Get Driving -> Speed limiter Guide for Peugeot 5008 SUV Second Generation (2017-2023)

Driving

Switching on / pausing

5. Depending on version:

Display of speed thresholds recorded using

Memorising speeds

Speed limiter

Refer to the General recommendations on the

use of driving and manoeuvring aids.

This system prevents the vehicle from

exceeding the speed programmed by the

driver (speed setting).

Use the speed suggested by the Speed Limit

Recognition and Recommendation (MEM

display)

► Turn knob 1 to the "LIMIT" position to select

speed limiter mode; the function is paused.

The speed limiter is switched on manually.

The minimum speed setting is 19 mph (30 km/h).

The speed setting remains in the system

memory when the ignition is switched oﬀ.

For more information on Memorising speeds

or on the Speed Limit Recognition and

Recommendation, refer to the corresponding

sections.

Steering mounted control

Information displayed on

the instrument panel

► If the speed setting is suitable (last speed

setting programmed in the system), press

button 4 to switch the speed limiter on.

► Pressing button 4 again temporarily interrupts

the function (pause).

When the speed setting remains below

the vehicle's speed for a prolonged

period of time, an audible warning is emitted.

6. Speed limiter on/pause

Adjusting the limit speed

setting

7. Speed limiter mode selected

8. Programmed speed value

9. Speed suggested by the Speed Limit

recognition and recommendation system

(depending on version)

1. ON (LIMIT position) / OFF (position 0)

2. Reduce the speed setting

3. Increase the speed setting

4. Pause / resume speed limiter with the speed

setting previously stored

You do not have to switch the speed limiter on in

order to set the speed.

To modify the limit speed setting based on the

vehicle’s current speed:

► Brieﬂy press button 2 or 3 to change the

value in steps of + or - 1 mph (1.6 km/h).

135

Driving

► Press and hold button 2 or 3 to change the

value in steps of + or - 5 mph (8 km/h).

To change the limit speed setting using

memorised speeds, via the touch screen:

► Press button 5 to display the memorised

speed settings.

► Release the accelerator pedal to return to

below the programmed speed.

When the limit speed is exceeded but this is not

due to action by the driver (in case of a steep

slope, for example), an audible signal triggers

immediately.

Malfunction

► Press the touch screen button for the desired

speed setting.

The selection screen closes after a few

moments.

This setting becomes the new limit speed.

To modify the cruise speed setting based on the

speed suggested by the Speed Limit Recognition

and Recommendation, as shown on the

instrument panel:

Dashes are displayed (ﬂashing, initially, then

ﬁxed) in the event of a speed limiter malfunction.

Have the system checked by a PEUGEOT

dealer or a qualiﬁed workshop.

On a steep descent or in the event of

sharp acceleration, the speed limiter will

not be able to prevent the vehicle from

exceeding the speed setting.

Brake if necessary to control the speed of

your vehicle.

Cruise control - particular

recommendations

► Press button 5 once; a message is displayed

to conﬁrm the memorisation request.

► Press button 5 again to save the suggested

speed.

The speed is immediately shown on the

instrument panel as the new speed setting.

For the safety of everyone, only use the

cruise control where the driving

conditions allow running at a constant speed

and keeping an adequate safety distance.

Remain vigilant when the cruise control is

activated. If you hold one of the speed setting

modiﬁcation buttons, a very rapid change in

the speed of your vehicle may occur.

When descending a steep hill, the cruise

control system cannot prevent the vehicle

from exceeding the set speed. Brake if

necessary to control the speed of your

vehicle.

Once the speed of the vehicle returns to the

programmed setting, the speed limiter functions

again: the display of the speed setting becomes

ﬁxed again.

Temporarily exceeding the

speed setting

► Press the accelerator pedal down fully.

Switching oﬀ

► Turn the thumbwheel 1 to the "OFF" position:

the display of information on the speed limiter

disappears.

On steep climbs or when towing, the set

speed may not be reached or maintained.

The speed limiter is deactivated temporarily and

the displayed speed setting ﬂashes.

136

Driving

Exceeding the programmed speed

setting

You can temporarily exceed the speed

setting by pressing the accelerator pedal (the

programmed speed ﬂashes).

To return to the speed setting, release the

accelerator pedal (when the set speed is

reached again, the displayed speed stops

ﬂashing).

programmed by the driver (speed setting),

without using the accelerator pedal.

Cruise control is switched on manually.

It requires a minimum vehicle speed of 25 mph

(40 km/h).

With a manual gearbox, it requires the

engagement of third gear or higher.

With an automatic gearbox, it requires the

engagement of mode D or of second gear or

higher in mode M.

2. Activation of cruise control at the current

speed / decrease speed setting

3. Activation of cruise control at the current

speed / increase speed setting

4. Pausing / resumption of cruise control with

the speed setting previously stored

5. Depending on version:

Display of speed thresholds recorded using

Memorising speeds

Operating limits

Never use the system in the following

situations:

Use the speed suggested by the Speed Limit

Recognition and Recommendation (MEM

display)

Cruise control remains active after

changing gear on engines ﬁtted with a

manual gearbox and Stop & Start.

– In an urban area with the risk of

pedestrians crossing the road.

– In heavy traﬃc (except versions with the

Stop & Go function).

For more information on Memorising speeds

or on the Speed Limit Recognition and

Recommendation, refer to the corresponding

sections.

Switching oﬀ the ignition cancels any

speed setting.

– On winding or steep roads.

– On slippery or ﬂooded roads.

– In poor weather conditions.

– Driving on a speed circuit.

– Driving on a rolling road.

– When using snow chains, non-slip covers

or studded tyres.

Steering mounted control

Information displayed on

the instrument panel

Cruise control

Refer to the General recommendations on the

use of driving and manoeuvring aids and to

Cruise control - particular recommendations.

This system automatically keeps the

6. Cruise control pause/resume

7. Cruise control mode selection

8. Speed setting value

1. ON (CRUISE position) / OFF (position 0)

vehicle’s speed at the cruise value

137

Driving -> Speed limiter for Your Peugeot 5008 SUV Second Generation (2017-2023)

Related Topics

Driving