Driving -> Park Assist for Your Peugeot 5008 SUV Second Generation (2017-2023)

Driving  
180° view  
This system provides active parking assistance:  
it detects a parking space then operates the  
steering system to park in this space.  
With a manual gearbox, the driver manages the  
accelerator, brakes, gears and clutch.  
With an automatic gearbox (EAT6/EAT8), the  
driver manages the accelerator, brakes and  
gears.  
During phases of entry into and exit from a  
parking space, the system provides visual and  
audible information to the driver in order to make  
the manoeuvres safe. Several forward and  
reverse manoeuvres may be required.  
At any time, the driver can take back control by  
holding the steering wheel.  
STOP mode, activation of Park Assist restarts  
the engine.  
6
The Park Assist system takes control of  
the steering for a maximum of 4  
manoeuvring cycles. It is deactivated after  
these 4 cycles. If the vehicle is not positioned  
correctly, take back control to complete the  
manoeuvre.  
The sequence of manoeuvres and the  
driving instructions are displayed in the  
instrument panel.  
The assistance is activated: the display  
of this symbol and a speed limit  
indicate that the steering manoeuvres are  
controlled by the system: do not touch the  
steering wheel.  
The assistance is deactivated: the  
display of this symbol indicates that the  
steering manoeuvres are no longer controlled  
by the system: take over the steering.  
The 180° view assists with exiting from a parking  
space in forward gear, making it possible to  
see the approach of vehicles, pedestrians and  
cyclists.  
This view is not recommended for carrying out a  
complete manoeuvre.  
The Park Assist system provides assistance for  
the following manoeuvres:  
It consists of 3 areas: left A, centre B and right  
C.  
This view is available only from the view  
selection menu.  
Activation of Park Assist deactivates the  
Blind Spot Monitoring System.  
A. Entry into a "parallel" parking space  
B. Exit from a "parallel" parking space  
C. Entry into a "bay" parking space  
The Parking sensors function is not  
available during parking space  
measurement. It intervenes later when  
manoeuvring to warn that the vehicle is  
approaching an obstacle: the audible signal  
Park Assist  
Refer to the General recommendations on the  
use of driving and manoeuvring aids.  
The Park Assist system cannot operate  
with the engine switched off.  
When Park Assist is activated, it prevents  
Stop & Start from going into STOP mode. In  
161  
Driving  
becomes continuous when the obstacle is  
less than 30 centimetres away.  
If the Parking sensors function has  
been deactivated, it will be automatically  
reactivated during the assisted manoeuvring  
phases.  
During manoeuvring phases, the steering  
wheel performs rapid turns: do not hold  
the steering wheel or put your hands between  
the spokes of the steering wheel.  
Beware of any object likely to block the  
manoeuvre (e.g. loose clothing, scarves, ties)  
- risk of injury!  
► Engage reverse gear, release the  
steering wheel and move without  
exceeding the speed of 5 mph (7 km/h).  
The assisted parking manoeuvre is in  
progress.  
► Without exceeding 5 mph (7 km/h),  
7
move forwards and backwards, aided by  
the warnings from the "Parking sensors" system,  
until the end of the manoeuvre is indicated.  
The end of the manoeuvre is confirmed  
by a message and an audible signal.  
The system is deactivated: it is possible to retake  
control.  
During parking and exit from parking  
manoeuvres, the Visiopark 1 - Visiopark  
2 functions may come into operation. They  
allow better monitoring of the surroundings of  
the vehicle, by displaying additional  
information in the touch screen.  
For more information on the Visiopark  
1 - Visiopark 2 functions, refer to the  
corresponding section.  
Assistance with "parallel"  
parking manoeuvres  
► When parking, select "Park Assist" in  
the Driving/Vehicle touch screen menu  
to activate the function.  
► Limit the vehicle speed to a maximum  
of 12 mph (20 km/h) and select “Enter  
parallel parking space” on the touch screen.  
Assistance with "bay"  
parking manoeuvres  
► When parking, select “Park Assist” in  
the Driving/Vehicle touch screen menu  
to activate the function.  
► Limit the vehicle speed to a maximum  
of 12 mph (20 km/h) and select “Enter  
bay parking space” on the touch screen.  
► Operate the direction indicator on the  
parking side chosen to activate the  
measurement function. The vehicle should drive  
at a distance of between 0.5 m and 1.5 m from  
the row of parked vehicles.  
In some circumstances, the sensors may  
not detect small obstacles located in their  
blind spots.  
Any object exceeding the size of the vehicle  
(e.g. roof ladder, towball) is not taken  
into account by the Park Assist during a  
manoeuvre.  
To enter a parking space, the system  
does not identify spaces that are clearly  
smaller or larger than the vehicle.  
► Operate the direction indicator on the  
parking side chosen to activate the  
measurement function. The vehicle should drive  
at a distance of between 0.5 m and 1.5 m from  
the row of parked vehicles.  
Always check the surroundings of the  
vehicle before starting a manoeuvre.  
If the lateral distance between the vehicle and  
the space is too great, the system may not be  
able to measure the space.  
► Drive at a speed below 12 mph (20  
km/h) following the instructions until the  
system finds an available space.  
20  
► Drive at a speed below 12 mph (20  
km/h) following the instructions until the  
system finds an available space.  
20  
► Move forwards slowly until a message  
is displayed, accompanied by an audible  
signal, asking you to engage reverse gear.  
162  
Driving  
– after a prolonged stop of the vehicle during a  
manoeuvre.  
– if the wheel anti-slip regulation (ASR) is  
triggered.  
– if the speed of the vehicle exceeds the  
authorised limit.  
– when the driver interrupts the rotation of the  
steering wheel.  
– after 4 manoeuvring cycles.  
– if one of the front wheels encounters an  
obstacle.  
Deactivation is confirmed by a message and an  
audible signal.  
When several successive spaces are  
found, the vehicle will be directed  
towards the last one.  
► With the vehicle stationary, select  
"Park Assist" in the Driving/Vehicle  
touch screen menu to activate the function.  
► Press "Exit parking slot" on the touch  
screen.  
6
► Move forwards slowly until a message  
is displayed, accompanied by an audible  
signal, asking you to engage reverse gear.  
► Engage reverse gear, release the  
steering wheel and move without  
exceeding the speed of 5 mph (7 km/h).  
The assisted parking manoeuvre is in  
progress.  
► Operate the direction indicator for the  
exit side chosen.  
► Engage reverse or forward gear  
and release the steering wheel.  
The assisted parking manoeuvre is in  
progress.  
► Without exceeding 3 mph (5 km/h),  
move forwards and backwards, aided by  
5
► Without exceeding 5 mph (7 km/h),  
follow the instructions and the warnings  
7
the warnings from the "Parking sensors" system,  
until the end of the manoeuvre is indicated.  
The manoeuvre is complete when the vehicle's  
front wheels are clear of the parking space.  
The end of the manoeuvre is confirmed  
by a message and an audible signal.  
The system is deactivated: it is possible to retake  
control.  
The driver should then take back control of the  
vehicle's steering.  
from the "Parking sensors" system, until the end  
of the manoeuvre is indicated.  
The end of the manoeuvre is confirmed  
by a message and an audible signal.  
The system is deactivated: it is possible to retake  
control.  
If the system is deactivated during a  
manoeuvre, the driver should reactivate  
it to repeat the measurement.  
Deactivation  
During a "bay" parking manoeuvre, the  
Park Assist system is automatically  
deactivated once the rear of the vehicle is  
within 50 cm of an obstacle.  
The system is automatically deactivated:  
– when towing a trailer, connected electrically;  
– if the driver's door is opened;  
– if the speed of the vehicle is above 43 mph  
(70 km/h).  
Deactivation  
The system is deactivated via the Driving /  
Vehicle touch screen menu.  
The system is automatically deactivated:  
– when the ignition is switched off.  
– if the engine stalls.  
– if the driver's seat belt is not fastened.  
– on opening the driver's door.  
Assistance with "parallel"  
parking exit manoeuvres  
To leave a "parallel" parking space, switch  
To switch the system off for a prolonged period,  
contact a PEUGEOT dealer or a qualified  
workshop.  
the engine on.  
– if no manoeuvre is performed within 5 minutes  
of selecting the type of manoeuvre.  
163  
Driving  
Malfunctions  
If the parking sensor malfunction occurs  
during use, indicated by this warning lamp  
coming on, it causes the function to deactivate.  
In the event of a malfunction, have the system  
checked by a PEUGEOT dealer or a qualified  
workshop.  
In the event of a power steering  
malfunction, this warning lamp is  
displayed on the instrument panel, accompanied  
by a warning message.  
You must stop as soon as it is safe to do so.  
Contact a PEUGEOT dealer or a qualified  
workshop.  
164  
PEUGEOT & TOTAL  
PARTNERS IN PERFORMANCE!  
For over 20 years, the PEUGEOTTOTALpartnership has set new performance  
standards in achieving success in the toughest conditions, with victories in  
the Le Mans 24 Hours, the World Rally Championship and the Dakar Rally.  
To obtain these exceptional results, the Peugeot Sport teams chose TOTAL  
QUARTZ, a high-tech lubricant that protects the engine in the most extreme  
conditions.  
TOTAL QUARTZ protects your engine against the  
effects of time.  
TOTAL QUARTZ INEO FIRST is a very high-performance lubricant developed  
jointly by the Peugeot and Total R&D teams. Specially formulated for the  
engines in Peugeot vehicles, its innovative technology significantly reduces  
CO2 emissions and keeps your engine clean.