“OFF” or “LOCK” position.
Headlight beam
HEADLIGHT AIMING CONTROL (if
equipped)
Be sure to turn the headlight switch to the “OFF” or
“AUTO” position (if equipped) when you leave the
vehicle.
Manual type
Except for Korea:
When the headlight switch is in the
or
position while the engine is running, the lights will
automatically turn off after placing the ignition switch in
the “ACC”, “OFF” or “LOCK” position and opening the
driver’s side door (if equipped).
When the headlight switch remains in either the
JVI1164X
or
position after the lights automatically turn off,
Example
the lights will turn on when the ignition switch is placed
in the “ON” position or the engine is started.
To turn on the high beam, push the lever towards the
SIC2275
1
front position
.
*
For Korea:
To turn off the high beam, return the lever to the neutral
The headlight aiming control operates when the
ignition switch is in the “ON” position and the headlight
is on to allow the headlight axis to be adjusted
according to the driving condition.
When the headlight switch is in the
or
2
position
.
*
position while the ignition switch is in the “ON”
position, the lights will automatically turn off within a
period of time after the ignition switch has been placed
in the “OFF” position.
To flash the headlights, pull the lever towards the
. The headlights can be flashed
even when the headlights are not on.
3
*
rearmost position
When driving with no heavy load/luggage or driving on
a flat road, select the normal position “0”.
When the lever is pulled towards the rearmost position
When the headlight switch remains in the
or
3
after the ignition switch is placed in the “OFF” or
*
If the number of occupants and load/luggage in the
vehicle changes, the headlight axis may become higher
than normal.
position after the lights automatically turn off, the lights
will turn on when the ignition switch is placed in the
“ON” position.
“LOCK” position, the headlight will turn on and stay on
for 30 seconds. The lever can be pulled 4 times for up
to 2 minutes (for Korea).
If the vehicle is traveling on a hilly road, the headlights
may directly shine on the rearview and outside mirrors
of a vehicle ahead or the windshield of an oncoming
vehicle, which may obscure other drivers’ vision.
CAUTION:
Battery saver system
The light reminder chime will sound if the driver’s door
is opened while the following improper operations are
found:
Do not leave the lights on when the engine is not
running for extended periods of time to prevent
the battery from being discharged.
To adjust to the proper aiming height, turn the switch
accordingly. The higher the number, designated on the
switch, the lower the headlight axis.
.
The headlight switch is in either the
or
position, and the ignition switch in the “ACC”,
“OFF” or “LOCK” position.
Select the switch position by referring to the following
samples.
.
The headlight switch is in the “AUTO” position (if
equipped) and the front fog light (if equipped) is
turned on while the ignition switch is in the “ACC”,
Instruments and controls 2-25
English 
