Get Driving -> Lane keeping assist Guide for Renault Captur SUV Second Generation (2019-2026)

LANE KEEPING ASSIST (1/6)

1

Location of the camera 1

Make sure the windscreen is not ob-

scured (dirt, mud, snow, condensation

etc.).

Using information from the 1 camera,

the function triggers corrective action

on the vehicle steering system when

a continuous or broken line is crossed

or when approaching the roadside (di-

vider, barrier, pavement, embankment,

etc.) without the direction indicator

lights being activated.

This function is an addi-

tional driving aid. This func-

tion is not under any circum-

stances intended to replace

the due care and attention of the

driver, who should at all times be

in control of the vehicle.

You can retake control of the ve-

hicle at any time by operating the

steering wheel.

2.56

LANE KEEPING ASSIST (2/6)

To disable the function, press the 2

switch as many times as required to

select “Lane Keeping deactivated” on

the instrument panel.

Warning light

strument panel.



goes out on the in-

Note: deactivating the “Lane Keeping

Assist” function causes deactivation of

the “Lane Departure Warning” function.

2

Activation/deactivation

To activate the function, press the 2

switch as many times as required to

select “Lane Keeping Assist” on the in-

strument panel.

and “

^{The “}^{Lane Keeping activated” message}

” warning light are displayed

on the instrument panel.

When Lane Keeping Assist is activated,

the “Lane Departure Warning” function

is automatically activated. ➥ 2.51.

Each time the vehicle is started,

the function continues the mode

saved the last time the engine was

stopped.

2.57

LANE KEEPING ASSIST (3/6)

In these cases:

Special cases

– the function triggers an action on the

vehicle’s steering system to correct

the vehicle trajectory;

When using the function:

– If the system can no longer detect

any action by the driver on the steer-

– the warning light



and the indi-

ing wheel, the



warning light

cator 3 on the side of the breached

line turns to yellow on the instrument

panel.

appears in yellow on the instrument

panel, accompanied by the message

“Keep hands on steering wheel” and

an audible warning.

3

Note: on bends, the function allows for

slightly cutting the bend.

The audible warning is emitted along

with the warning light and message

until the driver takes control;

ing system is not sufficient, the

^{If the corrective action on the}^steer-

– if the system is active for too long,

an audible warning is emitted and

the indicator 3 on the side of the line

concerned flashes until the driver

takes control.

warning light and the indicator 3 on the

side of the breached line turn to red on

the instrument panel, accompanied by

a vibration on the steering wheel.

Operation

When the function is activated, the



warning light and the left and

right lines 3 are displayed in grey on the

instrument panel.

The function is set to operate when

the vehicle speed is between approxi-

mately 43 mph (70 km/h) and 112 mph

(180 km/h) and if the

light and left-hand and right-hand line

indicators 3 appear in white.



warning

The function operates if the vehicle

breaches a line or if the vehicle ap-

proaches the roadside (divider, barrier,

pavement, embankment, etc.) without

the direction indicator lights being ac-

tivated.

You can interrupt the trajectory cor-

rection at any time by moving the

steering wheel.

2.58

LANE KEEPING ASSIST (4/6)

Temporarily not available

– Very fast lane departure;

Conditions for non-activation

of the system

4

The system cannot be activated when:

– reverse gear is engaged;

– the field of vision of the camera is ob-

structed;

– driving continuously on a line;

– four seconds approximately after

changing lanes;

– tight bends;

– the

û



warning light is displayed.

– impaired visibility;

The

warning light and the left/

– activation of one of the direction indi-

cator lights;

right line warning lights are displayed in

grey on the instrument panel.

– strong acceleration;

– emergency braking;

– ...

Adjustment

Vehicles fitted with a multimedia

screen.

– “Alert”: adjust the line detection sen-

sitivity level. To do this, select:

If the function is unavailable, the



To access the multimedia screen func-

tion settings 4, refer to the multimedia

instructions:

warning light and the left/right correc-

tion warning lights 3 appear in grey on

the instrument panel.

– “Late”: line detected when cross-

ing;

– “Standard”: line detected on ap-

proach;

– “Vibration”: adjust steering wheel

vibration for the “Lane Departure

Warning” function;

– “Early”: line detected nearby.

Please refer to the multimedia instruc-

tions for further information.

2.59

LANE KEEPING ASSIST (5/6)

– press the 6 or 7 control repeatedly to

reach the “DRIVING ASSIST” menu.

Press the switch 8 OK;

Operating faults

When the system detects an operating

on the instrument panel, with the mes-

sage “Front camera to check”.

– press the 6 or 7 control repeatedly to

reach the “Lane Keeping sensitivity”

menu. Press the switch 8 OK;

Consult an approved dealer.

– scroll repeatedly pressing control 6

or 7 to adjust the setting. Press the 8

OK button.

6

5

8

7

Adjustments (continued)

Vehicles not fitted with a multimedia

screen

– With the vehicle stopped, press the

switch 5 as many times as required

to reach the “Vehicle” tab;

– press the 6 or 7 control repeatedly to

reach the “Settings” menu. Press the

switch 8 OK;

2.60

LANE KEEPING ASSIST (6/6)

This function is an additional driving aid. This function is not under any circumstances intended to replace the due care

and attention of the driver, who should at all times be in control of the vehicle.

System servicing/repairs

– In the event of an impact, the camera alignment may be changed, and its operation may consequently be affected. Deactivate

the function and consult an authorised dealer.

– Any work in the area where the camera is located (repairs, replacements, windscreen modifications etc.) must be carried

out by a qualified professional.

Only an authorised dealer is qualified to service the system.

In the event of system disturbance

Some conditions can disturb or damage the operation of the system, such as:

– windscreen obscured (by dirt, ice, snow, condensation etc.);

– a complex environment (tunnel etc.);

– poor weather conditions (snow, rain, hail, black ice etc.) ;

– poor visibility (night, fog etc.);

– the road markings are irregular or difficult to distinguish (e.g. partially erased, excessive spacing, distorted road surface) ;

– being dazzled (glaring sun, lights of vehicles travelling in the opposite direction etc.);

– the road is narrow, winding or undulating (tight bends etc.);

– closely following a vehicle travelling in the same lane.

In this case, the “Lane Keeping Assist” may react incorrectly or not at all.

Risk of unwanted, incorrect correction or no correction of trajectory.

Deactivating the function

You must disable the function if:

– the area of the camera has been damaged (on the windscreen side or the interior rear-view mirror side);

– the road is slippery (snow, black ice, aquaplaning, gravel etc.) ;

– poor visibility (night, fog etc.);

– the windscreen is cracked or distorted (do not carry out windscreen repairs in this area; have it changed by an Authorised

Dealer);

– the vehicle is towing a trailer or a caravan;

– the vehicle is entering an area with several surface markings (an area with road works etc.).

2.61

Driving -> Lane keeping assist for Your Renault Captur SUV Second Generation (2019-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals