Get Getting to know your vehicle -> Trip computer Guide for Renault Symbioz 4 Door First Generation (2024-2026)

TRIP COMPUTER

Vehicle fitted with instrument

panel A

General information

Trip computer A or B

2

Depending on the vehicle, this in-

cludes the following functions:

– mileage;

The functions are displayed in zone

– trip settings;

5

– information messages;

– operating fault messages (related

Select the functions by repeatedly

pressing switch 2 or 3 .

to the

warning light);

– warning messages (related to the

warning light);

– vehicle settings customisation

menu ꢀ 112.

All of these functions are detailed in

this user manual.

1 0 0 - G e t t i n g t o k n o w y o u r v e h i c l e

TRIP COMPUTER

– mileage;

For the first few miles after pressing

the reset key you will notice that the

range increases as you travel. This

range takes into account the aver-

age fuel consumption since the last

time the reset button was pressed.

Therefore, the average fuel con-

sumption may decrease when:

Vehicle fitted with instrument

panel B

– average speed;

c) trip mileage recorder and average

speed;

d) reset the tyre pressures;

e) set the time;

2

f) mileage before service:

– the vehicle stops accelerating;

– the engine reaches its operating

temperature (if the engine was cold

when the reset key was pressed);

– when driving from an urban area

onto the open road.

– distance before service;

– mileage before oil change.

Resetting the trip mileage

recorder and journey parame-

ters (reset button)

With one of the trip settings selected

as the display, press and hold switch

4 "OK " until the display resets to ze-

ro.

The functions are displayed in zones

5 .

Automatic resetting of the jour-

ney parameters

Select the functions by repeatedly

pressing switch 2 or 3 .

Resetting occurs automatically

when the maximum value of any of

the parameters is exceeded.

Selections

(the display depends on the vehicle

equipment and country)

f) Trip log, operating fault and infor-

mation message readout;

Interpreting some of the values

displayed after resetting

The values showing average fuel

consumption, range and average

speed will become more stable and

reliable the further you travel after

pressing the reset button.

b) Trip settings:

– average consumption;

– current fuel consumption;

– estimated mileage with remaining

fuel;

G e t t i n g t o k n o w y o u r v e h i c l e - 1 0 1

TRIP COMPUTER

Journey settings

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

2

Examples of selections

Interpreting the display selected

a) Trip log.

Successive display:

– information messages (passenger airbag OFF etc.);

– operating fault messages (check the injection system, etc.).

No stored message

b) Current fuel consumption.

This value is displayed after a speed of approximately 19 mph (30 km/h) is

reached.

7.4 L/100

5.8 L/100

Average fuel consumption since the last reset.

The value is displayed after having travelled at least 400 metres since the

last reset.

c) Trip mileage recorder: distance travelled since the last reset.

d) Reset the tyre pressuresꢀ 176.

112,4 km

Reset tyre pressure, press and hold

e) Set the time.

ꢀ 114

16 :30

1 0 2 - G e t t i n g t o k n o w y o u r v e h i c l e

TRIP COMPUTER

Examples of selections

Interpreting the display selected

On-board computer with mileage-be-

fore-service message

2

d) Mileage before service and oil change.

Service distance

Service in 18,641 miles (30,000 km)/12

months

With the ignition on and the engine not running, access the "Mileage before

service" information. When the distance or time value approaches its limit,

there are several possible scenarios:

– mileage remaining less than 932 miles (1,500 km) or one month: the "Ser-

vice due in" message is displayed accompanied by the nearest limit (dis-

tance or time);

Service due in less than 186 miles (300

km) or 24 days

– range equal to 0 miles (0 km) or date of service reached: the message

"Service required" is displayed accompanied by the warning light

The vehicle requires a service as soon as possible.

.

Service vehicle

Resetting: to reset the mileage before the next service, press and hold the OK button for approximately 10 seconds until

the display shows the mileage before service permanently.

Note: if a service is performed without changing the engine oil, only the mileage before the next service should be reset.

In the event of an oil change, both the distance before the next service and the next oil change should be reset.

Mileage before oil change

With the ignition on and the engine not running, access the "Mileage before

service" information to display the mileage before the next oil change.

Oil change in 18,641 miles (30,000 km)/24

months

Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at

low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the

next oil change can therefore decrease more quickly in some cases than the actual distance travelled.

Reset: to reset the distance before the next service, press and hold button OK for approximately 10 seconds until the

display shows the mileage before oil change permanently.

Note: if a service is performed without changing the engine oil, only the mileage before the next service should be reset.

In the event of an oil change, both the distance before the next service and the next oil change should be reset.

G e t t i n g t o k n o w y o u r v e h i c l e - 1 0 3

TRIP COMPUTER

Information messages

These can help in the vehicle starting phase, or give information about a selection or a driving status.

Examples of information messages are given in the following pages.

2

Examples of messages

"Parking brake applied"

Interpreting the display selected

Indicates that the parking brake has been applied.

Turn the steering wheel slightly whilst pressing the vehicle start button to un-

lock the steering column.

"Turn steering wheel + START"

"Checking control functions"

Displayed with the ignition on when the vehicle is running self-diagnostics.

1 0 4 - G e t t i n g t o k n o w y o u r v e h i c l e

TRIP COMPUTER

Operating fault messages

These appear with the

warning light to inform you that you should drive very carefully to an approved dealer as

2

soon as possible. If you fail to follow this recommendation, you risk damaging your vehicle.

They disappear when the display selection key is pressed or after several seconds and are stored in the computer log.

The

warning light stays on. Examples of operating fault messages are given in the following pages.

Examples of messages

"Check vehicle"

Interpreting the display selected

Indicates a fault in one of the pedal sensors, battery management system or

oil level sensor.

"Check airbag"

Indicates a fault in the restraint system in addition to the seat belts. In the

event of an accident, it is possible that they may not be triggered.

"Check emission control"

"Check electrical system"

Indicates a fault in the vehicle's particle filter system.

Indicates a fault in the traction system.

G e t t i n g t o k n o w y o u r v e h i c l e - 1 0 5

TRIP COMPUTER

Warning messages

2

These appear with the

conditions allow. Stop your engine and do not restart it. Call an approved Dealer.

warning light and require you to stop immediately, for your own safety, as soon as traffic

Some examples of warning messages are given below. Note: the messages appear on the display either individually or

alternately (when there are several messages to be displayed), and may be accompanied by a warning light and/or a

beep.

Examples of messages

"Risk of engine failure"

Interpreting the display selected

Indicates an injection fault, the vehicle’s engine has overheated or there is a

serious engine fault.

"Braking system fault"

Indicates a fault in the braking system.

"DANGER electrical fault"

Indicates a fault in the electrical system or a problem in the vehicle battery

charging circuit (alternator, etc.).

"Puncture"

Indicates that at least one wheel is punctured or severely underinflated.

Indicates a problem with the steering.

"Steering fault"

"Electric engine fault"

Indicates that the vehicle is losing power.

1 0 6 - G e t t i n g t o k n o w y o u r v e h i c l e

TRIP COMPUTER

Speedometer 1

Displays and indicators

Instrument panel A

Multimedia information 2

2

Depending on the vehicle, you can

display information from the multi-

media screen (compass, telephone,

navigation, etc.) or information from

the trip computer.

Please refer to the multimedia in-

structions for more information.

Estimated range with remaining

fuel 3

The value is displayed after driving

400 metres ꢀ 100.

Fuel gauge 4

If the level is at the minimum, warn-

It lights up when the ignition is

switched on. In some cases, the ap-

pearance of a warning light is ac-

companied by a message.

ing light

integrated in the indi-

cator comes on orange, accompa-

nied by a beep. Fill up as soon as pos-

sible.

Depending on the vehicle, you can

customise your instrument panel

with the content and colours of your

choice.

Trip computer 5

ꢀ 100

Please refer to the multimedia in-

structions for more information.

Rev counter 6

(scale x 1,000)

Depending on the selected customi-

sation, it may not be displayed.

G e t t i n g t o k n o w y o u r v e h i c l e - 1 0 7

TRIP COMPUTER

In some cases, the appearance of a

warning light is accompanied by a

message.

Depending on the vehicle, you can

customise your instrument panel

with the content and colours of your

choice.

This is displayed differently accord-

ing to how the instrument panel is

customised. Depending on the style

selected, it may not be displayed.

Coolant temperature indicator 8

In normal use, the indicator 8 should

be located before zone 7 .

Under "intensive" operating condi-

tions, the needle may approach this

zone.

2

Trip computer/Multimedia infor-

mation10

This is not serious unless the warn-

Depending on the vehicle, you can

display information from the multi-

media screen (compass, telephone,

navigation, etc.) or information from

the trip computer.

For more information, refer to the

equipment instructions.

ing light

comes on accom-

panied by a message on the instru-

ment panel and a beep.

