2010-2019 Nissan Juke SUV Instruments and controls -> Wiper and washer switch User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls -> Wiper and washer switch for Your Nissan Juke SUV First Generation (2010-2019)

WIPER AND WASHER SWITCH  
ignition switch is in the “ON” position.  
WARNING:  
Wiper operation  
The lever position “INT”  
intermittently. If equipped, the intermittent operation  
can be adjusted by turning the adjustment control  
In freezing temperatures, the washer fluid may  
freeze on the windshield and obscure your  
vision. Warm the windshield with the defogger  
before you wash the windshield.  
1
operates the wiper  
*
A
B
knob, (longer)  
or (shorter)  
.
*
*
2
*
The lever position “LO”  
speed.  
operates the wiper at low  
CAUTION:  
.
.
.
Do not operate the washer continuously for  
longer than 30 seconds.  
3
The lever position “HI”  
speed.  
operates the wiper at high  
*
JVI1010X  
JVI0271X  
JVI1141X  
Type B  
Type C  
Type D  
Do not operate the washer if the window  
washer fluid reservoir is empty.  
To stop the wiper operation, move the lever up to the  
“OFF” position.  
If the wiper operation is interrupted by snow  
or ice, the wiper may stop moving to protect  
its motor. If this occurs, turn the wiper switch  
to the “OFF” position and remove the snow  
or ice on and around the wiper arms. In  
approximately 1 minute, turn the switch on  
again to operate the wiper.  
4
*
The lever position “MIST”  
sweep. The lever automatically returns to its original  
position.  
operates the wiper one  
Pulling up the wiper arm:  
The wiper arm should be in the up position when  
replacing the wiper.  
Place the ignition switch in the “OFF” position from the  
“ON” position.  
WINDSHIELD WIPER AND WASHER  
SWITCH  
Within 1 minute after the ignition switch is placed in  
the “OFF” position, push up the lever  
(within 0.5 second) to pull up the wiper arm. The wiper  
operation stops in mid-operation and the wiper arm  
can be pulled up.  
4
*
twice quickly  
To return the wiper arm, place the wiper arm in the  
down position and operate the wiper switch once after  
placing the ignition switch to the “ON” position.  
CAUTION:  
Do not operate the windshield wiper while the  
wiper arm is pulled up. The wiper arm may be  
damaged.  
SIC3664  
Type A  
The windshield wiper and washer operate when the  
Instruments and controls 2-27  
DEFOGGER SWITCH  
Wiper operation  
Washer operation  
Turn the switch from the “OFF” position to operate the  
wiper.  
To operate the washer, pull the lever toward the back  
5
*
of the vehicle  
until the desired amount of washer  
fluid is spread on the windshield. The wiper will  
automatically operate several times.  
1
*
“INT” (intermittent) — intermittent operation (not  
adjustable)  
2
“ON” (low) — continuous low speed operation  
*
REAR WINDOW WIPER AND WASHER  
SWITCH  
Washer operation  
3
Push the switch forward  
to operate the washer.  
*
Then the wiper will also operate several times.  
SIC4520  
Type A  
SIC3666  
Type A  
SIC4519  
Type B  
The defogger switch operates when the ignition switch  
is in the “ON” position.  
The defogger is used to reduce the moisture, fog or  
frost on the rear window to improve the rear view.  
1
When the defogger switch  
is pushed, the indicator  
*
2
light  
illuminates and the rear window defogger  
*
operates for approximately 15 minutes. After the preset  
time has passed, the defogger will turn off automati-  
cally.  
SIC4076  
Type B  
The rear window wiper and washer operate when the  
ignition switch is in the “ON” position.  
To turn off manually, push the defogger switch again.  
2-28 Instruments and controls  

Related Topics

Popular Owner Manuals