Get Driving -> Memorising speeds Guide for Peugeot 5008 SUV Second Generation (2017-2023)

Driving

When washing your vehicle at high pressure,

direct the spray from at least 30 cm away

from the radar, sensors and cameras.

By default, some speed settings are already

memorised.

Speed Limit Recognition

and Recommendation

Refer to the General recommendations on the

use of driving and manoeuvring aids.

As a safety measure, the driver must only

change speed settings when stationary.

Mats

The use of mats not approved by

PEUGEOT may interfere with the operation of

the speed limiter or cruise control.

To avoid any risk of jamming the pedals:

► ensure that the mat is secured correctly,

► never ﬁt one mat on top of another.

Changing a speed setting

Speed settings can be activated,

deactivated, selected and changed in the

Driving / Vehicle touch screen menu.

"MEM" button

Units of speed

Ensure that the units of speed displayed

on the instrument panel (mph or km/h) are

those for the country you are driving in.

If this is not the case, when the vehicle is

stationary, set the display to the required

units of speed so that it complies with what is

authorised locally.

This system displays the maximum authorised

speed in the instrument panel, according to

the speed limits in the country in which you are

driving, using:

– Speed limit signs detected by the camera.

– Speed limit details from the navigation system

mapping.

In case of doubt, contact a PEUGEOT dealer

or a qualiﬁed workshop.

With this button, you can select a memorised

speed setting to use with the speed limiter or the

programmable cruise control.

For more information on the Speed limiter

or Cruise control, refer to the corresponding

section.

You should update your navigation

mapping regularly in order to receive

accurate speed limit information from the

system.

Memorising speeds

This function, used only for the speed limiter

and programmable cruise control, lets you

save speed settings that will subsequently be

proposed for the purpose of conﬁguring these

two systems.

The units for the speed limit (mph or

km/h) depend on the country you are

driving in.

This should be taken into account so that you

observe the speed limit.

You can memorise multiple speed settings for

each of the two systems.

132

Driving

For the system to operate correctly when

you change country, the units for speed in

the instrument panel must be those for the

country you are driving in.

Information displayed on

the instrument panel

For a suggested maximum speed, the ﬁrst time

that the vehicle exceeds it by more than 3 mph

(5 km/h) (e.g. 59 mph (95 km/h)), the speed is

displayed ﬂashing for 10 seconds (depending on

version).

The automatic reading of road signs is a

driving aid system and does not always

display speed limits correctly.

The speed limit signs present on the road

always take priority over the display by the

system.

Operating limits

The system does not take account of reduced

speed limits, especially those imposed in the

following cases:

The system is designed to detect signs that

conform to the Vienna Convention on road

signs.

1. Detected speed limit indication

2. End of speed limit indication

– Poor weather (rain, snow).

– Atmospheric pollution.

– Towing.

– Driving with a space-saver type spare wheel

or snow chains ﬁtted.

– Tyre repaired using the temporary puncture

repair kit.

Speciﬁc speed limits, such as those for

heavy goods vehicles, are not displayed.

The display of the speed limit in the

instrument panel is updated as you pass

a speed limit sign intended for cars (light

vehicles).

– Young drivers.

The system may not display the speed limit if it

does not detect a speed limit sign within a preset

period and in the following situations:

– Road signs that are obstructed, non-standard,

damaged or bent.

The system is active but is not detecting speed

limit information.

Activation / Deactivation

By default, the system is automatically activated

at every engine start.

It is set via the vehicle

– Obsolete or incorrect maps.

conﬁguration menu.

On detecting speed limit information, the system

displays the value.

133

Driving

Information displayed on the

instrument panel

Recommendation

3. Speed limit indication

4. Speed memorisation prompt

5. Current speed setting

In addition to Speed Limit Recognition and

Recommendation, the driver can select the

speed displayed as a speed setting for the speed

limiter or cruise control using the speed limiter or

cruise control memorisation button.

Memorising the speed

► Press button 2once to save the suggested

speed value.

A message is displayed, conﬁrming the request.

For more information on the Speed

limiter, Cruise control or Adaptive

cruise control, refer to the corresponding

sections.

► Switch on the speed limiter/cruise control.

The speed limiter/cruise control information is

displayed.

Steering-mounted controls

Upon detecting a sign suggesting a new speed

setting, the system displays the value and

"MEM" ﬂashes for a few seconds, prompting you

to save it as the new speed setting.

If there is a diﬀerence of less than 6 mph

(9 km/h) between the speed setting and

the speed displayed by the Speed Limit

Recognition and Recommendation, the

"MEM" symbol is not displayed.

► Press button 2again to conﬁrm and save the

new speed setting.

After a predetermined period, the screen returns

to the normal display.

1. Speed limiter/cruise control mode selection

2. Memorise the speed setting

Depending on the road conditions, several

speeds may be displayed.

134

Driving -> Memorising speeds for Your Peugeot 5008 SUV Second Generation (2017-2023)

Related Topics

Driving