DRIVING ADVICE, ECO DRIVING (6/8)
ECO mode
Free-wheel function
ECO mode is a function which opti-
mises fuel consumption.
Depending on the vehicle, for vehicles
fitted with an automatic gearbox, in the
deceleration phases (with the foot fully
off the accelerator pedal), switching to
freewheeling (automatic neutral) de-
creases engine braking and allows you
to farther without accelerating in order
to save fuel.
It affects certain driving operations (ac-
celeration, shifting gears, cruise con-
trol, deceleration etc.).
Limiting acceleration enables low fuel
consumption in urban and surrounding
areas.
6
5
The
freewheel warning light illu-
Activating the function
minates when the “Freewheel” parame-
ter is activated (ON) in the user settings
➥ 1.83.
Depending on the vehicle, the function
can be activated either:
– by pressing switch 5;
This warning light is displayed when the
function is activated:
To do this, press the accelerator pedal
firmly and fully.
– by pressing the 6 switch. ➥ 3.2;
– in grey when the vehicle is not in
freewheel mode;
– from the multimedia screen (refer to
the multimedia instructions).
ECO mode is reactivated when you
take pressure off the accelerator pedal.
– in green or, depending on the vehi-
cle, when the vehicle is in freewheel
mode (automatic neutral).
The warning light
the instrument panel to confirm activa-
tion.
comes on on
Disabling the function
Depending on the vehicle, the function
can be deactivated either:
Note: depending on the vehicle, for
vehicles equipped with Multi-Sense
➥ 3.2, activation/deactivation is done
by configuring the various My Sense
modes or ECO mode.
While driving, it is possible to leave the
ECO mode temporarily in order to im-
prove engine performance.
– by pressing switch 5;
– by pressing the 6 switch. ➥ 3.2.
The warning light
the instrument panel to confirm deac-
tivation.
goes out on
2.35