2010-2019 Nissan Juke SUV Heater and air conditioner, and audio system -> Rear view monitor User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Heater and air conditioner, and audio system -> Rear view monitor for Your Nissan Juke SUV First Generation (2010-2019)

REAR VIEW MONITOR (for the  
Middle East and Mexico)  
When the shift lever is shifted into the “R” (Reverse)  
position, the monitor display shows the view to the rear  
of the vehicle.  
.
Scroll Direction:  
Camera Settings:  
Adjusts the direction of the menu scroll. Choose  
either the up arrow or the down arrow.  
See “Adjusting screen (for models with navigation  
system)” (P.4-9) for details.  
The system is designed as an aid to the driver in  
detecting large stationary objects to help avoid  
damaging the vehicle. The system will not detect small  
objects below the bumper and may not detect objects  
close to the bumper or on the ground.  
Clock:  
Temperature Unit:  
Select the corresponding keys to adjust the settings.  
Select the temperature unit from 8C and 8F.  
.
.
.
Time Format:  
Touch Click:  
The time setting can be selected from 12 hour and  
24 hour formats.  
Turns the touchscreen click feature on or off. When  
turned on, a click sound will be heard every time a key  
on the screen is touched.  
WARNING:  
Date Format:  
The day, month and year display can be selected  
from five formats.  
Failure to follow the warnings and instructions  
for proper use of the rear view monitor could  
result in serious injury or death.  
Beep Tones:  
Turns the beep tones feature on or off. When turned  
on, a beep sound will be heard as a pop-up message  
appears on the screen.  
Clock Mode:  
Select the clock mode from Manual, Time Zone  
and Auto.  
.
The rear view camera is a convenience but it  
is not substitute for proper backing.  
a
Factory Settings:  
When “Manual” is selected, you can set the clock  
mode manually from the “Set Clock Manually”  
screen.  
Always turn your head and visually check  
that it is safe to reverse before doing so.  
Always back up slowly.  
Select this key to return all settings to default.  
Software Licenses:  
Select “Auto” to automatically maintain the time  
using GPS.  
.
Underneath the bumper and the corner  
areas of the bumper cannot be viewed on  
the rear view monitor because of its mon-  
itoring range limitation.  
Select this key to view software license information.  
.
Set Clock Manually:  
Mode (AM/PM), Hours, Minutes, Day, Month and  
Year can be set manually if “Manual” is selected in  
the Clock Mode setting.  
.
.
Objects viewed in the rear view monitor  
differ from actual distance because a wide-  
angle lens is used.  
.
.
Daylight Savings Time:  
Turns the daylight savings time on or off.  
Time Zone:  
Objects viewed in the rear view monitor  
appear visually opposite, just like ones  
viewed in the inside and outside rearview  
mirrors.  
Select the applicable time zone from the list.  
Language:  
.
.
Make sure that the back door is securely  
closed when backing up.  
Select a language to be displayed on the screen.  
Do not put anything on the rear view camera.  
The rear view camera is installed above the  
number plate.  
4-6 Heater and air conditioner, and audio system  
.
.
When washing the vehicle with high pres-  
sure water, be sure not to spray it around the  
camera. Otherwise, water may enter the  
camera unit causing water condensation on  
the lens, a malfunction, fire or an electric  
shock.  
.
.
The distance guide line and the vehicle width  
line should be used only as a reference  
when the vehicle is on a level paved surface.  
The distance viewed on the monitor is for  
reference only and may be different from the  
actual distance between the vehicle and  
displayed objects.  
DIFFERENCE BETWEEN PREDICTIVE AND  
ACTUAL DISTANCES  
Backing up on a steep uphill  
Do not strike the camera. It is a precision  
instrument. Otherwise, it may malfunction or  
When reversing the vehicle up a hill, objects  
viewed in the monitor are further than they  
appear. When reversing the vehicle down a  
hill, objects viewed in the monitor are closer  
than they appear. Use the inside mirror or  
glance over your shoulder to properly judge  
distances to other objects.  
cause damage resulting in  
electric shock.  
a
fire or an  
CAUTION:  
Do not scratch the camera lens when cleaning  
dirt or snow from the lens.  
The distance guide lines, which are displayed on the  
monitor, indicate the vehicle’s clearance and distance  
HOW TO READ DISPLAYED LINES  
A
between the obstacle and the bumper  
.
*
1
4
*
Displayed lines (  
to  
) indicate the distances  
*
between the obstacle and the bumper as follows:  
1
.
.
.
.
Red line  
: approx. 0.5 m (1.5 ft)  
*
2
Yellow line  
Green line  
Green line  
: approx. 1 m (3 ft)  
*
3
: approx. 2 m (7 ft)  
: approx. 3 m (10 ft)  
*
4
*
5
*
Vehicle width guide lines  
:
Indicate the vehicle width when backing up.  
SAA1978  
SAA2776  
When backing up the vehicle up a hill, the distance  
guide lines and the vehicle width guide lines are shown  
closer than the actual distance. For example, the  
A
WARNING:  
.
Use the displayed guide lines as a reference.  
The lines are highly affected by the number  
of occupants, fuel level, vehicle position,  
road condition and road grade. Always  
check with your eyes directly around the  
vehicle while reversing.  
display shows 1 m (3 ft) to the place  
, but the  
*
B
*
actual 1 m (3 ft) distance on the hill is the place  
.
Note that any object on the hill is further than it appears  
on the monitor.  
Heater and air conditioner, and audio system 4-7  
Backing up on a steep downhill  
Backing up near a projecting object  
Backing up behind a projecting object  
SAA1979  
JVH0232X  
SAA3475  
C
B
When backing up the vehicle down a hill, the distance  
guide lines and the vehicle width guide lines are shown  
further than the actual distance. For example, the  
A
The vehicle may seem to nearly clear the object in the  
display. However, the vehicle may hit the object if it  
projects over the actual backing up course.  
The position  
is shown further than the position  
*
*
C
in the display. However, the position  
the same distance as the position  
may hit the object when backing up to the position  
if the object projects over the actual backing up  
course.  
is actually at  
. The vehicle  
A
*
A
*
display shows 1 m (3 ft) to the place  
, but the  
*
*
B
*
actual 1 m (3 ft) distance on the hill is the place  
.
Note that any object on the hill is closer than it appears  
on the monitor.  
4-8 Heater and air conditioner, and audio system  
1
display on·off  
button  
.
HOW TO ADJUST THE SCREEN  
*
OPERATING TIPS  
Adjust brightness to the preferred setting using the  
.
When the shift lever is shifted to the “R” (Reverse)  
position, the monitor screen automatically  
changes to the rear view monitor mode.  
Adjusting screen (for models with navigation  
system)  
2
ENTER/Scroll dial  
.
*
Adjusting screen (for models without naviga-  
tion system)  
Operation with touch screen:  
1. Push the SETUP button.  
.
.
When the view is switched, the display images on  
the screen may be displayed with some delay.  
When the temperature is extremely high or low,  
the screen may not clearly display objects. This is  
not a malfunction.  
2. Select the “System” key.  
3. Select the “Camera Display Settings” key.  
4. Select the item you wish to adjust.  
.
.
When strong light is directly coming on the  
camera, objects may not be displayed clearly.  
This is not a malfunction.  
.
Display Mode:  
Adjusts to fit the level of lighting in the vehicle.  
Touch the “Display Mode” key to cycle through  
options of the mode (Day, Night and Auto).  
Vertical lines may be seen in objects on the  
screen. This is due to strong reflected light from  
the bumper. This is not a malfunction.  
.
.
.
Brightness:  
.
.
The screen may flicker under fluorescent light. This  
is not a malfunction.  
Adjusts the brightness of the display.  
Contrast:  
JVH0867X  
The colors of objects on the rear view monitor may  
differ somewhat from the actual color of objects.  
This is not a malfunction.  
2
1. Push the ENTER/SETTING button  
.
Adjusts the level of contrast.  
Color:  
*
1
2. Turn the TUNE FOLDER knob  
*
to highlight the  
“Brightness” or the “Contrast” key.  
Adjusts the level of the color.  
.
.
Objects on the monitor may not be clear in a dark  
environment. This is not a malfunction.  
2
.
*
3. Push the ENTER/SETTING button  
Operation with buttons:  
1
4. Adjust the level using the TUNE FOLDER knob  
*
If dirt, rain or snow accumulates on the camera,  
the rear view monitor may not display object  
clearly. Clean the camera.  
2
*
and then push the ENTER/SETTING button  
to  
apply the adjustment.  
.
Do not use alcohol, benzine, or thinner to clean the  
camera. This will cause discoloration. To clean the  
camera, wipe with a cloth dampened with diluted  
mild cleaning agent and then wipe with a dry cloth.  
NOTE:  
Do not adjust the Brightness or Contrast of the  
rear view monitor while the vehicle is moving.  
.
.
Do not damage the camera as the monitor screen  
may be adversely affected.  
Do not use wax on the camera window. Wipe off  
any wax with a clean cloth dampened with mild  
detergent diluted with water.  
JVH0984X  
To adjust the screen brightness when the rear view  
monitor is displayed, push the brightness control/  
Heater and air conditioner, and audio system 4-9  

Related Topics

Heater and air conditioner, and audio system
Safety precautions Center multi-function control panel Vehicle information and settings Ventilators Heater and air conditioner Servicing air conditioner Audio system Bluetooth Hands-Free Phone System Voice Recognition system

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot