Get Driving -> Tyre pressure loss warning Guide for Renault Symbioz 4 Door First Generation (2024-2026)

TYRE PRESSURE LOSS WARNING

The system can be identified by the

1 label in the vehicle.

Operating principle

3

This system detects a loss of pres-

sure in one of the tyres by measuring

the wheel speed while driving.

Warning light

2 comes on

steady to alert the driver in the event

of insufficient pressure (deflated

wheel, punctured tyre, etc.).

When fitted to the vehicle, this sys-

tem notifies the driver if one or more

tyres lose pressure.

1 7 6 - D r i v i n g

TYRE PRESSURE LOSS WARNING

– significant change in load or distri-

bution of load on one side of the ve-

hicle;

– sporty driving with strong acceler-

ation;

– driving on snowy or slippery sur-

face;

– driving with snow chains;

– fitting a single new tyre;

– use of tyres not approved by the

network.

– after each re-inflation or resetting

of tyre pressure;

– after changing a wheel;

– after changing wheels around.

Tyre pressures must correspond to

the current usage of the vehicle

(empty, carrying a load, motorway

driving, etc.). Respect the tyre pres-

sures (including the emergency

spare wheel). Check them at least

once a month and before every long

journey (refer to the label on the

edge of the driver’s doorꢀ 340).

This function is an ad-

ditional driving aid.

The function does not

take the place of the

driver. It cannot, therefore, un-

der any circumstances replace

3

the vigilance or the responsibili-

ty of the driver. Check the tyre

pressures, including the emer-

gency spare wheel, once a

month.

The tyre pressure must be

checked before starting

the resetting procedure.

The system will not issue a

warning if the pressure does not

correspond to the recommend-

ed pressure.

Resetting procedure via the multi-

media screen 3

Operating conditions

In order to provide a reliable warning

in the event of pressure loss, the sys-

tem must be reset with an inflation

pressure equal to one of those

shown on the tyre inflation pressure

label (reference values) ꢀ 340.

Resetting should always be carried

out after checking the tyre pressure

of all four tyres when cold.

In the following situations, the sys-

tem risk coming into action late or

not functioning correctly:

The sudden loss of pres-

sure in a tyre (burst tyre,

etc.) cannot be immedi-

ately detected by the system.

– system not reset after reinflation

or any operation on the wheels;

– incorrectly reset system: tyre pres-

sures different from the recom-

mended pressures;

Procedure for resetting the

standard levels for the tyre

pressures

The resetting procedure must be

carried out while the vehicle is sta-

tionary and the ignition is switched

This should be performed:

D r i v i n g - 1 7 7

TYRE PRESSURE LOSS WARNING

on. Please refer to the multimedia in-

structions for further information.

After each change of wheel/tyre,

readjust the tyre pressure and

launch the reset of the tyre pressure

reference value.

Tyre pressure faults

For your safety, the

Emergency spare wheel

warning light

requires you to stop im-

mediately as soon as traffic

conditions allow.

3

If fitted on the vehicle, readjust the

tyre pressure and launch the reset-

ting of the tyre pressure reference

value.

Tyre repair product and infla-

tion kit

Readjustment of tyre pres-

sures

The pressure of the four tyres must

be set when cold (refer to the label

located on the edge of the driver's

door).

If tyre pressures cannot be checked

when the tyres are cold, the recom-

mended pressures should be in-

creased by 0.2 to 0.3 bar (3 PSI).

Only use equipment approved by the

brand network, otherwise there is

risk of the system being activated

late or not working correctly ꢀ 341.

After using the tyre inflation kit,

readjust the tyre pressure and

launch the resetting of the tyre pres-

sure reference value.

The table lists the warning mes-

sages which appear on the instru-

ment panel 4 when the system de-

tects a tyre pressure fault.

The information on the instrument

panel signals any potential tyre

pressure faults (e.g. deflated or

punctured tyre).

Never deflate a hot tyre.

After each reinflation or readjust-

ment of the tyre pressure, launch the

resetting of the tyre pressure refer-

ence value.

Replacing wheels/tyres

Only use equipment approved by the

brand network, otherwise the sys-

tem risks late activation or incorrect

operationꢀ 338.

1 7 8 - D r i v i n g

TYRE PRESSURE LOSS WARNING

Fault message table

Indicator lights

comes on

Messages

Readings

This indicates that tyre under-inflation or

puncture has been detected. Check and ad-

just the pressure of the four tyres when cold

and reset the system.

Inflate tyres and init.

3

This indicates that the reset has been unsuc-

cessful. Check and readjust the tyre pressure

before re-launching the resetting procedure.

Check tyre press and init.

flashes, then stays on

This indicates a fault in the system. Consult an

approved dealer.

Check TPW

flashes, then stays on, along with

the warning light

This indicates that an emergency spare wheel

different in size to the other four wheels has

been fitted to the vehicle. The system remains

unavailable until a wheel identical in size to

the other wheels has been fitted and the re-

setting procedure has been carried out.

TPW not available

flashes, then stays on

D r i v i n g - 1 7 9

Driving -> Tyre pressure loss warning for Your Renault Symbioz 4 Door First Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals