Get Driving -> Speed limiter Guide for Renault Symbioz 4 Door First Generation (2024-2026)

SPEED LIMITER

– Active driver assist;

– Adaptive Cruise Control;

– cruise control;

– speed limiter;

pedal will allow you to exceed the

programmed speed except in an

emergency (refer to information on

"Exceeding the limit speed").

The speed limiter function controls

the engine and braking system to

help you not to exceed a driving

speed that you have chosen, known

as the limit speed.

– OFF.

Switching on

2. Puts the function on standby and

stores the limited speed (0).

3

Depending on the vehicle,

you can link the speed

limiter function to the

"Road sign detection" function

ꢀ 217.

3. Recalling the stored limit speed

(RES).

4. Switch to activate and decrease

the limit speed or to store the cur-

rent speed (SET/-).

5. Switch to activate and increase

the limit speed or to recall the stored

limit speed (SES/+).

Controls

6. Pop-up button (depending on the

vehicle): adapts the speed setpoint

to detected speed limits

ꢀ 217

When the "OFF" mode is selected

before the ignition is switched off,

the "Speed limiter" function will be

activated by default the next time

the engine is started.

Driving

When a limit speed has been set but

not yet reached, driving is similar to

driving a vehicle without the speed

limiter function.

Once you have reached the stored

speed, no effort on the accelerator

1. Switch for selecting/deselecting

the driving aids, depending on the

vehicle:

2 2 6 - D r i v i n g

SPEED LIMITER

+): the limit speed replaces the dash-

es and, depending on the vehicle,

the 7 warning light appears in white.

The minimum stored speed is 19 mph

(30 km/h).

Automatic speed limiter with

speed limit sign recognition

(depending on subscription: without

a subscription this function cannot

be activated. To manage your sub-

scription, see the multimedia in-

structions.)

3

Varying the limit speed

Using the camera, the "Road sign

detection" function ꢀ 217 and the

map associated with the subscrip-

tion, the system automatically limits

the vehicle speed when a speed limit

road sign is identified and passed.

Activation/deactivation

Press switch 1 as many times as nec-

essary to select the speed limiter A .

The 7 warning light appears in grey.

The "Speed limiter ready: SET to ac-

tivate" message appears on the in-

strument panel accompanied by

dashes to indicate that the speed

limiter function is activated and

waiting for a limit speed to be

stored.

Note: depending on the vehicle,

when the vehicle is started, the

speed limiter is automatically se-

lected if the function A or OFF was

selected the last time the vehicle

was stopped.

From the multimedia screen, in the

"Vehicle" world, select "Driving as-

sistance". Then, in the "Comfort"

tab, select "To speed limitations" in

the "Adaptive regulation" field.

Note: you can also activate/deacti-

vate by pressing and holding the

contextual button 6 .

The limit speed may be changed by

pressing repeatedly or holding

down:

– switch 5 (SET/+) to increase the

speed;

– switch 4 (SET/-) to reduce speed.

Exceeding the limit speed

It is possible to exceed the limit

speed at any moment. To do this:

press the accelerator pedal firmly

and fully beyond the point of resis-

tance.

To store the current speed, press the

4 switch (SET/-) or the 5 switch (SET/

D r i v i n g - 2 2 7

SPEED LIMITER

When exceeding the speed limit, the

speed limit flashes in yellow on the

instrument panel.

Then, release the accelerator pedal:

the speed limiter function will return

as soon as you reach a speed lower

than the memorised speed.

Note: depending on the vehicle, it is

also possible to exceed the speed

limit by pressing the accelerator

pedal until it is near the point of re-

sistance. In this case, an beep is

emitted in addition to the alert dis-

played on the instrument panel.

When driving down a steep slope,

the system may not maintain the

limit speed: in this case the limited

speed flashes in red on the instru-

ment panel and a beep sounds at

regular intervals to inform you.

Recalling the limit speed

If a speed has been stored, it can be

recalled by pressing the switch 3

(RES).

3

When the speed limiter is

set to standby, pressing

switch 4 or 5 reactivates

the function without taking into

account the stored speed: it is

the speed at which the vehicle

is moving that is taken into ac-

count.

Putting the function on stand-

by

You must keep your

feet near the pedals to

be ready to react in an

emergency.

Switching off the function

If the speed limiter is

not available (after

several attempts to ac-

tivate), contact an ap-

proved dealer.

The speed limiter function is sus-

pended when you press switch 2 (0).

The limit speed is stored and dis-

played in grey on the instrument

panel.

Limited speed cannot be main-

tained

2 2 8 - D r i v i n g

SPEED LIMITER

The speed limiter function is inter-

rupted when you press the switch 1

to deselect the speed limiter. In this

case, the speed is no longer stored

The 7 warning light disappears from

the instrument panel to confirm that

the function has stopped.

3

To exit the driving assis-

tance, press switch 1 as

many times as necessary

until OFF. The message "Driving

Assistance deactivated" ap-

pears on the instrument panel.

In this case, the next time the

engine is started, the "Speed

limiter" function will be activat-

ed and waiting for a speed limit

to be stored.

D r i v i n g - 2 2 9

Driving -> Speed limiter for Your Renault Symbioz 4 Door First Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals