2007-2012 Nissan X Trail SUV Display screen, heater and air conditioner, and audio system -> Around view monitor (if equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Display screen, heater and air conditioner, and audio system -> Around view monitor (if equipped) for Your Nissan X Trail SUV Second Generation (2007-2012)

(164,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
4-10 Display screen, heater and air conditioner, and audio system
OPERATING TIPS
T32A130827-4F7D57DD-7549-4CCF-8296-1AB785FE95AF
. When the shift lever is shifted to the “R” (Reverse)
position, the monitor screen automatically
changes to the RearView Monitor mode.
. When the view is switched, the display images on
the screen may be displayed with some delay.
. When the temperature is extremely high or low,
the screen may not clearly display objects. This is
not a malfunction.
. When strong light is directly coming on the
camera, objects may not be displayed clearly.
This is not a malfunction.
. Vertical lines may be seen in objects on the
screen. This is due to strong reflected light from
the bumper. This is not a malfunction.
. The screen may flicker under fluorescent light. This
is not a malfunction.
. The colors of objects on the RearView Monitor
may differ somewhat from the actual color of
objects. This is not a malfunction.
. Objects on the monitor may not be clear in a dark
environment. This is not a malfunction.
. If dirt, rain or snow accumulates on the camera,
the RearView Monitor may not display object
clearly. Clean the camera.
. Do not use alcohol, benzine, or thinner to clean the
camera. This will cause discoloration. To clean the
camera, wipe with a cloth dampened with diluted
mild cleaning agent and then wipe with a dry cloth.
. Do not damage the camera as the monitor screen
may be adversely affected.
. Do not use wax on the camera window. Wipe off
any wax with a clean cloth dampened with mild
detergent diluted with water.
T32A130827-ECEC19D2-1058-4FF9-9BB2-B72671D2617C
JVH0658X
Models with navigation system
JVH0648X
Models without navigation system
With the ignition switch in the ON position, push the
CAMERA button (models with navigation system)/
DISP button (models without navigation system) or
move the shift lever to the “R” (Reverse) position to
operate the Around View Monitor. The monitor displays
various views of the position of the vehicle.
Available views:
. Bird’s-eye View
The surrounding view of the vehicle.
. Front-side View
The view around and ahead of the front passen-
ger’s side wheel.
. Front View
The view to the front of the vehicle.
. Rear View
The view to the rear of the vehicle.
The system is designed as an aid to the driver in
situations such as slot parking or parallel parking.
JVH0730X
There are some areas where the system will not display
objects. When in the front or the rear view display, an
object below the bumper or on the ground may not be
displayed
*
1
. When in the bird’s-eye view, a tall
object near the seam of the camera detecting areas
will not appear in the monitor
*
2
.
AROUND VIEW MONITOR (if
equipped)
Condition: 'Except for China'/
(165,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
WARNING:
. The Around View Monitor is a convenient
feature but it is not a substitute for proper
vehicle operation beca use it has areas
where objects cannot be viewed. Always
look out the windows and check mirrors to
be sure that it is safe to move.
. The driver is always responsible for safety
during parking and other maneuvers.
. Do not use the Around View Monitor with
the outside mirror in the stored position, and
make sure that the back door is securely
closed when operating the vehicle using the
Around View Monitor.
. The distance between objects viewed on the
Around View Monitor differs from the actual
distance.
. The cameras are installed above the front
grille, the outside mirrors and above the rear
license plate. Do not put anything on the
cameras.
. When washing the vehicle with high-pres-
sure water, be sure not to spray it around the
cameras. Otherwise, water may enter the
camera unit causing water condensation on
the lens, a malfunction, fire or an electric
shock.
. Do not strike the cameras. They are preci-
sion instruments. Doing so could cause a
malfunction or cause damage resulting in a
fire or an electric shock.
CAUTION:
Clean the camera lens with soft cloth to keep it
free from dirt, snow, etc. Do not scratch the lens
when cleaning.
AVAILABLE VIEWS
T32A130827-19D269B1-F21D-4993-921A-1 CA8E91509E0
WARNING:
. The distance guide line and the vehicle width
line should be used as a reference only
when the vehicle is on a paved, level surface.
The distance viewed on the monitor is for
reference only and may be different than the
actual distance between the vehi cle and
displayed objects.
. Use the displayed lines and the bird’s-eye
view as a reference. The lines and the bird’s-
eye view are greatly affected by the number
of occupants, fuel level, vehicle position,
road condition and road grade.
. If the tires are replaced with different sized
tires, the predictive cour se line and the
bird’s-eye view may be displayed incorrectly.
. When driving the vehicle up a hill, objects
viewed in the monitor are further than they
appear. When driving the vehicle down a hill,
objects viewed in the monitor are closer
than they appear.
. Use the mirrors or actually look to properly
judge distances to other objects.
. The vehicle width and predictive course lines
are wider than the actual width and course.
Front and rear view
T32A130827-6CBBA572-C313-4A53-8D27-D42ADCCA7711
SAA1840
Front view
SAA1896
Rear view
Guiding lines, which indicate the vehicle width and
distances to objects with reference to the vehicle body
line
*
A
, are displayed on the monitor.
Distance guide lines:
Indicate distances from the vehicle body.
. Red line
*
1
: approx. 0.5 m (1.5 ft)
. Yellow line
*
2
: approx.1 m (3 ft)
. Green line
*
3
: approx. 2 m (7 ft)
. Green line
*
4
: approx. 3 m (10 ft)
Display screen, heater and air conditioner, and audio system 4-11
Condition: 'Except for China'/
(166,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
4-12 Display screen, heater and air conditioner, and audio system
Vehicle width guide lines
*
5
:
Indicate the vehicle width when backing up.
Predictive course lines
*
6
:
Indicate the predictive course when operating the
vehicle. The predictive course lines will be displayed
on the monitor when the steering wheel is turned. The
predictive course lines will move depending on how
much the steering wheel is turned and will not be
displayed while the steering wheel is in the straight
ahead position.
The front view will not be displayed when the vehicle
speed is above 10 km/h (6 MPH).
WARNING:
. The distance between objects viewed in the
rear view may differ from the actual dis-
tance. Objects in the rear view will appear
visually opposite from those viewed in the
inside and outside mirrors.
. On a snow-covered or slippery road, there
may be a difference between the predictive
course line and the actual course line.
. The displayed lines on the rear view will
appear slightly off to the right because the
rear view camera is not installed in the rear
center of the vehicle.
NOTE:
When the monitor displays the front view and
the steering wheel turns about 90 degrees or
less from the neutral position, both the right and
left predictive course lines
*
6
are displayed.
When the steering wheel turns about 90 degrees
or more, a predictive course line is displayed
only on the opposite side of the turn.
Bird’s-eye view
T32A130827-AE9DE01C-8974-4FEB-8647-1DE5ADA278A9
SAA1841
The bird’s-eye view shows the overhead view of the
vehicle which helps confirm the vehicle position and
the predicted course to a parking space.
The vehicle icon
*
1
shows the position of the vehicle.
Note that the distance between objects viewed in the
bird’s-eye view differs from the actual distance.
The areas that the cameras cannot cover
*
2
are
indicated in black.
After the ignition switch is placed in the “ON” position,
the nonviewable area
*
2
is highlighted in yellow for 3
seconds after the bird’s-eye view is displayed.
When the corner of the vehicle moves closer to an
object, the corner sensor (sonar) indicators
*
3
(if
equipped) appear. See “Parking sen sor (sonar)
system” (P.5-50) for more information.
WARNING:
. Objects in the bird’s-eye view will appear
further than the actual distance because the
bird’s-eye view is a pseudo view that is
processed by combining the views from the
cameras on the outside mirrors, the front
and the rear of the vehicle.
. Tall objects, such as a curb or vehicle, may
be misaligned or not displayed at the seam
of the views.
. Objects that are above the camera cannot be
displayed.
. The view for the bird’s-eye view may be
misaligned when the camera position alters.
. A line on the ground may be misaligned and
is not seen as being straight at the seam of
the views. The misalignment will increase as
the line proceeds away from the vehicle.
Front-side view
T32A130827-D8F5C67E-C456-4774-A30B -654D3801D304
SAA1842
Guiding lines:
Guiding lines that indicate the width and the front end
of the vehicle are displayed on the monitor.
The front-of-vehicle line
*
1
shows the front part of the
vehicle.
The side-of-vehicle line
*
2
shows the vehicle width
including the outside mirrors.
The extensions
*
3
of both the front
*
1
and side
*
2
lines are shown with a green dotted line.
The corner sensor (sonar) indicator
*
4
(if equipped)
Condition: 'Except for China'/
(167,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
will appear when a corner of the vehicle moves closer
to an object. The corner sensor (sonar) indicator
*
4
(if
equipped) can be turned off when the Front Sensor
setting is turned off on the vehicle information display.
See “Driver Assistance” (P.2-21).
CAUTION:
. Do not scratch the camera lens when clean-
ing dirt or snow.
. The turn signal light may overlap with the
side-of-vehicle line. This is not a malfunc-
tion.
DIFFERENCE BETWEEN PREDICTIVE AND
ACTUAL DISTANCES
T32A130827-42055C22-AE1D-42B9-8561-0C9EE445C1C9
Backing up on a steep uphill
T32A130827-66A8654F-ADC7-4C90-ACAF-FC1298C31F1C
JVH0207X
When backing up the vehicle up a hill, the distance
guide lines and the vehicle width guide lines are shown
closer than the actual distance. For example, the
display shows 1 m (3 ft) to the place
*
A
, but the
actual 1 m (3 ft) distance on the hill is the place
*
B
.
Note that any object on the hill is viewed in the monitor
further than it appears.
Backing up on a steep downhill
T32A130827-47F024B3-6908-4996-B8AD-96E8E0A7F0D1
JVH0208X
When backing up the vehicle down a hill, the distance
guide lines and the vehicle width guide lines are shown
further than the actual distance. For example, the
display shows 1 m (3 ft) to the place
*
A
, but the
actual 1 m (3 ft) distance on the hill is the place
*
B
.
Note that any object on the hill is viewed in the monitor
closer than it appears.
Display screen, heater and air conditioner, and audio system 4-13
Condition: 'Except for China'/
(168,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
4-14 Display screen, heater and air conditioner, and audio system
Backing up near a projecting object
T32A130827-867BF6E1-C394-4A5A-936A-1AD3EEC43754
JVH0787X
The predictive course lines
*
A
do not touch the
object on the display. However, the vehicle may hit the
object if it projects over the actual moving course.
Backing up behind a projecting object
T32A130827-E64CACE3-4298-4B84-A68D -C3D18BD6B2B1
JVH0211X
The position
*
C
is shown further than the position
*
B
in the display. However, the position
*
C
is actually at
the same distance as the position
*
A
. The vehicle
may hit the object when backing up to the position
*
A
if the object projects over the actual moving course.
HOW TO SWITCH THE DISPLAY
GUID-A747F8AB-E123-4197-9C40-C3B79985AC40
JVH0874X
With the ignition switch in the “ON” position, push the
CAMERA/DISP button or move the shift lever to the
“R” (Reverse) position to operate the Around View
Monitor.
The Around View Monitor can display two split views.
If the shift lever is not in the “R” (Reverse) position, the
available views are:
. Front view/bird’s-eye view split screen
. Front view/front-side view split screen
If the shift lever is in the “R” (Reverse) position, the
available views are:
. Rear view/bird’s-eye view split screen
. Rear view/front-side view split screen
. Rear view (if equipped)
The display automatically changes to the Around View
Monitor displaying front view/bird’s-eye view when:
. The shift lever is in the “D” (Drive) position (CVT
model) or the shift lever is out of the “R” (Reverse)
position (MT model), and the parking sensor
(sonar) (if equipped) detects that the vehicle is
approaching an object.
The display will switch back to the previously displayed
Condition: 'Except for China'/
(169,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
screen from the Around View Monitor screen when:
. The shift lever is in the “D” (Drive) position (CVT
model) or the shift lever is out of the “R” (Reverse)
position (MT model), and the vehicle speed
increases above approximately 10 km/h (6 MPH).
. A different screen is selected.
CAMERA AIDING CORNER SENSOR
FUNCTION (if equipped)
GUID-0AEEE377-4208-4A32-97B6-730A3A056470
When the corner of the vehicle moves closer to the
object while the Around View Monitor is displayed, an
indicator is displayed and a tone is sounded by the
corner sensor function to warn the driver.
The color of the corner sensor indicator and the
pattern of the tone vary according to the distance to
the object.
Keep the corner sensors (located on the front and rear
b umper fa scia) free from snow, ice and large
accumulations of dirt. Do not clean the sensors with
sharp objects. If the sensors are covered, the accuracy
of the corner sensor function will be diminished.
The tone sound and the sensor indicator display can
be turn on/off, and the volume of the tone sound and
the sensor detection range can be adjusted. (See
“Driver Assistance” (P.2-21).)
WARNING:
. The corner sensor function is not designed
to prevent the object.
. The colors of the corner sensor indicator and
the distance guide lines in the front/rear
view indicate different dis tances to the
object.
. Inclement weather may affect the function of
the corner sensor system; this may include
reduced performance or a false activation.
. This function is designed as an aid to the
driver in detecting large stationary objects to
help avoid damaging the vehicle. The system
will not detect small objects below the
bumper, and may not detect objects that
are too close to the bumpe r or on the
ground.
