Get Driving -> Speed limiter Guide for Renault Scenic 4 Door Fifth Generation (2023-2026)

SPEED LIMITER

– Upwards: activates, increases lim-

ited speed or stores the current

speed (SET/+).

– Downwards: activates, decreases

limited speed or stores the current

speed (SET/-).

Controls

The speed limiter function controls

the engine and braking system to

help you not to exceed a driving

speed that you have chosen, known

as the limit speed.

The speed limiter function can be

activated from 0 to 93 mph (150 km/

h) or, depending on the vehicle, to

105 mph (170 km/h).

Control A

3

5. Pop-up button (depending on the

vehicle): adapts the speed setpoint

to detected speed limits

ꢀ 232.

While ECO mode is acti-

vated, the limit speed

cannot exceed the maxi-

mum speed for ECO mode ꢀ 185.

Depending on the vehicle,

you can link the speed

limiter function to the

"Road sign detection" function

ꢀ 232 by pressing the switch 5 .

1. Switch for selecting/deselecting

the driving aids, depending on the

vehicle:

If the "OFF" mode is selected before

switching off the engine, the "Speed

limiter" function will be activated by

default the next time the engine is

started.

– Active Driver Assist;

– adaptive cruise control;

– speed limiter;

– OFF.

Driving

2. Puts the function on standby and

When a limit speed has been set but

not yet reached, driving is similar to

driving a vehicle without the speed

limiter function.

stores the limited speed (0).

3. Recalling the stored limit speed

(RES).

Once you have reached the stored

speed, no effort on the accelerator

pedal will allow you to exceed the

4.

2 4 0 - D r i v i n g

SPEED LIMITER

programmed speed except in an

emergency (refer to information on

"Exceeding the limit speed").

Varying the limit speed

Control A

Switching on

Control A

3

The warning light 6 appears in grey.

The "Speed limiter OK SET to acti-

vate" message appears on the in-

strument panel accompanied by

dashes to indicate that the speed

limiter function is in operation and

waiting to store a limit speed.

To store the current speed, press the

switch 4 upwards (SET/+) or down-

wards (SET/-): the limited speed re-

places the dashes and, depending

on the vehicle, the 6 warning light

appears in white.

You can change the limit speed by

repeatedly pressing or by pressing

and holding on control 4 :

– upwards on (SET/+) to increase the

speed;

Press switch 1 as many times as nec-

essary to select the speed limiter.

– downwards on (SET/-) to decrease

the speed.

Automatic speed limiter with

speed limit sign recognition

(depending on subscription: without

a subscription this function cannot

be activated. To manage your sub-

The minimum stored speed is 19 mph

(30 km/h).

D r i v i n g - 2 4 1

SPEED LIMITER

scription, see the multimedia in-

structions.)

Note: depending on the vehicle, it is

also possible to exceed the speed

limit by pressing the accelerator

pedal to a position close to the point

of resistance. In this case, an beep is

emitted in addition to the alert dis-

played on the instrument panel.

Putting the function on stand-

by

Using the camera, the "Road sign

detection" function ꢀ 232 and the

map associated with the subscrip-

tion, the system automatically limits

the vehicle speed when a speed limit

road sign is identified and passed.

Control A

3

You must keep your

feet near the pedals to

be ready to react in an

emergency.

Activation/deactivation

From the multimedia screen, in the

"Vehicle" World, select "Driving as-

sistance". Then, from the "Comfort"

tab, select "Adaptive speed limiter

and cruise control *".

Note: you can also activate/deacti-

vate by pressing and holding the

contextual button 5 .

If the speed limiter is

not available (after

several attempts to ac-

tivate), contact an ap-

proved dealer.

Exceeding the limit speed

The speed limiter function is sus-

It is possible to exceed the limit

speed at any moment. To do this,

press the accelerator pedal firmly

and fully beyond the point of resis-

tance.

pended when you press switch 2 (0).

The limit speed is stored and dis-

played in grey on the instrument

panel.

When exceeding the speed limit, the

speed limit flashes in yellow on the

instrument panel.

Then, release the accelerator pedal:

the speed limiter function will return

as soon as you reach a speed lower

than the memorised speed.

Recalling the limit speed

If a speed has been stored, you can

recall it by pressing the switch 3 .

2 4 2 - D r i v i n g

SPEED LIMITER

When the speed limiter is

set to standby, pressing

the control 4 upwards

To exit the driving assis-

tance, press switch 1 as

many times as necessary

until you reach OFF. The "Driving

Assistance deactivated" mes-

sage appears on the instrument

panel.

In this case, the next time the

engine is started, the "Speed

limiter" function will be activat-

ed and waiting for a speed limit

to be stored.

(SET/+) or downwards (SET/-)

reactivates the function with-

out taking into account the

stored speed: it is the speed at

which the vehicle is moving that

is taken into account.

3

Switching off the function

Control A

The speed limiter function is inter-

rupted when you press the 1 switch

to deselect the limiter. In this case,

the speed is no longer stored.

The 6 warning light disappears from

the instrument panel to confirm that

the function has stopped.

D r i v i n g - 2 4 3

Driving -> Speed limiter for Your Renault Scenic 4 Door Fifth Generation (2023-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals