.
.
“one eight hundred six six two six two oh oh”
“one eight zero zero six six two six two oh oh”
.
List Phonebook
System (Type C)” (P.4-51).
Navigation commands
The following voice commands are available for the
Navigation System:
Starting with the first alphabetical entry in the
vehicle phonebook, the system prompts for an
additional command. Say “Dial” to call the number
of the phonebook entry. Say “Send Text” to send a
text message to the number of the phonebook
entry. Say “Next Entry” to skip to the next
alphabetical entry in the vehicle phonebook, where
the same options will then be available.
For the best voice recognition phone dialing results,
say phone numbers as single digits. Also, full numbers
can only be spoken for “800”. For example, you cannot
say 555-6000 as “five five five six thousand”.
.
.
.
.
.
.
Points of Interest (name)
POI by Category
Home
VOICE COMMANDS
Bluetooth® Hands-Free Phone System com-
mands
To access the Bluetooth® Hands-Free Phone System
voice commands:
Address Book
.
Recent Calls
Previous Destinations
Cancel Route
The system prompts for an additional command.
Say “Missed Calls”, “Incoming Calls” or “Outgoing
Calls” to display a list of such calls on the screen.
For more information about these commands, see the
separate Navigation System Owner’s Manual.
1. Push the
button.
Speak the number of the entry displayed on the
screen to dial that number or say “Next Page” to
view entries on the next page (if available).
2. Say “Call” and then
a
name in the vehicle
Audio commands
To access the audio system voice commands:
phonebook to call that entry. Otherwise, say
“Phone” to access various phone commands.
.
.
Redial
1. Push the
button.
If the Bluetooth® has been set to “Off”, the system will
Redials the last called number.
Read Text
ask if you wish to turn the Bluetooth® on.
2. Say “Audio”.
3. Speak a command from the following available
commands:
Reads an incoming text message. For more
information about text messaging with the Blue-
tooth® Hands-Free Phone System, see “Blue-
tooth® Hands-Free Phone System (Type C)” (P.4-
51).
If no phone is connected to the system and the vehicle
is stationary, the system will ask if you wish to connect
a phone. Say “Yes” to connect a phone. All further
Bluetooth® Hands-Free Phone System voice com-
mands are only available if a phone is connected.
If a phone is connected and Bluetooth® is set to “On”,
the following voice commands are available:
.
Play (AM, FM, etc.)
Allows user to select radio band
.
.
Tune AM (number)
.
.
Send Text
Allows user to tune directly to a desired AM
frequency
Sends a text message. For more information about
text messaging with the Bluetooth® Hands-Free
Phone System, see “Bluetooth® Hands-Free
Phone System (Type C)” (P.4-51).
.
Call (a name)
Tune FM (number)
Speak the name of the contact in which you are
trying to call. System will confirm correct contact.
Say “Dial” to initiate dialing.
Allows user to tune directly to a desired FM
frequency
Select Phone
The system prompts you to use manual controls to
continue. Use manual controls to change the
active phone from among the listed phones
connected to the vehicle.
.
.
.
Dial Number
CD Track (number)
Allows for up to 24 digits to be dialed. After the
number is entered, say “Dial” to initiate dialing. Say
“Correction” to correct the number entered. Say
“Go Back” to return to the main menu.
Allows user to select track to be played
Play Song (name)
For more information about the Bluetooth® Hands-Free
Allows user to select song name to be played
Phone System, see “Bluetooth® Hands-Free Phone
Heater and air conditioner, and audio system 4-57
English 
