Get Display screen, heater and air conditioner, and audio system -> Audio system (if equipped) Guide for Nissan X Trail SUV Second Generation (2007-2012)

(189,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

Temperature control:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Turn the temperature control dial to set the desired

temperature.

. When the DUAL indicator light is not illuminated,

pushing the “DUAL” button (the indicator light will

turn on) allows the user to independently change

the driver and passenger side temperatures with

the corresponding temperature control dial.

. To cancel the separate temperature setting, push

the “DUAL” button (the indicator light will turn off)

and the driver’s side temperature setting will be

applied to both the driver and passenger sides.

Outside air circulation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To turn on the outside air circulation mode, push the air

recirculation “

” button. (The indicator light will turn

off.) The air flow is drawn from outside the vehicle.

Select the outside air circulation mode for normal

heating or air conditioning operation.

Air recirculation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the air recirculation “ ” button to circulate the

air flow inside the vehicle. (The indicator light will turn

on.)

SERVICING AIR CONDITIONER

T32A130827-02B6A735-AE1C-4FF1-853B-0711EFF486D2

WARNING:

The air conditioner system contains refrigerant

under high pressure. To avoid personal injury,

any air conditioner service should be done only

by an experienced technician with the proper

equipment.

The air conditioner system in your vehicle is charged

with a refrigerant designed with the environment in

mind.

This refrigerant will not harm the earth’s ozone

layer. However, it may contribute in a small part to

global warming.

Special charging equipment and lubricant are required

when servicing your vehicle’s air conditioner. Using

improper refrigerants or lubricants will cause severe

damage to the air co nditioner system. (Se e “Air

conditioner system refrigerant and lubricant” (P.9-5).)

A NISSAN dealer will be able to service your

environmentally friendly air conditioner system.

Air conditioner filter

T32A130827-BC1D1D75-3B43-4C79-840F-3711FA078F40

The air conditioner system is equipped with an air

conditioner filter. To make sure the air conditioner

heats, defogs, and ventilates efficiently, replace the

filter according the specified maintenance intervals

listed in a separate maintenance booklet. To replace

the filter, contact a NISSAN dealer.

The filter should be replaced if the air flow decreases

significantly or if windows fog up easily when operating

the heater or air conditioner.

T32A130827-CF902764-54DB-460C-9CCD-891B42007577

AUDIO OPERATION PRECAUTIONS

T32A130827-4E34C5BD-9452-4AC0-A824-D0DEB1BDEF8C

WARNING:

Do not adjust the audio system while driving so

that full attention may be giv en to vehicle

operation.

Radio

T32A130827-06011993-01E3-49CF-A636-2952299CE1E0

. Radio receptio n i s affected by station signal

strength, distance from radio transmitter, build-

ings, bridges, mou ntains and other external

influences. Intermittent changes in rece ption

quality normally are caused by these external

influences.

. Using a cellular phone in or near the vehicle may

influence radio reception quality.

. Some cellular phones or other devices may cause

interference or a buzzing noise to come from the

audio system speakers. Storing the device in a

different location may reduce or eliminate the

noise.

Compact Disc (CD) player

T32A130827-868CE57C-F62C-4BE4-8BE4-61333EF23B5F

. During cold weather or rainy days, the player may

malfunction due to the humidity. If this occurs,

remove the CD from CD player and dehumidify or

ventilate the player completely.

. The player may skip while driving on rough roads.

. The CD player sometimes may not function when

the passenger compartment temperature is ex-

tremely high. Lower the temperature before use.

. Do not expose the CD to direct sunlight.

. CDs that are of poor quality, or are dirty,

scratched, covered with fingerprints, or that have

pin holes may not work properly.

Display screen, heater and air conditioner, and audio system 4-35

AUDIO SYSTEM (if equipped)

Condition: 'Except for China'/

(190,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-36 Display screen, heater and air conditioner, and audio system

. The following CDs may not work properly.

— Copy control compact discs (CCCD)

— Recordable compact discs (CD-R)

— Rewritable compact discs (CD-RW)

SAA0480

. Do not use the following CDs as they may cause

the CD player to malfunction.

— 8 cm (3.1 in) discs

— CDs that are not round

— CDs with a paper label

— CDs that are warped, scratched or have

unusual edges.

. This audio system can only play prerecorded CDs.

It has no capabilities to record or burn CDs.

USB (Universal Serial Bus) connection port

T32A130827-06C0FD9D-6627-4E60-A7B7-A6F027D40F71

WARNING:

Do not connect, disconnect or operate the USB

device while driving. Doing so can be a distrac-

tion. If distracted you could lose control of your

vehicle and cause an accident or serious injury.

CAUTION:

. Do not force the USB device into the USB

port. Inserting the USB device tilted or up-

side-down into the port may damage the

port. Make sure that the USB device is

connected correctly into the USB port (Some

USB devices come with a

mark as a

guide. Make sure that the mark is facing the

correct direction before inserting the de-

vice.).

. Do not grab the USB port cover (if equipped)

when pulling the USB device out of the port.

This could damage the port and the cover.

. Do not leave the USB cable in a place where

it can be pulled unintentionally. Pulling the

cable may damage the port.

The vehicle is not equipped with a USB device. USB

devices should be purchased separately as necessary.

This system cannot be used to format USB devices. To

format a USB device, use a personal computer.

In some states/area, the USB device for the front seats

plays onl y sound without images for regulatory

reasons, even when the vehicle is parked.

This system supports various USB memory devices,

USB hard drives and iPod players. Some USB devices

may not be supported by this system.

. Partitioned USB devices may not be played

correctly.

. Some characters used in other languages (Chi-

nese, Japanese, etc.) are not displayed properly

on display. Using English language characters

with a USB device is recommended.

General notes for USB use:

Refer to your device manufacturer’s owner information

regarding the proper use and care of the device.

Notes for iPod use:

iPod is a trademark of Apple Inc., registered in the U.S.

and other countries.

. Improperly plugging in the iPod may cause a

checkmark to be displayed on and off (flickering).

Always make sure that the iPod is connected

properly.

. An iPod nano (1st Generation) may remain in fast

forward or rewind mode if it is connected during a

seek operation. In this case, please manually reset

the iPod.

. An iPod nano (2nd Generation) will continue to

fast-forward or rewind if it is disconnected during

a seek operation.

. An incorrect song title may appear when the Play

Mode is changed while using an iPod nano (2nd

Generation)

. Audiobooks may not play in the same order as

they appear on an iPod.

. Large video files cause slow responses in an iPod.

The vehicle center display may momentarily black

out, but will soon recover.

Condition: 'Except for China'/

(191,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

. If an iPod automatically selects large video files

while in the shuffle mode, the vehicle center

display may momentarily black out, but will soon

recover.

Bluetooth

Audio player (if equipped)

T32A130827-549739B3-2BF0-4594-A947-47F7D1823AB0

. Some Bluetooth

audio devices may not be used

with this system. For detailed information about

Bluetooth

audio devices that are available for use

with this system, contact a NISSAN dealer.

. Before using a Bluetooth

audio system, the initial

registration proc ess for the audio device is

necessary.

. Operation of the Bluetooth

audio system may

vary depending on the audio device that is

connected. Confirm the operation procedure

before use.

. The playback of Bluetooth

audio will be paused

under the following conditions. The playback will

be resumed after the following conditions are

completed.

— while using a hands-free phone

— while checking a connection with a cell phone

. The in-vehicle antenna for Bluetooth

commu-

nication is built in the system. Do not place the

Bluetooth

audio device in an area surrounded by

metal, far away from the system or in a narrow

space where the device closely contacts the body

or the seat. Otherwise, sound degradation or

connection interference may occur.

. While a Bluetooth

audio device is connected

through the Bluetooth

wireless connection, the

battery power of the device may discharge quicker

than usual.

. This system is compatible with the Bluetooth

profile (A2DP and AVRCP).

NOS1617

Bluetooth

is a trademark

owned by Bluetooth SIG, Inc.

and licensed to Visteon Cor-

poration and Bosch.

Compact Disc (CD)/USB device with MP3/

WMA

GUID-A4A92C8F-7274-403B-8631-6B6328139C4E

Terms:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

. MP3 — MP3 is short for Moving Pictures Experts

Group Audio Layer 3. MP3 is the most well known

compressed digital audio file format. This format

allows for near “CD quality” sound, but at a

fraction of the size of normal audio files. MP3

conversion of an audio track from CD can reduce

the file size by approximately 10:1 ratio (Sampling:

44.1 kHz, Bit rate: 128 kbps) with virtually no

perceptible loss in quality. MP3 compression

removes the redundant and irrelevant parts of a

sound signal that the human ear doesn’t hear.

. WMA — Windows Media Audio (WMA) is a

compressed audio format created by Microsoft as

an alternative to MP3. The WMA codec offers

greater file compression than the MP3 codec,

enabling storage of more digital audio tracks in the

same amount of space when compared to MP3s

at the same level of quality.

. Bit rate — Bit rate denotes the number of bits per

second used by a digital music files. The size and

quality of a compressed digital audio file is

determined by the bit rate used when encoding

the file.

. Sampling frequency — Sampling frequency is the

rate at which the samples of a signal are converted

from analog to digital (A/D conversion) per

second.

. Multisession — Multisession is one of the methods

for writing data to media. Writing data once to the

media is called a single session, and writing more

than once is called a multisession.

. ID3/WMA Tag — The ID3/WMA tag is the part of

the encoded MP3 or WMA file that contains

information about the digital music file such as

song title, artist, album title, encoding bit rate,

track time duration, etc. ID3 tag information is

displayed on the Album/Artist/Track title line on

the display.

* Windows

and Windows Media

are registered

trademarks and/or trademarks of Microsoft Corpora-

tion in the United States of America and/or other

countries.

Display screen, heater and air conditioner, and audio system 4-37

Condition: 'Except for China'/

(192,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-38 Display screen, heater and air conditioner, and audio system

Playback order:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

SAA2494

Music playback order of the CD with MP3/WMA is as

illustrated above.

. The folder names of folders not containing MP3/

WMA files are not shown in the display.

. If there is a file in the top level of the disc, “Root

Folder” is displayed.

. The playback order is the order in which the files

were written by the writing software, so the files

might not play in the desired order.

Condition: 'Except for China'/

(193,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

Specification chart (for CD player/Radio Type A and B):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Supported media

CD, CD-R, CD-RW, USB2.0

Supported file systems

ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet

* ISO9660 Level 3 (packet writing) is not supported.

* Files saved using the Live File System Component (on a Windows Vista-based computer)

are not supported.

Supported versions*1

MP3

Version

MPEG1, MPEG2, MPEG2.5

Sampling frequency

8 kHz - 48 kHz

Bit rate

32 kbps - 320 kbps, VBR*4

WMA*3

Version

WMA7, WMA8, WMA9 (except WMA9 Pro, WMA9 Lossless, WMA9 Voice)

Sampling frequency

32 kHz - 48 kHz

Bit rate

32 kbps - 192 kbps, VBR*4

Tag information (Song title and Artist name)

ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only)

WMA tag (WMA only)

Folder levels

Folder levels: 8, Folders:255 (including root folder), files: 512

Displayable character codes*2

01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE

(UTF-16 Non-BOM Big Endian), 05: UNICODE (UTF-8), 06: UNICODE (Non-UTF-16

BOM Little Endian)

*1 Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.

*2 Available codes depend on what kind of media, versions and information are going to be displayed.

*3 Protected WMA files (DRM) cannot be played.

*4 When VBR files are played, the playback time may not be displayed correctly. WMA7 and WMA8 are not applied to VBR.

Display screen, heater and air conditioner, and audio system 4-39

Condition: 'Except for China'/

(194,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-40 Display screen, heater and air conditioner, and audio system

Specification chart (for CD player/Radio Type C and D):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Supported media

CD, CD-R, CD-RW, USB2.0

Supported file systems

CD, CD-R, CD-RW: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet

* ISO9660 Level 3 (packet writing) is not supported.

* Files saved using the Live File System component (on a Windows Vista-based computer) are

not supported.

USB memory: FAT16, FAT32

Supported versions*1

MP3

Version

MPEG1 Audio Layer 3

Sampling frequency

32 kHz - 48 kHz

Bit rate

32 kbps - 320 kbps, VBR*4

WMA*2

Version

WMA7, WMA8, WMA9

Sampling frequency

32 kHz - 48 kHz

Bit rate

32 kbps - 192 kbps, VBR4, 32 kbps - 320 kbps (WMA9 only)

Tag information (Song title and Artist name)

ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only)

WMA tag (WMA only)

Folder levels

CD, CD-R, CD-RW Folder levels: 8, Folders: 255, Files: 999 (Max. 255 files for one folder)

USB

Folder levels: 8, Folders 255, Files: 2500 (Max. 255 files for one folder)

Memory size: 4GB

Displayable character codes*3

01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE (UTF-16

Non-BOM Big Endian), 05: UNICODE (UTF-8)

*1 Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.

*2 Protected WMA files (DRM) cannot be played.

*3 Available codes depend on what kind of media, versions and information are going to be displayed.

*4 When VBR files are played, the playback time may not be displayed correctly.

Condition: 'Except for China'/

(195,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

Specification chart (for CD player/Radio Type E):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Supported media

CD, CD-R, CD-RW, USB2.0

Supported file systems

ISO9660 LEVEL 1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet

*ISO9660 LEVEL 3 (packet writing) is not supported.

Supported

versions*1

MP3

Version

MPEG1, MPEG2, MPEG2.5

Sampling frequency

8 kHz - 48 kHz

Bit rate

8 kbps - 320 kbps, VBR

WMA*2

Version

WMA7, WMA8, WMA9

Sampling frequency

32 kHz - 48 kHz

Bit rate

48 kbps - 192 kbps, VBR

Tag information

ID3 tag VER1.0, VER1.1, VER2.2, VER2.3 (MP3 only)

Folder levels

Folder levels: 8, Max folders: 255 (including root folder), Files: 512 (Max. 255 files for one folder)

Displayable character codes*2

01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE (UTF-16 Non-BOM Big

Endian), 05: UNICODE (UTF-8), 06: UNICODE (Non-UTF-16 BOM Little Endian)

*1 Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.

*2 Available codes depend on what kind of media, versions and information are going to be displayed.

Display screen, heater and air conditioner, and audio system 4-41

Condition: 'Except for China'/

(196,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-42 Display screen, heater and air conditioner, and audio system

Troubleshooting guide:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Symptom

Cause and Countermeasure

Cannot play

Check if the disc was inserted correctly.

Check if the disc is scratched or dirty.

Check if there is condensation inside the player, and if there is, wait until the condensation is gone (about 1 hour) before using the

player.

If there is a temperature increase error, the CD player will play correctly after it returns to the normal temperature.

If there is a mixture of music CD files (CD-DA data) and MP3/WMA files on a CD, only the music CD files (CD-DA data) will be

played.

Files with extensions other than “.MP3”, “.WMA”, “.mp3” or “.wma” cannot be played. In addition, the character codes and number of

characters for folder names and file names should be in compliance with the specifications.

Check if the disc or the file is generated in an irregular format. This may occur depending on the variation or the setting of MP3/WMA

writing applications or other text editing applications.

Check if the finalization process, such as session close and disc close, is done for the disc.

Check if the disc is protected by copyright.

Poor sound quality

Check if the disc is scratched or dirty or if the bit rate may be too low.

It takes a relatively long time before

the music starts playing.

If there are many folder or file levels on the MP3/WMA disc or if it is a multisession disc, some time may be required before the music

starts playing.

Music cuts off or skips

The writing software and hardware combination might not match, or the writing speed, writing depth, writing width, etc., might not

match the specifications. Try using the slowest writing speed.

Skipping with high bit rate files

Skipping may occur with large quantities of data, such as for high bit rate data.

Move immediately to the next song

when playing.

When a non-MP3/WMA file has been given an extension of “.MP3”, “.WMA”, “.mp3” or “.wma”, or when play is prohibited by

The songs do not play back in the

desired order.

The playback order is the order in which the files were written by the writing software, so the files might not play in the desired order.

Condition: 'Except for China'/

(197,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

ANTENNA

T32A130827-5BB801AD-E395-4F8A-B057-3BC35BA60850

JVH0666X

Type A

JVH0905X

Type B

The antenna can be removed if necessary.

Hold the bottom of the antenna and remove by turning

counterclockwise.

To install the antenna, turn the antenna clockwise and

tighten.

CAUTION:

To avoid damaging or deforming the antenna, be

sure to remove the antenna under the following

conditions.

. The vehicle enters an automatic car wash.

. The vehicle enters a garage with a low

ceiling.

. The vehicle is covered with a car cover.

Display screen, heater and air conditioner, and audio system 4-43

Condition: 'Except for China'/

(198,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-44 Display screen, heater and air conditioner, and audio system

CD PLAYER/RADIO (Type A)

GUID-B21CAB82-872E-4BBE-A581-6C0DF8101A1E

JVH0830X

Models with TA button

1. DISP (Display) button

2. RADIO button

3. Day/Night button

4. TA button

5. Seek/track (rewind) button

6. Seek/track (fast forward) button

7. SETUP button

8. Back button

9. CD eject button

10. MEDIA button

11. Phone button

12. Power/VOL (Volume) dial

13. RPT (repeat) button

14. MIX button

15. Station memory buttons

16. A-Z button

17. MENU/ENTER dial

Condition: 'Except for China'/

(199,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

JVH0831X

Models without TA button

1. DISP (Display) button

2. RADIO button

3. Day/Night button

4. MIX button

5. Seek/track (rewind) button

6. Seek/track (fast forward) button

7. SETUP button

8. Back button

9. CD eject button

10. MEDIA button

11. Phone button

12. Power/VOL (Volume) dial

13. RPT (repeat) button

14. Station memory buttons

15. A-Z button

16. MENU/ENTER dial

Anti-theft system (if equipped)

GUID-62FF74DB-014B-40D1-A135-3AC93D8FD1E2

Use of a 4-digit radio PIN (Personal Identification

Number) code, known only to the vehicle owner,

effectively reduces the possibility of the audio unit

being stolen. Without the PIN code the audio unit

cannot be activated.

If force is used to try and remove the audio unit, the

Anti-theft system activates and the audio unit is locked.

The only way to unlock the audio unit is to enter the

radio code number shown on an identification card

supplied with the vehicle documentation.

NOTE:

. The 4 digit radio code is shown on a card

that you received with your vehicle docu-

mentation.

. Contact a NISSAN dealer if you do lose the 4

digit radio code of the audio unit.

Unlocking the unit:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

If the battery supply to the vehicle is interrupted, the

audio unit will lock.

When the power is restored and the unit switched on,

the display will show “Radio Code” and it will be

unlocked when the codes have been entered correctly.

Unlocking procedure:

Read this section very carefully. It is important that the

instructions are followed precisely.

To unlock the audio unit, proceed as follows:

Display screen, heater and air conditioner, and audio system 4-45

Condition: 'Except for China'/

(200,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-46 Display screen, heater and air conditioner, and audio system

JVH0832X

1. Place the ignition switch in the “ACC” or “ON”

position.

2. “Ra dio Code” is displayed along with four

numerical zero digits.

3. Push preset

the number of times correspond-

ing with the first digit of the radio code.

For example, if the radio code is 5169: for the first

digit, “5”, push the preset

five times.

4. The second, third, and fourth digits of the radio

code must be entered in the same way, only now

using preset

, and

For example, push

once,

six times, and

nine times.

5. Push the MENU/ENTER dial

to confirm the

code. If you entered the code correctly the unit will

switch on.

6. If the code is entered incorrectly a notification

message “Incorrect Pin”, “Please re-enter Pin” and

the number of attempts left [Remaining Tries: xx]

will be shown.

After reading the message, push the MENU/ENTER

dial

to return to the entry screen and enter the

correct radio code.

. If the wrong code is en tered after the third

attempt, the audio unit will lock for 60 minutes.

The display will show a count down timer from 60

to 0 (minutes). After 60 minutes enter the correct

radio code.

. If the wrong code is entered after eight sets of

three entries, the audio unit will lock permanently.

Contact a NISSAN dealer for further details.

Audio main operation

GUID-F79A1FBC-533D-4A46-B2A4-FFD862545661

The audio system operates when the ignition switch is

placed in the “ON” or “ACC” position.

Power/VOL dial:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Power ON/OFF:

To turn on the audio system, push the Power/VOL dial.

The system will turn on in the mode, which was used

immediately before the system was turned off.

To turn off the audio system, push the Power/VOL dial.

Volume control:

To control the volume, turn the Power/VOL dial.

Turn the Power/VOL dial clockwise to make the sound

louder.

Turn the Power/VOL dial counterclockwise to make the

sound quieter.

SETUP button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To configure Audio, Clock, Ra dio, or Language

settings, perform the following procedure:

1. Push the SETUP button.

2. Turn the MENU/ENTER dial, th e display wil l

appear in the following order:

Audio ? Clock ? Radio ? Language

3. Push the MENU/ENTER dial.

After the desired levels have been set, push the Back

button repeatedly or push the SETUP button.

Audio adjustments:

Turn the MENU/ENTER dial until the Audio is

displayed, and push the MENU/ENTER dial.

Each time the MENU/ENTER dial is pushed, the mode

will change as follows:

Sound ? AUX In? Speed Vol. ? Bass Boost ?

Audio Default

Turn the MENU/ENTER dial clockwise or counter-

clockwise to adjust the following items and push

MENU/ENTER dial to confirm.

. Sound menu

Bass:

Use this control to enhance or attenuate bass

response sound.

Treble:

Use this control to enhance or attenuate the

treble.

Bal. (Balance) :

Use this control to adjust the balance of the

volume between the left and right speakers.

Fade:

Use this control to adjust the balance of the

volume between the front and the rear speakers.

. AUX In menu

Use this control to adjust the volume output from

the auxiliary source.

. Speed Vol. (Volume) menu

This mode controls the volume output from the

speakers automatically in relation to vehicle speed.

Adjusting the setting to 0 (zero) turns off the

speed volume feature.

Condition: 'Except for China'/

(201,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

. Bass Boost menu

Turn on or off the Bass Boost feature which

emphasizes the lower audio frequencies.

. Audio Default menu

The audio unit has a saved preset settings as a

factory default. Select “Yes” to change all settings

back to the factory preset settings. Select “No” to

exit the menu keeping the current settings.

Clock setting:

Turn the MENU/ENTER dial until the Clock is

displayed, and push the MENU/ENTER dial.

Turn the MENU/ENTER dial, the mode will change as

follows:

Set Time ? ON/OFF ? Format

. Set Time

Select “Set Time” then adjust the clock as follows:

The hour display wil l start flashing. Turn the

MENU/ENTER dial to adjust the hour and push

the MENU/ENTER dial. The minute display will

start flashing. Turn the MENU/ENTER dial to

adjust the minute and push the MENU/ENTER

dial to finish the clock adjustment.

. ON/OFF

The clock display can be turned on and off. When

“ON” is selected, the clock will be displayed. (The

clock will keep being displayed even after the

power of the audio unit is turned off). When “OFF”

is selected, the clock will not be displayed.

. Format

Switch the clock display between 24-hour mode

and 12-hour clock mode.

Radio setting:

Turn the MENU/ENTER dial until the Radio is

displayed, and push the MENU/ENTER dial.

The FM station which can be received will be updated.

Language setting:

Turn the MENU/ENTER dial until the Language is

displayed, and push the MENU/ENTER dial.

Select the appropriate language and push the MENU/

ENTER dial. Upon completion, the screen will auto-

matically adapt the language setting.

Day/Night button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the Day/Ni ght button to switch the display

brightness between the daytime and nighttime modes.

The switches on the audio unit will also illuminate in the

nighttime mode.

Phone button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

For operation on how to use ph o n e button, see

“Bluetooth

Hands-Free Phone System (Typ e A)”

(P.4-78).

MEDIA button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the MEDIA button to play a compatible device

when it is connected.

Each time the MEDIA button is pushed, the audio

source will change as follows:

CD ? USB (iPod) ? AUX ? CD ? Bluetooth

The source that are not available will be skipped.

Radio operation

GUID-E12C8422-F711-4BA3-B55B-3FF594C6FD9F

Frequency range and step change:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To change the frequency range and step specification

of the radio, perform the following operations.

1. Turn on the audio system.

2. Push the RADIO button and select AM or FM

mode.

3. Push and hold the SETUP button for more than 3

seconds.

4. After the 3 seconds, keep holding the SETUP

button and turn the MENU/ENTER dial counter-

clockwise until you hear 3 clicks, clockwise until

you hear 3 clicks, and then counterclockwise until

you hear 3 clicks.

5. Turn the MENU/ENTER dial until “Region” is

highlighted, and push the MENU/ENTER dial.

6. Select an appropriate region from the following

options:

EUR

GOM Pacific

GOM S. America

7. To apply the setting, turn off the audio system,

place the ignition switch in the “OFF” position, and

then place the ignition switch back in the “ON”

position.

RADIO button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the RADIO button is pushed while the audio

system is off, the audio system will turn on and the

radio will turn on.

When the RADIO button is pushed while another

audio source is playing, the other audio source will turn

off and the radio will turn on.

Display screen, heater and air conditioner, and audio system 4-47

Condition: 'Except for China'/

(202,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-48 Display screen, heater and air conditioner, and audio system

To change the radio bands, push the RADIO button

until the desired band appears.

FM 1 ? FM 2 ? AM ? FM 1

When the RADIO button is pushed for more than 1.5

seconds, the six stations with the strongest signals are

stored in the preset (1 to 6) buttons of the band.

During the search, a notification message appears on

the display and the sound is muted until the operation

is complete. Once completed, the radio selects preset

button.

Seek/track buttons:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push or button briefly to manually change

the frequency.

To adjust the broadcasting station frequency auto-

matically, push and hold the

or button. When

the system detects a broadcasting station, it will stop

at the station.

Station memory buttons:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

During radio reception, pushing the station memory

button for less than 2 seconds will select the stored

radio station.

The audio system can store up to 12 FM station

frequencies (6 in each of FM 1 and FM 2 ) and 6 AM

station frequencies.

To store the station frequency manually:

1. Tune to the desired broadcasting station fre-

quency by using the Seek/track buttons.

2. Push and hold a station memory button

- &

until a beep sounds. (The radio mutes when the

memory button is pushed.)

3. The channel indicator will display and the radio

mute disengages, indicating that the memory is

stored properly.

4. Perform steps 1 - 3 for all other memory buttons.

If the battery cable is disconnected, or if the audio fuse

blows, the station memory will be erased. In such a

case, reset the desired stations.

Radio Data System (RDS) operation (if

equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The RDS is a system through which encoded digital

information is transmitted by FM radio stations in

addition to the normal FM radio broadcasting. The

RDS provides information services such as station

name, traffic information, or news.

NOTE:

In some countries or regions, some of these

services may not be available.

Alternative Frequency (AF) mode

The AF mode operates in the FM (radio) mode.

. The AF mode operates in the FM (radio), AUX or

CD mode (if FM was previously selected in the

radio mode).

. The AF function compares signal strengths and

selects the station with the optimum reception

conditions for the currently tuned-in station.

RDS functions

When an RDS station is tuned in with seek or manual

tuning, the RDS data is received and the Programme

Service (PS) name is displayed.

TA (Traffic announcement) button (if equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The TA functions are available in the mode of Radio

(FM) or any other audio source.

. Pushing the TA button selects the TA mode. The

TA indicator is displayed while TA mode is on.

. When TA button is pushed again. The mode will

be switched off and the TA indicator will disappear

from the display.

Traffic announcement interrupt function

When a traffic announcement is received, the an-

nouncement is tuned in and the display shows a

notification message with the radio station name.

Once the traffic announcement has finished, the unit

returns to the source that was active before the traffic

announcement started.

If TA button is pushed during a traffic announcement,

the traffic announcement interrupt mode is cancelled.

The TA mode returns to the standby mode and the

audio unit returns to the previous source.

CD player operation

GUID-A88BCE4A-E757-44BC-9108-D36196586FC6

Loading:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Insert a CD into the slot with the label side facing up.

The CD will be guided automatically into the slot and

will start playing. After loading the CD, the number of

tracks and the playtime will appear on the display.

CAUTION:

Do not force the CD into the slot. This could

damage the player.

Condition: 'Except for China'/

(203,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

NOTE:

. The CD player accepts normal audio CDs or

CDs containing MP3/WMA files.

. The audio unit will automatically detect if a

CD containing MP3/WMA files is inserted,

and “MP3CD” will be indicated.

. An error notification message will be dis-

played when inserting an incompatible disc

type (e.g. DVD), or if the player cannot read

the CD. Eject the disc and insert another

disc.

MEDIA button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To change to the CD mode, push the MEDIA button

with a CD inserted until the CD mode is selected.

List view:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

While the track is being played, push the MENU/

ENTER dial to display the available tracks in a listed

view mode. To select a track from the list, or a track to

start listening to, turn the MENU/ENTER dial then push

MENU/ENTER dial.

Quick search:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

In the list view mode, a quick search can be performed

to find a track from the list. Push the A-Z button, turn

the MENU/ENTER dial to the first alphabetic letter of

the song title and then push the MENU/ENTER dial.

When found, a list of the available songs will be

displayed. Select, and push the MENU/ENTER dial to

play the preferred track.

Seek/track button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push and hold the Seek/track button to fast forward or

rewind through the track. When the button is released,

the track will play at normal playing speed.

Track up/down:

Pushing the Seek/track button once, the track will skip

forward to the next track or backward to the beginning

of the current track. Push the Seek/track button more

than once to skip through the tracks.

Folder browsing:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

If the recorded media contains folders with music files,

pushing the Seek/track button will play in sequence

the tracks of each folder.

To select a preferred folder:

1. Push the MENU/ENTER dial or the Back button

and a list of tracks in the current folder is

displayed.

2. Push the Back button.

3. Turn the MENU/ENTER dial for the preferred

folder.

4. Push the MENU/ENTER dial to access the folder.

Push the MENU/ENTER dial again to start playing

the first track or turn the MENU/ENTER dial, and

push the MENU/ENTER dial to select another

track.

If the current selected folder contains sub folders, push

the MENU/ENTER dial, a new screen with a list of sub

folders will be displayed. Turn the MENU/ENTER dial

for the sub folder then push the MENU/ENTER dial to

select. Select the root folder item when songs are

recorded additionally in the root folder.

To return to the previous folder screen, push the Back

button.

RPT button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the RPT button and the current track will be

played continuously.

MIX button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the MIX button and all the tracks will be played in

a random order.

DISP button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

While a CD with recorded music information tags (CD-

text/ID3-text tags) is being played, the title of the

played track is displayed when available.

When the DISP button is pushed repeatedly, further

information about the track can be displayed along

with the track title as follows:

Track time ? Artist name ? Album title ? Track time

Track details:

Pushing and holding the DISP button will turn the

display into a detailed overview. Push the Back button

to return to the previous screen.

CD eject button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the CD eject button is pushed while the ignition

switch is placed in the “ON” or “ACC” position, the CD

will be ejected.

If a CD is ejected by pushing the CD eject button, and

it is not taken out from the loading slot within 20

seconds, the CD will automatically be reloaded to the

slot to protect the CD.

Display screen, heater and air conditioner, and audio system 4-49

Condition: 'Except for China'/

(204,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-50 Display screen, heater and air conditioner, and audio system

USB device player operation

GUID-DA76FC84-95B5-4BF4-8C53-9F7FC9D6F088

USB device main operation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The USB port is located on the lower part of the

instrument panel. See “USB (Universal Serial Bus)

connection port” (P.4-75). Connect a USB memory

device into the connector. The USB memory device

will be activated automatically.

Refer to your device manufacturer’s owner information

regarding the proper use and care of the device.

If the system has been turned off while the USB

memory device was playing, pushing the Power/VOL

dial will start the USB memory device.

The following operations are identical to the audio main

operation of the Compact Disc (CD) operation. For

details, see “CD player operation” (P.4-48).

. List view

. Quick search

(Seek/track)

. MIX (Random play)

. RPT (Repeat track)

. Folder browsing

MEDIA button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To operate the USB memory device, push the MEDIA

button repeatedly until the USB mode is selected.

DISP button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

While a track with recorded music information tags

(ID3-tags) is being played, the title of the played track

is displayed.

When the DISP button is pushed repeatedly, further

information about the track can be displayed along

with the track title as follows:

Track time ? Artist ? Album ? Track time

Track details:

Pushing and holding the DISP button will turn the

display into a detailed overview. Push the Back button

to return to the display for the main display mode.

iPod player operation

GUID-9E2C8C45-6ED0-427E-81FE-F6FCE10DE823

Connecting iPod:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The USB port is located on the lower part of the

instrument panel. See “USB (Universal Serial Bus)

connection port” (P.4-75).

When the iPod is connected to the vehicle, the iPod

music library can only be operated by the vehicle audio

controls.

* iPod and iPhone are a trademark of Apple Inc.,

registered in the U.S. and other countries.

Compatibility:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The system unit shall be compatible with all devices

(past and future) supporting Apple Accessory Protocol

on USB link.

It includes (and not limited to):

. iPod Generation 5 devices

. iPod Classic I and II (Generation 6 and 7)

. iTouch Generation OS 1, 2, 3, 4 and next

. iPhone Generation OS 1, 2, 3, 4 and next

. iPod Nano (1G, 2G, 3G)

. iPad 1, 2 and 3

NOTE:

This audio system do not support iPad charging.

MEDIA button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To operate the iPod, push the MEDIA button repeat-

edly until the USB (iPod) mode is selected and then

push the MENU/ENTER dial.

iPod main operation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Interface:

The interface for iPod operation shown on the audio

system display is similar to the iPod interface. Use the

MENU/ENTER dial to play a track on the iPod.

The following items can be chosen from the menu list

screen.

. Playlists

. Artists

. Albums

. Tracks

. More

For further information about each item, see the iPod

owner’s manual.

The following operations are identical to the audio main

operation of the Compact Disc (CD) operation. For

details, see “CD player operation” (P.4-48).

. List view

. Quick search

(Seek/track)

. MIX (Random play)

. RPT (Repeat track)

. Folder browsing

Condition: 'Except for China'/

(205,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

DISP button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

While a track with recorded music information tags

(ID3-tags) is being played, the title of the played track

is displayed.

When the DISP button is pushed repeatedly, further

information about the track can be displayed along

with the track title as follows:

Track time ? Artist ? Album ? Track time

Track details:

Pushing and holding the DISP button will turn the

display into a detailed overview. To return to the main

display, push the Back button.

Bluetooth

audio player operation

GUID-5497E9BF-9EFB-4B1A-806F-0653723247B5

Regulatory information:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Bluetooth

is a trademark owned

by Bluetooth SIG, Inc. and li-

censed to Visteon Corporation.

CE statement:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Hereby Visteon Corp. declares that this system is in

compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

NSY0105

NOTE:

The audio system only supports Blueto oth

devices with AVRCP (Audio Video Remote Con-

trol Profile) version 1.3, or 1.0 or earlier.

Bluetooth

audio player main operation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

JVH0848X

To play Bluetooth

audio, the Bluetooth

audio device

needs to be paired to the in-vehicle system. For the

pairing operation, see “Pairing device” (P.4-79).

MEDIA button:

To operate the Bluetooth

audio streaming use the

following method:

Push MEDIA button repeatedly until “BT Audio” is

shown.

The type of display,

, shown on the audio

system can vary depending on the Bluetooth

version

of the device.

Fast Forward (Cue), Fast Reverse

(Review) buttons:

When

(Cue) or (Review) button is pushed

continuously, the track will be played at high speed.

When the button is released, the track will be played at

normal playing speed.

Track up/down buttons:

Pushing

(Cue) or (Review) button once, the

track will be skipped forward to the next track or

backward to the beginning of the current played track.

Push

(Cue) or (Review) button more than

once to skip through the tracks.

DISP button:

If the song contains music information tags (ID3–

tags), the title of the played song will be displayed. If

tags are not provided then the display will not show

any messages.

