2019-2026 Renault Captur SUV Driving -> Automatic gearbox, manual lever User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Automatic gearbox, manual lever for Your Renault Captur SUV Second Generation (2019-2026)

AUTOMATIC GEARBOX, MANUAL LEVER (1/4)  
Driving in automatic mode  
Put lever 1 into position D.  
1
In most road conditions you will en-  
counter, you will not need to touch your  
lever again: the gears will change au-  
tomatically at the right time and at the  
most suitable engine speed because  
the automatic system takes into ac-  
count the vehicle load and road contour  
and adjusts itself to the particular driv-  
ing style you have chosen.  
3
2
4
Economical driving  
When driving, always leave the lever  
in position D, keeping the accelerator  
pedal lightly depressed to ensure auto-  
matic gear changes at a lower engine  
speed.  
Selector lever 1  
P: park  
Operation  
With gear lever 1 in position P, start the  
engine.  
R: reverse  
Accelerating and overtaking  
To move out of position P, you must de-  
press the brake pedal before pressing  
the unlocking button 2.  
N: Neutral  
Depress the accelerator pedal firmly  
and fully.  
D: automatic mode  
The 4 display on the instrument panel  
shows the position engaged by the se-  
lector lever 1 or displays the gear en-  
gaged in manual mode.  
With your foot on the brake pedal  
(warning light 3 on the display goes  
out), move the lever out of position P.  
This will enable you to change down  
to the optimum gear within the  
engine range.  
Only engage D or R when the vehi-  
cle is stopped, with your foot on the  
brake and the accelerator pedal re-  
leased.  
Note: press the 2 button to exit position  
P or to shift from position D or N to po-  
sition R or P.  
2.158  
AUTOMATIC GEARBOX, MANUAL LEVER (2/4)  
Driving in manual mode  
When driving in position D you can  
switch to manual driving mode using  
paddles 5 and 6 on the steering wheel.  
Depending on the vehicle, two manual  
driving modes are available:  
5
6
the “temporary” manual mode  
can be used to force gear shifting by  
briefly pressing one of the two pad-  
dles. the driving mode D and the  
gear engaged appear on the instru-  
ment panel.  
7
Note: the gearbox returns to auto-  
matic mode D automatically if the  
gear engaged is not optimal or if the  
paddles have not been used for a  
certain length of time.  
Note: return to automatic mode by  
pressing and holding the right-hand  
paddle. Automatic mode D is dis-  
played on the instrument panel.  
Gear changing paddles 5  
and 6  
Depending on the vehicle, you can use  
paddles 5 and 6 to change gear when  
the lever is in position D.  
permanent manual mode is ac-  
tivated by pressing and holding  
either of the paddles. Driving mode  
M and the gear engaged will appear  
on the 7 display on the instrument  
panel.  
In all situations:  
– to move down through the gears,  
press the left-hand paddle;  
– to move up through the gears, press  
the right-hand paddle.  
5: change to a lower gear.  
6: change to a higher gear.  
P, N and R are not accessible using the  
paddles.  
Note: depending on the display, the +  
and - or  
and  
indicators  
will suggest moving up or down a gear.  
2.159  
AUTOMATIC GEARBOX, MANUAL LEVER (3/4)  
Special cases  
Special circumstances  
Parking the vehicle  
In certain driving conditions (result-  
ing in, for example, engine protection,  
operation of the Electronic Stability  
Control programme: ESC etc.) the au-  
tomated system may change the gear  
automatically.  
If the road type or weather condi-  
tions (steep uphill slopes, sudden  
downhill slopes, deep snow, sand  
or mud) make it difficult to stay in  
automatic mode, depending on the  
vehicle, it is advisable to switch to  
manual mode using the paddles.  
This will prevent the automatic gear-  
box from changing gears repeatedly  
when climbing, and permit engine  
braking on long descents.  
When the vehicle is stopped, move the  
lever to position P while keeping your  
foot on the brake pedal: the gearbox is  
in neutral and the drive wheels are me-  
chanically locked by the driveshaft.  
Ensure that the electronic parking  
brake is engaged.  
Likewise, to prevent incorrect manoeu-  
vres, a gear change may be refused by  
the automatic system: in this case the  
gear display flashes for a few seconds  
as a warning.  
In cold weather, to prevent the  
engine from stalling, wait a few sec-  
onds before moving the selector  
lever from position P or N and en-  
gaging it in D or R.  
P position must only be engaged  
when the vehicle is stationary.  
An impact to the under-  
side of the vehicle while  
manoeuvring (e.g.: strik-  
ing a post, raised kerb or  
other street furniture) may result in  
damage to the vehicle (e.g.: defor-  
mation of an axle).  
To avoid any risk of accident, have  
your vehicle checked by an ap-  
proved Dealer.  
When facing uphill, to remain  
stopped, do not keep your foot on  
the accelerator.  
For safety reasons, do not  
switch off the ignition before  
the vehicle has come to a  
complete standstill.  
Risk of overheating the automatic  
gearbox.  
2.160  
AUTOMATIC GEARBOX, MANUAL LEVER (4/4)  
Maintenance period  
Refer to the maintenance document  
for your vehicle or consult an Approved  
Dealer to check whether the automatic  
gearbox requires scheduled mainte-  
nance.  
8
If it does not need to be serviced, there  
is no need to top up the oil.  
9
Operating faults  
when driving, if the message  
“WARNING: Check Gearbox” ap-  
pears on the instrument panel, it indi-  
cates a failure.  
Contact your approved Dealer as  
soon as possible;  
When setting off, if the lever is stuck in  
P when you press the brake pedal (e.g.  
battery fault), it is possible to manually  
release the lever to unblock the drive  
wheels. To do this, unclip the base of  
the gaiter and press the 9 button while  
simultaneously pressing the 8 button  
on the lever to unlock the lever and shift  
to position N.  
when driving, if the message  
“WARNING: Gearbox Overheating”  
appears on the instrument panel,  
stop as soon as possible to let the  
gearbox cool down and wait for the  
message to disappear;  
Troubleshooting on a vehicle with  
an automatic gearbox 5.36.  
Contact an authorised dealer as soon  
as possible.  
2.161  

Related Topics

Popular Owner Manuals