Get Getting to know your vehicle -> Seat belts Guide for Renault Symbioz 4 Door First Generation (2024-2026)

SEAT BELTS

Seat belts

Always wear your seat belt when

travelling in your vehicle. You must

also comply with the legislation of

the particular country you are in.

Adjusting the seat belts

Make sure that the rear

bench seat ꢀ 52 is locked

in position correctly so

that the rear seat belts will op-

erate correctly.

Before starting, first adjust your dri-

ving position, then ask all occupants

to adjust their seat belts to ensure

optimum protection.

Incorrectly adjusted or

twisted seat belts may

cause injuries in the

event of an accident.

Use one seat belt per person,

whether child or adult.

Even pregnant women should

wear a seat belt. In this case, en-

sure that the lap belt is not ex-

erting too much pressure on the

abdomen, but do not allow any

slack.

Adjusting your driving position

–

Sit well back in your seat (having

removed your coat or jacket, etc.).

This is essential to ensure that your

back is positioned correctly;

–

adjust the distance between the

To ensure the correct adjustment

and positioning of the seat belts on

all seats:

– adjust the seats (seat position and

seatback angle, if available);

– sit with your back firmly against

the seatback;

seat and the pedals. Your seat

should be as far back as possible

while still allowing you to fully de-

press the pedals. The seatback

should be adjusted so that your

arms are slightly bent when you hold

the steering wheel;

– move the shoulder strap 1 as close

as possible to the base of the neck

without it actually resting against it

(if necessary, adjust the height of

the seat belt if available) and make

sure that the chest strap 1 is in con-

tact with the shoulder;

– position the lap belt 2 so that it lies

flat on the thighs and against the

pelvis.

–

adjust the position of your head-

rest. For maximum safety, your head

must be as close as possible to the

headrest;

–

adjust the height of the seat. This

adjustment allows you to select the

seat position which offers you the

best possible view;

–

adjust the position of the steering

wheel.

G e t t i n g t o k n o w y o u r v e h i c l e - 5 5

SEAT BELTS

The seat belt must be worn as close

to the body as possible. e.g. avoid

wearing heavy clothing, keeping

bulky objects under the belts, etc.

seat belt(s) (if the passenger seat is

occupied) is not fastened.

Front seat belt reminder

Locking

Unwind the belt slowly and smoothly

and ensure that the buckle 3 locks

into the catch 5 (check that it is

locked by pulling on the buckle 3 ).

If the belt jams, allow it to return

slightly before attempting to unwind

it again.

If your seat belt is completely

jammed, pull slowly, but firmly, so

that just over 3 cm unwinds. Allow it

to return slightly before attempting

to unwind it again.

If there is still a problem, contact an

approved dealer.

With the doors closed, the graphic 6

is displayed on the instrument panel

for approximately 60 seconds when

the vehicle ignition is switched on.

This informs the driver of the fasten-

ing status of each of the front seat

belts every time:

– the doors are opened during dri-

ving (vehicle speed above zero);

– a front seat belt is fastened/un-

fastened.

Unlocking

Press the button 4 and the seat belt

will be rewound by the inertia reel.

Guide the belt.

Seat belt reminder warning

lights

Understanding the graphic 6 :

– symbol in green: seat belt fas-

tened;

– symbol in red: the seat is occupied

and the seat belt is not fastened;

– symbol in grey: seat not occupied.

This warning light appears on the

central display A when the vehicle

ignition is switched on and if the

driver's and/or front passenger's

5 6 - G e t t i n g t o k n o w y o u r v e h i c l e

SEAT BELTS

Always make sure that the front

if a rear seat is occupied and the

seat belt is not fastened.

When the vehicle speed is less than

approximately 12 mph (20 km/h), the

With the doors closed, the

passengers are properly fastened in

and that the number of seat belts in-

dicated as fastened corresponds to

the number of front seats occupied.

warning light appears on the central

display when the vehicle ignition is

switched on if the driver's and/or

front passenger's seat belt(s) (if this

seat is occupied) are not fastened.

When the vehicle speed is less than

approximately 12 mph (20 km/h), the

warning light on the central

display appears when a rear seat

belt is unfastened.

It is accompanied by the graphic 6

which appears for approximately 60

seconds each time one of the rear

seat belts is fastened or unfastened.

When the vehicle speed exceeds ap-

proximately 12 mph (20 km/h), if one

of the rear seat belts is or becomes

unfastened during the journey:

Note: an object placed on the pas-

senger seat may activate the warn-

ing light in some cases.

Rear seat belt reminder

warning light appears on the

central display if a front seat is occu-

pied and the seat belt is not fas-

tened.

It is accompanied by the graphic 6

which appears for approximately 60

seconds each time one of the front

seat belts is fastened or unfastened.

When the vehicle speed exceeds ap-

proximately 12 mph (20 km/h), if one

of the front seat belts is or becomes

unfastened during the journey:

With the doors closed, the graphic 6

is displayed on the instrument panel

for approximately 60 seconds when

the vehicle ignition is switched on.

This informs the driver of the fasten-

ing status of each of the front seat

belts every time:

– the doors are opened during dri-

ving (vehicle speed above zero);

– a front seat belt is fastened/un-

fastened.

– the

warning light flashes on

the central display;

and

– a beep sounds for around 30 or 120

seconds;

Understanding the graphic 6 :

– symbol in green: seat belt fas-

tened;

– symbol in red: the seat is occupied

and the seat belt is not fastened;

– symbol in grey: seat not occupied.

and

– the

the central display;

and

– a beep sound for approximately

120 seconds;

and

– the graphic 6 is displayed for ap-

proximately 180 seconds and the

symbol for the seat concerned

changes to red.

warning light flashes on

– the graphic 6 is displayed for at

least 60 seconds or, depending on

the vehicle, approximately 180 sec-

onds and the symbol for the seat

concerned changes to red.

Always make sure that the rear pas-

sengers are properly fastened and

that the number of fastened seat

belts indicated corresponds to the

number of rear seats occupied.

Depending on the vehicle, with the

doors closed the

warning light

on the central display also appears

when the ignition is switched on and

G e t t i n g t o k n o w y o u r v e h i c l e - 5 7

SEAT BELTS

Note: an object placed on one of the

rear passenger seat bases may acti-

vate the warning light in some cas-

es.

Rear centre seat belt

Rear seat belts

Rear side seat belts

Adjusting the height of the front

seat belts

Slowly unwind the belt 9 .

Click the buckle 10 into the black

catch 11 .

Fasten the buckle 12 into the red

catch unit 13 .

The locking, unlocking and adjust-

ment of the rear side seat belts 8 is

carried out in the same way as for

the front seat belts.

Press the button 7 to adjust the seat

belt height, so that the shoulder

strap is worn as shown previously.

Press the button 7 and raise or lower

the seat belt. Make sure that the

seat belt is locked in position cor-

rectly after you have adjusted it.

Ensure that you always

leave the buckle 10 fas-

tened in the catch 11 even

if no passenger is present in the

centre seat.

Check that the rear

seat belts are posi-

tioned and operating

correctly each time the

rear bench seat is moved.

5 8 - G e t t i n g t o k n o w y o u r v e h i c l e

SEAT BELTS

Warnings

The following information applies to the vehicle’s front and rear seat belts.

– No modification must be made to the originally-fitted restraint system components (seat belts, seats and

their mountings). For special operations (e.g. fitting child seats) please contact an approved dealer.

– Do not use devices which give any slack in the belts (e.g. clothes pegs, clips, etc.), as a seat belt which is

worn too loosely risks causing injury in the event of an accident.

– Never wear the shoulder strap under your arm or behind your back.

– Never use the same belt for more than one person and never hold a baby or child on your lap with your seat belt

around them.

– The belt should never be twisted.

– Following an accident, have the seat belts checked and replaced if necessary. Always replace your seat belts as

soon as they show any signs of wear.

– When the rear bench seat is being put back, make sure that the seat belts and buckles are correctly positioned so

that they can be used properly.

– Make sure that the seat belt buckle is inserted into the appropriate catch.

– Ensure that no objects are placed in the area around the seat belt catch as they could prevent it from being prop-

erly secured.

– Make sure the seat belt catch is properly positioned (it should not be hidden away, crushed or flattened by people

or objects).

G e t t i n g t o k n o w y o u r v e h i c l e - 5 9

Getting to know your vehicle -> Seat belts for Your Renault Symbioz 4 Door First Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals