Get Driving -> Cruise control Guide for Peugeot 5008 SUV Second Generation (2017-2023)

Driving

Exceeding the programmed speed

setting

You can temporarily exceed the speed

setting by pressing the accelerator pedal (the

programmed speed ﬂashes).

To return to the speed setting, release the

accelerator pedal (when the set speed is

reached again, the displayed speed stops

ﬂashing).

programmed by the driver (speed setting),

without using the accelerator pedal.

Cruise control is switched on manually.

It requires a minimum vehicle speed of 25 mph

(40 km/h).

With a manual gearbox, it requires the

engagement of third gear or higher.

With an automatic gearbox, it requires the

engagement of mode D or of second gear or

higher in mode M.

2. Activation of cruise control at the current

speed / decrease speed setting

3. Activation of cruise control at the current

speed / increase speed setting

4. Pausing / resumption of cruise control with

the speed setting previously stored

5. Depending on version:

Display of speed thresholds recorded using

Memorising speeds

Operating limits

Never use the system in the following

situations:

Use the speed suggested by the Speed Limit

Recognition and Recommendation (MEM

display)

Cruise control remains active after

changing gear on engines ﬁtted with a

manual gearbox and Stop & Start.

– In an urban area with the risk of

pedestrians crossing the road.

– In heavy traﬃc (except versions with the

Stop & Go function).

For more information on Memorising speeds

or on the Speed Limit Recognition and

Recommendation, refer to the corresponding

sections.

Switching oﬀ the ignition cancels any

speed setting.

– On winding or steep roads.

– On slippery or ﬂooded roads.

– In poor weather conditions.

– Driving on a speed circuit.

– Driving on a rolling road.

– When using snow chains, non-slip covers

or studded tyres.

Steering mounted control

Information displayed on

the instrument panel

Cruise control

Refer to the General recommendations on the

use of driving and manoeuvring aids and to

Cruise control - particular recommendations.

This system automatically keeps the

6. Cruise control pause/resume

7. Cruise control mode selection

8. Speed setting value

1. ON (CRUISE position) / OFF (position 0)

vehicle’s speed at the cruise value

137

Driving

Operation of the cruise control can also

be paused temporarily:

– by pressing the brake pedal.

– automatically, if the electronic stability

control (ESC) system is triggered.

The selection screen closes after a few

moments.

9. Speed suggested by the Speed Limit

recognition and recommendation system

(depending on version)

This setting becomes the new cruise speed.

To modify the cruise speed setting using the

speed suggested by the Speed Limit Recognition

and Recommendation shown on the instrument

panel:

► Press button 5 once; a message is displayed

to conﬁrm the memorisation request.

► Press button 5 again to save the suggested

speed.

Switching on/pausing

Changing the cruise speed

setting

The cruise control must be active.

To change the cruise speed setting, based on

the vehicle’s current speed:

► In +/- 1 mph (1.6 km/h) steps, brieﬂy press

button 2 or 3 as often as necessary.

► Continuously, in steps of +/- 5 mph (8 km/h),

press and hold button 2 or 3.

► Turn thumbwheel 1 to the "CRUISE" position

to select cruise control mode; the function is

paused.

The speed is immediately shown on the

instrument panel as the new speed setting.

Switching oﬀ

► Turn the thumbwheel 1 to the "OFF" position:

the cruise control information disappears from

the screen.

Pressing and holding button 2 or

3 results in a rapid change in the speed

of your vehicle.

► Press button 2 or 3 to activate cruise control

and save a speed setting when the vehicle has

reached the desired speed; the vehicle’s current

speed is saved as the speed setting.

Malfunction

As a precaution, we recommend setting

a cruise speed similar to the vehicle’s

current speed, to avoid any sudden

acceleration or deceleration.

► Release the accelerator pedal.

Dashes are displayed (ﬂashing, initially, then

ﬁxed) in the event of a cruise control system

malfunction.

Have the system checked by a PEUGEOT

dealer or a qualiﬁed workshop.

To change the cruise speed setting using

memorised speed settings and from the touch

screen:

► Press button 5 to display the memorised

speed settings.

► Pressing button 4 temporarily pauses the

function.

► Pressing button 4 again restores operation of

the cruise control (ON).

► Press the touch screen button for the desired

speed setting.

138

Driving -> Cruise control for Your Peugeot 5008 SUV Second Generation (2017-2023)

Related Topics

Driving