Download User Manual App

Quickly access user manual for free!

Driving -> Speed limiter for Your Peugeot 308 4 Door 2021-2025

Driving  
For more information on the Speed  
limiter, Cruise control or Adaptive  
cruise control, refer to the corresponding  
Information displayed on  
the instrument panel  
Operating limits  
The system does not take account of reduced  
speed limits, especially those imposed in the  
following cases:  
6
sections.  
– Atmospheric pollution.  
Towing.  
Speed setting advance recommendations  
1. Detected speed limit indication  
or  
2. End of speed limit indication  
With Drive Assist 2.0 activated, the system  
detects the next speed limit sign, displays it in  
the background and proposes this new speed as  
the speed setting.  
– Driving with a space-saver type spare wheel  
or snow chains fitted.  
– Tyre repaired using the temporary puncture  
repair kit.  
Once memorised:  
Young drivers.  
– If the speed setting is lower than the previous  
one, the vehicle slows down to reach this new  
speed when it gets to the sign.  
– If the speed setting is higher than the previous  
one, the vehicle speeds up to reach this new  
speed when it passes the sign.  
The system may not display the speed limit if it  
does not detect a speed limit sign within a preset  
period and in the following situations:  
– Road signs that are obstructed, non-standard,  
damaged or bent.  
The system is active but is not detecting speed  
limit information.  
– Obsolete or incorrect maps.  
Steering-mounted controls  
Speed setting  
recommendations  
On detecting speed limit information, the system  
displays the value.  
The driver can select the speed displayed by the  
Road signs recognition system as the speed  
setting for the speed limiter, cruise control or  
adaptive cruise control using the OK button.  
If rain is detected, the system proposes a speed  
setting to the driver which is lower than the  
speed read/sent from the mapping system in  
order to adapt to the weather conditions (e.g. on  
motorways, the proposed speed is 68 mph (110  
km/h) instead of 81 mph (130 km/h).  
For a suggested maximum speed, the first time  
that the vehicle exceeds it by more than 3 mph  
(5 km/h) (e.g. 59 mph (95 km/h)), the speed is  
displayed and flashes for 10 seconds (depending  
on version).  
1. Select speed limiter mode  
117  
Driving  
Extended Traffic Sign  
Recognition  
2. Select cruise control mode  
3. Memorise the speed setting  
6. Current speed limit indication  
7. Next speed limit indication  
For more information, refer to the  
General recommendations on the use  
of driving and manoeuvring aids.  
Information displayed on the  
instrument panel  
Operating conditions  
– Eligible roads: roads with separate  
carriageways with prohibited access for  
pedestrians and cyclists.  
– Drive Assist 2.0 activated.  
– Vehicle speed between 0 and 112 mph (0 and  
180 km/h).  
– Steering wheel properly held by the driver.  
This additional system recognises these road  
signs and displays them on the instrument panel  
if the appropriate display mode is selected:  
No entry: when entering a lane in the wrong  
direction, an alert message, including the symbol  
of this sign, is displayed on the instrument panel  
(request to check the direction of traffic).  
Other signs: as you approach it, the symbol  
of the corresponding sign is displayed on the  
instrument panel.  
Memorising the speed setting  
► Switch on the speed limiter 1-LIMIT or cruise  
control 2.  
Information related to the speed limiter or cruise  
control is displayed.  
When a new speed setting is detected, the  
system displays the value and “OK?" to suggest  
saving it as a new speed setting.  
Without speed setting advance  
recommendations  
If there is a difference of less than 3 mph  
(5 km/h) between the speed setting and  
the speed displayed by the Road signs  
recognition, the "OK?“ symbol is not  
displayed.  
The actual road signs always take priority  
over the display from the system.  
The signs must comply with the Vienna  
Convention on road signs.  
Depending on the road conditions, several  
speeds may be displayed.  
► Press 3-OK to confirm the new speed setting.  
The display then reverts to its previous state.  
Activation/Deactivation  
With speed setting advance  
recommendations  
It is configured in the ADAS touch screen  
application.  
4. Current speed setting  
5. Speed memorisation prompt  
118