Driving
The view type can be changed at any time
during the manoeuvre.
The system status is not saved when the ignition
is switched off.
Settings
Visiopark 1
6
In the side menu, this menu allows you to
carry out the following operations:
– adjust the volume of the audible signal.
– adjust the brightness.
For more information, refer to the
General recommendations on the use
of driving and manoeuvring aids.
Operating principle
– adjust the contrast.
When reverse gear is engaged, with the engine
running, this system displays views of the
vehicle's close surroundings on the touch screen
using a camera located at the rear of the vehicle.
Activation/Deactivation
To activate the camera, engage reverse gear.
The system is deactivated:
– when changing out of reverse gear.
– by pressing the cross in the top left-hand
corner of the touch screen.
Automatic zoom view
Using the camera, the vehicle's close
surroundings are recorded during low speed
manoeuvres.
An image from above the vehicle in its close
surroundings is created in real time (on the side
of the screen), as the vehicle progresses.
This view makes it easier to align the vehicle
when parking and to perceive nearby obstacles.
It is automatically deleted if the vehicle remains
stationary for too long.
An additional jet is fitted above the number plate
to clean the reversing camera (depending on
version).
The screen is divided into 3 parts with a side
menu, a contextual view and a view from above
the vehicle in its close surroundings.
The parking sensors supplement the information
in the view from above the vehicle.
Different contextual views are available:
– Automatic zoom view.
– Standard view.
– Panoramic view.
Depending on the context, the system chooses
the best view to display (standard or automatic
zoom).
The rear camera records the vehicle's
surroundings during the manoeuvre in order to
create a view from above the rear of the vehicle
in its close surroundings, allowing the vehicle to
be manoeuvred around nearby obstacles.
Using the sensors located on the rear bumper,
the automatic zoom view is displayed when
approaching an obstacle at the red line (less
than 30 cm) during the manoeuvre.
► The washing of the reversing camera is
triggered by operating the rear screenwash.
This view is only available automatically.
145
English 