2019-2026 Renault Captur SUV Driving -> Speed limiter User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Speed limiter for Your Renault Captur SUV Second Generation (2019-2026)

SPEED LIMITER (1/4)  
Controls  
1 Speed limiter On/Off switch.  
2 Cruise control On/Off switch.  
3 Switch to activate and decrease the  
limit speed (SET/-).  
4 Switch to activate and increase the  
limit speed or to set the stored limit  
speed (RES/+).  
5
4
3
1
2
5 Speed limiter function standby (with  
limited speed memory) (0).  
The speed limiter function helps you  
stay within the driving speed limit that  
you choose, known as the limit speed.  
You can link the speed limiter to  
the “Road sign detection” function.  
2.90.  
2.94  
SPEED LIMITER (2/4)  
7
7
4
3
1
To store the current speed, press the 4  
switch (RES/+) or the 3 switch (SET/-ꢀ):  
the limit speed replaces the dashes  
and, depending on the vehicle, the 7  
warning light appears in white.  
The minimum stored speed is 19 mph  
(30 km/h).  
Driving  
Switching on  
When a limit speed has been set but  
not yet reached, driving is similar to  
driving a vehicle without the speed lim-  
iter function.  
Press switch 1. The 7 warning light ap-  
pears in grey. The “Speed limiter ON”  
message appears on the instrument  
panel accompanied by dashes to indi-  
cate that the speed limiter function is in  
operation, waiting to store a limit speed.  
Once you have reached the stored  
speed, no effort on the accelera-  
tor pedal will allow you to exceed  
the programmed speed except in an  
emergency (refer to information on  
“Exceeding the limit speed”).  
2.95  
SPEED LIMITER (3/4)  
Limited speed cannot be maintained  
Exceeding the limit speed  
When driving down a steep gradient,  
the system may not maintain the limit  
speed: the limit speed flashes in red  
on the instrument panel and an audi-  
ble signal sounds at regular intervals to  
inform you of this situation.  
It is possible to exceed the limit speed  
at any time. To do this: press the accel-  
erator pedal firmly and fully (beyond  
the resistance point).  
While the speed is being exceeded, the  
speed limiter flashes red on the instru-  
ment panel. Then, release the accelera-  
tor pedal: the speed limiter function will  
return as soon as you reach a speed  
lower than the memorised speed.  
4
3
Varying the limit speed  
The limit speed may be changed by  
pressing repeatedly or holding down:  
– switch 4 (RES/+) to increase speed;  
– switch 3 (SET/-) to reduce speed.  
If the speed limiter is not  
available (after several at-  
tempts to activate), contact  
an approved dealer.  
2.96  
SPEED LIMITER (4/4)  
7
7
5
4
3
1
2
Putting the function on  
standby  
The speed limiter function is suspended  
when you press switch 5 (0). The limit  
speed is stored and displayed in grey  
on the instrument panel.  
Switching off the function  
The speed limiter function is inter-  
rupted:  
– when you press the 1 switch. In this  
case, the speed is no longer stored;  
– when you press the 2 switch. In this  
case the cruise control is selected  
and there is no stored speed.  
Recalling the limit speed  
If a speed has been stored, it can be re-  
called by pressing the 4 switch.  
The warning light 7 disappears from  
the instrument panel to confirm that the  
function is no longer active.  
When the speed limiter is set to  
standby, pressing the 3 switch  
re-activates the function without  
taking into account the memorised  
speed: the speed at which the vehi-  
cle is moving is taken into account.  
2.97  

Related Topics

Popular Owner Manuals