. If your vehicle sustains damage to the
bumper fascia, leaving it misaligned or bent,
the sensing zone may be altered causing
ina ccurate measurement of o bstacles or
false alarms.
CAUTION:
Keep the interior of the vehicle as quiet as
possible to hear the tone clearly.
MOVING OBJECT DETECTION (MOD)
FUNCTION (if equipped)
GUID-6CAFFD96-0FA6-42CB-8531-35613FD16A94
The Moving Object Detection (MOD) system can
inform the driver of moving objects when driving out of
garages, maneuvering into parking lots and in other
such instances.
The MOD system detects moving objects by using
image processing technology on the image shown on
the display. The rear view camera is equipped with the
automatic washer function using window washer fluid.
The MOD system operates in the following conditions
when the camera view is displayed:
. When the shift lever is in the “P” (Park) or “N”
(Neutral) position (CVT model) or the shift lever is
out of the “R” (Reverse) position (MT model) and
the vehicle is stopped, the MOD system detects
the moving objects in the bird’s-eye view. The
MOD system will not operate if the outside mirror
is moving in or out or if either door is opened.
. When the shift lever is in the “D” (Drive) position
(CVT model) or the shift lever is out of the “R”
(Reverse) position (MT model), and the vehicle
speed is below approximately 8 km/h (5 MPH),
the MOD system detects moving objects in the
front view.
. When the shift lever is in the “R” (Reverse)
position and the vehicle speed is below approxi-
mately 8 km/h (5 MPH), the MOD system detects
moving objects in the rear view. The MOD system
will not operate if the back door is open.
The MOD system does not detect moving objects in
the front-side view. The MOD icon is not displayed on
the screen when in this view.
WARNING:
. The MOD system is not a substitute for
proper vehicle operation and does not pre-
vent contact with the objects surrounding
the vehicle. When maneuvering, always use
the outside mirror and inside rearview mirror
and turn and look to check the surroundings
to make sure it is safe to maneuver.
. The system is deactivated at speeds above
10 km/h (6 MPH). It is reactivated at lower
speeds.
. The system is not designed to prevent
contact with all objects.
. The MOD system is not designed to detect
surrounding stationary objects.
When the MOD system detects a moving object
surrounding the vehicle, the ye llow frame will be
displayed on the view where the objects are detected
Display screen, heater and air conditioner, and audio system 4-15
Condition: 'Except for China'/
(170,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
4-16 Display screen, heater and air conditioner, and audio system
and a chime will sound once. While the MOD system
continues to detect moving objects, the yellow frame
continues to be displayed.
JVH0872X
bird’s-eye view
JVH0873X
front view / rear view
In the bird’s-eye view, the yellow frame
*
1
is
displayed on each camera image (front, rear, right,
left) depending on where moving objects are detected.
The yellow frame
*
2
is displayed on view in the front
view or rear view modes.
While the sensor is beeping, the MOD system does
not chime.
The MOD icon
*
3
is displayed in blue in the view
where the MOD system is operative. The MOD icon
*
3
is displayed in gray in the view where the MOD
system is not operative.
If the MOD system is turned off, the MOD icon
*
3
is
not displayed.
The MOD system will activate automatically under the
following conditions:
. When the shift lever is in the “R” (Reverse)
position.
. When the CAMERA/DISP button is pushed to
switch from a different screen to the camera view
on the display.
. When vehicle speed decreases below approxi-
mately 8 km/h (5 MPH).
. When the ignition switch is placed in the “OFF”
position and then back to the “ON” position.
The MOD system can be set to remain inactive in the
vehicle information display. (See “Driver Assistance”
(P.2-21).)
WARNING:
. Excessive noise (for example, audio system
volume or open vehicle window) will inter-
fere with the chime sound, and it may not be
heard.
. The MOD system performance will be lim-
ited according to environmental conditions
and surrounding objects such as:
— When t here is low contras t between
background and the moving objects.
— When there is blinking source of light.
— When strong ligh t such as another
vehicle’s headlight or sunlight is pre-
sent.
— When there is dirt, water drops or snow
on the camera lens.
— When the position of the moving objects
in the display is not changed.
. The MOD system might detect flowing water
droplets on the camera lens, white smoke
from the muffler, moving shadows, etc.
. The MOD system may not function properly
depending on the speed, direction, distance
or shape of the moving objects.
. If your vehicle sustains damage to the parts
where the camera is installed, leaving it
misaligned or bent, the sensing zone may be
altered and the MOD system may not detect
objects properly.
. When the temperature is extremely high or
low, the screen may not disp lay objects
clearly. This is not a malfunction.
Turning the MOD system on or off
GUID-AA5B2549-6C8A-49E4-B448-E087C02404EF
The MOD system is turned on or off using the vehicle
information display. See “Driver Assistance” (P.2-21).
MOD malfunction
GUID-1ECC1104-D4DE-4EF2-996D-E9161CFDD1F3
When the orange MOD icon is displayed in the view,
the system is not functioning properly. This will not
hinder normal driving operation but the system should
be inspected by a NISSAN dealer.
Condition: 'Except for China'/
(171,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Camera maintenance
GUID-7A0DAC5C-4528-4068-A95F-D3E26A2A8BFA
If dirt, rain or snow accumulates on the camera, the
MOD system may not operate properly. Clean the
camera.
The camera washer operates automatically when dirt is
detected on the camera during driving. The washer
then stops operation after a period of time.
PARK ASSIST (PA) (if equipped)
GUID-E640D1F9-8120-4679-81C7-8BB968C41799
Park Assist (PA) is designed to assist drivers with
parallel and perpendicular parking.
This system will operate the steering wheel to park the
vehicle in the parking space set by the driver on the
bird’s-eye view screen (perpendicular mode), or
measured by parking sensors (sonar) in the left/right
side of the front bumper (parallel mode). Screen
guidance for the shift lever operation is also provided
during the parking maneuvers.
WARNING:
. PA is designed to support the driver’s
steering wheel operation in a parking lot. It
does not automatically lower the vehicle
speed or avo id contact with objects. As
when performing ordinary parking maneu-
vers, always look out the windows and check
with your own eyes to be sure that the
surrounding and road conditions are safe for
the maneuvers before operating the vehicle.
Operate the vehicle slowly during the park-
ing maneuvers. If the vehicle gets close to
people or objects near the vehicle, avoid
making contact by using the brakes and
performing other maneuvers.
. Do not touch the spoke of the steering
wheel while the PA is operating. It could
cause injuries to hands or fingers. Keep
neckties, scarves. etc. away from the steer-
ing wheel since they may get entangled and
cause unexpected accidents.
Parallel parking
GUID-BA40D95E-DF24-468C-8462-B48990009BD2
Displayed keys and icons:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVH1017X
JVH1016X
JVH1021X
*
1
:
Touch this key to activate the PA system.
*
2
:
The green PA icon indicates that the PA is
operating.
*
3
Cancel:
Touch this key to cancel the PA operation.
*
4
:
Touch this key to select perpendicular mode.
*
5
:
Indicates that an automated steering control is
operating.
Display screen, heater and air conditioner, and audio system 4-17
Condition: 'Except for China'/
(172,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
4-18 Display screen, heater and air conditioner, and audio system
Parallel parking operation
GUID-F5F18295-2B4D-4783-9CE4-840B910D1FBF
JVH0835X
*
1
Starting the system:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVH1013X
. Drive forward at reduced speed.
. Push the CAMERA button, and touch
on the
display.
NOTE:
. At a vehicle speed over 30 km/h (19 MPH),
the system will close and the display will
disappear.
. If the bird’s-eye view is not displayed on the
front passenger side of the screen, push the
CAMERA button until the bird’s-eye view is
displayed.
. At a vehicle speed over 10 km/h (6 MPH), the
camera view will not display.
. Parallel parking mode is selected by default.
*
2
Finding a parking space:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVH1014X
. Slowly move the vehicle forward, and the system
will search for a parking space.
. The system will indicate that a parking space has
been found.
NOTE:
. Use the turn signal switch to select the
preferred side for parking.
. The system cannot detect a parking space
that is not bordered by objects such as
vehicles.
*
3
Moving the vehicle forward:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Slowly move the vehicle forward further to the position
for backing up, and then stop the vehicle completely.
The system will provide guidance usi ng chime,
indicating that the vehicle has reached the proper
position for starting the automatic steering operation.
Condition: 'Except for China'/
(173,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
*
4
Moving the vehicle backward:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVH1018X
. Place the shift lever in the “R” (Reverse) position.
. Gently place hands on the steering wheel (the
steering wheel will be operated automatically) and
slowly move the vehicle in reverse into the parking
space by moderating the amount of pressure you
apply to the brake.
. Stop the vehicle completely when the vehicle
reaches the proper position to change the move-
ment direction. Then change the shift lever for
forward or rearward movement. Repetitions of this
operation may be required for aligning the vehicle
straight.
NOTE:
. Th e system will guide the vehicle to a
position where a direction change is re-
quired.
. A warning chime will sound when the vehicle
speed exceeds the speed limit for the PA
operation.
*
5
Finishing the parking operation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
When the vehicle is positioned in the parking space,
depress the brake and stop the vehicle. Touch the
“Cancel” key to terminate the PA system.
NOTE:
. Make any necessary adjustments manually
and make tur ns in reverse as requ ired.
Depending on the situation, shift lever
operations may be required several times
for maneuvering the vehicle into the parking
space.
. If the vehicle reaches the approximate area
of the target parking space found, a chime
will sound. A message indicating that the PA
operation is finishing will appear on the
display and the PA operation will terminate
automatically.
Deactivation of PA:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The PA will deactivate under the following conditions.
. When the steering wheel is operated manually.
. When the shift lever is placed in the “P” (Park)
position (CVT model).
. When 5 seconds have passed since the shift lever
was placed and kept in the “N” (Neutral) position.
. When the system judges that the conditions (such
as worn out or low pressure tires, road conditions,
etc.) are not suitable for correct course predic-
tions.
. When the vehicle speed exceeds approximately 7
km/h (4 MPH).
. When the parking operation by the driver deviates
from the PA guidance to some extent.
Perpendicular parking
GUID-E7156746-DD4F-443B-9031-2E1533D980A1
Displayed keys and icons:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVH1017X
JVH1023X
JVH1022X
Display screen, heater and air conditioner, and audio system 4-19
Condition: 'Except for China'/
(174,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
4-20 Display screen, heater and air conditioner, and audio system
*
1
:
Touch this key to activate the PA system.
*
2
Target parking rectangle (blue):
Indicates the target parking position.
*
3
:
The green PA icon indicates that the PA is
operating.
*
4
Cancel:
Touch this key to cancel the PA operation.
*
5
Start:
Touch this key to start the PA operation.
*
6
:
Touch this key to select the parallel mode.
*
7
:
Touch this key to adjust the location of the target
parking rectangle.
*
8
Clearance guidelines (red):
Indicates an approximate space required for
parking.
*
9
Reverse starting position rectangle (green):
Indicates a position at which to make a turn in
reverse.
*
10
:
Indicates that an automated steering control is
operating.
Perpendicular parking operation
GUID-0907D067-5711-4540-ADEB-3869CB21D193
JVH0840X
*
1
Starting the system and selecting parking
mode:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. Stop the vehicle near the space where you wish to
park.
2. Push the CAMERA button and touch
on the
display.
JVH1013X
NOTE:
If the bird’s-eye view is not displayed on the
front passenger side of the screen, push the
CAMERA button until the bird’s-eye view is
displayed.
3. Touch
to select the perpendicular parking
mode.
JVH1024X
Condition: 'Except for China'/
(175,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
*
2
Setting the target parking position and
starting the operation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVH1015X
1. Slowly move t he vehicle forward and stop
approximately 1 m (3 ft) beside the parking space.
Adjust the target parking rectangle (blue) position
by touching
.
NOTE:
.
Use the turn signal switch to select a
preferred side for parking.
.
The target parking rectangle needs to be
positioned near the actual parking space
before fine adjustments can be made by
touching
. The instructions for vehicle
movement during the adjustment are as
follows.
— Check the position of the lines and
rectangles with the actual parking space
on the screen while the vehicle is not in
motion.
— Move the vehicle at a low speed while
checking the surroundings for safety with
your own eyes.
— Stop the vehicle again to make sure
that the vehicle position is in the right
place.
.
Make sure that any objects are located
outside the clearance guidelines (red).
Otherwise, the vehicle may hit the objects
during the maneuvers. Refer to the fol-
lowing examples.
Example of perpendicular parking:
JVH0719X
*
1
: Good example
*
2
: Bad example
2. Touch the “Start” key on the screen.
The PA operation can be started when the
following conditions are met.
.
The vehicle is completely stopped.
.
The steering wheel is in the straight position.
.
The shift lever is in the positions for forward
movement, such as “D” (Drive) position (CVT
model) or “1” (1st) position (MT model).
*
3
Moving the vehicle forward:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVH1019X
. Gently place hands on the steering wheel (the
steering wheel will be operated automatically) and
slowly move the vehicle forward to the reverse
starting position rectangle (green) by moderating
the amount of pressure you apply to the brake.
. Stop the vehicle completely when the vehicle
reaches the reverse starting position rectangle
(green).
. Depress the brake pedal and stop the vehicle
completely when it approaches another vehicle or
object, or when the vehicle reaches the reverse
starting position.
NOTE:
A warning chime will sound when the vehicle
speed exceeds the speed lim it for the PA
operation.
Display screen, heater and air conditioner, and audio system 4-21
Condition: 'Except for China'/
(176,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
4-22 Display screen, heater and air conditioner, and audio system
*
4
Moving the vehicle backward:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVH1020X
. Place the shift lever in the “R” (Reverse) position.
. Gently place hands on the steering wheel (the
steering wheel will be operated automatically) and
slowly move the vehicle in reverse into the parking
space by moderating the amount of pressure you
apply to the brake.
*
5
Finishing the parking operation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
When the vehicle is positioned in the parking space,
depress on the brake and stop the vehicle. Touch the
“Cancel” key to terminate the PA system.
NOTE:
. Make any necessary adjustments manually
and make tur ns in reverse as requ ired.
Depending on the situation, shift lever
operations may be required several times
for maneuvering the vehicle into the parking
space.
. If the vehicle reaches the approximate area
of the target parking space, a chime will
sound. A message indicating that the PA
operation is ending will appe ar on the
display and the system will terminate auto-
matically.
Adjusting the target parking position:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVH1025X
When setting a target parking position, you can make a
fine adjustment of the target parking rectangle (blue)
position.
1. Touch
on the screen.
At parking lots with parking lines on the ground,
the PA system will search for the lines and make
fine adjustments automatically.
2. Touch the arrow on the screen for fine adjust-
men ts of the target parking rectangle (blue)
position.
Fine adjustments may be required at parking lots
without parking lines or when the automatic fine
adjustments using the parking lines do not work.
Make sure that any objects are located outside the
clearance guidelines (red).
Operating tips:
. When the target parking rectangle (blue) does not
fit in the actual parking space following the correct
procedure, check the surroundings and adjust the
location of your vehicle.
. Up to approximately 70 cm (27 in) of fine
adjustments can be made.
Deactivation of PA:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The PA will deactivate under the following conditions.
. When the steering wheel is operated manually.
. When the shift lever is placed in the “P” (Park)
position (CVT model).
. When 5 seconds have passed since the shift lever
was placed and kept in the “N” (Neutral) position.
. When reverse operations are conducted more
than 10 times for steering corrections.
. When the system judges that the conditions (such
as worn out or low pressure tires, road conditions,
etc.) are not suitable for correct course predic-
tions.
. When the vehicle backs up to a position behind
the place from which PA operation started.
. When the vehicle passes the reverse starting
position by over 2 m (7 ft).
. When the vehicle speed exceeds approximately 7
km/h (4 MPH).
. When the parking operation by the driver deviates
from the PA guidance to some extent.
Safety notes
GUID-6D40BBA6-4FA2-4E40-BEAB-A406F1C43A17
WARNING:
. Do not drive looking only at the screen. It
could cause unexpected accidents or cause
the vehicle to contact surrounding objects.
. When assistance from the PA is no longer
necessary, turn off the PA by touching the
Cancel key on the screen. If the PA remains
on, the steering wheel may operate auto-
matically and may cause unexpected acci-
dents.
Condition: 'Except for China'/
(177,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
. Make sure that there is enough space for
parking maneuvers before starting to use
the PA.
. Keep in mind that the front of the vehicle
may swing out to wards oncomi ng traffic
while the PA functions.
CAUTION:
Do not use the PA under the following condi-
tions.
. On unpaved roads.
. On slippery roads such as snow-covered or
frozen roads.
. On uneven roads with slants, bumps, curb-
stones, wheel tracks, etc.
. On curved roads.
. At mechanical parking facilities.
. Where parking or stopping is prohibited.
. When tire chains or a spare tire are installed.
. When the vehicle is being towed.
. When the doors (including the back door)
are not closed.
. When transporting a load that protrudes
from your vehicle.
. When the vehicle is laden with heavy loads.
NOTE:
. Under the conditions listed below, there may
be instances in which surrounding objects or
vehicles cut into the vehicle pathway, or
when the vehicle cannot be parked in the
correct spot following the PA operation, etc.
— When the shift lever is operated while
driving.
— When sudden start, sudden stop or
sudden operation of the shift lever oc-
curs.
— When the tire pressure is too low or the
tire is worn out.
— When tires are installed that are of a
different size from the ones that were
equipped at the time of factory shipment.
. When using the parallel parking mode, it is
not always possible for the system to find an
appropriate parking space and may indicate
parking spaces that are not suitab l e for
parking. Following are example conditions
for which the system may not find a parking
space correctly.
— Park ing spaces with objects located
above the height range of parking sen-
sors (sonars) (i.e., overhanging loads, tail
sections or loa ding ramps of goods
vehicles).
— Parking spaces that are partially occu-
pied by trailer drawbars.
— Parking spaces that are littered or over-
grown.
— Parking spaces where a curb exists
(causing damage of the wheels and tires).
— Parking spaces that are blocked by
foliage, grass, paving, blocks, etc.
— Parking spaces bordered by an obstacle
(i.e., a tree, a post or a trailer).
— Parking spaces with objects that absorb
ultrasonic waves such as fabric and snow.
— During snowfall or heavy rain.
— Near objects that emits ultrasonic waves
such as horns of other vehicle, noise from
a motorcycle engine and large automo-
bile air brake, or sensors of surrounding
vehicles.
— When the co ndi tions surrounding the
parking space change (i.e., another vehi-
cle enters the target parking space after
you pass it).
Operating tips:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
. The parking sensor (sonar) will automatically turn
on when the PA is activated. When the PA
operation ends, the status of the parking sensor
(sonar) will return to the mode that it was in before
the PA was activated.
. Depending on the situation, the shift lever opera-
tions may be required several times.
Malfunction:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
A warning message will be displayed and the system
will terminate operation when a malfunction is detected
in the PA.
When the warning message is displayed during the PA
operation, park the vehicle in a safe place and restart
the engine.
If the warning message is shown on the display
repeatedly or if the PA cannot be operated after
restarting the engine, this may indicate a system
malfunction. It should not hinder normal driving, but
the vehicle should be inspected by a NISSAN dealer.
Display screen, heater and air conditioner, and audio system 4-23
Condition: 'Except for China'/
(178,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
4-24 Display screen, heater and air conditioner, and audio system
Maintenance
GUID-1BAC6224-3866-47EB-B1C3-361B4F69845E
Refer to “Around view monitor” (P.4-10) for main-
tenance of the camera lens.
Blockages like dirt, ice, and objects such as stickers
and accessories installed within the detection range of
the parkin g sensor (sonar) may cause incorrect
function of the PA. Clean the sensors regularly with
care, and do not scratch or damage them.
JVH0916X
Parking sensors (sonar) are located on the bumpers: 6
on the front bumper and 4 on the rear bumper.
HOW TO ADJUST THE SCREEN
GUID-818DAAB9-9049-4E59-8622-4E833C2CFC8C
Adjusting screen (for models with navigation
system)
GUID-62022A5F-F9E8-4734-9FFC-3355CDF49BCA
Operation with touch screen:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. Push the SETUP button.
2. Select the “System” key.
3. Select the “Camera Display Settings” key.
4. Select the item you wish to adjust.
. Display Mode:
Adjusts to fit the level of lighting in the vehicle.
Touch the “Display Mode” key to cycle through
options of the mode (Day, Night and Auto).
. Brightness:
Adjusts the brightness of the display.
. Contrast:
Adjusts the level of contrast.
. Color:
Adjusts the level of the color.
Operation with buttons:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVH0649X
To adjust the screen brightness when the Around View
Monitor is displayed, push the display control/display
on·off “
” button
*
1
.
Adjust brightness to the preferred setting using the
ENTER/Scroll dial
*
2
.
Adjust screen (for models without navigation
system)
GUID-24EA2981-374F-43F8-AF7E-16E6099FDB6A
JVH0660X
To set up the Around View Monitor to your preferred
settings, push the ENTER/SETTING button
*
1
while
the Around View Monitor screen is displayed. Each
time the ENTER/SETTING button
*
1
is pushed, the
next setting item is selected. Turn the TUNE·FOLDER
dial
*
2
to adjust each item.
Available setting items:
. Brightness
. Contrast
The setting items will disappear and the display will
return to the original screen if ENTER/SETTING button
*
1
is pushed when the last setting item is selected or
if the screen is not operated for some time.
Choosing a language:
The warning message on the camera screen flashes
when the DISP button
*
3
is pushed and held for more
than 6 seconds. The language of the warning message
changes when the DISP button
*
3
is pushed again
Condition: 'Except for China'/

Related Topics

Display screen, heater and air conditioner, and audio system
Safety precautions Center multi-function control panel (models with navigation system) Vehicle information and settings (models with navigation system) RearView Monitor (if equipped) Ventilators Heater and air conditioner Audio system (if equipped) NissanConnect App smartphone integration (if equipped) Car phone or CB radio Bluetooth? Hands-Free Phone System (Type A) Bluetooth? Hands-Free Phone System (Type B) Bluetooth? Hands-Free Phone System (Type C) Bluetooth? Hands-Free Phone System (Type D) Voice Recognition system (if equipped)

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot