Driving
Extended Traffic Sign
Recognition
2. Select cruise control mode
3. Memorise the speed setting
6. Current speed limit indication
7. Next speed limit indication
For more information, refer to the
General recommendations on the use
of driving and manoeuvring aids.
Information displayed on the
instrument panel
Operating conditions
– Eligible roads: roads with separate
carriageways with prohibited access for
pedestrians and cyclists.
– Drive Assist 2.0 activated.
– Vehicle speed between 0 and 112 mph (0 and
180 km/h).
– Steering wheel properly held by the driver.
This additional system recognises these road
signs and displays them on the instrument panel
if the appropriate display mode is selected:
– No entry: when entering a lane in the wrong
direction, an alert message, including the symbol
of this sign, is displayed on the instrument panel
(request to check the direction of traffic).
– Other signs: as you approach it, the symbol
of the corresponding sign is displayed on the
instrument panel.
Memorising the speed setting
► Switch on the speed limiter 1-LIMIT or cruise
control 2.
Information related to the speed limiter or cruise
control is displayed.
When a new speed setting is detected, the
system displays the value and “OK?" to suggest
saving it as a new speed setting.
Without speed setting advance
recommendations
If there is a difference of less than 3 mph
(5 km/h) between the speed setting and
the speed displayed by the Road signs
recognition, the "OK?“ symbol is not
displayed.
The actual road signs always take priority
over the display from the system.
The signs must comply with the Vienna
Convention on road signs.
Depending on the road conditions, several
speeds may be displayed.
► Press 3-OK to confirm the new speed setting.
The display then reverts to its previous state.
Activation/Deactivation
With speed setting advance
recommendations
It is configured in the ADAS touch screen
application.
4. Current speed setting
5. Speed memorisation prompt
118
English 