Get Display screen, heater and air conditioner, and audio system -> Bluetooth? Hands-Free Phone System (Type A) Guide for Nissan X Trail SUV Second Generation (2007-2012)

(232,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-78 Display screen, heater and air conditioner, and audio system

GUID-6AF67780-2F6F-4E41-97E4-94B54D31FC45

*Type A is for models without navigation system

(without color display).

WARNING:

. Use a phone after stopping your vehicle in a

safe location. If you have to use a phone

while driving, exercise extreme caution at all

times so full attention may be given to

vehicle operation.

. If you find yourself unable to devote full

attention to vehicle operation while using

th e ph one, pull off the road to a safe

location and stop your vehicle before doing

so.

CAUTION:

To avoid draining the vehicle battery, use a

phone after starting the engine.

Bluetooth

is a wireless radio communication stan-

dard. This system offers a hands-free facility for your

cellular phone to enhance driving comfort.

To use the Bluetooth

Hands-Free Phone System,

your cellular phone must first be setup. For details, see

“Bluetooth

settings” (P.4-79). Once it has been

setup, the hands-free mode is automatically activated

on the registered celllular phone (via Bluetooth

) when

it comes into range.

A notification message appears on the audio display

when the phone is connected, when an incoming call

is being received, as well as when a call is initiated.

When a call is active, the audio system, microphone,

and steering wheel mounted control buttons enable

hands-free communication.

If the audio system is in use at the time, the radio, CD,

iPod, USB audio, Bluetooth

audio or AUX source

mode will be muted and will stay muted until the active

call has ended.

The Bluetooth

system may not be able to connect

with your cellular phone for the following reasons:

. The cellular phone is too far away from the vehicle.

. The Bluetooth

mode on your cellular phone has

not been activated.

. Your cellular phone has not been paired with the

Bluetooth

system of the audio unit.

. The mobile phone does not support Bluetooth

technology.

NOTE:

. For details, see your cellular phone’s Own-

er’s Manual.

. For assistance with your cellular phone

integration, please visit your local NISSAN

dealer.

REGULATORY INFORMATION

GUID-40A86E36-0B53-4332-830B-931B7D80A7EE

Bluetooth

trademark

GUID-6423D970-0B6D-42E9-AB9E-3A3D2A4B4566

Bluetooth

is a trademark owned

by Bluetooth SIG, Inc. and li-

censed to Visteon Corporation.

CE statement

GUID-EA9A94AB-F0CE-4D07-9535-80E0BF6B5E91

Hereby Visteon Corp. declares that this system is in

compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

NSY0105

NOTE:

The audio system only supports Bluetooth

devices with AVRCP (Audio Video Remote Con-

trol Profile) version 1.3, or 1.0 or earlier.

CONTROL BUTTONS AND MICROPHONE

GUID-4FB3CCE5-D6CF-435F-AB68-B51078DBABDC

Instrument panel:

JVH0856X

1. Phonebook quick search button

2. Back

button

Bluetooth

HANDS-FREE PHONE

SYSTEM (Type A)

Condition: 'Except for China'/

(233,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

3. Phone button

4. MENU/ENTER dial

Steering wheel mounted control:

JVH0854X

Type A

JVH0855X

Type B

1. Volume control

-/ + buttons

Push the buttons to increase or decrease the

volume of the speakers.

2. Phone send

/ button

Accept an incoming call by pushing once.

Redial the last outgoing call by pushing the

button for more than 2 seconds.

3. Phone end

button

Reject an incoming call by pushing the button

during an incoming call.

End an active call by pushing the button once.

Microphone:

Microphone is located near the map lights.

Bluetooth

SETTINGS

GUID-1717375E-1E37-44D0-8B9E-F6E2BD87D1A7

Pairing device

GUID-42259960-1453-4A2D-AB30-9B890DF733FE

Enter the phone setup menu via the button on

the instrument panel, select the “Bluetooth” key, and

then check if the Bluetooth

is set to on. (If not push

the MENU/ENTER dial to turn it on.)

To setup the Bluetooth

system to pair (connect or

following procedure.

1. To pair a device, select the “Scan device” key or

the “Pair device” key on the display.

2. A notification message will be displayed when the

phone is successfully paired.

3. The display will return to the current audio source

status after the connection is complete.

. While the Bluetooth

connection is active, the

following icons will appear on the display.

—

: Signal strength indicator

—

: Battery status indicator*

—

: Bluetooth

connection ON indicator

*: If low battery is indicated, the Bluetooth

device must be recharged soon.

. Up to 5 different Bluetooth

devices can be

connected. However, only one device can be used

at a time. If 5 different Bluetooth

devices are

registered, a new device can only replace one of

the 5 existing paired devices.

. The pairing procedure and operation may vary

according to device type and compatibility. See

the Bluetooth

device Owner’s Manual for further

details.