When the DISP button is pushed repeatedly further

information about the song can be displayed along

with the song title.

A long push on DISP will turn the display into a

detailed overview which after a few seconds returns to

the main display; or push DISP briefly.

AUX device player operation

GUID-1933BA9C-B9D2-4E49-A89A-486BCD2A2870

The AUX jack is located on lower part of the instrument

panel. (See “AUX (auxiliary) input jack” (P.4-75).) The

AUX input jack accepts any standard analog audio

input such as from a portable cassette tape/CD player,

MP3 player or laptop computer.

NISSAN strongly recommends using a stereo mini

plug cable when connecting your music device to the

audio system. Music may not play properly when a

monaural cable is used.

Display screen, heater and air conditioner, and audio system 4-51

Condition: 'Except for China'/

(206,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-52 Display screen, heater and air conditioner, and audio system

MEDIA button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To switch to the AUX mode, push the MEDIA button

repeatedly until the AUX mode is selected.

CD PLAYER/RADIO (Type B)

GUID-F2BEFC9C-27AE-4153-918F-61105784C519

JVH0677X

1. DISP (Display) button

2. RADIO button

3. Day/Night button

4. MIX button

5. Seek/track (rewind) button

6. Seek/track (fast forward) button

7. SETUP button

8. Back button

9. CD eject button

10. MEDIA button

11. MUTE button

12. Power/VOL (Volume) dial

13. RPT (repeat) button

14. Station memory buttons

15. A-Z button

16. MENU/ENTER dial

Condition: 'Except for China'/

(207,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

Audio main operation

GUID-45281615-02D6-480C-88E3-B8CE80E354DE

The audio system operates when the ignition switch is

placed in the “ON” or “ACC” position.

Power/VOL dial:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Power ON/OFF:

To turn on the audio system, push the Power/VOL dial.

The system will turn on in the mode, which was used

immediately before the system was turned off.

To turn off the audio system, push the Power/VOL dial.

Volume control:

To control the volume, turn the Power/VOL dial.

Turn the Power/VOL dial clockwise to make the sound

louder.

Turn the Power/VOL dial counterclockwise to make the

sound quieter.

SETUP button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To configure Audio, Cl ock, Ra dio or Lan guage

settings, perform the following procedure:

1. Push the SETUP button.

2. Turn the MENU/ENTER dial, th e display wil l

appear in the following order:

Audio ? Clock ? Radio ? Language

3. Push the MENU/ENTER dial.

After the desired levels have been set, push the Back

button repeatedly or push the SETUP button.

Audio adjustments:

Turn the MENU/ENTER dial until the Audio is

displayed, and push the MENU/ENTER dial.

Each time the MENU/ENTER dial is pushed, the mode

will change as follows:

Sound ? AUX In? Speed Vol. ? Bass Boost ?

Audio Default

Turn the MENU/ENTER dial clockwise or counter-

clockwise to adjust the following items and push

MENU/ENTER dial to confirm.

. Sound menu

Bass:

Use this control to enhance or attenuate bass

response sound.

Treble:

Use this control to enhance or attenuate the

treble.

Bal.:

Use this control to adjust the balance of the

volume between the left and right speakers.

Fade:

Use this control to adjust the balance of the

volume between the front and the rear speakers.

. AUX In menu

Use this control to adjust the volume output from

the auxiliary source.

. Speed Vol. menu

This mode controls the volume output from the

speakers automatically in relation to vehicle speed.

Adjusting the setting to 0 (zero) turns off the

speed volume feature.

. Bass Boost menu

Turn on or off the Bass Boost feature which

emphasizes the lower audio frequencies.

. Audio Default menu

The audio unit has a saved preset settings as a

factory default. Select “Yes” to change all settings

back to the factory preset settings. Select “No” to

exit the menu keeping the current settings.

Clock setting:

Turn the MENU/ENTER dial until the Clock is

displayed, and push the MENU/ENTER dial.

Turn the MENU/ENTER dial, the mode will change as

follows:

Set Time ? ON/OFF ? Format

. Set Time

Select “Set Time” then adjust the clock as follows:

The hour display wil l start flashing. Turn the

MENU/ENTER dial to adjust the hour and push

the MENU/ENTER dial. The minute display will

start flashing. Turn the MENU/ENTER dial to

adjust the minute and push the MENU/ENTER

dial to finish the clock adjustment.

. ON/OFF

The clock display can be turned on and off. When

“ON” is selected, the clock will be displayed. (The

clock will keep being displayed even after the

power of the audio unit is turned off). When “OFF”

is selected, the clock will not be displayed.

. Format

Switch the clock display between 24-hour mode

and 12-hour clock mode.

Radio setting:

Turn the MENU/ENTER dial until the Radio is

displayed, and push the MENU/ENTER dial.

The FM station which can be received will be updated.

Language setting:

Turn the MENU/ENTER dial until the Language is

displayed, and push the MENU/ENTER dial.

Select the appropriate language and push the MENU/

ENTER dial. Upon completion, the screen will auto-

matically adapt the language setting.

Display screen, heater and air conditioner, and audio system 4-53

Condition: 'Except for China'/

(208,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-54 Display screen, heater and air conditioner, and audio system

Day/Night button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the Day/Ni ght button to switch the display

brightness between the daytime and nighttime modes.

The switches on the audio unit will also illuminate in the

nighttime mode.

MUTE button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the MUTE button to mute the audio system. Push

the button again to unmute.

MEDIA button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the MEDIA button to play a compatible device

when it is connected.

Each time the MEDIA button is pushed, the audio

source will change as follows:

CD ? USB/iPod ? AUX ? CD

The source that are not available will be skipped.

Radio operation

GUID-0043115D-7149-40FB-9AC0-68E93FF5DF24

The audio system operates when the ignition switch is

placed in the “ON” or “ACC” position.

RADIO button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the RADIO button is pushed while the audio

system is off, the audio system will turn on and the

radio will turn on.

When the RADIO button is pushed while another

audio source is playing, the other audio source will turn

off and the radio will turn on.

To change the radio bands, push the RADIO button

until the desired band appears.

FM 1 ? FM 2 ? AM ? FM 1

When the RADIO button is pushed for more than 1.5

seconds, the six stations with the strongest signals are

stored in the preset (1 to 6) buttons of the band.

During the search, a notification message appears on

the display and the sound is muted until the operation

is complete. Once completed, the radio selects preset

button.

Seek/track buttons:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push or button briefly to manually change

the frequency.

To adjust the broadcasting station frequency auto-

matically, push and hold the

or button. When

the system detects a broadcasting station, it will stop

at the station.

Station memory buttons:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

During radio reception, pushing the station memory

button for less than 2 seconds will select the stored

radio station.

The audio system can store up to 12 FM station

frequencies (6 in each of FM 1 and FM 2 ) and 6 AM

station frequencies.

To store the station frequency manually:

1. Tune to the desired broadcasting station fre-

quency by using the Seek/track buttons.

2. Push and hold a station memory button

- &

until a beep sounds. (The radio mutes when the

memory button is pushed.)

3. The channel indicator will display and the radio

mute disengages, indicating that the memory is

stored properly.

4. Perform steps 1 - 3 for all other memory buttons.

If the battery cable is disconnected, or if the audio fuse

blows, the station memory will be erased. In such a

case, reset the desired stations.

CD player operation

GUID-35DC47E5-5D9B-4A48-82BA-D602BFC603A6

The audio system operates when the ignition switch is

placed in the “ON” or “ACC” position.

Loading:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Insert a CD into the slot with the label side facing up.

The CD will be guided automatically into the slot and

will start playing. After loading the CD, the number of

tracks and the playtime will appear on the display.

CAUTION:

Do not force the CD into the slot. This could

damage the player.

NOTE:

. The CD player accepts normal audio CDs or

CDs containing MP3/WMA files.

. The audio unit will automatically detect if a

CD containing MP3/WMA files is inserted,

and “MP3CD” will be indicated.

. An error notification message will be dis-

played when inserting an incompatible disc

type (e.g. DVD), or if the player cannot read

the CD. Eject the disc and insert another

disc.

MEDIA button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To change to the CD mode, push the MEDIA button

with a CD inserted until the CD mode is selected.

Condition: 'Except for China'/

(209,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

List view:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

While the track is being played, push the MENU/

ENTER dial to display the available tracks in a listed

view mode. To select a track from the list, or a track to

start listening to, turn the MENU/ENTER dial then push

MENU/ENTER dial.

Quick search:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

In the list view mode, a quick search can be performed

to find a track from the list. Push the A-Z button, turn

the MENU/ENTER dial to the first alphabetic letter of

the song title and then push the MENU/ENTER dial.

When found, a list of the available songs will be

displayed. Select, and push the MENU/ENTER dial to

play the preferred track.

Seek/track button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push and hold the Seek/track button to fast forward or

rewind through the track. When the button is released,

the track will play at normal playing speed.

Track up/down:

Pushing the Seek/track button once, the track will skip

forward to the next track or backward to the beginning

of the current track. Push the Seek/track button more

than once to skip through the tracks.

Folder browsing:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

If the recorded media contains folders with music files,

pushing the Seek/track button will play in sequence

the tracks of each folder.

To select a preferred folder:

1. Push the MENU/ENTER dial or the Back button

and a list of tracks in the current folder is

displayed.

2. Push the Back button.

3. Turn the MENU/ENTER dial for the preferred

folder.

4. Push the MENU/ENTER dial to access the folder.

Push the MENU/ENTER dial again to start playing

the first track or turn the MENU/ENTER dial, and

push the MENU/ENTER dial to select another

track.

If the current selected folder contains sub folders, push

the MENU/ENTER dial, a new screen with a list of sub

folders will be displayed. Turn the MENU/ENTER dial

for the sub folder then push the MENU/ENTER dial to

select. Select the root folder item when songs are

recorded additionally in the root folder.

To return to the previous folder screen, push the Back

button.

RPT button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the RPT button and the current track will be

played continuously.

MIX button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the MIX button and all the tracks will be played in

a random order.

DISP button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

While a CD with recorded music information tags (CD-

text/ID3-text tags) is being played, the title of the

played track is displayed when available.

When the DISP button is pushed repeatedly, further

information about the track can be displayed along

with the track title as follows:

Track time ? Artist ? Album ? Track time

Track details:

Pushing and holding the DISP button will turn the

display into a detailed overview. Push the Back button

to return to the previous screen.

CD eject button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the CD eject button is pushed while the ignition

switch is placed in the “ON” or “ACC” position, the CD

will be ejected.

If a CD is ejected by pushing the CD eject button, and

it is not taken out from the loading slot within 20

seconds, the CD will automatically be reloaded to the

slot to protect the CD.

USB device player operation

GUID-02FA512F-947F-443E-9A07-73B7A3338822

USB device main operation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The USB outlet connector is located on the lower part

of the instrument panel. See “USB (Universal Serial

Bus) conn ection port” (P.4-75). Connect a USB

memory device into the connector. The USB memory

device will be activated automatically.

Refer to your device manufacturer’s owner information

regarding the proper use and care of the device.

If the system has been turned off while the USB

memory device was playing, pushing the Power/VOL

dial will start the USB memory device.

The following operations are identical to the audio main

operation of the Compact Disc (CD) operation. For

details, see “CD player operation” (P.4-54).

. List view

. Quick search

(Seek/track)

Display screen, heater and air conditioner, and audio system 4-55

Condition: 'Except for China'/

(210,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-56 Display screen, heater and air conditioner, and audio system

. MIX (Random play)

. RPT (Repeat track)

. Folder browsing

MEDIA button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To operate the USB memory device, push the MEDIA

button repeatedly until the USB mode is selected.

DISP button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

While a track with recorded music information tags

(ID3-tags) is being played, the title of the played track

is displayed.

When the DISP button is pushed repeatedly, further

information about the track can be displayed along

with the track title as follows:

Track time ? Artist ? Album ? Track time

Track details:

Pushing and holding the DISP button will turn the

display into a detailed overview. Push the Back button

to return to the display for the main display mode.

iPod player operation

GUID-A0812127-7C59-4DAA-895F-FFA7E8D7E9D0

Connecting iPod:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The USB outlet connector is located on the lower part

of the instrument panel. See “USB (Universal Serial

Bus) connection port” (P.4-75).

When the iPod is connected to the vehicle, the iPod

music library can only be operated by the vehicle audio

controls.

* iPod and iPhone are a trademark of Apple Inc.,

registered in the U.S. and other countries.

Compatibility:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The system unit shall be compatible with all devices

(past and future) supporting Apple Accessory Protocol

on USB link.

It includes (and not limited to):

. iPod Generation 5 devices

. iPod Classic I and II (Generation 6 and 7)

. iTouch Generaion OS 1, 2, 3, 4 and next

. iPhone Generation OS 1, 2, 3, 4 and next

. iPod Nano (1G, 2G, 3G)

. iPad 1, 2 and 3

NOTE:

This audio system do not support iPad charging.

MEDIA button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To operate the iPod, push the MEDIA button repeat-

edly until the USB/iPod mode is selected and then

push the MENU/ENTER dial.

iPod main operation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Interface:

The interface for iPod operation shown on the audio

system display is similar to the iPod interface. Use the

MENU/ENTER dial to play a track on the iPod.

The following items can be chosen from the menu list

screen.

. Playlists

. Artists

. Albums

. Tracks

. More

For further information about each item, see the iPod

owner’s manual.

The following operations are identical to the audio main

operation of the Compact Disc (CD) operation. For

details, see “CD player operation” (P.4-54).

. List view

. Quick search

(Seek/track)

. MIX (Random play)

. RPT (Repeat track)

. Folder browsing

DISP button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

While a track with recorded music information tags

(ID3-tags) is being played, the title of the played track

is displayed.

When the DIPS button is pushed repeatedly, further

information about the track can be displayed along

with the track title as follows:

Track time ? Artist ? Album ? Track time

Track details:

Pushing and holding the DISP button will turn the

display into a detailed overview. To return to the main

display, push the Back button.

AUX device player operation

GUID-DB831E91-671E-4F24-9950-A53279621578

The AUX jack is located on lower part of the instrument

panel. (See “AUX (auxiliary) input jack” (P.4-75).) The

AUX input jack accepts any standard analog audio

input such as from a portable cassette tape/CD player,

MP3 player or laptop computer.

NISSAN strongly recommends using a stereo mini

plug cable when connecting your music device to the

audio system. Music may not play properly when a

monaural cable is used.

Condition: 'Except for China'/

(211,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

MEDIA button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To switch to the AUX mode, push the MEDIA button

repeatedly until the AUX mode is selected.

CD PLAYER/RADIO (Type C)

T32A130827-0733A9C2-02B6-4AEA-972C-BBB86BE634E7

JVH0673X

1. MEDIA button

2. FM·AM button

3. CD eject button

4. CD button

5. DISP (display) button

6. Color display

7. Apps button

8. SEEK·TRACK (rewind) button

9. SCAN tuning button

10. SEEK·TRACK (fast forward) button

11. BACK button

12. Power/VOL (volume) dial

13. RPT (repeat) button

14. RDM (random) button

15. Radio station preset select buttons

16. TUNE·FOLDER dial

Display screen, heater and air conditioner, and audio system 4-57

Condition: 'Except for China'/

(212,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-58 Display screen, heater and air conditioner, and audio system

17. ENTER/SETTING button

Audio main operation

T32A130827-7B68DF70-2F5F-4607-9A4D-383767B4398E

The audio system operates when the ignition switch is

placed in the “ON” or “ACC” position.

Head unit:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The auto loudness circuit enhances the low and high

frequency ranges automatically in both radio reception

and CD playback.

Power/VOL dial:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push Power/VOL dial to turn on and off the audio

system.

Turn the Power/VOL dial to adjust the volume.

Audio settings:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The settings screen will appear when pushing the

ENTER/SETTING button.

The following items are available in the settings screen.

. Bluetooth

It is possible to set the Bluetooth

settings. For

details of the Bluetooth

settings, see “Bluetooth

audio player operation” (P.4-61).

. Bass, Treble, Balance and Fade

Controls the sound of the audio system. Balance

adjusts the sound between the left and right

speakers. Fade adjusts the sound between the

front and rear speakers.

Select the “Bass”, “Treble”, “Balance” or “Fade”

using the TUNE·FOLDER dial and then push the

ENTER/SETTING button. Turn the TUNE·FOLDER

dial to adjust the Bass, Treble, balance and Fade

of the screen to the preferred level.

. Brightness and Contrast

Adjust the brightness and contrast of the screen.

Select the “brightness” or “contrast” using the

TUNE·FOLDER dial and then push the ENTER/

SETTING button. Turn the TUNE·FOLDER dial to

adjust the brightness and contrast of the screen to

the preferred level.

. Clock Adjust

Adju st the clock according to the f ollowing

procedure.

JVH0653X

1) Select “Clock Adjust” usi ng the TUNE·-

FOLDER dial

and then push the

ENTER/SETTING button

2) Adjust the hour with the TUNE·FOLDER dial

and then push the ENTER/SETTING

button

3) Adjust the minute with the TUNE·FOLDER

dial

and then push the ENTER/SETTING

button

24 hour clock is not available.

. On-Screen Clock

When this item is turned on, a clock is always

displayed in the upper right corner of the screen.

Select the “On-Screen Clock” using the TUNE·-

FOLDER dial and then push the ENTER/SETTING

button. You can toggle between ON and OFF

using the TUNE·FOLDER dial.

. RDS Display (if equipped)

RDS (radio data system) information can be

shown on the display. Select “RDS Display” using

the TUNE·FOLDER dial and then push the

ENTER/SETTING button. You can toggle between

ON and OFF using the TUNE·FOLDER dial.

. Speed Sensitive Vol.

To change the Speed Sensitive Volume (Speed

Sens Vol.) level from off (0) to 5, turn the

TUNE·FOLDER dial.

. AUX Vol.

Controls the volume level of incoming sound when

an auxiliary device is connected to the system.

Choose a setting between 1 and 3 or choose 0 to

disable the feature entirely.

. Language Select

The language settings can be changed.

Select “Language Select” using the TUNE·-

FOLDER dial and then push the ENTER/SETTING

button. Use the TUNE·FOLDER dial to select the

preferred language.

DISP button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Display of the screen can be canceled by pushing the

DISP button. You can then listen to music that is being

played back. If you want to display the screen again,

either push the DISP button once more or push the

FM·AM, CD, Apps or MEDIA button.

MEDIA button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Pushing the MEDIA button will switch the audio source

as follows:

USB/iPod? Bluetooth ? AUX ? USB/iPod

Condition: 'Except for China'/

(213,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

Apps button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The Apps button launches the Smartphone Integration

mode. See “NissanConnect App smartphone integra-

tion” (P.4-74).

Radio operation

T32A130827-B3EDF0C3-D278-44B9-859E-F2AEECD42664

FM·AM button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the FM·AM button to change the band as follows:

AM ? FM1 ? FM2? AM

TUNE (Tuning):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Turn the radio TUNE·FOLDER dial for manual tuning.

Radio Data System (RDS) (if equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

RDS stands for Radio Data System, and is a data

information service transmitted by some radio stations

on the FM band (not AM band) encoded within a

regular radio broadcast. Currently, most RDS stations

are in large cities, but many stati ons are now

considering broadcasting RDS data.

RDS can display:

. Station name, such as “The Groove”.

. Music or programming type such as “Classical”,

“Country” or “Rock”.

SEEK tuning:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the SEEK·TRACK (rewind) or SEEK·TRACK (fast

forward) button to tune from low to high or high to low

frequencies and to stop at the next broadcasting

station.

SCAN tuning:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the SCAN tuning button to tune from low to high

frequencies and stop at each broadcasting station for

5 seconds. Pushing the button again during this 5

seconds period will stop SCAN tuning and the radio

will remain tuned to that station.

If the SCAN tuning button is not pushed within 5

seconds, SCAN tuning moves to the next station.

to Station memory operations:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

12 stations can be set for the FM band (6 each for

FM1 and FM2) and 6 stations can be set for the AM

band.

1. Choose the radio band using the FM·AM button.

2. Tune to the desired station using the SEEK·-

TRACK, SCAN button or the TUNE·FOLDER dial.

3. Push and hold the desired station preset button

to until the radio mutes.

4. The station indicator will then come on and the

sound will resume. Memorizing is now complete.

5. Other buttons can be set in the same manner.

If the battery cable is disconnected, or if the fuse

opens, the station memory will be erased. In that case,

reset the desired stations.

CD player operation

T32A130827-C5926ADA-0B4E-4360-AC42-A9B551F5C29C

Place the ignition switch in the “ON” or “ACC”

position, and insert the Compact Disc (CD) into the

slot with the label side facing up. The CD will be

guided automatically into the slot and start playing.

After loading the CD, the number of tracks on the CD

and the play time will appear on the display.

If the radio is already operating, it will automatically turn

off and the CD will play.

If the system has been turned off while the CD was

playing, pushing the Power/VOL dial will start the CD.

PLAY:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the CD button is pushed with the system off and

the CD loaded, the system will turn on and the CD will

start to play.

When the CD button is pushed with the CD loaded

and the radio playing, the radio will automatically be

turned off and the CD will start to play.

SEEK/TRACK button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for more than 1.5

seconds while the CD is being played, the CD will play

while fast forwarding or rewinding. When the button is

released, the CD will return to normal play speed.

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for less than 1.5

seconds while the CD is being played, the next track or

the beginning of the current track on the CD will be

played.

REPEAT (RPT):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the RPT button is pushed while the CD is

played, the play pattern can be changed as follows:

(CD)

(Normal) Û 1 Track Repeat

(CD with compressed audio files)

(Normal) ? 1 Folder Repeat ? 1 Track Repeat ?

(Normal)

Display screen, heater and air conditioner, and audio system 4-59

Condition: 'Except for China'/

(214,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-60 Display screen, heater and air conditioner, and audio system

RANDOM (RDM):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the RDM button is pushed while a CD is being

played, the play pattern can be changed as follows:

(CD)

(Normal) Û 1 Disc Random

(CD with compressed audio files)

(Normal) ? 1 Disc Random ? 1 Folder Random ?

(Normal)

CD eject:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the CD eject button is pushed with the CD

loaded, the CD will be ejected.

When this button is pushed while the CD is being

played, the CD will be ejected.

If the CD comes out and is not removed, it will be

pulled back into the slot to protect it.

USB device player operation

GUID-DE980C85-E27D-4462-8885-88C9DEB3A959

USB main operation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The USB port is located on the lower part of the

instrument panel. See “USB (Universal Serial Bus)

connection port” (P.4-75). Connect a USB memory

device into the connector. The USB memory device

will be activated automatically.

If the system has been turned off while the USB

memory device was playing, pushing the Power/VOL

dial will start the USB memory device.

Refer to your device manufacturer’s owner information

regarding the proper use and care of the device.

PLAY:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the MEDIA button is pushed with the system off

and the USB memory device inserted, the system will

turn on.

If another audio source is playing and a USB memory

device is inserted, push the MEDIA button repeatedly

until the color display changes to the USB memory

device mode.

Previous/Next File and Fast Re-

wind/Forward:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for more than 1.5

seconds while a USB memory device is being played,

the USB memory device will play while forwarding or

rewinding. When the button is released, the USB

memory device will return to normal play speed.

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for less than 1.5

seconds while the USB memory device is being

played, the next track or the beginning of the current

track on the USB memory device will be played.

Folder selection:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To change to another folder in the USB memory

device, turn the TUNE·FOLDER dial.

REPEAT (RPT):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the RPT button is pushed while the USB

memory device is played, the play pattern can be

change as follows.

To change the play mode, push the RPT button

repeatedly and the mode will change as follows.

(Normal) ? 1 Folder Repeat ? 1 Track Repeat ?

(Normal)

RANDOM (RDM):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the RDM button is pushed while a USB memory

device is being played, the play pattern can be

changed as follows.

To change the play mode, push the RDM button

repeatedly, and the mode will change as follows.

(Normal) ? All Random ? 1 Folder Random ?

(Normal)

iPod player operation

GUID-A0ADF5D6-E93A-45E3-86F0-97E027AB52E4

Connecting iPod:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

USB port is located on the lower part of the instrument

panel. Connect the iPod with a USB port using the

cable. See “USB (Universal Serial Bus) connection

port” (P.4-75). The battery of the iPod is charged while

the cable is connected to the vehicle.

Depending on the version of the iPod, the display on

the iPod shows a NISSAN or Accessory Attached

screen when the connection is completed. When the

iPod is connected to the vehicle, the iPod music library

can only be operated by the vehicle audio controls.

* iPod and iPhone are a trademark of Apple Inc.,

registered in the U.S. and other countries.

Refer to your device manufacturer’s owner information

regarding the proper use and care of the device.

Compatibility:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The following models are compatible:

. iPod nano 1G (Firmware version 1.3.1 -)

. iPod nano 2G (Firmware version 1.1.3 -)

. iPod nano 3G (Firmware version 1.0.0 -)

Condition: 'Except for China'/

(215,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

. iPod nano 4G (Firmware version 1.0.2 -)

. iPod nano 5G (Firmware version 1.0.1 -)

. iPod nano 6G (Firmware version 1.0 -)

. iPod nano 7G (Firmware version 1.0.0 -)

. iPod 5G (Firmware version 1.2.1 -)

. iPod classic (Firmware version 1.0.0 -)

. iPod Touch (iOS 1.1 -)

. iPod Touch 2G (iOS 2.1.1 -)

. iPod Touch 3G (iOS 3.1 -)

. iPod Touch 4G (iOS 4.1 -)

. iPod Touch 5G (iOS 6.0.0 -)

. iPhone (iOS 1.0.0 - 2.2.1)

. iPhone 3G (iOS 2.1 -)

. iPhone 3GS (iOS 3.0 -)

. iPhone 4/4S (iOS 4.0 -)

. iPhone 5 (iOS 6.0.0 -)

Operations attributable to firmware update by Apple

are not guaranteed.

MEDIA:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To switch to the iPod mode, push the MEDIA button

until the USB/iPod mode is selected while the ignition

switch is placed in the “ON” or “ACC” position.

If another audio source is playing and the iPod is

connected, pushing the MEDIA button changes to the

iPod mode.

If the system has been turned off while the iPod was

playing, pushing the Power/VOL dial button will start

the iPod.

When the MEDIA button is pushed while the iPod is

connected, the interface for iPod operation is shown

on the audio display. The items on the menu list can be

scrolled by pushing the SEEK·TRACK (rewind) or

SEEK·TRACK (fast forward) button while the iPod is

operational. To select an item, push ENTER/SETTING

button. Items in the iPod menu appear on the display in

the following order.

. Now playing

. Playlists

. Artists

. Albums

. Songs

. Podcasts

. Genres

. Composers

. Audiobooks

. Shuffle Songs

Push the BACK button to return to the previous

screen.

For more information about each item, see the iPod

Owner’s Manual.

Previous/Next Track and Fast Re-

wind/Forward:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for more than 1.5

seconds while the iPod is playing, the iPod will play

while fast forwarding or rewinding. When the button is

released, the iPod will return to the normal play speed.

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for less than 1.5

seconds while the iPod is playing, the next track or the

beginning of the current track on the iPod will be

played.

REPEAT (RPT):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the RPT button is pushed while a track is being

played, the play pattern can be changed as follows:

Repeat Off ? 1 Track Repeat? All Repeat ? Repeat

Off

RANDOM (RDM):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the RDM button is pushed while a track is being

played, the play pattern can be changed as follows:

Shuffle Off ? Track Shuffle ? Shuffle Off

Bluetooth

audio player operation

GUID-6686CB44-6F79-4CF5-A5C6-C27BDDC9DD37

If you have a compatible Bluetooth

audio device that

is capable of playing audio files, the device can be

connected to the vehicle’s audio system so that the

audio files on the device play through the vehicle’s

speakers.

Regulatory information:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Bluetooth

trademark:

Bluetooth

is a trademark owned

by Bluetooth SIG, Inc. and li-

censed to Visteon Corporation.

Connecting Bluetooth

device:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To connect your Bluetooth

device to the vehicle,

follow the procedure below:

1. Push the ENTER/SETTING button.

Display screen, heater and air conditioner, and audio system 4-61

Condition: 'Except for China'/

(216,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-62 Display screen, heater and air conditioner, and audio system

JVH0620X

2. Select the “Bluetooth” key.

3. Select the “Add Phone or Device” key. This same

screen can be accessed to remove, replace or

select a different Bluetooth

device.

4. The system acknowledges the command and asks

you to initiate connecting from the Bluetooth

device. The connecting procedure of the Blue-

tooth

device varies according to each cellular

phone model. See the Owner’s manual of the

Bluetooth

device for details.

Bluetooth

audio main operation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

JVH0622X

To switch to the Bluetooth

audio mode, push the

MEDIA button repeatedly until the Bluetooth

audio

mode is displayed on the screen.

The controls for the Bluetooth

audio are displayed on

the screen. Use the Preset 3 button to play and use the

Preset 4 button to pause.

AUX device player operation

GUID-F2C34026-F86E-4326-BA6E-78DE26361CB9

The AUX input jack is located on the lower part of the

instrument panel. (See “AUX (auxiliary) input jack” (P.4-

75).) The AUX audio input jack accepts any standard

analog audio input such as from a portable cassette

tape/CD player, MP3 player or laptop computer.

NISSAN strongly recommends using a stereo mini

plug cable when connecting your music device to the

audio system. Music may not play properly when a

monaural cable is used.

MEDIA:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To switch to the AUX mode, push the MEDIA button

until the AUX mode is selected while the ignition

switch is placed in the “ON” or “ACC” position.

Condition: 'Except for China'/

(217,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

CD PLAYER/RADIO (Type D)

GUID-310B5E49-EA67-48E6-A7E3-F95389C09D95

JVH0924X

1. MEDIA button

2. FM·AM button

3. CD eject button

4. CD button

5. DISP (display) button

6. Color display

7. iPod MENU button

8. SEEK·TRACK (rewind) button

9. SCAN tuning button

10. SEEK·TRACK (fast forward) button

11. BACK button

12. Power/VOL (volume) dial

13. RPT (repeat) button

14. RDM (random) button

15. Radio station preset select buttons

16. TUNE·FOLDER dial

17. ENTER/SETTING button

Display screen, heater and air conditioner, and audio system 4-63

Condition: 'Except for China'/

(218,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-64 Display screen, heater and air conditioner, and audio system

Audio main operation

GUID-76DE082D-28F7-4CB6-A3EA-2B91D38DD80E

The audio system operates when the ignition switch is

placed in the “ON” or “ACC” position.

Head unit:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The auto loudness circuit enhances the low and high

frequency ranges automatically in both radio reception

and CD playback.

Power/VOL dial:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push Power/VOL dial to turn on and off the audio

system.

Turn the Power/VOL dial to adjust the volume.

Audio settings:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The settings screen will appear when pushing the

ENTER/SETTING button.

The following items are available in the settings screen.

. Bluetooth (if equipped)

It is possible to set the Bluetooth

settings. For

details of the Bluetooth

settings, see “Bluetooth

audio player operation” (P.4-67).

. Bass, Treble, Balance and Fade

Controls the sound of the audio system. Balance

adjusts the sound between the left and right

speakers. Fade adjusts the sound between the

front and rear speakers.

Select the “Bass”, “Treble”, “Balance” or “Fade”

using the TUNE·FOLDER dial and then push the

ENTER/SETTING button. Turn the TUNE·FOLDER

dial to adjust the Bass, Treble, balance and Fade

of the screen to the preferred level.

. Brightness and Contrast

Adjust the brightness and contrast of the screen.

Select the “Brightness” or “Contrast” using the

TUNE·FOLDER dial and then push the ENTER/

SETTING button. Turn the TUNE·FOLDER dial to

adjust the brightness and contrast of the screen to

the preferred level.

. Clock Adjust

Adju st the clock according to the f ollowing

procedure.

JVH0729X

1) Select “Clock Adjust” usi ng the TUNE·-

FOLDER dial

and then push the

ENTER/SETTING button

2) Adjust the hour with the TUNE·FOLDER dial

and then push the ENTER/SETTING

button

3) Adjust the minute with the TUNE·FOLDER

dial

and then push the ENTER/SETTING

button

24 hour clock is not available.

. On-Screen Clock

When this item is turned on, a clock is always

displayed in the upper right corner of the screen.

Select the “On-Screen Clock” using the TUNE·-

FOLDER dial and then push the ENTER/SETTING

button. You can toggle between ON and OFF

using the TUNE·FOLDER dial.

. Radio frequency range and step

See “Radio operation” (P.4-65).

. RDS Display (if equipped)

RDS (radio data system) information can be

shown on the display. Select “RDS Display” using

the TUNE·FOLDER dial and then push the

ENTER/SETTING button. You can toggle between

ON and OFF using the TUNE·FOLDER dial.

. Speed Sensitive Vol.

To change the Speed Sensitive Volume (Speed

Sensitive Vol.) level from off (0) to 5, turn the

TUNE·FOLDER dial.

. AUX Vol.

Controls the volume level of incoming sound when

an auxiliary device is connected to the system.

Choose a setting between 1 and 3 or choose 0 to

disable the feature entirely.

. Language Select

The language settings can be changed.

Select “Language Select” using the TUNE·-

FOLDER dial and then push the ENTER/SETTING

button. Use the TUNE·FOLDER dial knob to select

the preferred language.

DISP button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Display of the screen c an be turned off without

disrupting the music by pushing the DISP button. To

turn the screen back on, either push the DISP button

once more or push the FM·AM, CD, iPod MENU or the

MEDIA button.

MEDIA button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Pushing the MEDIA button will switch the audio source

as follows:

USB/iPod ? Bluetooth (if equipped) ? AUX ? USB/

iPod

Condition: 'Except for China'/

(219,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

Radio operation

GUID-1CE22669-5219-4223-95D5-84E6D6A55D53

Frequency range and step change:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To change the frequency range and step specification

of the radio, perform the following operations.

1. Push ENTER/SETTING button while the audio

system is turned off.

2. Turn the TUNE·FOLDER dial until “Radio fre-

quency range and step” is highlighted, and push

the ENTER/SETTING button.

3. Turn the TUNE·FOLDER dial until the preferred

region (Latin America, China, or Other) is dis-

played, and push the ENTER/SETTING button.

4. The system will restart automatically applying the

frequency specification of the selected region.

radio (FM·AM) band select:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Pushing the FM·AM button will change the band as

follows:

AM ? FM1 ? FM2 ? AM

TUNE (Tuning):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Turn the radio TUNE·FOLDER dial for manual tuning.

Radio Data System (RDS) (if equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

RDS stands for Radio Data System, and is a data

information service transmitted by some radio stations

on the FM band (not AM band) encoded within a

regular radio broadcast. Currently, most RDS stations

are in large cities, but many stati ons are now

considering broadcasting RDS data.

RDS can display:

. Station name, such as “The Groove”.

. Music or programming type such as “Classical”,

“Country” or “Rock”.

SEEK tuning:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the SEEK·TRACK (rewind) or SEEK·TRACK (fast

forward) button to tune from low to high or high to low

frequencies and to stop at the next broadcasting

station.

SCAN tuning:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the SCAN tuning button to tune from low to high

frequencies and stop at each broadcasting station for

5 seconds. Pushing the button again during this 5

seconds period will stop SCAN tuning and the radio

will remain tuned to that station.

If the SCAN tuning button is not pushed within 5

seconds, SCAN tuning moves to the next station.

to Station memory operations:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

12 stations can be set for the FM band (6 each for

FM1 and FM2) and 6 stations can be set for the AM

band.

1. Choose the radio band using the FM·AM button.

2. Tune to the desired station using the SEEK·-

TRACK, SCAN button or the TUNE·FOLDER dial.

3. Push and hold the desired station preset button

to .

4. The station indicator will then come on. Memoriz-

ing is now complete.

5. Other buttons can be set in the same manner.

If the battery cable is disconnected, or if the fuse

opens, the station memory will be erased. In that case,

reset the desired stations.

CD player operation

GUID-8A89C159-20F3-4AC5-8A36-4BF0E8E51683

Place the ignition switch in the “ON” or “ACC”

position. Insert the Compact Disc (CD) into the slot

with the label side facing up. The CD will be guided

automatically into the slot and start playing.

After loading the CD, the number of tracks on the CD

and the play time will appear on the display.

If the radio is already operating, it will automatically turn

off and the CD will play.

If the system has been turned off while the CD was

playing, pushing the Power/VOL dial will start the CD.

PLAY:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the CD button is pushed with the system off and

the CD loaded, the system will turn on and the CD will

start to play.

When the CD button is pushed with the CD loaded

and the radio playing, the radio will automatically be

turned off and the CD will start to play.

SEEK/TRACK:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for more than 1.5

seconds while the CD is being played, the CD will play

while fast forwarding or rewinding. When the button is

released, the CD will return to normal play speed.

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for less than 1.5

seconds while the CD is being played, the next track or

the beginning of the current track on the CD will be

played.

Display screen, heater and air conditioner, and audio system 4-65

Condition: 'Except for China'/

(220,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-66 Display screen, heater and air conditioner, and audio system

REPEAT (RPT):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the RPT button is pushed while the CD is

played, the play pattern can be changed as follows:

(CD)

(Normal) Û 1 Track Repeat

(CD with compressed audio files)

(Normal) ? 1 Folder Repeat ? 1 Track Repeat ?

(Normal)

RANDOM (RDM):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the RDM button is pushed while a CD is being

played, the play pattern can be changed as follows:

(CD)

(Normal) Û 1 Disc Random

(CD with compressed audio files)

(Normal) ? 1 Disc Random ? 1 Folder Random ?

(Normal)

CD eject:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the CD eject button is pushed with the CD

loaded, the CD will be ejected.

When this button is pushed while the CD is being

played, the CD will be ejected.

If the CD comes out and is not removed, it will be

pulled back into the slot to protect it.

USB device player operation

GUID-67DB177C-1F24-47D7-A32E-D1F982355EFD

USB main operation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The USB port is located on the lower part of the

instrument panel. See “USB (Universal Serial Bus)

connection port” (P.4-75). Connect a USB memory

device into the connector. The USB memory device

will be activated automatically.

If the system has been turned off while the USB

memory device was playing, pushing the Power/VOL

dial will start the USB memory device.

Refer to your device manufacturer’s owner information

regarding the proper use and care of the device.

Play:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the MEDIA button is pushed with the system

turned off and the USB device inserted, the system will

turn on.

If another audio source is playing and a USB device is

inserted, push the MEDIA button repeatedly until the

color display changes to the USB device mode.

Previous/Next File and Fast Re-

wind/Forward:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for more than 1.5

seconds while a USB device is being played, the USB

device will play while forwarding or rewinding. When

the button is released, the USB device will return to

normal play speed.

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for less than 1.5

seconds while the USB device is being played, the

next track or the beginning of the current track on the

USB device will be played.

Folder selection:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To change to another folder in the USB device, turn the

TUNE·FOLDER dial.

REPEAT (RPT):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the RPT button is pushed while the USB device

is played, the play pattern can be change as follows.

To change the play mode, push the RPT button

repeatedly and the mode will change as follows.

(Normal) ? 1 Folder Repeat ? 1 Track Repeat ?

(Normal)

RANDOM (RDM):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the RDM button is pushed while a USB device

is being played, the play pattern can be changed as

follows.

To change the play mode, push the RDM button

repeatedly, and the mode will change as follows.

(Normal) ? All Random ? 1 Folder Random ?

(Normal)

iPod player operation

GUID-F0306A02-C992-4DD8-ABDA-3E5DAF79BF42

Connecting iPod:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The USB port is located on the lower part of the

instrument panel. See “USB (Universal Serial Bus)

connection port” (P.4-75).

Connect the iPod cable to the USB port. The battery of

the iPod is charged while the cable is connected to the

vehicle.

Depending on the version of the iPod, the display on

the iPod shows a NISSAN or Accessory Attached

screen when the connection is completed. When the

iPod is connected to the vehicle, the iPod music library

can only be operated by the vehicle audio controls.

Condition: 'Except for China'/

(221,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

* iPod and iPhone are a trademark of Apple Inc.,

registered in the U.S. and other countries.

Refer to your device manufacturer’s owner information

regarding the proper use and care of the device.

Compatibility:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The following models are compatible:

. iPod nano 1G (Firmware version 1.3.1 -)

. iPod nano 2G (Firmware version 1.1.3 -)

. iPod nano 3G (Firmware version 1.0.0 -)

. iPod nano 4G (Firmware version 1.0.2 -)

. iPod nano 5G (Firmware version 1.0.1 -)

. iPod nano 6G (Firmware version 1.0 -)

. iPod nano 7G (Firmware version 1.0.0 -)

. iPod 5G (Firmware version 1.2.1 -)

. iPod classic (Firmware version 1.0.0 -)

. iPod Touch (iOS 1.1 -)

. iPod Touch 2G (iOS 2.1.1 -)

. iPod Touch 3G (iOS 3.1 -)

. iPod Touch 4G (iOS 4.1 -)

. iPod Touch 5G (iOS 6.0.0 -)

. iPhone (iOS 1.0.0 - 2.2.1)

. iPhone 3G (iOS 2.1 -)

. iPhone 3GS (iOS 3.0 -)

. iPhone 4/4S (iOS 4.0 -)

. iPhone 5 (iOS 6.0.0 -)

Operations attributable to firmware update by Apple

are not guaranteed.

iPod main operation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The system operates when the ignition switch is in the

“ON” or “ACC” position. Push the MEDIA button

repeatedly or push the iPod MENU button to switch to

the iPod mode.

If the system has been turned off while the iPod was

playing, pushing the Power/VOL dial will start the iPod.

If another audio source is playing and the iPod is

connected, pushing the iPod MENU button or the

MEDIA button repeatedly will change to the iPod

mode.

When the iPod MENU button is pushed while the iPod

is connected, the interface for iPod operation is shown

on the audio display. The items on the menu list can be

scrolled by turning the TUNE·FOLDER dial while the

iPod is operating. To select an item, push ENTER/

SETTING button. Items in the iPod menu appear on

the display in the following order.

. Now playing

. Playlists

. Artists

. Albums

. Songs

. Podcasts

. Genres

. Composers

. Audiobooks

. Shuffle Songs

Push the BACK button to return to the previous

screen.

For more information about each item, see the iPod

Owner’s Manual.

Previous/Next Track and Fast Re-

wind/Forward:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for more than 1.5

seconds while the iPod is playing, the iPod will play

while fast forwarding or rewinding. When the button is

released, the iPod will return to the normal play speed.

When the SEEK·TRACK (rewind) or SEEK·TRACK

(fast forward) button is pushed for less than 1.5

seconds while the iPod is playing, the next track or the

beginning of the current track on the iPod will be

played.

REPEAT (RPT):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the RPT button is pushed while a track is being

played, the play pattern can be changed as follows:

(Repeat off) ? 1 Track Repeat? All Repeat ?

(Repeat off)

RANDOM (RDM):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the RDM button is pushed while a track is being

played, the play pattern can be changed as follows:

(Shuffle off) ? Track Shuffle ? (Shuffle off)

Bluetooth

audio player operation (if

equipped)

GUID-179C11CC-86CB-470B-8088-247DD20243AE

If you have a compatible Bluetooth

audio device that

is capable of playing audio files, the device can be

connected to the vehicle’s audio system so that the

audio files on the device play through the vehicle’s

speakers.

Display screen, heater and air conditioner, and audio system 4-67

Condition: 'Except for China'/

(222,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-68 Display screen, heater and air conditioner, and audio system

Regulatory information:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Bluetooth

trademark:

Bluetooth

is a trademark owned

by Bluetooth SIG, Inc. and li-

censed to Visteon Corporation.

Connecting Bluetooth

device:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To connect your Bluetooth

device to the vehicle,

follow the procedure below:

1. Push the ENTER/SETTING button.

JVH0620X

2. Select the “Bluetooth” key.

3. Select the “Add Phone or Device” key. This same

screen can be accessed to remove, replace or

select a different Bluetooth

device.

4. The system acknowledges the command and asks

you to initiate connecting from the Bluetooth

device. The connecting procedure of the Blue-

tooth

device varies according to each cellular

phone model. See the Owner’s manual of the

Bluetooth

device for details.

Bluetooth

audio main operation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

JVH0622X

To switch to the Bluetooth

audio mode, push the

MEDIA button repeatedly until the Bluetooth

audio

mode is displayed on the screen.

The controls for the Bluetooth

audio are displayed on

the screen. Use the Preset 3 button to play and use the

Preset 4 button to pause.

AUX device player operation

GUID-F6D808E8-313C-4430-90A8-A719C5AF791B

The AUX input jack is located on the lower part of the

instrument panel. (See “AUX (auxiliary) input jack” (P.4-

75).) The AUX audio input jack accepts any standard

analog audio input such as from a portable cassette

tape/CD player, MP3 player or laptop computer.

NISSAN strongly recommends using a stereo mini

plug cable when connecting your music device to the

audio system. Music may not play properly when a

monaural cable is used.

MEDIA button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To switch to the AUX mode, push the MEDIA button

until the AUX mode is selected while the ignition

switch is placed in the “ON” or “ACC” position.

Condition: 'Except for China'/

(223,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

CD PLAYER/RADIO (Type E)

T32A130827-203A38B4-603C-441C-A72C-6A13586BD731

JVH0678X

Models with RADIO button

Display screen, heater and air conditioner, and audio system 4-69

Condition: 'Except for China'/

(224,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-70 Display screen, heater and air conditioner, and audio system

JVH0850X

Models with FM·AM button

1. CD button

2. RADIO/FM·AM button

3. Disc eject button

4. Disc insert slot

5. Seek/Track buttons

6. Power/VOLUME dial

7. AUX (auxiliary) button

8. ENTER/Scroll dial

9. BACK button

10. SETUP button

Audio main operation

T32A130827-FA70A435-74A0-4F80-89E8-0285847C993F

The audio system operates when the ignition switch is

placed in the “ON” or “ACC” position.

Power/VOLUME dial:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push Power/VOLUME dial to turn on and off the audio

system.

Turn the Power/VOLUME dial to adjust the volume.

This vehicle may be equipped with Speed Sensitive

Volume (SSV) function for audio. When this function is

turned on, the audio volume will be adjusted auto-

matically as the vehicle speed changes. For operations

to turn on and off the SSV function, see “Audio

settings” (P.4-5).

Audio settings:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

For the operations to adjust the audio settings, see

“Audio settings” (P.4-5).

Traffic Announcement (if equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Touch “TA” on the audio screen to turn on or off the

Traffic Information setting. When it is turned on, the

Traffic Information will interrupt the music that was

playing and informs the driver of the received traffic

information.

Radio operation

T32A130827-FD693418-E014-4E0A-AFD3-0933BDD37EFB

The audio system operates when the ignition switch is

placed in the “ON” or “ACC” position.

Radio band select button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the Radio band select button to change the band

as follows:

For Australia, New Zealand and Europe:

AM ? DAB ? FM ? AM

For Mexico:

AM ? FM1 ? FM2 ? AM

Except for Australia, New Zealand, Europe and

Mexico:

AM ? FM ? AM

If another audio source is playing when the RADIO/

FM·AM button is pushed, the audio source playing will

automatically be turned off and the last radio station

played will begin playing.

Condition: 'Except for China'/

(225,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

Radio tuning:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When in radio mode, the radio can be tuned using the

touchscreen. To bring up the visual tuner, touch the

“Tune” key on the lower part of the screen. A screen

appears with a bar running from low frequencies on the

left to high frequencies on the right.

One of the following operations can be used for tuning.

. Touching the bar on the screen

. Touching “

”/“ ” on the screen

. Turning ENTER/Scroll dial

To return to the regular radio display screen, touch the

“OK” key.

Station List:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When in FM or DAB (if equipped) mode, touch “FM

List” or “DAB List” to display the station lists.

Seek/Track buttons:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When in radio mode, push the Seek/Track buttons to

tune from low to high or high to low frequencies and to

stop at the next broadcasting station.

Station memory keys:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Up to six stations can be stored for AM band, and up to

twelve stations can be stored for each of the other

bands.

1. Choose the radio band using the Radio band

select button.

2. Tune to the desired station using manual or seek

tuning. Touch and hold any of the desired station

memory keys until a beep sound is heard.

For FM and DAB (if equipped), touch the “7-12”

key to display the 7 - 12 memory keys.

3. The channel indicator will then come on and the

sound will resume. Programming is now complete.

DAB operation (if equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

In the DAB mode, the following operation keys and

information are available.

. DAB List:

Touch to display the available station list.

. TA:

Touch this key to turn on and off the TA (Traffic

Announcement) mode. When turned on, received

TA will interrupt the audio source that is playing.

. Extra chan.:

The “Extra chan.” key will allow access to extra

stations transmitted within the g roup of the

currently selected station. If extra stations are not

available within the group, the key will not operate.

. Radio text:

Radio text is shown on the DAB main screen

underneath the DAB station name. This displays

radio program and song information as deter-

mined by the DAB station.

EAS in EAS test (displayed on the screen as a PTY

name) is an abbreviation of Emergency Alert System.

Occasionally, in areas of poor DAB signal strength, the

full station name in the DAB List and DAB main screen

might be distorted. In this situation it may still be

possible to listen to the particular radio station, at a

reduced level of sound quality, but this is not always

possible. This may also be shown in the vehicle

information display.

CD player operation

T32A130827-871F41A7-C7FD-4AAD-8ECD-13722AAAA101

Loading disc:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Insert a CD into the slot with the label side facing up.

The CD will be guided automatically into the slot and

will start playing. If the radio is already playing, it will

automatically turn off, and the CD will start playing.

CAUTION:

Do not force the compact disc into the slot. This

could damage the player.

button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the CD button is pushed with the system off and

the CD loaded, the system will turn on and the CD will

start to play.

When the CD button is pushed with a CD loaded while

the radio playing, the radio will turned off and the CD

will start to play.

Seek/Track button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the Seek/Track (rewind/fast forward) button is

pushed for more than 1.5 seconds while the CD is

being played, the CD will play while fast forwarding or

rewinding. When the button is released, the CD will

return to normal play speed.

When the Seek/Track (rewind) or Seek/Track (fast

forward) button is pushed for less than 1.5 seconds

while the CD is being played, the next track or the

beginning of the current track on the CD will be played.

Push the button several times to skip through the

tracks on the CD. If the last track on a CD is skipped,

the first track on the disc will play. If the last track in a

folder of an MP3 CD is skipped, the first track of the

next folder will play.

Display screen, heater and air conditioner, and audio system 4-71

Condition: 'Except for China'/

(226,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-72 Display screen, heater and air conditioner, and audio system

CD/MP3/WMA display mode:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

While listening to a CD or an MP3/WMA CD, certain

text may be displayed (when a CD encoded with text is

being used). Depending on how the CD or MP3/WMA

CD is encoded, the text is displayed listing the artist,

album and song title. Operation keys are also

displayed on the screen.

Mix:

Touching the “Mix” key while an CD or MP3 CD is

playing will alternate the random play pattern as

follows:

(CD)

(Normal) ? Mix ? (Normal)

(CD with compressed audio files)

(Normal) ? Random Folder ? Random All ? (Normal)

Repeat:

Touching the “Repeat” key while an CD or MP3 CD is

playing will alternate the repeat play pattern as follows:

(CD)

(Normal) ? Repeat ? (Normal)

(CD with compressed audio files)

(Nor mal) ? Repeat Track ? Repe at Folder ?

(Normal)

Browse:

Touch the “Browse” key to display the titles on the CD

in list format. Touch the title of a song in the list to

begin playing that song. If an MP3 CD is playing,

touching the “Browse” key will also list the folders on

the disc. Touch the “Folder Up” key to view the lists in

the upper layer. Follow the procedure for selecting a

song with the touchscreen to choose a folder.

Disc eject button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

When the Disc eject button is pushed while a CD is

loaded, the CD will be ejected.

If the CD is not removed within 10 seconds, the CD

will be reloaded.

USB device operation

GUID-4A456CCC-E0DD-4F6D-8C74-E76C9927A1FB

The audio system operates when the ignition switch is

placed in the “ON” or “ACC” position.

The USB port is located on the lower part of the

instrument panel. See “USB (Universal Serial Bus)

connection port” (P.4-75). Connect a USB memory

device into the connector. The USB memory device

will be activated automatically.

Refer to your device manufacturer’s owner information

regarding the proper use and care of the device.

USB main operation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

If another audio source is playing and a USB memory

device is inserted, push the AUX button until the

screen on the display changes to the USB memory

mode.

If the system has been turned off while the USB

memory device was playing, push the Power/VOLUME

dial to restart the USB memory device.

Touch the name of a song on the screen to begin

playing that song.

USB screen operation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

While files on a USB memory device are playing, the

play pattern can be altered so that songs are repeated

or played randomly.

Mix:

Touching the “Mix” key on the screen while an USB

memory device is playing will alternate the random play

pattern as follows:

(Normal) ? Random Folder ? Random All ? (Normal)

Repeat:

Touching the “Repeat” key on the screen while an USB

memory device is playing will alternate the repeat play

pattern as follows:

(Nor mal) ? Repeat Track ? Repe at Folder ?

(Normal)

Browse:

Touch “Browse” key to display USB interface. Select

the songs you wish to play by touching the item on the

screen.

Seek/Track buttons:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the Seek/Track (rewind) button while an audio file

on the USB memory device is playing to return to the

beginning of the current track. Push the button several

times to skip backward several tracks.

Push the Seek/Track (fast forward) button while an

audio file on the USB memory device is playing to

advance one track. Push the button several times to

skip forward several tracks. if the last track on the USB

memory device is skipped, the first track of the next

folder is played.

Condition: 'Except for China'/

(227,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

iPod player operation

GUID-EAA661F5-316D-43D5-85C1-4B44DC15DAEE

Connecting iPod:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The USB port is located on the lower part of the

instrument panel. See “USB (Universal Serial Bus)

connection port” (P.4-75).

If your iPod supports charging via a USB connection,

its battery will be charged while connected to the

vehicle with the ignition switch placed in the “ON” or

“ACC” position.

Compatibility:

The following models are compatible:

. iPod 5th Generation (firmware version 1.2.3 or

later)

. iPod Classic (firmware version 1.1.1 or later)

. iPod Touch (firmware version 2.0.0 or later)*

. iPod nano - 1st generation (firmware version 1.3.1

or later)

. iPod nano - 2nd generation (firmware version

1.1.3 or later)

. iPod nano - 3rd generation (firmware version 1.1.3

or later)

. iPod nano - 4th generation (firmware version 1.0.4

or later)

. iPod nano - 5th generation (firmware version 1.0.1

or later)

* Some features of this iPod may not be fully functional.

Make sure that your iPod firmware is updated to the

version indicated above.

iPod main operation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

If the system has been turned off while the iPod was

playing, pushing the Power/VOLUME dial will start the

iPod.

If another audio source is playing and a iPod is

connected, push the AUX button until the screen on

the display changes to the iPod mode.

Refer to your device manufacturer’s owner information

regarding the proper use and care of the device.

Interface operation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

JVH0680X

The interface for iPod operation shown on the vehicle’s

audio system display screen is similar to the iPod

interface. Use the touchscreen, BACK button or the

ENTER/Scroll dial to navigate the menus on the

screen.

When the iPod is playing, touch the “Menu” key to

bring up the iPod interface.

Depending on the iPod model, the following items may

be available on the menu list screen. For further

information about each item, see the iPod Owner’s

Manual.

. Playlists

. Artists

. Albums

. Genres

. Songs

. Composers

. Audiobooks

. Podcasts

Scrolling menus:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

JVH0681X

While navigating long lists of artists, albums or songs

in the music menu, it is possible to scroll the list by the

first character in the name. To activate character

indexing, touch the “A-Z” key in the upper right corner

of the screen. Turn the ENTER/Scroll dial to choose

the number or letter to jump to in the list and then push

the ENTER/Scroll dial.

If no character is selected after thirty seconds, the

display returns to normal.

Random and repeat play mode:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

While the iPod is playing, the play pattern can be

altered so that songs are repeated or played randomly.

Mix:

Touching the “Mix” key on the screen while an iPod is

playing will alternate the random play pattern as

follows:

(Normal) ? Shuffle Songs ? (Normal)

Display screen, heater and air conditioner, and audio system 4-73

Condition: 'Except for China'/

(228,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-74 Display screen, heater and air conditioner, and audio system

Repeat:

Touching the “Repeat” key on the screen while an iPod

is playing will alternate the repeat play pattern as

follows:

(Normal) ? Repeat Song ? (Normal)

Seek/Track buttons:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Push the Seek/Track (rewind) or Seek/Track (fast

forward) button to skip backward or forward one track.

Push and hold the Seek/Track (rewind) or Seek/Track

(fast forward) button for 1.5 seconds while a track is

playing to reverse or fast forward the track being

played. The track plays at an increased speed while

reversing or f ast forwarding. When the button is

released, the track returns to normal play speed.

Bluetooth

audio player operation

GUID-7D0325C2-37A7-4412-A45F-1B6BCAC23416

If you have a compatible Bluetooth

audio device that

is capable of playing audio files, the device can be

connected to the vehicle’s audio system so that the

audio files on the device play through the vehicle’s

speakers

Bluetooth

trademark:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Bluetooth

is a trademark owned

by Bluetooth SIG, Inc. and li-

censed to Bosch.

Connecting Bluetooth

audio:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

JVH0682X

Example

To connect your Bluetooth

audio device to the

vehicle, follow the procedure below:

1. Push the SETUP button.

2. Select the “Telephone & Bluetooth” key.

3. Select the “Pair New Device” key.

4. The system acknowledges the command and asks

you to initiate connecting from the phone handset.

The connecting procedure of the cellular phone

varies according to each cellular phone model.

See the Bluetooth

device Owner’s Manual for

details.

Bluetooth

audio player main operation:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To switch to the Bluetooth

audio mode, push the AUX

button repeatedly until the Bluetooth

audio mode is

displayed on the screen.

The controls for the Bluetooth

audio are displayed on

the screen.

AUX device player operation

GUID-363D7194-978F-40B8-A35A-C7FD21AF5634

The AUX input jack is located on the lower part of the

instrument panel. (See “AUX (auxiliary) input jack” (P.4-

75).) The AUX audio input jack accepts any standard

analog audio input such as from a portable cassette

tape/CD player, MP3 player or laptop computer.

NISSAN strongly recommends using a stereo mini

plug cable when connecting your music device to the

audio system. Music may not play properly when a

monaural cable is used.

button:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To switch to the AUX mode, push the AUX button until

the AUX mode is selected while the ignition switch is

placed in the “ON” or “ACC” position.

NISSANCONNECT APP SMARTPHONE

INTEGRATION (if equipped)

GUID-3AE32C91-BDED-4BB9-AAD4-CC441C399892

This vehicle is equipped with Smartphone Integration

technology. This allows many compatible Smartphone

applications to be displayed and easily controlled

through the vehicle’s touchscreen.

NOTE:

A compatible smartphone and registration is

required to use mobile applications or to access

connected features of certain vehicle applica-

tions.

Registering with NissanConnect App

GUID-A8A52349-2CCD-4D15-B6E5-299EC30E1593

To u se the Smartphone Integration feature, it is

necessary for the user to register. In order to register,

visit the NissanConnect website for more information

and to sign up. Once registered, downloa d the

NissanConnect Mobile App from your compatible

phone’s application download source and then log

Condition: 'Except for China'/

Display screen, heater and air conditioner, and audio system -> Audio system (if equipped) for Your Nissan X Trail SUV Second Generation (2007-2012)

Related Topics

Popular Owner Manuals

Latest Owner Manuals