Get Getting to know your vehicle -> Rear seats Guide for Renault Symbioz 4 Door First Generation (2024-2026)

REAR SEATS

To refit the headrest

Rear headrests

Position for use

Enter the rods in their housing and

push down the headrest until it locks

to use it in the high position.

2

The side headrests are not ad-

justable.

Check that it is correctly locked.

Central headrest storage posi-

tion 2

Raise the central headrest fully until

it locks.

Check that it is correctly locked.

To remove the headrest

When the headrest is set at the low-

est position, this is for storage only:

it should not be in this position when

the seat is occupied.

The headrest is a safe-

ty component; check

that it is fitted and in

the correct position.

Press button 1 and lower the head-

rest completely.

Raise the headrest as far as it will go,

then press button 1 and remove the

headrest.

5 2 - G e t t i n g t o k n o w y o u r v e h i c l e

REAR SEATS

system. You may experience resis-

tance when handling.

To move a seat forwards or

backwards

Rear bench seat: functions

To replace the seatback, proceed in

the reverse order to removal.

2

Raise the seatback again until it

reaches the locking joint of the seat-

back.

Be careful not to jam the safety

strap between the backrest and the

parcel shelf.

Check the operation of the seat belt.

Before moving the seat-

back, put seat belt in belt

guide A to avoid damag-

ing it.

To fold down the seatback

Raise the lever 2 from the rear seats

to unlock the bench seat.

Ensure that the front seats are far

enough forward.

Before folding down a seatback:

– lower the headrests fully;

– place the seat belt in the belt

guide A and buckle the seat belt.

This prevents the seat belt from

locking when the seatback is lifted

up again.

Pull the handle 1 and lower the seat-

back B .

Note: for safety reasons, the seat-

back B is equipped with a retaining

Move the seat forwards or back to

the required position.

Release the lever 2 and ensure that

the bench seat is properly locked.

When refitting the

seatback, make sure it

is correctly locked in

place.

If seat covers are fitted, make

sure these do not prevent the

seatback latch from locking in.

Make sure that the seat belts

are positioned correctly.

Reposition the headrests.

For safety reasons, car-

ry out any adjustments

while the vehicle is sta-

tionary.

G e t t i n g t o k n o w y o u r v e h i c l e - 5 3

REAR SEATS

When moving the rear

seats, ensure that

nothing obstructs the

anchorage points

2

(passenger's arm or leg, a pet,

gravel, cloth, toys, etc.).

5 4 - G e t t i n g t o k n o w y o u r v e h i c l e

Getting to know your vehicle -> Rear seats for Your Renault Symbioz 4 Door First Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals