2023-2026 Renault Scenic 4 Door Driving -> Tyre pressure loss warning User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Tyre pressure loss warning for Your Renault Scenic 4 Door Fifth Generation (2023-2026)

TYRE PRESSURE LOSS WARNING  
The system can be identified by the  
1 label in the vehicle.  
This function is an ad-  
ditional driving aid.  
The function does not  
Operating principle  
take the place of the  
driver. It cannot, therefore, un-  
der any circumstances replace  
the vigilance or the responsibili-  
ty of the driver. Check the tyre  
pressures, including the emer-  
gency spare wheel, once a  
month.  
3
Operating conditions  
In order to provide a reliable warning  
in the event of significant pressure  
loss, the system must be reset with  
an inflation pressure equal to one of  
those shown on the tyre inflation  
pressure label (reference values)  
350.  
This system detects a loss of pres-  
sure in one of the tyres by measuring  
the wheel speed while driving.  
Resetting should always be carried  
out after checking the tyre pressure  
of all four tyres when cold.  
In the following situations, the sys-  
tem risk coming into action late or  
not functioning correctly:  
The warning light  
2 appears  
and stays on to warn the driver in the  
event of insufficient tyre pressure  
(deflated, punctured tyre, etc.).  
system not reset after reinflation  
or any operation on the wheels;  
When fitted to the vehicle, this sys-  
tem notifies the driver if one or more  
tyres lose pressure.  
D r i v i n g - 1 8 9  
TYRE PRESSURE LOSS WARNING  
incorrectly reset system: tyre pres-  
sures different from the recom-  
mended pressures;  
significant change in load or distri-  
bution of load on one side of the ve-  
hicle;  
sporty driving with strong acceler-  
ation;  
driving on snowy or slippery sur-  
face;  
Procedure for resetting the  
standard levels for the tyre  
pressures  
Resetting procedure via the  
multimedia screen 3  
This should be performed:  
after each re-inflation or resetting  
of tyre pressure;  
after changing a wheel;  
after swapping a wheel (however,  
this practice is not recommended).  
3
driving with snow chains;  
fitting a single new tyre;  
use of tyres not approved by the  
network.  
Tyre pressures must correspond to  
the current usage of the vehicle  
(empty, carrying a load, motorway  
driving, etc.). Respect the tyre pres-  
sures (including the emergency  
spare wheel). Check them at least  
once a month and before a long jour-  
ney (refer to the label on the edge of  
the driver’s door 348).  
Tyre pressure must be  
checked before starting  
the resetting procedure.  
The system will not issue a  
warning if the pressure does not  
correspond to the recommend-  
ed pressure.  
The resetting procedure must be  
carried out while the vehicle is sta-  
tionary and the ignition is switched  
on.  
Please refer to the multimedia in-  
structions for further information.  
Readjustment of tyre pres-  
sures  
The pressure of the four tyres must  
be set when cold (refer to the label  
located on the edge of the driver's  
door) 350.  
A sudden loss of pressure  
in a tyre (burst tyre, etc.)  
may not be immediately  
detected by the system.  
If tyre pressures cannot be checked  
when the tyres are cold, the recom-  
1 9 0 - D r i v i n g  
TYRE PRESSURE LOSS WARNING  
mended pressures should be in-  
creased by 0.2 to 0.3 bar (3 PSI).  
launch the resetting of the tyre pres-  
sure reference value.  
Never deflate a hot tyre.  
Tyre pressure faults  
After each reinflation or readjust-  
ment of the tyre pressure, launch the  
resetting of the tyre pressure refer-  
ence value.  
3
Replacing wheels/tyres  
Only use equipment approved by the  
brand network, otherwise the sys-  
tem risks late activation or incorrect  
operation348.  
After each change of wheel/tyre,  
readjust the tyre pressure and  
launch the reset of the tyre pressure  
reference value.  
Emergency spare wheel  
The table lists the warning mes-  
sages that appear on the instrument  
panel 4 if the system detects a tyre  
pressure fault.  
The information on the instrument  
panel signals any potential tyre  
pressure faults (e.g. deflated or  
punctured tyre).  
If fitted on the vehicle, readjust the  
tyre pressure and launch the reset-  
ting of the tyre pressure reference  
value.  
Tyre repair product and infla-  
tion kit  
Only use equipment approved by the  
brand network, otherwise there is  
risk of the system being activated  
late or not working correctly 351.  
After using the tyre inflation kit,  
readjust the tyre pressure and  
D r i v i n g - 1 9 1  
TYRE PRESSURE LOSS WARNING  
Fault message table  
Indicator lights  
comes on  
Messages  
Readings  
This indicates that tyre under-inflation or  
puncture has been detected. Check and ad-  
just the pressure of the four tyres when cold  
and reset the system.  
Inflate tyres and init.  
3
This indicates that the reset has been unsuc-  
cessful. Check and readjust the tyre pressure  
before re-launching the resetting procedure.  
Check tyre press and init.  
flashes, then stays on  
This indicates a fault in the system. Consult an  
approved Dealer.  
Check TPW  
flashes, then stays on, along with  
the warning light  
This indicates that an emergency spare wheel  
different in size to the other four wheels has  
been fitted to the vehicle. The system remains  
unavailable until a wheel identical in size to  
the other wheels has been fitted and the re-  
setting procedure has been carried out.  
TPW not available  
flashes, then stays on  
1 9 2 - D r i v i n g  

Related Topics

Popular Owner Manuals