular  
phone and the in-vehicle phone module before  
using the Bluetooth® Hands-Free Phone System.  
Some Bluetooth® enabled cellular phones may not  
be recognized by the in-vehicle phone module.  
.
.
Refer to the cellular phone owner’s manual  
regarding the telephone charges, cellular phone  
antenna and body, etc.  
Bluetooth® is a trademark owned  
by Bluetooth SIG, Inc. and li-  
censed to Bosch.  
.
.
The signal strength display on the monitor will not  
coincide with the signal strength display of some  
cellular phones.  
CONTROL BUTTONS AND MICROPHONE  
Steering wheel switch:  
You will not be able to use a hands-free phone  
under the following conditions:  
REGULATORY INFORMATION  
For Mexico:  
— Your vehicle is outside of the cellular service  
area.  
— Your vehicle is in an area where it is difficult to  
receive cellular signal; such as in a tunnel, in an  
underground parking garage, near a tall build-  
ing or in a mountainous area.  
— Your cellular phone is locked to prevent it from  
being dialed.  
.
.
.
When the radio wave condition is not ideal or  
ambient sound is too loud, it may be difficult to  
hear the other person’s voice during a call.  
JVH1039X  
Immediately after the ignition switch is placed in  
the ON position, it may be impossible to receive a  
call for a short period of time.  
1.  
button  
JVH0851X  
While using the Bluetooth® Hands-Free Phone  
System, tilt up or down to manually control the  
phone system.  
Do not place the cellular phone in an area  
surrounded by metal or far away from the in-  
vehicle phone module to prevent tone quality  
degradation and wireless connection disruption.  
2.  
3.  
4.  
5.  
Volume control switch −/+  
PHONE SEND  
PHONE END  
Microphone  
button  
button  
.
.
While a cellular phone is connected through the  
Bluetooth® wireless connection, the battery power  
of the cellular phone may discharge quicker than  
usual. The Bluetooth® Hands-Free Phone System  
cannot charge cellular phones.  
Some cellular phones or other devices may cause  
interference or a buzzing noise to come from the  
audio system speakers. Storing the device in a  
different location may reduce or eliminate the  
noise.  
JVH0870X  
4-52 Heater and air conditioner, and audio system  
Instrument panel:  
NOTE:  
One shot call  
To scroll quickly through the list, touch the “A-Z”  
key in the upper right corner of the screen. Turn  
the ENTER/SETTING button to choose a letter or  
number and then push the ENTER/SETTING  
button. The list will move to the first entry that  
begins with that number or letter.  
To use the system faster, you may speak the second  
level commands with the main menu command on the  
main menu. For example, push the  
after the tone, say “Call Redial”.  
button and  
PAIRING PROCEDURE  
NOTE:  
MAKING A CALL  
The connecting procedure must be performed  
when the vehicle is stationary. If the vehicle  
starts moving during the procedure, the proce-  
dure will be cancelled.  
To make a call, follow the procedure below:  
1. Push the  
button on the control panel. The  
“Phone” screen will appear on the display.  
JVH0993X  
2. Select one of the following options to make a call:  
1. Push the SETUP button on the control panel.  
2. Select the “Telephone & Bluetooth” key.  
3. Select the “Pair New Device” key.  
1. Phone  
button  
.
.
.
.
“Contacts”: Select the name from an entry  
stored in the vehicle phonebook.  
2. SETUP button  
“Call Lists”: Select the name from the incom-  
ing, outgoing or missed.  
VOICE COMMANDS (for Mexico)  
4. Initiate the pairing process from the handset. The  
system will display the message asking if PIN is  
displayed on your Bluetooth® device. If the PIN is  
displayed on your Bluetooth® device, select “Yes”  
to complete the pairing process.  
For more information, see the Bluetooth® device’s  
Owner’s Manual.  
You can use voice commands to operate various  
Bluetooth® Hands-Free Phone System features using  
the Voice Recognition system. For more details, see  
“Voice Recognition system” (P.4-56).  
“Redial”: Dial the last outgoing call from the  
vehicle.  
“
”: Input the phone number manually using  
a keypad displayed on the screen. For informa-  
tion on how to use the touchscreen, see “How  
to use the touchscreen” in this section.  
While using the voice recognition system, tilt the  
switch up or down to manually control the phone  
system.  
RECEIVING A CALL  
When a call is placed to the connected phone, the  
display will change to phone mode.  
PHONEBOOK  
To access the vehicle phonebook:  
Voice prompt interrupt  
While using the voice recognition system, the system  
voice can be interrupted to allow the user to speak  
commands. While the system is speaking, push the  
button on the steering wheel. The system voice  
will stop and a tone will be heard. After the tone, speak  
desired command (displayed on the touchscreen).  
1. Push the  
button on the control panel.  
To accept the incoming call, take one of the following  
actions.  
2. Select the “Phonebook/Contacts” key.  
3. Choose the desired entry from the displayed list.  
.
.
Push the  
button on the steering wheel.  
” icon on the screen.  
4. The number of the entry will be displayed on the  
screen. Touch the number to initiate dialing.  
Touch the “  
To reject the incoming call, take one of the following  
actions.  
.
Push the  
button on the steering wheel.  
Heater and air conditioner, and audio system 4-53  
.
Touch the red phone “  
” icon on the screen.  
.
.
Delete Paired Device  
messaging feature. See “Text messaging (for  
Mexico)” (P.4-54).  
Select to delete a Bluetooth® device from a list of  
those devices connected/paired to the Bluetooth®  
Hands-Free Phone System.  
DURING A CALL  
While  
available on the screen:  
.
.
Show Incoming Text (Mexico only):  
a
call is active, the following options are  
Select “Driver” to have incoming text notifications  
shown in the vehicle information display. Select  
“Both” to have text notifications shown in both the  
vehicle information display and the center display  
screen. Select “Off” to turn off all text notifications.  
Bluetooth  
Select to toggle Bluetooth® on and off.  
.
.
.
“Handset”  
Select this option to switch control of the phone  
call over to the handset.  
TELEPHONE SETUP  
To access the phone settings screen:  
Auto Reply (Mexico only):  
“Mute Mic.”  
Select “On” to have the system automatically reply  
Select this option to mute the microphone. Select  
again to unmute the microphone.  
1. Push the SETUP button.  
to caller with  
a
predetermined text message.  
2. Touch the “Telephone & Bluetooth” key.  
3. Touch the “Telephone Setup” key.  
Available setting items:  
Select “Off” to turn off auto reply function.  
Red phone “  
” icon  
.
.
Auto Reply Message (Mexico only):  
Select to end the phone call.  
Select to indicate preferred message to be used  
when “Auto Reply” function is activated.  
ENDING A CALL  
To end a phone call, select the red phone “  
on the screen or push the  
wheel.  
.
Sort Phonebook By:  
” icon  
button on the steering  
Use Vehicles’s Signature (Mexico only):  
Select “First Name” or “Last Name” to choose  
how phonebook entries are alphabetically dis-  
played on the screen.  
Select “On” to have vehicle signature shown in  
outgoing text messages or “Off” to deactivate the  
function.  
Bluetooth® SETTINGS  
To access the Bluetooth® settings screen:  
.
From Phonebook/Use Phonebook from:  
.
Custom Text Messages (Mexico only):  
Select “Phone” to use the handset’s phonebook.  
Select “SIM” to use the phonebook on the SIM  
card. Select “Both” to use both sources.  
Select this option to select a custom message to  
edit. There are 4 customer message slots avail-  
able.  
1. Push the SETUP button.  
2. Touch the “Telephone & Bluetooth” key.  
Available setting items:  
.
.
.
Download Phonebook Now:  
Select to download the phonebook to the vehicle  
from the chosen source.  
TEXT MESSAGING (for Mexico)  
.
Telephone Setup  
Record name for Phonebook Entry (Mexico only):  
WARNING:  
See “Telephone setup” (P.4-54) for details.  
