Get Driving -> Hill start assist Guide for Peugeot 5008 SUV Second Generation (2017-2023)

Driving

On an ascending slope, with the vehicle

stationary, the vehicle is held for a short time

when you release the brake pedal:

– provided you are in ﬁrst gear or neutral with a

manual gearbox.

N: neutral.

start, while you transfer your foot from the brake

pedal to the accelerator pedal.

This system is only active when:

– The vehicle is completely stationary, with your

foot on the brake pedal.

D1 to D8: automatic forward gear.

B1 to B8: automatic forward gear with

regenerative braking function activated.

In all-electric driving, the gear engaged is not

indicated.

The state of the gearbox remains displayed in

the instrument panel for a few seconds after

switching oﬀ the ignition.

– Certain slope conditions are met.

– The driver’s door is closed.

– provided you are in mode D or M with an

automatic gearbox.

Do not leave the vehicle while it is being

held temporarily by hill start assist.

If someone needs to get out of the vehicle

with the engine running, apply the parking

brake manually. After that, ensure that the

parking brake indicator lamp and the indicator

lamp P in the electric parking brake control

lever are on ﬁxed.

Regenerative braking

The regenerative braking function emulates

engine braking, slowing the vehicle with no need

to depress the brake pedal. When the driver

releases the accelerator pedal, the vehicle slows

down more quickly and recharges the battery.

► From mode D/B, moving the push selector

backwards activates/deactivates the function.

The D on the instrument panel is replaced with

a B.

On a descending slope, with the vehicle

stationary and reverse gear engaged, the

vehicle is held for a short time when you

release the brake pedal.

The hill start assist function cannot be

deactivated. However, use of the parking

brake to immobilise the vehicle interrupts its

operation.

The state of the function is not saved when the

ignition is switched oﬀ.

Malfunction

Operation

The driver must always be ready to use

the brake pedal: in certain situations (e.g.

full battery, extreme temperatures), the

regenerative braking level may be temporarily

limited and deceleration may be reduced.

These warning lamps come on in

the event of a malfunction.

Contact a PEUGEOT dealer or a qualiﬁed

workshop to have the system checked.

Dynamic pack

This pack governs the following elements:

– Acoustic ambience of the engine.

– Power steering.

Hill start assist

This system keeps your vehicle brieﬂy stationary

(for approximately 2 seconds) when making a hill

125

Driving

– Acceleration.

– Handling gear changes with the automatic

gearbox.

– Display on the instrument panel of information

about the dynamic parameters of the vehicle

("PERSONAL" mode).

The vehicle automatically changes to HYBRID

mode.

The lighting of a blue LED under the interior

rear view mirror, visible from outside the vehicle,

conﬁrms driving in ELECTRIC mode.

Driving modes

The number and type of driving modes available

depend on the vehicle’s engine and equipment.

Driving modes are selected using the following

control:

The lighting of the LED can be

deactivated by inserting the tip of a paper

clip type accessory into the hole under the

mirror.

Activation/Deactivation

► Press this button; the orange indicator

lamp in the button comes on to conﬁrm

SPORT

activation of the function.

Conditions of activation

– Adequate battery charge level. Charging

the vehicle after each drive is therefore

recommended. The ELECTRIC mode is

available as long as there is power left in the

battery.

– Exterior temperature between 0°C and 45°C.

Manually exiting the mode

– Fully depress the accelerator pedal.

– Select another mode.

If the orange indicator lamp ﬂashes,

activation is not available (e.g. if Park

Assist is selected).

If the indicator lamp continues ﬂashing for a

long time, contact a PEUGEOT dealer or a

qualiﬁed workshop.

Pressing the control displays the modes on the

instrument panel.

When the message disappears, the selected

mode is activated and remains indicated on the

instrument panel (except NORMAL mode).

Displays

To show this information on the instrument panel,

select the “PERSONAL” mode and then the type

of information required.

In case of non-use of the vehicle for a

long period (several months), a restart of

the petrol engine may occur even if the

battery is charged.

With hybrid engine

Each time the ignition is switched on, ELECTRIC

mode is selected by default.

This telemetry information (power output,

turbocharger pressure, torque,

longitudinal and lateral acceleration, etc.) is

given for information purposes only.

HYBRID

ELECTRIC

Optimises the fuel consumption of the vehicle

by managing the alternating or simultaneous

operation of the two types of engine,

according to road conditions and driving style.

In HYBRID mode, it is possible to drive in

100% electric mode if the battery charge level

Allows 100% electric driving. The maximum

speed is approximately 84 mph (135 km/h).

When starting the vehicle, if the conditions do not

allow the activation or retention of ELECTRIC

mode, the message “Electric mode currently

unavailable” is displayed in the instrument panel.

126

Driving -> Hill start assist for Your Peugeot 5008 SUV Second Generation (2017-2023)

Related Topics

Driving