2007-2012 Nissan X Trail SUV Display screen, heater and air conditioner, and audio system -> Heater and air conditioner User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Display screen, heater and air conditioner, and audio system -> Heater and air conditioner for Your Nissan X Trail SUV Second Generation (2007-2012)

(180,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
4-26 Display screen, heater and air conditioner, and audio system
SIDE VENTILATORS
T32A130827-14E8E99F-99CC-4128-B741-5C6C32DD4846
JVH0663X
Open/close the vents by moving the control to either
direction.
: This symbol indicates that the vents are
open. Moving the control to this direction
will open the vents.
: This symbol indicates that the vents are
closed. Moving the control to this direction
will close the vents.
Adjust the air flow direction of the ventilators by moving
the center knob (up/down, left/right) until the desired
position is achieved.
REAR VENTILATORS (if equipped)
T32A130827-09DDAFC4-C01B-4AF0-8E56-8D67AECFADB2
JVH0879X
Open/close the vents by moving the control to either
direction.
: This symbol indicates that the vents are
open. Moving the side control to this
direction will open the vents.
: This symbol indicates that the vents are
closed. Moving the side control to this
direction will close the vents.
Adjust the air flow direction of the ventilators by moving
the center knob (up/down, left/right) until the desired
position is achieved.
T32A130827-B6B49E34-3817-4359-BDE6-6C6EB1F60D3D
WARNING:
. The heater and air conditioner operate only
when the engine is running.
. Never leave children or adults who would
normally require the support of others alone
in the vehicle. Pets should not be left alone
either. They could unkno wingly activate
switches or controls and inadvertently be-
come involved in a serious accident and
injure themselves. On hot, sunny days,
temperatures in a closed vehicle could
quickly become high enough to cause se-
vere or possibly fatal injuries to people or
animals.
. Do not use the recirculation mode for long
periods as it may cause the interior air to
become stale and the windows to fog up.
. Do not adjust the heating and air condition-
ing controls while driving so that full atten-
tion may be given to vehicle operation.
The heater and air conditioner operate when the
engine is running. The air blower will operate even if
the engine is turned off and the ignition switch is
placed in the “ON” position.
NOTE:
. Odors from inside and outside the vehicle
can build up in the air conditioner unit. Odor
can enter the passenger compartment
through the vents.
. When parking, set the heater and air condi-
tioner controls to turn off air recirculation to
allow fresh air into the passenger compart-
ment. This should help reduce odors inside
the vehicle.
HEATER AND AIR CONDITIONER
Condition: 'Except for China'/
(181,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
For models with Stop/Start System or Idling
Stop System:
While the engine is stopped by the Stop/Start System
or the Idling Stop System, switching the airflow to the
front defogger will cause the engine to automatically
restart.
While the engine is running, selecting airflow to the
front defogger will prevent the Stop/Start System or
Idling Stop System from automatically stopping the
engine.
When the engine is stopped by the Stop/Start System
or Idling Stop System, heater and air conditioner
performance may be reduced. To keep full heater and
air conditioner performance, restart the engine by
pushing the Stop/Start System OFF switch or the
Idling Stop System OFF switch, or by placing the
ignition switch in the “ON” position. For more details
see “Stop/Start System or Idling Stop System” (P.5-
18).
OPERATING TIPS (for automatic air condi-
tioner)
T32A130827-94E48E8C-CACC-4A8C-8478-31C17097E10D
JVH0727X
JVH0728X
When the engine coolant temperature and outside air
temperature are low, the air flow from the foot outlets
may not operate. However, this is not a malfunction.
After the coolant temperature warms up, the air flow
from the foot outlets will operate normally.
The sensors
*
1
and
*
2
, located on the instrument
panel, help maintain a constant temperature. Do not
put anything on or around the sensors.
Display screen, heater and air conditioner, and audio system 4-27
Condition: 'Except for China'/
(182,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
4-28 Display screen, heater and air conditioner, and audio system
MANUAL AIR CONDITIONER AND HEATER (Type A)
T32A130827-FC419F29-59C8-4324-B0B6-C961B2FBC0DF
JVH0664X
1. “A/C” button/Fan speed control “
” dial
2. Air flow control buttons
3. “MAX A/C” button/Temperature control dial
4. Front defogger “
” button
5. Rear defogger “ ” button (See “Defogger
switch” (P.2-49).)
6. Air recirculation “
” button
For models with Stop/Start System or Idling Stop
System:
The Stop/Start System or Idling Stop System will not
activate when the front defogger is turned on.
Controls
T32A130827-429D575F-97C2-4BE3-AA18-DE7034F2134F
Turning system on/off:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
To turn on the system, turn the fan speed control
“
” dial out of the OFF position. Turn the dial
counterclockwise to the OFF position to turn off the
system.
Fan speed control:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Turn the fan speed control “ ” dial clockwise to
increase the fan speed.
Turn the fan speed control “
” dial counterclock-
wise to decrease the fan speed.
Temperature control:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Turn the temperature control dial to set the desired
temperature. Turn the dial between the middle and the
right position to select the hot temperature. Turn the
dial between the middle and the left position to select
the cool temperature.
Air flow control:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push one of the air flow control buttons to select the air
flow outlets.
— Air flows mainly from center and side
ventilators.
— Air flows mainly from center and side
ventilators and foot outlets.
— Air flows mainly from the foot outlet and
partly from the defogger.
— Air flows mainly from the defogger and foot
outlets.
Outside air circulation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the air recirculation “ ” button. (The indicator
light will turn off.) The air flow is drawn from outside the
vehicle.
Select the outside air circulation mode for normal
heating or air conditioning operation.
Air recirculation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the air recirculation “ ” button on. (The
indicator light will illuminate.)
The air will recirculate inside the vehicle.
A/C (Air Conditioner) operation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the “A/C” button to turn on or off the air
conditioner. When the air conditioner is on, the “A/C”
indicator light on the button illuminates.
MAX A/C (Quick Air Conditioning) operation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the “MAX A/C” button for quick cooling and
dehumidifying.
When the MAX A/C mode is turned on, the air flow
mode indicator will turn off with the air flow mode fixed
at “
”.
At the same time, the indicator light on the “A/C”
button and the air recirculation mode will turn on.
Condition: 'Except for China'/
(183,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Push the “MAX A/C” button again to turn off the MAX
A/C mode. When the MAX A/C mode is turned off,
most of the settings will return to the previous state,
while the indicator light on the “A/C” button will stay
on.
Heater operation
T32A130827-412153F7-6002-440B-857B-25C8DA4A03B9
Heating:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This mode is used to direct heated air from the foot
outlets.
1. Push the air recirculation “
” button for normal
heating. (The indicator light will turn off.)
2. Push the “
” button. (The indicator light will
turn on.)
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
Ventilation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This mode directs outside air from the side and center
ventilators.
1. Push the air recirculation “
” button. (The
indicator light will turn off.)
2. Push the “
” button. (The indicator light will
turn on.)
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position.
Defrosting or defogging:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This mode directs the air to the defogger outlets to
defrost/defog the windows.
1. Turn the fan speed control “
” dial to the
desired position.
2. Push the air recirculation “
” button. (The
indicator light will turn off.)
3. Push the front defogger “
” button. (The
indicator light will turn on.)
4. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
To remove frost from the windshield quickly, turn
the temperature control dial to the maximum hot
(right) position and the fan speed control “
”
dial to the maximum position.
Heating and defogging:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This mode heats the interior and defogs the windows.
1. Push the air recirculation “
” button. (The
indicator light will turn off.)
2. Push the “
” button. (The indicator light will
turn on.)
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the maximum
hot (right) position.
Air conditioner operation
T32A130827-8C97504D-2DD0-4F8E-8F69-8C25B837FB86
The air conditioner system should be operated for
approximately 10 minutes at least once a month. This
helps prevent damage to the air conditioner system
due to the lack of lubrication.
Cooling:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This mode is used to cool and dehumidify the air.
1. Push the air recirculation “
” button. (The
indicator light will turn off.)
2. Push the “
” button. (The indicator light will
turn on.)
3. Turn the fan speed control “
” dial to the
desired position.
4. Push the “A/C” button. (The indicator light will turn
on.)
5. Turn the temperature control dial to the desired
position between the middle and the cool (left)
position.
A visible mist may be seen coming from the ventilators
in hot, humid conditions as the air is cooled rapidly.
This does not indicate a malfunction.
Dehumidified heating:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This mode is used to heat and dehumidify the air.
1. Push the air recirculation “
” button. (The
indicator light will turn off.)
2. Push the “
” button. (The indicator light will
turn on.)
3. Turn the fan speed control “
” dial to the
desired position.
4. Push the “A/C” button. (The indicator light will turn
on.)
Display screen, heater and air conditioner, and audio system 4-29
Condition: 'Except for China'/
(184,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
4-30 Display screen, heater and air conditioner, and audio system
5. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
Dehumidified defogging:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This mode is used to defo g the windows and
dehumidify the air.
1. Push the air recirculation “
” button. (The
indicator light will turn off.)
2. Push the front defogger “
” button. (The
indicator light on the front defogger “
” button
will turn on.)
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position.
MANUAL AIR CONDITIONER AND HEATER (Type B)
GUID-28D6F171-7D3A-4518-A42A-FF5C4C8E7D11
JVH0827X
1. Fan speed control “
” dial
2. Front defogger “
MAX” button
3. “A/C” button
4. Air recirculation “
” button
5. Rear window defogger “ ” button (S ee
“Defogger switch” (P.2-49).)
6. Temperature control dial
7. Air flow control buttons
For models with Stop/Start System or Idling Stop
System:
The Stop/Start System or Idling Stop System will not
activate when the front defogger is turned on.
Controls
GUID-73F40F20-B1C0-426E-9749-0BB63E8A0C57
Turning system on/off:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
To turn on the system, turn the fan speed control
“
” dial out of the OFF position. Turn the dial
counterclockwise to the OFF position to turn off the
system.
Fan speed control:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Turn the fan speed control “ ” dial clockwise to
increase the fan speed.
Turn the fan speed control “
” dial counterclock-
wise to decrease the fan speed.
Temperature control:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Turn the temperature control dial to set the desired
temperature. Turn the dial between the middle and the
right position to select the hot temperature. Turn the
dial between the middle and the left position to select
the cool temperature.
Condition: 'Except for China'/
(185,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Air flow control:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the air flow control buttons to select the air flow
outlets. More than one air flow control button can be
selected at a time.
— Air flows mainly from center and side
ventilators.
— Air flows mainly from the foot outlet.
— Air flows mainly from the front defogger.
MAX defogging/defrosting:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the front defogger “ MAX” button to turn on
the MAX defogging/defrosting mode and quickly
defog/defrost t he windshield. When this mode is
turned on, the “A/C” indicator light will turn on and
the air circulation will be fixed at the outside air
circulation mode. The “
” indicator light will also
turn on. For the best performance, turn the temperature
control dial to the maximum hot position and set the fan
speed at its maximum.
Outside air circulation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the air recirculation “ ” button. (The indicator
light will turn off.) The air flow is drawn from outside the
vehicle.
Select the outside air circulation mode for normal
heating or air conditioning operation.
Air recirculation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the air recirculation “ ” button. (The indicator
light will illuminate.)
The air will recirculate inside the vehicle.
A/C (Air Conditioner) operation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the “A/C” button to turn on or off the air
conditioner. When the air conditioner is on, the “A/C”
indicator light on the button illuminates.
Heater operation
GUID-27D496D2-F250-415F-9ECB-62699E32F467
Heating:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This mode is used to direct heated air from the foot
outlets.
1. Push the air recirculation “
” button for normal
heating. (The indicator light will turn off.)
2. Push the “
” button. (The indicator light will
turn on.)
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
Ventilation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This mode directs outside air from the side and center
ventilators.
1. Push the air recirculation “
” button. (The
indicator light will turn off.)
2. Push the “
” button. (The indicator light will
turn on.)
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
Heating and defogging:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This mode heats the interior and defogs the windows.
1. Push the air recirculation “
” button. (The
indicator light will turn off.)
2. Push the “
” and “ ” buttons. (The
indicator lights will turn on.)
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
Air conditioner operation
GUID-67E5EEF5-BEB9-40BA-B38F-3675647881AC
The air conditioner system should be operated for
approximately 10 minutes at least once a month. This
helps prevent damage to the air conditioner system
due to the lack of lubrication.
Cooling:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This mode is used to cool and dehumidify the air.
1. Push the air recirculation “
” button. (The
indicator light will turn off.)
