Get Display screen, heater and air conditioner, and audio system -> Bluetooth? Hands-Free Phone System (Type C) Guide for Nissan X Trail SUV Second Generation (2007-2012)

(241,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

. “End Other Call”

Select this command to stay with the second call

and end the original call.

Push the

/ button to accept the call. Push the

button to reject the call.

Ending a call

GUID-298028E5-33AA-4342-A375-2A3AE30D549B

To end an active call, push the button.

Bluetooth

SETTINGS

GUID-E7AF4B3C-02C1-4F95-9887-CB74CBB3EB4E

To access and adjust the settings for the Bluetooth

Hands-Free Phone System;

1. Push the ENTER/SETTING button.

2. Use the TUNE·FOLDER dial to select “Bluetooth”

and then push the ENTER/SETTING button.

Available setting items:

. Bluetooth

Select “On” or “Off” to turn the vehicle’s Blue-

tooth

system on or off.

. Add Phone or Device

For operation to connect a phone to the system,

see “CD player/Radio (Type C)” (P.4-57) or “CD

player/Radio (Type D)” (P.4-63).

. Delete Phone or Device

Select to delete a phone from the displayed list.

The system will ask to confirm before deleting the

phone.

NOTE:

When you delete a phone, the associated

phonebook for the phone will also be

deleted.

. Replace Phone

Select to replace a phone from the displayed list.

When a selection is made, the system will ask to

confirm before proceeding. The recorded phone-

book for the phone being deleted will be saved as

long as the new phone’s phonebook is the same

as the old phone’s phonebook.

. Select Phone or Device

Select to connect to a previously connected

phone from the displayed list.

. Phonebook Download

Select to turn on or off the automatic download of

a connected phone’s phonebook.

. Show Incoming Calls

Select “Driver Only” to have incoming call

information displayed only in the vehicle informa-

tion display. Select “Both” to have incoming call

information displayed in both the vehicle informa-

tion display and the center display screen.

GUID-2FF81B79-FF09-4E7B-ABE3-1FA515BEB80D

* Type C is for models without navigation system

(with color display for Mexico).

WARNING:

. Use a phone after stopping your vehicle in a

safe location. If you have to use a phone

while driving, exercise extreme caution at all

times so f ull at tention may b e given to

vehicle operation.

. If you are unable to devote full attention to

v ehicle o peration while talking on the

phone, pull off the road to a safe location

and stop your vehicle.

CAUTION:

To avoid draining the vehicle battery, use a

phone after starting the engine.

Your NISSAN is equipped with the Bluetooth

Hands-

Free Phone System. If you have a compatible Blue-

tooth

enabled cellular phone, you can set up the

wireless connection between your cellular phone and

the in-vehicle phone module. With Bluetooth

wireless

technology, you can make or receive a hands-free

telephone call with your cellular phone in the vehicle.

Once your cellular phone is connected to the in-

vehicle phone module, no other phone connecting

procedure is required. Your phone is automatically

connected with the in-vehicle phone module when the

ignition switch is placed in the “ON” position with the

previously connected cellular phone turned on and

carried in the vehicle.

Display screen, heater and air conditioner, and audio system 4-87

Bluetooth

HANDS-FREE PHONE

SYSTEM (Type C)

Condition: 'Except for China'/

(242,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-88 Display screen, heater and air conditioner, and audio system

NOTE:

Some devices require the user to accept con-

nections to other Bluetooth

devices. If your

phone does not connect automatic ally to the

system, consult the phone’s Owner’s Manual for

details on device operation.

You can connect up to 5 different Bluetooth

cellular

phones to the in-vehicle phone module. However, you

can talk on only one cellular phone at a time.

Before using the Bluetooth

Hands-Free Phone

System, refer to the following notes.

. Set up the wireless connection between a

compatible cellular phone and the in-vehicle

phone module before using the hands-free phone

system.

. Some Bluetooth

enabled cellular phones may not

be recognized or work properly. For information

about Bluetooth

devices that are available for use

with this system, contact a NISSAN dealer.

. You will not be able to use a hands-free phone

under the following conditions:

— Your vehicle is outside of the cellular service

area.

— Your vehicle is in an area where it is difficult to

receive a cellular signal; such as in a tunnel, in

an underground parking garage, near a tall

building or in a mountainous area.

. When the radio wave condition is not ideal or

ambient sound is too loud, it may be difficult to

hear the other person’s voice during a call.

. Do not place the cellular phone in an area

surrounded by metal or far away from the in-

vehicle phone module to prevent tone quality

degradation and wireless connection disruption.

. While a cellular phone is connected through the

Bluetooth

wireless connection, the battery power

of the cellular phone may discharge quicker than

usual. The Bluetooth

Hands-Free Phone System

cannot charge cellular phones.

. If the hands-free phone system seems to be

malfunctioning, see “Troubleshooting guide” in

this section. You can also visit www.nissanusa.

com/bluetooth for troubleshooting help.

. Some cellular phones or other devices may cause

interference or a buzzing noise to come from the

audio system speakers. Storing the device in a

different location may reduce or eliminate the

noise.

. Refer to the cellular phone Owner’s Manual

regarding the telephone charges, cellular phone

antenna and body, etc.

REGULATORY INFORMATION

GUID-1CBA5F83-0C98-429E-9654-010E9EC00160

FCC Regulatory information

GUID-F6BFECAE-AF9C-41FB-AAE9-3F320CE2E319

. CAUTION: To maintain compliance with FCC’s RF

exposure guidelines, use only the supplied anten-

na. Unauthorized antenna, modification, or attach-

ments could damage the transmitter and may

violate FCC regulations.

. Operation is subject to the following two condi-

tions:

1) this device may not cause interference and

2) this device must accept any interference,

including interference that may cause unde-

sired operation of the device.

IC Regulatory information

GUID-F2AD25CA-DAC0-4F0F-87DA-0B4C0A21ECE4

. Operation is subject to the following two condi-

tions:

1) this device may not cause interference, and

2) this device must accept any interference,

including interference that may cause unde-

sired operation of the device.

. This Class B digital apparatus meets all require-

ments of the Canadian Interference- Causing

Equipment Regulations.

Bluetooth

trademark

GUID-9C01AC48-D6C7-4C2A-A3F6-D7A1B29AC727

Bluetooth

is a trademark owned

by Bluetooth SIG, Inc. and li-

censed to Visteon.

Condition: 'Except for China'/

(243,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

USING THE SYSTEM

GUID-81FDC308-C6F5-48F9-A648-DF3513C71F39

The voice recognition sys tem allows hands- free

operation of the Bluetooth

Phone System.

If the vehicle is in motion, some commands may not be

available so full attention may be given to vehicle

operation.

Control buttons and microphone

GUID-78B41662-4ED3-421C-A2E2-5585ED09A93D

Control buttons

JVH0906X

1. Tuning

switch:

While using the voice recognition system, tilt the

tuning switch up or down to manually control the

phone system.

2. Volume control

-/ + buttons:

3. Phone send

button:

Push the

button to initiate a VR session or

answer an incoming call.

You can also use the

button to interrupt the

system feedback and give a command at once.

See “List of voice commands” and “During a call”

in this section for more information.

4. Phone end

button:

While the voice recognition system is active, push

and hold the

button for 5 seconds to quit the

voice recognition system at any time.

Microphone:

Microphone is located near the map lights.

MANUAL CONTROL:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

While using the Voice Recognition system, it is

possible to select menu options by using the steering

wheel controls instead of speaking voice commands.

To activate manual control mode, push the

button

on the steering wheel to access the phone menu and

then push either up or down the

switch.

The manual control mode does not allow dialing a

phone number by digits. The user may select an entry

from the Phonebook or Recent Calls lists. To reactivate

Voice Recognition, exit the manual control mode by

pushing and holding the

button. At that time,

pushing the

button will start the Hands Free

Phone System.

Choosing a language

GUID-55409756-DE99-4448-814F-B9F02E D0DCBA

You can interact with the Bluetooth

Hands-Free

Phone System using several languages that are

available. For operations to change the language, see

“Audio main operation” (P.4-58).

Changing voice feedback volume

GUID-2A7A4417-6352-448C-8ED4-2D571A4FD1C8

If you want to adjust the volume of the voice feedback,

push the (

-/ +) button on the steering wheel

while being provided with feedback. You can also use

the Power/VOL dial on the audio unit.

Initialization

GUID-8EE4D1D7-A9E4-45FA-A273-E3916CD6C61C

When the ignition switch is placed in the ON position,

voice recognition is initialized, which takes a few

seconds. If the

button is pushed before the

initializati on completes, the system will announce

“Hands-free phone system not ready” and will not

react to voice commands.

Connecting procedure:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

NOTE:

The connecting procedure must be performed

when the vehicle is stationary. If the vehicle

starts moving during the procedure, the proce-

dure will be cancelled.

You can register up to 5 different Bluetooth

cellular

phones in the in-vehicle phone module. However, you

can talk on only one cellular phone at a time.

To connect a phone to the Bluetooth

Hands-Free

Phone System;

1. Push the ENTER/SETTING button.

2. Use the TUNE·FOLDER dial to select “Bluetooth”

and then push the ENTER/SETTING button.

3. Select “Add Phone or Device” and then push the

ENTER/SETTING button.

4. When a message with a PIN appears on the

screen, operate the Bluetooth

phone to enter the

PIN.

The connecting procedure varies according to each

phone. See the phone’s Owner’s Manual for details.

Display screen, heater and air conditioner, and audio system 4-89

Condition: 'Except for China'/

(244,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-90 Display screen, heater and air conditioner, and audio system

Giving voice commands

GUID-6FF5F905-2477-4A3E-8D69-6D6688FC945D

To operate voice recognition, push and release

the

button located on the steering wheel. After

the tone sounds, speak a command.

The command given is picked up by the microphone,

and voice feedback is given when the command is

accepted.

. If you need to hear the available commands for the

current menu again, say “Help” and the system will

repeat them.

. If a command is not recognized, the syst em

announces, “Command not recognized. Please

try again.” Make sure the command is said exactly

as promp ted by the system and repeat the

command in a clear voice.

. If you want to go back to the previous command,

you can say “Go back” or “Correction” any time

the system is waiting for a response.

. You can cancel a command when the system is

waiting for a response by saying, “Cancel” or

“Quit.” The system announces “Cancel” and ends

the VR session. You can also push and hold the

button on the steering wheel for 5 seconds

at any time to end the VR session. Whenever the

VR session is cancelled, a double beep is played

to indicate you have exited the system.

. If you want to adjust the volume of the voice

feedback, push the (

- or +) button on

the steering wheel while being provided with

feedback. You can also use the radio volume

control knob.

Voice Prompt Interrupt:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

In most cases you can interrupt the voice feedback to

speak the next command by pushing the

button

on the steering wheel. After interrupting the system,

wait for a beep before speaking your command.

One Shot Call:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To use the system faster, you may speak the second

level commands with the main menu command on the

main menu. For example, push the

button and

after the tone say, “Call Redial”.

Operating tips:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To get the best performance out of the voice

recognition system, observe the following:

. Keep the interior of the vehicle as quiet as

possible. Close the windows to eliminate sur-

rounding noises (traffic noises, vibration sounds,

etc.), which may prevent the system from recog-

nizing voice commands correctly.

. Wait until the tone sounds before speaking a

command. Otherwise, the command will not be

received properly.

. Start speaking a command within 5 seconds after

the tone sounds.

. Speak in a natural voice without pausing between

words.

Voice commands

GUID-7CCBCEC6-67F0-42B2-B2C0-8F3F10B6AB67

Voice commands can be used to operate the Blue-

tooth

Hands-Free Phone System. Push the

button and say “Phone” to bring up the phone

command menu. The available options are:

. Call

. Phonebook

. Recent Calls

. Messaging (if equipped)

. Show Applications (if equipped)

. Select Phone

Call:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

For more information on the “Call” command, see

“Making a call” (P.4-91).

Phonebook:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The following commands are available under “Phone-

book”:

. (a name)

Say a name in the phonebook to bring up a list of

options for that phonebook entry. The system will

say the name it interpreted based on the voice

command provided. If the name is incorrect, say

“Correction” to hear another name.

Once the correct phonebook entry is identified,

say “Dial” to dial the number or “Send Text” to

send a text message to that number. Say “Record

Name” to record a name for the phonebook entry.

Say “Delete Recording” to delete a recorded

name for the phonebook entry.

. List Names

Speak this command to have the system list the

names in the phonebook one by one alphabeti-

cally. Say “Dial” to dial the number of the current

name or “Send Text” to send a text message to

that number. Say “Next Entry” or “Previous Entry”

to move through the list alph abetically. Say

“Record Name” to record a name for the current

pho nebook entry. Say “Delete Recording” to

delete a recorded name for the current phonebook

entry.

Condition: 'Except for China'/

(245,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

. Transfer Entry

This command can be used to transfer multiple

contacts at a time. To enable manual contact

transfer capability, set “Phonebook Download” to

“Off” in the Setting menu. The ability to transfer

contacts via the OPP Bluetooth

profile depends

on your mobile phone. See your phone’s Owner’s

Manual for details and instructions.

. Delete Entry

Speak this command to delete an entry in the

phonebook. Choose an entry to delete by speak-

ing the desired name or say “List Names”.

Recent Calls:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The following commands are available under “Recent

Calls”:

. Incoming Calls

Speak this command to list the last five incoming

calls to the vehicle. If the call is from an entry in the

phonebook, the name will be displayed. Other-

wise, the phone number of the incoming call will

be displayed.

