2007-2012 Nissan X Trail SUV Display screen, heater and air conditioner, and audio system -> RearView Monitor (if equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Display screen, heater and air conditioner, and audio system -> RearView Monitor (if equipped) for Your Nissan X Trail SUV Second Generation (2007-2012)

(161,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
T32A130827-864D3105-3368-482B-83DC-0BF9829189CD
When the shift lever is shifted into the “R” (Reverse)
position, the monitor display shows the view to the rear
of the vehicle.
The system is designed as an aid to the driver in
detecting large stationary objects to help avoid
damaging the vehicle. The system will not detect small
objects below the bumper and may not detect objects
close to the bumper or on the ground.
WARNING:
Failure to follow the warnings and instructions
for proper use of the RearView Monitor could
result in serious injury or death.
. The RearView Monitor is a convenience but
it is not a substitute for proper backing.
Always turn and look out the windows, and
check mirrors to be sure that it is safe to
move before operating the vehicle. Always
back up slowly.
. The system is designed as an aid to the
driver in showing large stationary objects
directly behind the vehicle, to help avoid
damaging the vehicle.
. The system c annot completely eliminate
blind spots and may not show every object.
. Underneath the bumper and the corn er
areas of the bumper cannot be viewed on
the RearView Monitor because of its mon-
itoring range limitation. The system will not
show small objects below the bumper, and
may not show objects close to the bumper or
on the ground.
. Objects viewed in the RearView Monitor
differ from actual distance because a wide-
angle lens is used.
. Objects in the RearView Monitor will appear
visually opposite than when viewed in the
rear view and outside mirrors.
. Make sure that the back door is securely
closed when backing up.
. Do not put anything on the rearview camera.
. When washing the vehicle with high pres-
sure water, be sure not to spray it around the
camera. Otherwise, water may enter the
camera unit causing water condensation on
the lens, a malfunction, fire or an electric
shock.
. Do not strike the camera. It is a precision
instrument. Otherwise, it may malfunction or
cau se damage resulting in a fire or an
electric shock.
CAUTION:
Do not scratch the camera lens when cleaning
dirt or snow from the lens.
HOW TO READ DISPLAYED LINES
GUID-F784552C-AF4F-44B5-A79F-3127745C344B
SAA2776
Guiding lines which indicate the vehicle width and
distances to objects with reference to the bumper line
*
A
are displayed on the monitor.
Distance guide lines:
Indicate distances from the bumper.
. Red line
*
1
: approx. 0.5 m (1.5 ft)
. Yellow line
*
2
: approx. 1 m (3 ft)
. Green line
*
3
: approx. 2 m (7 ft)
. Green line
*
4
: approx. 3 m (10 ft)
Vehicle width guide lines
*
5
:
Indicate the vehicle width when backing up.
Display screen, heater and air conditioner, and audio system 4-7
REARVIEW MONITOR (if equipped)
Condition: 'Except for China'/
(162,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
4-8 Display screen, heater and air conditioner, and audio system
DIFFERENCE BETWEEN PREDICTIVE AND
ACTUAL DISTANCES
T32A130827-3175353A-26AA-46C3-BDC0-661F8C735E5B
Backing up on a steep uphill
T32A130827-934532BC-08B1-444C-97DE-84287C859C9A
JVH0207X
When backing up the vehicle up a hill, the distance
guide lines and the vehicle width guide lines are shown
closer than the actual distance. For example, the
display shows 1 m (3 ft) to the place
*
A
, but the
actual 1 m (3 ft) distance on the hill is the place
*
B
.
Note that any object on the hill is further than it appears
on the monitor.
Backing up on a steep downhill
T32A130827-565F0DBC-8BB7-4A25-8C94-69D8C600E7D3
JVH0208X
When backing up the vehicle down a hill, the distance
guide lines and the vehicle width guide lines are shown
further than the actual distance. For example, the
display shows 1 m (3 ft) to the place
*
A
, but the
actual 1 m (3 ft) distance on the hill is the place
*
B
.
Note that any object on the hill is closer than it appears
on the monitor.
Backing up near a projecting object
T32A130827-DBA38444-2256-455A-B568-EEE2B4831ECF
JVH0232X
The vehicle may seem to nearly clear the object in the
display. However, the vehicle may hit the object if it
projects over the actual backing up course.
Condition: 'Except for China'/
(163,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Backing up behind a projecting object
T32A130827-F39A09CE-BA79-40A1-AF0D-07C3BEDFF944
JVH0247X
The position
*
C
is shown further than the position
*
B
in the display. However, the position
*
C
is actually at
the same distance as the position
*
A
. The vehicle
may hit the object when backing up to the position
*
A
if the object projects over the actual backing up
course.
HOW TO ADJUST THE SCREEN
GUID-EC79F14B-6FF6-46AD-9BD8-9ECF9919E9F5
Adjusting screen (for models with navigation
system)
GUID-76CDE43F-B39B-4083-A190-7BDE7FDF94E7
Operation with touch screen:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. Push the SETUP button.
2. Select the “System” key.
3. Select the “Camera Display Settings” key.
4. Select the item you wish to adjust.
. Display Mode:
Adjusts to fit the level of lighting in the vehicle.
Touch the “Display Mode” key to cycle through
options of the mode (Day, Night and Auto).
. Brightness:
Adjusts the brightness of the display.
. Contrast:
Adjusts the level of contrast.
. Color:
Adjusts the level of the color.
Operation with buttons:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVH0649X
To adjust the screen brightness when the RearView
Monitor is displayed, push the brightness control/
display on·off
button
*
1
.
Adjust brightness to the preferred setting using the
ENTER/Scroll dial
*
2
.
Adjusting screen (for models without naviga-
tion system)
GUID-F6FEC62C-0BA6-4A0D-88F6-7221E5636AD6
JVH0653X
1. Push the ENTER/SETTING button
*
2
.
2. Turn the TUNE·FOLDER dial
*
1
to highlight the
“Brightness” or the “Contrast” key.
3. Push the ENTER/SETTING button
*
2
.
4. Adjust the level using the TUNE·FOLDER dial
*
1
and then push the ENTER/SETTING button
*
2
to
apply the adjustment.
NOTE:
Do not adjust the Brightness or Contrast of the
RearView Monitor while the vehicle is moving.
Display screen, heater and air conditioner, and audio system 4-9
Condition: 'Except for China'/

Related Topics

Popular Owner Manuals