Setting items

GUID-DF5F635A-7AD7-4F85-805F-E7CDE205452C

To set up the Bluetooth

system with a device, the

following items are available:

JVH0847X

. Scan devices

Shows all available visible Bluetooth

devices and

initializes Bluetooth

connection from the audio

unit.

. Pair device

Initializes Bluetooth

connection from the mobile

device.

. Sel. device

Paired Bluetooth

devices are listed and can be

selected for connection.

. Del. device

A registered Bluetooth

device can be deleted.

. Bluetooth

If this setting is turned off, the connection between

the Bluetooth

devices and the in-vehicle Blue-

tooth

module will be cancelled.

Display screen, heater and air conditioner, and audio system 4-79

Condition: 'Except for China'/

(234,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-80 Display screen, heater and air conditioner, and audio system

Scan device:

GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0

1. Push the button on the instrument panel.

Select “Scan device” key. The audio unit searches

for the Bluetooth

devices and shows all devices

that were found.

Make sure your Bluetooth

device is available at

this time.

2. Select the device to be paired using the MENU/

ENTER dial.

3. The pairing procedure depends on the device to

be connected:

a. Device without PIN code:

The Bluetooth

connection will be automatically

connected without any further input.

b. Device with PIN code:

Two different ways of pairing are possible

depending on the device:

Type A:

The message “To pair” and “Enter Pin” 0000

will be displayed.

Confirm the PIN code on the device. The

Bluetooth

connection will be made.

Type B:

The message “Pairing request” and “Confirm

password” together with a 6 digit code will be

displayed. The unique and identical code

should be displayed on the device. If the code

is identical confirm on the device.

The Bluetooth

connection will be made.

Pair device:

GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0

. Turn on the Bluetooth

on the audio unit. See

“Bluetooth” (P.4-80).

. Use the audio unit to pair:

Push the

button on the instrument panel.

Select the “Pair Device” key.

The pairing procedure depends on the Bluetooth

device to be connected:

1) Device without PIN code:

The Bluetooth

connection will be automatically

connected without any further input.

2) Device with PIN code:

Two different ways of pairing are possible

depending on the device. For the correct proce-

dure details, see “Scan device” (P.4-80).

. Use the Bluetooth

audio/cellular phone device to

pair:

1) Switch on the search mode for Bluetooth

devices.

If the search mode finds the audio unit it will be

shown on the device display.

2) Select the unit device shown as “My Car”.

3) Enter the number code shown on the relevant

device with the device’s own keypad, and

push the confirmation key on the Bluetooth

device.

Refer to the relevant Bluetooth

device O wner’s

Manual for further details.

Sel. device:

GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0

The paired device list shows which Bluetooth

audio

or cellular p hone devices have been paired or

registered to the system. Select the appropriate device

to connect to the system.

The following icons (if equipped) indicate the capability

of the registered device:

: Cellular phone integration

: Audio streaming (A2DP – Advanced Audio

Distribution Profile)

Del. device:

GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0

A registered device can be removed from Bluetooth

system registration. Select a registered device and

push the MENU/ENTER dial to confirm to deletion.

Bluetooth:

GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0

If Bluetooth

signal has been turned off, a notification

message “ON/OFF” appears when you select “Blue-

tooth” from the phone menu. (Push the

button to

display the phone menu.) To turn the Bluetooth

signal

on, push the MENU/ENTER dial and a follow up screen

will appear. Select “ON” and push the MENU/ENTER

dial to display the Bluetooth

settings menu screen.

USING THE SYSTEM

GUID-208CE11E-34CA-404D-97DC-C8A4D28668DD

The hands-free mode can be operated using the

button on the instrument panel.

Receiving a call

GUID-9FE9352D-A3CF-4B5C-BCD8-A77D15CC901C

JVH0857X

When receiving an incoming call, the display on the

audio unit will show the caller’s phone number (or a

notification message that the caller’s phone number

Condition: 'Except for China'/

(235,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

cannot be shown) an d three operation icons as

illustrated. To high light different icons, turn the

MENU/ENTER dial. Push the MENU/ENTER dial to

select the highlighted icon.

Answering and during a call:

GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0

Answer the call by selecting on the display or by

pushing

/ on the steering wheel.

During the call, the following icons are available:

Select this item to end the call.

Select this item to put the call on hold.

Select this item to transfer the call from the hands-

free phone system to your cellular phone.

Select this item to transfer the call back to the

hands-free phone system from the cellular phone.

. #123:

Select this item to enter numbers during a call. For

example, use this function when directed by an

automated phone system to dial an extension

number.

Putting a call on hold:

GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0

To put a call on hold, select . Select to return to

the call. To reject the call select

Rejecting a call:

GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0

To reject an incoming call, select or by pushing

on the steering wheel.

Making a call

GUID-B127BFA1-6ABB-4F70-9F3D-4C87B05C2A8F

WARNING:

Park the vehicle in a safe location, and apply the

parking brake before making a call.

JVH0863X

A call can be initiated using one of the following

methods:

. Making a call from the phonebook

. Manually dialing a phone number

. Redialing

. Using call history (Call List menu)

— Dialed

— Received

— Missed

Making a call from the phonebook:

GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0

Once the Bluetooth

connection has been made

between the registered cellular phone and the

hands-free phone system, phonebook data will be

transf erred aut omatica lly to the hands-free phone

system. The transfer may take a while before comple-

tion.

NOTE:

Phone book data will be erased when:

. Switching to another registered cellular

phone.

. Cellular phone is disconnected.

. The registered cellular phone is deleted

from the audio system.

1. Push the

button on instrument panel.

2. Turn the MENU/ENTER dial to highlight “Phone

Book” and push the MENU/ENTER dial.

3. Scroll down through the list, select the appropriate

contact name (highlighted), and push the MENU/

ENTER dial.

4. The screen will show the number to be dialed.

Push the MENU/ENTER dial to dial the number.

If more than one number is registered, select an

appropriate icon.

: Home

: Cellular phone

: Office

Display screen, heater and air conditioner, and audio system 4-81

Condition: 'Except for China'/

(236,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-82 Display screen, heater and air conditioner, and audio system

Quick searching the phonebook:

JVH0858X

The quick search mode can be used as follows:

1. Push the A-Z button.

2. Turn the MENU/ENTER dial for the first alphabetic

or numerical letter of the contact name. Once

highlighted, push the MENU/ENTER dial to select

the letter.

3. The display will show the corresponding contact

name(s). Where necessary, use t he MENU/

ENTER dial to scroll further for the appropriate

contact name to call.

4. The screen will show the number to be dialed.

Push the MENU/ENTER dial to dial the number.

Manually dialing a phone number:

GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0

JVH0859X

To dial a phone number manually, perform the following

operation:

1. Push the

button on the instrument panel

and turn the MENU/ENTER dial to highlight “Dial

Number”.

2. Push the MENU/ENTER dial to select “Dial

Number”.

3. Turn the MENU/ENTER dial to scroll along and

highlight each number of the phone number. Push

the MENU/ENTER dial to select the highlighted

number.

To delete the last number entered, scroll to the

“/” (Backspace symbol) and once highlighted,

push the MENU/ENTER dial. The last number will

be deleted. Pus hing the MENU/ENTER dial

repeatedly will delete each subsequent number.

4. After entering the la st number, highlight the

icon and push the MENU/ENTER dial to

dial the number.

Redial:

GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0

To redial or call the last number dialed, push and hold

the

button on the instrument panel or the

steering wheel for more than 2 seconds.

Using call history (Call list menu):

GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0

JVH0860X

A number from the dialed, received, or missed call lists

can also be used to make a call.

1. Push the

button on the instrument panel

and select “Call List” on the display.

2. Turn the MENU/ENTER dial and scroll to an item,

and push the MENU/ENTER dial to select an item.

Available items:

Dialed

Use the dialed call mode to make a call which

is based on the list of outgoing (dialed) calls.

Received

Use the received call mode to make a call

which is based on the list of received calls.

Missed

Use the missed call mode to make a call which

is based on the list of missed calls.

Condition: 'Except for China'/

(237,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

3. Scroll to the preferred phone number and push

the MENU/ENTER dial or the

button on

the instrument panel.

Second incoming call

GUID-59DF6319-FD19-4DC6-9028-5A12E96D1D6A

JVH0861X

Whenever there is a second incoming call is shown in

the display. By selecting the

icon the call is

accepted and the current call is put on hold.

Selecting the

icon using the MENU/ENTER dial

rejects the second incoming call. When this is done

during the conversation it ends the call.

Selecting the

icon using the MENU/ENTER dial

switches the call on line between the first and the

second call.

Ending a call

GUID-75F8FFE0-134E-4C42-9687-3611EBA244FF

To end an active call, highlight the icon and push

the ENTER/MENU dial or push the

button on the

steering wheel.

GENERAL SETTINGS

GUID-433E6CA5-2B0C-434D-BE91-C83E663B4E6F

JVH0862X

Using the MENU/ENTER dial, highlight “Settings” from

the phone menu and push the MENU/ENTER dial.

Volume settings and manually downloading the phone-

book can be done using this menu.

Menu operation:

Turn the MENU/ENTER dial to change the highlighted

item and to change the volume settings.

Push the MENU/ENTER dial to select the highlighted

item and to apply the setting.

Menu items:

. Volume

— Ring

Set the phone ringing volume.

— Call

Set the volume of the conversation during a

call.

. Ringtone

— Car

Switch the ringtone to ring from the vehicle or

the cellular phone.

— Phone

Switch the phone ringing volume on or off.

. PB download

Download the phonebook of the mobile device to

the audio unit manually.

Display screen, heater and air conditioner, and audio system 4-83

Condition: 'Except for China'/

Display screen, heater and air conditioner, and audio system -> Bluetooth? Hands-Free Phone System (Type A) for Your Nissan X Trail SUV Second Generation (2007-2012)

Related Topics

Popular Owner Manuals

Latest Owner Manuals