2. Push the “
” button. (The indicator light will
turn on.)
3. Turn the fan speed control “
” dial to the
desired position.
4. Push the “A/C” button. (The indicator light will turn
on.)
5. Turn the temperature control dial to the desired
position between the middle and the cool (left)
position.
A visible mist may be seen coming from the ventilators
in hot, humid conditions as the air is cooled rapidly.
This does not indicate a malfunction.
Dehumidified heating:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This mode is used to heat and dehumidify the air.
1. Push the air recirculation “
” button. (The
indicator light will turn off.)
2. Push the “
” button. (The indicator light will
turn on.)
Display screen, heater and air conditioner, and audio system 4-31
Condition: 'Except for China'/
(186,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
4-32 Display screen, heater and air conditioner, and audio system
3. Turn the fan speed control “ ” dial to the
desired position.
4. Push the “A/C” button. (The indicator light will turn
on.)
5. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
AUTOMATIC AIR CONDITIONER AND HEATER (Type A)
T32A130827-85B04328-ADD4-438F-A65C-AE08E4511EBC
JVH0665X
1. Front defogger “
” button
2. “ON·OFF” button/Temperature control dial (for
left side seat)
3. “MODE” button
4. Display screen
5. “A/C” (Air Conditioner) button
6. “DUAL” button/Temperature control dial (for
right side seat)
7. Rear defogger “
” button (See “Defogger
switch” (P.2-49).)
8. Air recirculation “
” button
9. Fan speed control “
” button
10. “AUTO” button
11. Outside air circulation “ ” button
For models with Stop/Start System or Idling Stop
System:
The Stop/Start System or Idling Stop System will not
activate when the front defogger is turned on.
Turning the system on/off
GUID-52844401-F759-4093-80F2-A7F75F780409
Push the “ON·OFF” button to turn on and off the
system.
Automatic operation (AUTO)
T32A130827-2F5CE8FD-C9DC-41D9-8AC9-3D88D8BC61F7
The AUTO mode may be used year-round as the
system automatically controls the air conditioner to a
constant temperature, air flow distribution and fan
speed after the desired temperature is set manually.
Cooling and dehumidified heating:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. Push the “AUTO” button (the indicator light will
turn on).
2. Turn the temperature control dial to set the desired
temperature.
.
When the DUAL indicator light is not illumi-
nated, pushing the “DUAL” button (the indica-
tor light will turn on) allows the user to
independently change the driver and passen-
ger side temperatures with the corresponding
temperature control dial.
.
To cancel the separate temperature setting,
push the “DUAL” button (the indicator light will
Condition: 'Except for China'/
(187,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
turn off) and the driver’s side temperature
setting will be applied to both the driver and
passenger sides.
3. Push and hold either the outside air circulation
“
” button or the air recirculation “ ” button
to switch to the automatic air intake control mode.
A visible mist may be seen coming from the ventilators
in hot, humid conditions as the air is cooled rapidly.
This does not indicate a malfunction.
Dehumidified defrosting/defogging:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. Push the fr ont defogger “ ” button (The
indicator light on the front defogger “
” button
will illuminate).
2. Turn the temperature control dial to set the desired
temperature.
. To quickly remove frost from the outside surface of
the windshield, set the temperature control and
the fan speed to the maximum levels.
. After the windshield is cleared, push the “AUTO”
button again (the AUTO indicator light will turn
on).
. When the front defogger “
” button is pushed,
the air conditioner will turn on when the outside air
temperature is above approximately −28C (288F)
to defog the windshield. The air recirculation mode
will automatically turn off. The outside air circula-
tion mode “
” will be selected to improve the
defogging performance.
Do not set the temperature too low when the front
defogger mode is on (the “
” indicator light is
illuminated), because doing so may fog up the
windshield.
Manual operation
T32A130827-10CD41C0-BC89-4653-8476-6F13251D5996
The manual mode can be used to control the heater
and air conditioner to your desired settings.
To turn off the heater and air conditioner, push the
“ON·OFF” button.
Fan speed control:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the fan speed control button (“ ” side or
“
” side) to manually control the fan speed.
Push the “AUTO” button to change the fan speed to
the automatic mode.
Air flow control:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the “MODE” button to select the desired mode:
— Air flows mainly from the center and side
ventilators.
— Air flows mainly from the center and side
ventilators and foot outlets.
— Air flows mainly from the foot outlet and
partly from the defogger.
— Air flows mainly from the front defogger
outlets and foot outlets.
Temperature control:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Turn the temperature control dial to set the desired
temperature.
. When the DUAL indicator light is not illuminated,
pushing the “DUAL” button (the indicator light will
turn on) allows the user to independently change
the driver and passenger side temperatures with
the corresponding temperature control dial.
. To cancel the separate temperature setting, push
the “DUAL” button (the indicator light will turn off)
and the driver’s side temperature setting will be
applied to both the driver and passenger sides.
Outside air circulation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the outside air circulation “ ” button to draw
the air flow from outside the vehicle. (The indicator light
will turn on.)
Air recirculation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the air recirculation “ ” button to circulate the
air flow inside the vehicle. (The indicator light will turn
on.)
Automatic air intake control:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push and hold either the outside air circulation “ ”
or the air recirculation “
” button. The air intake will
then be controlled automatically. When the automatic
control is set, the system automatically alternates
between the outside air circulation “
” and the air
recirculation “
” modes. (The indicator light of the
active mode will turn on.)
Display screen, heater and air conditioner, and audio system 4-33
Condition: 'Except for China'/
(188,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
4-34 Display screen, heater and air conditioner, and audio system
AUTOMATIC AIR CONDITIONER AND HEATER (Type B)
GUID-716C96C3-AD2B-493D-90AC-56FCFAD9D514
JVH0828X
1. “A/C” (Air Conditioner) button
2. Front defogger “
MAX” button
3. Air recirculation “
” button
4. Fan speed control “ ” button
5. “ON·OFF” button
6. Rear defogger “ ” button (See “Defogger
switch” (P.2-49).)
7. “AUTO” button/Temperature control dial (for left
side seat)
8. Air flow control buttons
9. “DUAL” button/Temperature control dial (for
right side seat)
For models with Stop/Start System or Idling Stop
System:
The Stop/Start System or Idling Stop System will not
activate when the front defogger is turned on.
Turning the system on/off
GUID-F0128C93-C9B7-4E12-BD05-60A604123F33
Push the “ON·OFF” button to turn on and off the
system.
Automatic operation (AUTO)
GUID-65E0AA79-2234-4399-9B3F-CEB0E8E50104
The AUTO mode may be used year-round as the
system automatically controls the air conditioner to a
constant temperature, air flow distribution and fan
speed after the desired temperature is set manually.
Cooling and dehumidified heating:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. Push the “AUTO” button (the indicator light will
turn on).
2. Turn the temperature control dial to set the desired
temperature.
.
When the DUAL indicator light is not illumi-
nated, pushing the “DUAL” button (the indica-
tor light will turn on) allows the user to
independently change the driver and passen-
ger side temperatures with the corresponding
temperature control dial.
.
To cancel the separate temperature setting,
push the “DUAL” button (the indicator light will
turn off) and the driver’s side temperature
setting will be applied to both the driver and
passenger sides.
A visible mist may be seen coming from the ventilators
in hot, humid conditions as the air is cooled rapidly.
This does not indicate a malfunction.
MAX defrosting/defogging:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the front defogger “ MAX” button to turn on
the MAX defogging/defrosting mode and quickly
defog/defrost t he windshield. When this mode is
turned on, the fan will be at its maximum speed, the
“A/C” indicator light will turn on, and the air circulation
will be fixed at the outside air circulation mode.
Do not set the temperature too low when the front
defogger mode is on (the “
MAX” indicator light is
illuminated), because doing so may fog up the
windshield.
Manual operation
GUID-DDBBC2D9-339D-41EC-9AB4-04B6DAA9F08F
The manual mode can be used to control the heater
and air conditioner to your desired settings.
Fan speed control:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the fan speed control button (“ ” side or
“
” side) to manually control the fan speed.
Air flow control:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push one of the air flow control buttons to select or
deselect the air flow outlets. More than one air flow
control button can be selected at a time.
— Air flows mainly from the center and side
ventilators.
— Air flows mainly from the foot outlet and
partly from the defogger.
— Air flows mainly from the front defogger
outlets.
Condition: 'Except for China'/
(189,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Temperature control:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Turn the temperature control dial to set the desired
temperature.
. When the DUAL indicator light is not illuminated,
pushing the “DUAL” button (the indicator light will
turn on) allows the user to independently change
the driver and passenger side temperatures with
the corresponding temperature control dial.
. To cancel the separate temperature setting, push
the “DUAL” button (the indicator light will turn off)
and the driver’s side temperature setting will be
applied to both the driver and passenger sides.
Outside air circulation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
To turn on the outside air circulation mode, push the air
recirculation “
” button. (The indicator light will turn
off.) The air flow is drawn from outside the vehicle.
Select the outside air circulation mode for normal
heating or air conditioning operation.
Air recirculation:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push the air recirculation “ ” button to circulate the
air flow inside the vehicle. (The indicator light will turn
on.)
SERVICING AIR CONDITIONER
T32A130827-02B6A735-AE1C-4FF1-853B-0711EFF486D2
WARNING:
The air conditioner system contains refrigerant
under high pressure. To avoid personal injury,
any air conditioner service should be done only
by an experienced technician with the proper
equipment.
The air conditioner system in your vehicle is charged
with a refrigerant designed with the environment in
mind.
This refrigerant will not harm the earth’s ozone
layer. However, it may contribute in a small part to
global warming.
Special charging equipment and lubricant are required
when servicing your vehicle’s air conditioner. Using
improper refrigerants or lubricants will cause severe
damage to the air conditioner system. (See “Air
conditioner system refrigerant and lubricant” (P.9-5).)
A NISSAN de aler wi ll be able to servi ce your
environmentally friendly air conditioner system.
Air conditioner filter
T32A130827-BC1D1D75-3B43-4C79-840F-3711FA078F40
The air conditioner system is equipped with an air
conditioner filter. To make sure the air conditioner
heats, defogs, and ventilates efficiently, replace the
filter according the specified maintenance intervals
listed in a separate maintenance booklet. To replace
the filter, contact a NISSAN dealer.
The filter should be replaced if the air flow decreases
significantly or if windows fog up easily when operating
the heater or air conditioner.
T32A130827-CF902764-54DB-460C-9CCD-891B42007577
AUDIO OPERATION PRECAUTIONS
T32A130827-4E34C5BD-9452-4AC0-A824-D0DEB1BDEF8C
WARNING:
Do not adjust the audio system while driving so
that full attention may be given to v ehicle
operation.
Radio
T32A130827-06011993-01E3-49CF-A636-2952299CE1E0
. Radio reception is affecte d by station signal
strength, distance from radio transmitter, build-
ings, bridges, mountain s and other ex ternal
influences. Intermittent changes in reception
quality normally are caused by these external
influences.
. Using a cellular phone in or near the vehicle may
influence radio reception quality.
. Some cellular phones or other devices may cause
interference or a buzzing noise to come from the
audio system speakers. Storing the device in a
different location may reduce or eliminate the
noise.
Compact Disc (CD) player
T32A130827-868CE57C-F62C-4BE4-8BE4-61333EF23B5F
. During cold weather or rainy days, the player may
malfunction due to the humidity. If this occurs,
remove the CD from CD player and dehumidify or
ventilate the player completely.
. The player may skip while driving on rough roads.
. The CD player sometimes may not function when
the passenger compartment temperature is ex-
tremely high. Lower the temperature before use.
. Do not expose the CD to direct sunlight.
. CDs that ar e of p oor quality, or are dirty,
scratched, covered with fingerprints, or that have
pin holes may not work properly.
Display screen, heater and air conditioner, and audio system 4-35
AUDIO SYSTEM (if equipped)
Condition: 'Except for China'/

Related Topics

Display screen, heater and air conditioner, and audio system
Safety precautions Center multi-function control panel (models with navigation system) Vehicle information and settings (models with navigation system) RearView Monitor (if equipped) Around view monitor (if equipped) Ventilators Audio system (if equipped) NissanConnect App smartphone integration (if equipped) Car phone or CB radio Bluetooth? Hands-Free Phone System (Type A) Bluetooth? Hands-Free Phone System (Type B) Bluetooth? Hands-Free Phone System (Type C) Bluetooth? Hands-Free Phone System (Type D) Voice Recognition system (if equipped)

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot