Get Driving -> Cruise control Guide for Renault Captur SUV Second Generation (2019-2026)

CRUISE CONTROL (1/5)

Controls

1 Cruise control On/Off switch.

2 Switch to activate and decrease

cruising speed (SET/-).

3 Switch to activate and increase

cruising speed or to recall the mem-

orised cruising speed (RES/+).

4

4 Switch the function to standby (with

3

5

cruising speed saved) (0).

This function is an addi-

tional driving aid.

5 Speed limiter On/Off switch.

It can under no circum-

stances replace the driver’s

responsibility to respect speed limits

or to be vigilant.

2

1

The cruise control function helps you to

maintain your driving speed at a speed

that you choose, called the cruising

speed.

The driver must always be in control

of the vehicle.

Cruise control must not be used

in heavy traffic, on winding or slip-

pery roads (black ice, aquaplan-

ing, gravel) and during bad weather

(fog, rain, side winds etc.).

This cruising speed may be set at any

speed above 19 mph (30 km/h).

There is a risk of accidents.

2.98

CRUISE CONTROL (2/5)

7

3

2

1

Switching on

Activating cruise control

Driving

Press switch 1.

While the vehicle is moving a steady

speed above approximately 19 mph

(30 km/h), press the 2 (SET/-) switch

or the 3 (RES/+) switch: the function

is activated and the current speed is

taken into account.

The cruising speed replaces the

dashes. Cruise control is confirmed

when the memorised speed and warn-

ing light appear in green 7.

Once a cruising speed is registered

and the cruise control function is active,

you may lift your foot off the accelera-

tor pedal.

The 7 warning light appears in grey.

The “Cruise control ON” message ap-

pears on the instrument panel accom-

panied by dashes to indicate that the

cruise control function is in operation

and waiting to memorise a cruising

speed.

If you try to activate the function below

19 mph (30 km/h), the message “Invalid

Speed” will be displayed and the func-

tion will remain inactive.

Please note that you must

keep your feet close to the

pedals in order to react in

an emergency.

2.99

CRUISE CONTROL (3/5)

Exceeding the cruising speed

The cruising speed may be exceeded

at any time by depressing the accelera-

tor pedal.

While it is being exceeded, the cruising

speed flashes in red on the instrument

panel. Then, release the accelerator

pedal: after a few seconds, the vehicle

will automatically return to its set cruis-

ing speed.

3

Cruising speed cannot be

maintained

2

When driving down a steep gradient,

the system may be unable to main-

tain the cruising speed: the memorised

speed will flash in red on the instrument

panel and an audible signal sounds at

regular intervals to inform you of this

situation.

Adjusting the cruising speed

The cruising speed may be changed by

pressing the following repeatedly:

– the 2 switch (SET/-) to reduce the

speed;

– the 3 switch (RES/+) to increase the

speed.

Note: press and hold one of the

switches to modify speed by succes-

sive increments.

If the cruise control is no

longer available (after sev-

eral attempts to activate

it), contact an Approved

Dealer.

2.100

CRUISE CONTROL (4/5)

7

4

3

2

Returning to the cruising speed

NB: if the speed previously stored is

much higher than the current speed,

the vehicle will accelerate more rapidly

to reach this threshold.

Putting the function on

standby

The function is set to standby if you:

If a speed is stored, it can be recalled,

once you are sure that the road condi-

tions are suitable (traffic, road surface,

weather conditions, etc.). Press the

switch 3 (RES/+) if the vehicle speed is

above 19 mph (30 km/h).

– 4 switch (0);

When the cruise control is set to

standby, pressing switch 2 (SET/-) re-

activates the cruise control function

without taking into account the stored

speed: it is the speed at which the vehi-

cle is moving that is taken into account.

– the brake pedal;

– the clutch pedal or shifting to neutral

if the vehicle has an automatic gear-

box;

When the speed is stored, cruise con-

trol activation is confirmed by the dis-

play in green of the cruising speed and,

depending on the vehicle, the 7 warn-

ing light is displayed.

– depending on the vehicle, the clutch

pedal for a prolonged period or upon

prolonged neutral position.

The cruising speed is stored and dis-

played in grey on the instrument panel.

2.101

CRUISE CONTROL (5/5)

7

5

1

The warning light 7 disappears from

the instrument panel to confirm that the

function is no longer active.

Switching off the function

The cruise control function is inter-

rupted:

– when you press the 1 switch. In this

case, the speed is no longer stored;

– when you press the 5 switch. In this

case the speed limiter is selected

and there is no stored speed.

Putting the cruise control

on standby or switching it

off does not cause a rapid

reduction in speed: you

must brake by depressing the brake

pedal.

2.102

Driving -> Cruise control for Your Renault Captur SUV Second Generation (2019-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals