Driving
Have it checked by a PEUGEOT dealer or a
qualified workshop.
conditions (e.g. slope, load) and driving style
(e.g. power demand, acceleration, braking).
The system never suggests:
Associated indicator lamps
Function activated
– engaging first gear;
– engaging reverse gear.
Function deactivated or malfunction
Gear shift indicator
(Depending on engine)
Opening the bonnet
This system is designed to reduce fuel
consumption by recommending the most suitable
gear.
Before doing anything under the bonnet,
deactivate the Stop & Start system to avoid
any risk of injury caused by the engine
restarting automatically.
Stop & Start
The Stop & Start function puts the engine
temporarily into standby - STOP mode - during
phases when the vehicle is stationary (e.g. red
lights, traffic jams). The engine automatically
restarts - START mode - as soon as the driver
indicates the intention of moving off again.
Primarily designed for urban use, the function
is intended to reduce fuel consumption and
exhaust emissions as well as the noise level
when stationary.
Operation
Depending on the driving situation and
the vehicle's equipment, the system may
recommend skipping one or more gears.
Gear engagement recommendations are
not to be considered mandatory. Indeed, the
configuration of the road, the traffic density and
safety remain determining factors when choosing
the best gear. Therefore, the driver remains
responsible for deciding whether or not to follow
the system’s advice.
Driving on flooded roads
Before entering into a flooded area, it is
strongly recommended that you deactivate
the Stop & Start system.
For more information on Driving
recommendations, particularly on flooded
roads, refer to the corresponding section.
The function does not affect the functionalities of
the vehicle, in particular the braking.
The system cannot be deactivated.
Deactivation/Reactivation
With an automatic gearbox, the system is
only active in manual operation.
By default, the function is activated when the
ignition is switched on.
Operation
Main conditions for operation
It is configured in the ADAS touch screen
application.
The information appears on the
instrument panel, in the form of an arrow
and the recommended gear.
or
– The driver’s door must be closed.
– The driver's seat belt must be fastened.
– The level of charge in the battery must be
sufficient.
– The temperature of the engine must be within
its nominal operating range.
Direct access to the Shortcuts for driving aids.
The display of a message on the instrument
panel confirms the change of state.
If the function is deactivated while the engine is
in STOP mode, it will restart immediately.
The system adapts the gear change
instructions according to the driving
110
English 