2017-2023 Peugeot 5008 SUV Driving -> Lane Departure Warning System User Manual

MY CAR USER MANUAL

Driving -> Lane Departure Warning System for Your Peugeot 5008 SUV Second Generation (2017-2023)

Driving  
The following situations may interfere  
with the operation of the system or  
prevent it from working:  
– lane markings absent, worn, hidden (snow,  
mud) or multiple (roadworks);  
– close to the vehicle ahead (lane markings  
not detected);  
Using a camera located at the top of the  
windscreen to identify lane markings on the road,  
the system corrects the trajectory of the vehicle  
while alerting the driver if it detects a risk of  
unintentionally crossing a line.  
Activation/Deactivation  
This function cannot be deactivated on versions  
without a touch screen.  
This function is set via the Driving /  
Vehicle touch screen menu.  
The status of the system stays in the memory  
when switching off the ignition.  
This system is particularly useful on motorways  
and main roads.  
– roads that are narrow, winding, etc.  
Detection  
If an unexpected change of direction is  
detected, this warning lamp flashes in the  
instrument panel accompanied by an audible  
signal.  
No warning is transmitted while the direction  
indicator is activated and for approximately 20  
seconds after the direction indicator is switched  
off.  
Lane Departure Warning  
System  
Refer to the General recommendations on the  
use of driving and manoeuvring aids.  
This system, using a camera which recognises  
solid or broken lines, detects the involuntary  
crossing of longitudinal traffic lane markings on  
the ground.  
If the driver's attention drops and the speed  
is higher than 37 mph (60 km/h), the system  
triggers a warning if there is an unexpected  
change of direction.  
This system is particularly useful on motorways  
and main roads.  
Conditions for operation  
– Vehicle speed between 43 and 112 mph (70  
and 180 km/h).  
– Traffic lane with one or more (continuous or  
broken) ground markings.  
– Steering wheel held in both hands.  
– Direction indicators not activated.  
– ESC system activated and operational.  
Malfunction  
In the event of a malfunction, this warning  
lamp comes on on the instrument panel,  
accompanied by the display of a message and  
an audible signal.  
The system helps the driver only if there  
is a risk of the vehicle unintentionally  
wandering from the lane it is being driven in. It  
does not manage the safe driving distance,  
vehicle speed or brakes.  
Contact a PEUGEOT dealer or a qualified  
workshop.  
The driver must hold the steering wheel  
with both hands in a way that allows control  
to be maintained in circumstances where  
the system is not able to intervene (if lane  
markings disappear, for example).  
Active Lane Keeping  
Assistance  
Refer to the General recommendations on the  
use of driving and manoeuvring aids.  
150  
Driving  
However, with the Blind Spot Monitoring System  
system activated, if the driver starts changing  
lanes and another vehicle is detected in the  
vehicle's blind spot, the system will correct  
the trajectory of the vehicle even though the  
direction indicators are on.  
For more information on the Blind Spot  
Monitoring System, refer to the corresponding  
section.  
Operation  
6
Once the system identifies a risk of the vehicle  
involuntarily crossing one of the lane markings  
detected, it makes the correction to the trajectory  
required to return the vehicle to its initial path.  
The driver will notice a turning movement of the  
steering wheel.  
This warning lamp flashes during  
trajectory correction.  
While the direction indicators are on and for  
a few seconds after switching them off, the  
system considers that any change of trajectory  
is voluntary and no correction is triggered during  
this period.  
If the system detects that the driver is not  
holding the wheel firmly enough during  
an automatic correction of trajectory, it  
interrupts the correction. An alert is triggered  
to encourage the driver to take back control of  
the vehicle.  
The driver can prevent the correction by  
keeping a firm grip on the wheel (during  
an avoiding manoeuvre, for example).  
The correction is interrupted if the direction  
indicators are operated.  
Driving situations and related alerts  
To receive all the necessary information on the instrument panel, first select the "DRIVING" display mode.  
The table below describes the alerts and messages displayed in different driving situations.  
These alerts are not displayed sequentially.  
Function status  
Indicator lamp  
Display and/or associated Comments  
message  
OFF  
Function deactivated.  
(grey)  
151  
Driving  
Function status  
ON  
Indicator lamp  
Display and/or associated Comments  
message  
System active, conditions not met:  
– speed below 43 mph (70 km/h),  
– no lane marking recognised,  
– ASR/DSC systems deactivated or operation of ESC  
system triggered,  
(grey)  
– "sport" driving.  
ON  
ON  
ON  
Automatic deactivation/standby of the function (for  
example, due to detection of a trailer or use of the "space-  
saver" spare wheel provided with the vehicle).  
(grey)  
(green)  
Lane marking detection.  
Speed above 43 mph (70 km/h).  
The system corrects the trajectory on the side where the  
risk of unintentional crossing is detected (orange line).  
(orange)/(green)  
152  
Driving  
Function status  
ON  
Indicator lamp  
Display and/or associated Comments  
message  
6
– If, while correcting the trajectory, the system detects  
that the driver has not held the steering wheel for a few  
seconds, it interrupts the correction and returns control to  
the driver.  
(orange)/(green)  
"Take control of the  
vehicle."  
– If, while correcting the trajectory, the system determines  
that the correction will not be enough and that a solid line  
will be crossed (orange line): the driver is warned that they  
must provide additional trajectory adjustment.  
The duration of audible warnings will increase if multiple  
corrections are performed in quick succession. The  
warning will become continuous, persisting until the driver  
responds.  
This message may also be displayed if you have your  
hands on the steering wheel.  
– Crossing the inside line on a bend.  
– Driving in a tight corner.  
– Inactivity by the driver detected during  
correction.  
Risk of undesirable operation  
We recommend deactivating the system in the  
following driving situations:  
– Driving on damaged, unstable or very slippery  
(ice) road surfaces,  
– Poor weather conditions.  
Operating limits  
The system goes into standby automatically in  
the following cases:  
– ESC deactivated or operation triggered.  
– Speed below 43 mph (70 km/h) or greater  
than 112 mph (180 km/h),  
The following situations may interfere  
with the operation of the system or  
prevent it from working:  
– Driving on a speed circuit.  
– Driving on a rolling road.  
– Electrical connection of a trailer.  
– Insufficient contrast between the road  
– Use of a"space-saver" spare wheel detected  
(as detection is not immediate, deactivation of  
the system is recommended).  
– Dynamic driving style detected, pressure on  
the brake or accelerator pedal.  
surface and the side of the road (e.g. shade).  
– Lane markings worn, hidden (snow, mud)  
or multiple (roadworks, etc.),  
– Running close to the vehicle in front (the  
lane markings may not be detected).  
– Roads that are narrow, winding.  
Activation / Deactivation  
This function is set via the Driving /  
Vehicle touch screen menu.  
The state of the system stays in the memory  
when switching off the ignition.  
– Driving where there are no lane markings.  
– Activation of the direction indicators.  
153  
Driving  
– The speed of your vehicle must be between 7  
and 87 mph (12 and 140 km/h).  
– When overtaking a vehicle, the speed  
difference is less than 6 mph (10 km/h).  
– When overtaken by a vehicle, the speed  
difference is less than 16 mph (25 km/h).  
– Traffic is flowing normally.  
– Overtaking a vehicle over a certain period of  
time and the vehicle being overtaken remains in  
the blind spot.  
Malfunction  
In the event of a system  
malfunction, these warning lamps  
come on on the instrument panel, accompanied  
by an onscreen message and an audible signal.  
Have the system checked by a PEUGEOT  
dealer or a qualified workshop.  
The warning is given by a fixed warning lamp  
that appears in the door mirror on the side in  
question:  
– immediately, when being overtaken;  
– after a delay of about one second, when  
overtaking a vehicle slowly.  
Blind Spot Monitoring  
System  
Refer to the General recommendations on the  
use of driving and manoeuvring aids.  
– You are driving on a straight or slightly curved  
road.  
– Your vehicle is not pulling a trailer, a caravan,  
etc.  
Activation / Deactivation  
It is set via the Driving / Vehicle touch  
screen menu.  
Operating limits  
When the function is activated, this  
warning lamp comes on in the instrument  
panel.  
When starting the vehicle, the warning lamp  
comes on in each mirror to indicate that the  
system is activated.  
The state of the system stays in the memory  
when switching off the ignition.  
This system includes sensors, placed on the  
sides of the bumpers, and warns the driver of  
the potentially dangerous presence of another  
vehicle (car, truck, motorcycle) in the blind spot  
areas of their vehicle (areas hidden from the  
driver's field of vision).  
The system is automatically deactivated  
when towing with a towing device  
approved by PEUGEOT.  
Conditions for operation  
– All vehicles are moving in the same direction  
and in adjacent lanes.  
154  

Related Topics

Driving

Driving recommendations
Starting / Switching off the engine with the key
Electric parking brake
6-speed manual gearbox
Automatic gearbox
Hill start assist
Driving modes
Gear efficiency indicator
Stop and Start
Memorising speeds
Speed limiter
Cruise control
Drive Assist Plus
Adaptive Cruise Control
Distraction detection
Blind Spot Monitoring System
Parking sensors
Park Assist