Pair New Device  
Select to record a name for a phonebook entry for  
use with the voice recognition system.  
.
.
.
Laws in some jurisdictions may restrict the  
use of “Text-to-Speech.” Check local regula-  
tions before using this feature.  
Select to pair a new Bluetooth® device to the  
Phone Notifications (Mexico only):  
Bluetooth® Hands-Free Phone System.  
Select “Driver” to have phone notifications shown  
in the vehicle information display. Select “Both” to  
have phone notifications shown in both the vehicle  
information display and the center display screen.  
.
Select Paired Device  
Laws in some jurisdictions may restrict the  
use of some of the applications and fea-  
tures, such as social networking and texting.  
Check local regulations for any require-  
ments.  
Select to choose a Bluetooth® device from a list of  
those devices paired to the Bluetooth® Hands-  
Free Phone System.  
.
Text Messaging (Mexico only):  
Select “On” or “Off” to activate or deactivate text  
4-54 Heater and air conditioner, and audio system  
.
.
Use the text messaging feature after stop-  
ping your vehicle in a safe location. If you  
have to use the feature while driving,  
exercise extreme caution at all times so full  
attention may be given to vehicle operation.  
tone:  
.
.
.
Read Text  
.
Speak this command to read the text message  
again.  
“Driving, can’t text”  
.
.
.
.
.
.
.
.
“Call me”  
“On my way”  
“Running late”  
“Okay”  
Previous Text  
Speak this command to move to the previous text  
message (if available).  
If you are unable to devote full attention to  
vehicle operation while using the text mes-  
saging feature, pull off the road to a safe  
location and stop your vehicle.  
Next Text  
“Yes”  
Speak this command to move to the next text  
message (if available).  
“No”  
“Where are you?”  
“When?”  
The system allows for the sending and receiving of text  
messages through the vehicle interface.  
NOTE:  
Text messages are only displayed if the vehicle  
speed is less than 8 km/h (5 MPH).  
To send one of the custom messages, say  
“Custom Messages”. If more than one custom  
message is stored, the system will prompt for the  
number of the desired custom message.  
NOTE:  
Text messages are only displayed if the vehicle  
speed is less than 8 km/h (5 MPH).  
Sending a text message  
Reading a received text message  
1. Push the  
button on the steering wheel.  
1. Push the  
button on the steering wheel.  
2. Say “Phone” after the tone.  
2. Say “Phone” after the tone.  
3. Say “Send Text” after the tone.  
3. Say “Read Text” after the tone.  
4. The system will provide  
a
list of available  
The text message, sender and delivery time are shown  
on the screen. Use the tuning switch to scroll through  
all text messages if more than one are available. Push  
commands in order to determine the recipient of  
the text message. Choose from the following:  
.
.
.
.
.
To (a name)  
the  
the  
button to exit the text message screen. Push  
button to access the following options for  
Enter Number  
Missed Calls  
Incoming Calls  
Outgoing Calls  
replying to the text message:  
.
Call Back  
Speak this command to call the sender of the text  
message using the Bluetooth® Hands-Free Phone  
System.  
For more information about these options, see  
“Voice commands” in this section.  
.
Send Text  
5. Once a recipient is chosen, the system prompts  
for which message to send. Nine predefined  
messages are available as well as three custom  
messages. To choose one of the predefined  
messages, speak one of the following after the  
Speak this command to send a text message  
response to the sender of the text message.  
Heater and air conditioner, and audio system 4-55  
VOICE RECOGNITION SYSTEM (if  
equipped)  
The Voice Recognition system allows hands-free  
operation of the systems equipped on this vehicle,  
such as the phone and navigation system.  
.
If you want to cancel the command or go back to  
the previous menu of commands, push the  
button. The system will announce: “Cancelling  
voice recognition” or “Go back” depending on the  
current menu level.  
SYSTEM FEATURES  
To operate the Voice Recognition system, push the  
button located on the steering wheel. When  
prompted, speak the command for the system you  
wish to activate. The command given is picked up by  
the microphone and performed when it is properly  
recognized. The Voice Recognition will provide a voice  
response as well as a message in the center display to  
inform you of the command results.  
.
.
Push the  
button on the instrument panel to  
move back through the menus displayed on the  
screen.  
If you want to adjust the volume of the voice  
feedback, use the volume control switches on the  
steering wheel or the Power/VOLUME dial on the  
instrument panel.  
JVH1040X  
USING THE SYSTEM  
Initialization  
When the ignition switch is in the ON position, the  
Voice Recognition system is initialized, which takes a  
few seconds. When completed, the system is ready to  
Operation on the control panel display:  
The Voice Recognition system can activate the  
following systems:  
The voice command screen can also be accessed  
using the control panel display  
.
.
.
.
Bluetooth® Hands-Free Phone System  
1. Push the INFO button on the control panel.  
2. Touch the “Voice Commands” key.  
Navigation  
accept voice commands. If the  
button is pushed  
Audio  
before the initialization completes, the system will  
announce that the system is not ready for voice  
recognition session.  
Operating tips  
To get the best performance out of the Voice  
Recognition system, observe the following:  
NissanConnect App smartphone integration  
For additional information on the navigation system,  
see the separate Navigation System Owner’s Manual.  
Giving voice commands  
.
Keep the interior of the vehicle as quiet as  
possible. Close the windows to eliminate the  
surrounding noises (traffic noises, vibration  
sounds, etc.), which may prevent the system from  
recognizing the voice commands correctly.  
How to say numbers  
1. Push the  
button.  
The Voice Recognition system requires a certain way  
to speak numbers in voice commands. Refer to the  
following examples.  
2. The system announces and prompts you to speak  
a command. A list of available commands is then  
spoken by the system.  
General rule: Either “zero” or “oh” can be used for “0”.  
.
Wait until  
a
tone sounds before speaking  
a
3. After the tone sounds and the face icon on the  
display changes, speak a command. Available  
commands are discussed later in this section.  
command. Otherwise, the command will not be  
received properly.  
Phone numbers  
Speak phone numbers according to the following  
example. For 1-800-662-6200, say dial number and  
then speak the phone number in any of the following  
formats:  
.
.
Start speaking a command within 3.5 seconds  
after the tone sounds.  
4. Voice and display feedback are provided when the  
command is accepted.  
Speak in a natural voice without pausing between  
words.  
.
If the command is not recognized, the system  
announces: “Command not recognized”. Repeat  
the command in a clear voice.  
.
“one eight oh oh six six two six two oh oh”  
4-56 Heater and air conditioner, and audio system  
.
.
“one eight hundred six six two six two oh oh”  
“one eight zero zero six six two six two oh oh”  
.
List Phonebook  
System (Type C)” (P.4-51).  
Navigation commands  
The following voice commands are available for the  
Navigation System:  
Starting with the first alphabetical entry in the  
vehicle phonebook, the system prompts for an  
additional command. Say “Dial” to call the number  
of the phonebook entry. Say “Send Text” to send a  
text message to the number of the phonebook  
entry. Say “Next Entry” to skip to the next  
alphabetical entry in the vehicle phonebook, where  
the same options will then be available.  
For the best voice recognition phone dialing results,  
say phone numbers as single digits. Also, full numbers  
can only be spoken for “800”. For example, you cannot  
say 555-6000 as “five five five six thousand”.  
.
.
.
.
.
.
Points of Interest (name)  
POI by Category  
Home  
VOICE COMMANDS  
Bluetooth® Hands-Free Phone System com-  
mands  
To access the Bluetooth® Hands-Free Phone System  
voice commands:  
Address Book  
.
Recent Calls  
Previous Destinations  
Cancel Route  
The system prompts for an additional command.  
Say “Missed Calls”, “Incoming Calls” or “Outgoing  
Calls” to display a list of such calls on the screen.  
For more information about these commands, see the  
separate Navigation System Owner’s Manual.  
1. Push the  
button.  
Speak the number of the entry displayed on the  
screen to dial that number or say “Next Page” to  
view entries on the next page (if available).  
2. Say “Call” and then  
a
name in the vehicle  
Audio commands  
To access the audio system voice commands:  
phonebook to call that entry. Otherwise, say  
“Phone” to access various phone commands.  
.
.
Redial  
1. Push the  
button.  
If the Bluetooth® has been set to “Off”, the system will  
Redials the last called number.  
Read Text  
ask if you wish to turn the Bluetooth® on.  
2. Say “Audio”.  
3. Speak a command from the following available  
commands:  
Reads an incoming text message. For more  
information about text messaging with the Blue-  
tooth® Hands-Free Phone System, see “Blue-  
tooth® Hands-Free Phone System (Type C)” (P.4-  
51).  
If no phone is connected to the system and the vehicle  
is stationary, the system will ask if you wish to connect  
a phone. Say “Yes” to connect a phone. All further  
Bluetooth® Hands-Free Phone System voice com-  
mands are only available if a phone is connected.  
If a phone is connected and Bluetooth® is set to “On”,  
the following voice commands are available:  
.
Play (AM, FM, etc.)  
Allows user to select radio band  
.
.
Tune AM (number)  
.
.
Send Text  
Allows user to tune directly to a desired AM  
frequency  
Sends a text message. For more information about  
text messaging with the Bluetooth® Hands-Free  
Phone System, see “Bluetooth® Hands-Free  
Phone System (Type C)” (P.4-51).  
.
Call (a name)  
Tune FM (number)  
Speak the name of the contact in which you are  
trying to call. System will confirm correct contact.  
Say “Dial” to initiate dialing.  
Allows user to tune directly to a desired FM  
frequency  
Select Phone  
The system prompts you to use manual controls to  
continue. Use manual controls to change the  
active phone from among the listed phones  
connected to the vehicle.  
.
.
.
Dial Number  
CD Track (number)  
Allows for up to 24 digits to be dialed. After the  
number is entered, say “Dial” to initiate dialing. Say  
“Correction” to correct the number entered. Say  
“Go Back” to return to the main menu.  
Allows user to select track to be played  
Play Song (name)  
For more information about the Bluetooth® Hands-Free  
Allows user to select song name to be played  
Phone System, see “Bluetooth® Hands-Free Phone  
Heater and air conditioner, and audio system 4-57  
.
.
Play Artist (name)  
TROUBLESHOOTING GUIDE  
Allows user to select artist to be played  
Play Album (name)  
The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow  
the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each  
solution in turn, starting with number one, until the problem is resolved.  
Allows user to select album name to be played  
For more information about the audio system, see  
“Audio system” (P.4-15).  
Symptom/error message  
Solution  
1.  
The system fails to recognize the  
command correctly.  
Ensure that the command format is valid. Use the “List Commands” or  
“What Can I Say?” command under the “Help” menu.  
My Apps commands  
2.  
3.  
Many Apps can be accessed using this voice  
command. See “NissanConnect App smartphone  
integration” (P.4-39) for more information.  
Speak clearly without pausing between words and at a level  
appropriate to the ambient noise level.  
Ensure that the ambient noise level is not excessive (for example, with  
the windows open or the defogger turned on).  
Help commands  
NOTE:  
If it is too noisy to use the phone, it is likely that voice  
The following voice commands can be spoken to have  
the system provide instructions and tips for using the  
Voice Recognition system.  
commands will not be recognized.  
4.  
If optional words of the command have been omitted, then the  
command should be tried with these in place.  
.
.
.
.
.
List Commands  
What Can I Say?  
General Help  
Quit  
Exit  
4-58 Heater and air conditioner, and audio system  

Related Topics

Safety precautions Center multi-function control panel Vehicle information and settings Rear view monitor Ventilators Heater and air conditioner Servicing air conditioner Audio system Bluetooth Hands-Free Phone System Voice Recognition system

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot