Locking passengers’ windows:
the window as it is closing by the automatic function.
When the control unit detects an obstacle, the window
will be lowered immediately.
Automatic function
A
When the lock button
*
is pushed in, the
passengers’ windows cannot be operated.
Depending on the environment or driving conditions,
the auto-reverse function may activate if an impact or
load similar to something being caught in the window
occurs.
To cancel the passengers’ windows lock, push the lock
A
button
lock.
again to release the passengers’ window
*
Passenger’s window switch
If the window does not close automatically
If the power window automatic function (closing only)
does not operate properly, perform the following
procedure to initialize the power window system.
SIC4524
1. Place the ignition switch in the “ON” position.
2. Close the door.
The automatic function is available for the switch that
has an mark on its surface.
3. Open the window completely by operating the
power window switch.
The automatic function enables a window to fully open
or close without holding the switch down or up.
4. Pull the power window switch and hold it to close
the window, and then hold the switch more than 3
seconds after the window is closed completely.
To fully open the window, push the power window
switch down to the second detent and release the
switch. To fully close the window, pull the power
window switch up to the second detent and release
the switch. The switch does not have to be held during
window operation.
SIC4523
The passenger’s switch can control its corresponding
window.
5. Release the power window switch. Operate the
window by the automatic function to confirm the
initialization is complete.
When the passengers’ windows lock button on the
driver’s switch is pushed in, the passenger’s switch
cannot be operated.
If the power window automatic function does not
operate properly after performing the procedure above,
have your vehicle checked by a NISSAN dealer.
To stop the window open/close operation during the
automatic function, push down or pull up the switch in
opposite directions.
Auto-reverse function:
WARNING:
There is a small distance just before the closed
position which cannot be detected. Make sure
that all passengers have their hands, etc. inside
the vehicle before closing the windows.
The auto-reverse function enables
a
window to
automatically reverse when something is caught in
2-30 Instruments and controls
English 