Say “Dial” to call the number or “Send Text” to

send a text message to that number. Say “Next

Entry” or “Previous Entry” to move through the list

of incoming calls.

. Missed Calls

Speak this command to list the last five missed

calls to the vehicle. If the call is from an entry in the

phonebook, the name will be displayed. Other-

wise, the phone number of the missed call will be

displayed.

Say “Dial” to call the number or “Send Text” to

send a text message to that number. Say “Next

Entry” or “Previous Entry” to move through the list

of missed calls.

. Outgoing Calls

Speak this command to list the last five outgoing

calls from the vehicle. If the call was to an entry in

the phonebook, the name will be displayed.

Otherwise, the phone number of the outgoing call

will be displayed.

Say “Dial” to call the number or “Send Text” to

send a text message to that number. Say “Next

Entry” or “Previous Entry” to move through the list

of outgoing calls.

. Redial

Speak this command to call the last number

dialed.

. Call Back

Speak this command to call the number of the last

incoming call to the vehicle.

Messaging (if equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Speak this comma nd to access text messaging

functions. For more information on these commands,

see “Text messaging” (P.4-92).

Show Applications (if equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Speak this command to display list of smartphone

apps available.

NOTE:

Compatible smartphone and registration neces-

sary to access applications. See “NissanConnect

App smartphone integration” (P.4-74) for more

information.

Select Phone or Device:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Speak this command to select a phone to use from a

list of those phones connected to the vehicle.

Making a call

GUID-A7F864BF-CC9E-455F-973D-2E9C831A6D67

To make a call from a phone connected to the vehicle’s

Bluetooth

Hands-Free Phone System:

1. Push the

button.

2. The system will prompt you for a command. Say

“Call”.

3. Select one of the available voice commands to

continue:

(a name)

Speak the name of a phonebook entry to place

a call to that entry. The system will respond with

the name it interpreted from your command and

will prompt you to confirm that the name is

correct. Say “Yes” to initiate the call or “No” to

hear another name from the phonebook.

Number

Speak this command to place a call by

inputting numbers.

For 7- and 10-digit phone numbers, speak the

numbers. When finished, say “Dial” to initiate

the call. Say “Correction” at any time in the

process to correct a misspoken or misinter-

preted number.

For phone numbers with more digits or special

characters, say “Special Number”, then speak

the digits. Up to 24 digits can be entered.

Available special characters are “star”,

“pound”, “plus” and “pause”. When finished,

say “Dial” to initiate the call. Say “Correction” at

any time in the process to correct a misspoken

or misinterpreted number or character.

Redial

Speak this command to dial the number of the

last outgoing call. The system will display

Display screen, heater and air conditioner, and audio system 4-91

Condition: 'Except for China'/

(246,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

4-92 Display screen, heater and air conditioner, and audio system

“Redialing (name/number)”. The name of the

phonebook entry will be displayed if it available,

otherwise the number being redialed will be

displayed.

Call Back

Speak this command to dial the number of the

last i ncoming call. The system will display

“Calling back (name/number)” .The name of

the phonebook entry will be displayed if it

available, otherwise the number being called

back will be displayed.

Receiving a call

GUID-9007396D-F0C5-4030-AEBE-C6C6BAB6F713

When a call is received by the phone connected to the

vehicle’s Bluetooth

Hands-Free Phone System, the

call information is displayed on either the vehicle

information display or both the vehicle information

display and the control panel display.

Push the

button to accept the call. Push the

button to reject the call.

During a call

GUID-C5659119-BFD3-4698-87C9-0E15C45D2877

While a call is active, push the button to access

additional options. Speak one of the following com-

mands:

. Send

Speak this command followed by the digits to

enter digits during the phone call.

. Mute On or Mute Off

Speak the command to mute or unmute the

system.

. Transfer Call

Speak this command to transfer the call to the

handset. To transfer the call back from the handset

to the Bluetooth

Hands-Free Phone System,

push the

button and confirm when prompted.

If supported by the phone, the Bluetooth

Hands-Free

Phone System allows for call waiting functionality. If a

call is received while another call is already active, a

message will be displayed on the screen. Push the

button to hold the active call and switch to the

second call. Push the

button to reject the second

call.

While the second call is active, pushing the

button will allow the same commands that available

during any call as well as two additional commands:

. Switch Call

Speak this command to hold the second call and

switch back to the original call.

. End Other Call

Speak this command to stay with the second call

and end the original call.

Push the

button to accept the call. Push the

button to reject the call.

Ending a call

GUID-1CF536A5-E18C-4E40-A510-DB4BAB1A7225

To end an active call, push the button.

Text messaging

GUID-A384D87D-A652-4B2F-9BAF-0FE66591315D

WARNING:

. Laws in some jurisdictions may restrict the

use of some of the applications and fea-

tures, such as social networking and texting.

. Laws in some jurisdictions may restrict the

use of “Text-to-Speech”. Check local regula-

tions before using this feature.

. Use the text messaging feature after stop-

ping your vehicle in a safe location. If you

have to use the feature while dr iving,

exercise extreme caution at all times so full

attention may be given to vehicle operation.

. If you are unable to devote full attention to

vehicle operation while using the text mes-

saging feature, pull off the road to a safe

location and stop your vehicle.

NOTE:

This feature is automatically disabled if the

connected device does not support the Message

Access Profile (MAP). See the phone’s Owner’s

Manual for details and instructions.

The system allows for the sending and receiving of text

messages through the vehicle interface.

Sending a text message:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

1. Push the button.

2. Say “Messaging”.

3. Say “Send Text”.

4. The s ystem will provid e a list of avai lable

commands in order to determine the recipient of

the text message. Choose from the following:

(A name)

Number

Incoming Calls

Outgoing Calls

Missed Calls

If “Incoming Calls”, “Outgoing Calls”, or “Missed

Calls” is selected, the following additional com-

mands will be displayed:

Send Text

Condition: 'Except for China'/

(247,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

For more information about these options, see

“Voice commands” (P.4-90).

5. Once a recipient is chosen, the system prompts

for whi ch message to send. Five predefined

messages are available as well as three custom

messages. To choose one of the predefined

messages, speak one of the following:

“Driving, can’t text”

“Call me”

“On my way”

“Running late”

“Okay”

To send one of the custom messages, say

“Custom Message”. If more than one custom

message is stored, the system will prompt for the

number of the desired custom message. For more

information on setting and managing custom text

messages, see “Bluetooth

settings” (P.4-93).

Reading a received text message:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

1. Push the button.

2. Say “Messaging”.

3. Say “Read Text”.

The text message, sender and delivery time are shown

on the screen. Use the tuning switch on the steering

wheel to scroll through all text messages if more than

one are available. Push the

button to exit the text

message screen. Push the

button to access the

following options for replying to the text message:

. Call Back

Speak this command to call the sender of the text

message using the Bluetooth

Hands-Free Phone

System.

. Send Text

Speak this command to send a text message

response to the sender of the text message.

. Read Text

Speak this command to read the text message

again.

. Previous Text

Speak this command to move to the previous text

message (if available).

. Next Text

Speak this command to move to the next text

message (if available).

NOTE:

Text messages are only displayed if the vehicle

speed is less than 8 km/h (5 MPH).

Bluetooth

SETTINGS

GUID-2860D5C2-E46F-492A-A6E7-0D1F98AC6985

To access and adjust the settings for the Bluetooth

Hands-Free Phone System:

1. Push the SETTING button.

2. Use the TUNE·FOLDER knob to select “Blue-

tooth” and then push the ENTER/SETTING

button:

Bluetooth

Select “On” or “Off” to turn the vehicle’s

Bluetooth

system on or off.

Add Phone or Device

To connect a phone to the system, see

“Connecting procedure” (P.4-89).

Delete Phone or Device

Select to delete a phone from the displayed list.

The system will ask to confirm before deleting

the phone.

Replace Phone

Select to replace a phone from the displayed

list. When a selection is made, the system will

ask to confirm before proceeding. The re-

corded phonebook for the phone being deleted

will be saved as long as the new phone’s

phonebook is the same as the old phone’s

phonebook.

Select Phone or Device

Select to connect to a previously connected

phone from the displayed list.

Phonebook Download

Select to turn on or off the automatic download

of a connected phone’s phonebook.

Show Incoming Calls

Select “Driver Only” to have incoming call

information displayed only in the vehicle in-

formation display. Select “Both” to have

incoming call information displayed in both

the vehicle information display and the center

display screen

Text Message

Select to turn on or off the vehicle’s text

messaging feature.

New Text Sound

Select to adjust the volume of the sound that

plays when a new text is received by a phone

connected to the Bluetooth

Hands-Free

Phone System. The setting all the way to the

left indicates that the new text sound will be

muted.

Show Incoming Text

Select “Driver Only” to have incoming text

messages displayed only in the vehicle in-

Display screen, heater and air conditioner, and audio system 4-93

Condition: 'Except for China'/

Display screen, heater and air conditioner, and audio system -> Bluetooth? Hands-Free Phone System (Type C) for Your Nissan X Trail SUV Second Generation (2007-2012)

Related Topics

Popular Owner Manuals

Latest Owner Manuals