Please refer to the multimedia in-

structions for more information.

Instrument panel B

Coolant temperature indicator

11

In normal use, the indicator 11 should

be located before zone 12 .

Under "intensive" operating condi-

tions, the needle may approach this

zone.

This is not serious unless the warn-

ing light

comes on accom-

Speedometer 9

panied by a message on the instru-

ment panel and a beep.

Depending on the style selected, the

display varies.

Estimated range with remaining

fuel 13

It lights up when the ignition is

switched on.

Rev counter 15

The value is displayed after driving

400 metres ꢀ 102.

(scale x 1,000)

1 0 8 - G e t t i n g t o k n o w y o u r v e h i c l e

TRIP COMPUTER

Fuel gauge 14

"Hands off steering wheel" de-

tection warning light 22

If the level is at the minimum, the

ꢀ 185 ꢀ 252

warning light integrated into

the indicator appears in orange, ac-

companied by a beep.

2

Urgent stop warning light 23

ꢀ 116

Fill up as soon as possible.

Special features of E-Tech Full

Hybrid versions

Direction indicators 16 and 20

Warning light 17

ꢀ 116

Tyre under-inflation warning

light 18

ꢀ 176

It lights up when the ignition is

switched on.

In some cases, the appearance of a

warning light is accompanied by a

message.

Airbag warning light 19

ꢀ 60

Electronic parking brake warn-

ing light 21

ꢀ 160

G e t t i n g t o k n o w y o u r v e h i c l e - 1 0 9

TRIP COMPUTER

or driving in steep off-road condi-

tions) at speeds below 6 mph (10 km/

h), the charge level may reach the

threshold for imminent immobilisa-

tion.

Message indicating that the ve-

hicle is ready for driving 24

The READY message appears when

the ignition is switched-on and dis-

appears when the vehicle speed ex-

ceeds 3 mph (5 km/h).

2

A beep sounds and the warning light

appears in red.

Speedometer 25

If the charge level continues to drop,

the electric range value will no

longer be displayed.

Depending on the style selected, the

display varies.

If possible, stop the vehicle when

traffic conditions allow it.

Leave the combustion engine on un-

til the warning lights disappear.

This must be done to recharge the

traction battery.

"230 V" traction battery level re-

maining 26

Traction battery level low

In the event of extreme use at low

speed, the traction battery charge

may reach a low level.

Energy flow indicator 29

ꢀ 22

The warning light 27 is displayed in

Electric operating mode warning

yellow to warn you.

Charge meter 30

ꢀ 168

light 28

The electric engine performance will

be limited to ensure that the E-Tech

Full hybrid system is working cor-

rectly until the traction battery

charging level is sufficient.

It is displayed when only the traction

battery is powering movement of

the vehicle.

Opt for a smoother driving style or, if

possible, stop the vehicle without

switching off the ignition until the

warning light 27 appears in blue

once again.

Immobilisation threshold imminent

In the event of extreme and pro-

longed use of the vehicle (e.g. towing

1 1 0 - G e t t i n g t o k n o w y o u r v e h i c l e

TRIP COMPUTER

Whatever the remaining battery lev-

el, fill the tank as soon as possible.

Combustion engine temperature

display 36

If the vehicle runs completely out of

fuel, fill the tank with at least 1.76 gal

(8 litres) of fuel.

2

Otherwise the hybrid mode will re-

main unavailable.

Driving mode selected 31

ꢀ 297

Press switch 37 to access the "Vehi-

cle" world 35 , then press switch 38

or 39 repeatedly until display 36 is

shown.

Trip computer zone or Multime-

dia information zone 32

Estimated range with remaining

fuel 33

The value is displayed after driving

400 metres ꢀ 102.

Fuel gauge 34

If the level is at the minimum, warn-

ing light

integrated in the indi-

cator comes on orange, accompa-

nied by a beep.

G e t t i n g t o k n o w y o u r v e h i c l e - 1 1 1

TRIP COMPUTER

Please refer to the multimedia in-

structions for more information.

Engine oil level low warning

Instrument panel in miles

2

To use certain driving aid

functions, it is necessary

to change the unit of

measurement on the instru-

ment panel in order to obtain

the appropriate information

when driving in a country where

the speed units differ from

those set as default on your ve-

hicle.

When the engine is started, the in-

strument panel display alerts you

when the minimum oil level is

reachedꢀ 324.

The first time the warning appears, it

can be cleared by pressing switch

40 "OK".

Subsequent warnings will disappear

automatically after around 30 sec-

onds.

(option to switch to km/h)

For safety reasons, car-

ry out any adjustments

while the vehicle is sta-

tionary.

With the vehicle stationary and the

engine on, from the multimedia

screen 41 select the "Vehicle" world,

press the "Settings" menu, then

"Units".

Choose between km/h or mph.

Vehicle settings personalisa-

tion menu

Depending on the vehicle equip-

ment, this function allows you to ac-

tivate/deactivate and adjust some

of the vehicle's functions.

The speedometer and some of the

distance information displayed on

the instrument panel are converted.

To return to the previous mode, re-

peat the same operation.

Note: once the battery is switched

off, the on-board computer auto-

matically returns to the original unit

of measurement.

1 1 2 - G e t t i n g t o k n o w y o u r v e h i c l e

TRIP COMPUTER

– Opening/closing in hands-free

mode;

– Remote locking/approach unlock-

ing;

– Remote locking sound;

– Silent mode;

– Automatic locking;

From the multimedia screen 1

For safety reasons, car-

ry out any adjustments

while the vehicle is sta-

tionary.

2

c) "Wiping and lighting":

On the instrument panel

– Wiping in reverse;

– Automatic front wiping;

– Wipe after wash;

d) "Welcome":

– Exterior welcome;

– Automatic deployment of door

mirrors;

– Interior welcome;

– Courtesy light auto mode

Depending on the function, select:

Accessing the settings menu

Refer to the various multimedia in-

structions for information on ac-

cessing the settings.

– "ON" or "OFF" to activate or deac-

tivate it,

or

– a setting for the time the lights are

switched on (e.g. for the "Follow-me-

home lighting" function).

Please refer to the multimedia in-

structions for further information.

Adjusting the settings

Select a menu then the function to

be modified (the display depends on

the vehicle equipment and country):

a) "Driving":

– Direction indicator volume;

b) "Access":

Accessing the settings menu on

the display 2

Press switch 3 as many times as re-

quired to reach the "Settings" world,

then confirm by pressing switch 6

"OK".

– Release driver's door;

– Lock doors during driving;

Press control 4 or 5 repeatedly to

reach the "Vehicle settings" menu,

then confirm by pressing "OK".

G e t t i n g t o k n o w y o u r v e h i c l e - 1 1 3

TRIP COMPUTER

Use control 4 or 5 to browse and se-

lect the function to be modified, then

confirm by pressing "OK" (the dis-

play may vary according to the vehi-

cle equipment and the country):

"INSTRUMENT PANEL":

– Language;

– Unit;

– Style;

– Colour.

"VEHICLE":

– Rear windscreen wiping in reverse

gear;

– Automatic windscreen wiping;

– Wipe after wash;

– Direction indicator volume;

– Exterior welcome.

– Distance warning.

"LIGHTING":

In this case, make your selection and

confirm it by pressing the switch 6

"OK", the selected value is shown by

– Courtesy light auto mode;

2

– Automatic follow-me-home light-

a

in front of the line.

ing;

To exit the menu, press the switch 3 .

It may be necessary to carry out this

operation more than once.

– Follow-me-home lighting: XX sec-

onds;

– ...

"ACCESS":

– Lock doors during driving;

– Hands-free opening/closing;

– Unlocking the driver’s door only;

– Automatic re-locking;

– Unlocking when approaching;

– Locking when moving away;

– Silent locking;

The vehicle settings per-

sonalisation menu cannot

be used when driving.

At a speed exceeding 12 mph

(20 km/h), the instrument panel

display switches automatically

back to trip computer and

warning system mode.

– Automatic opening/closing;

– Automatic deployment of door

mirrors;

"PARKING AIDS":

– Front;

– ...

– Rear;

"RESETTING".

Clock and outdoor tempera-

ture

– Side;

– Beep volume.

function activated;

"DRIVING AIDS":

– Lane departure warning sound

volume;

– Lane departure warning sensitivi-

ty;

From the multimedia screen

function deactivated.

The time and outdoor temperature

are displayed on the multimedia

screen 1 .

Press switch 3 to return to the previ-

ous menu.

– Lane departure warning vibration;

– Lane Keep Assist sensitivity;

– Blind spot;

Refer to the multimedia instructions.

If you select "PARKING AIDS" or "IN-

STRUMENT PANEL", you will be able

to make a selection (Park Assist

sound volume or instrument panel

language).

Exterior temperature indicator

– Active braking;

Special feature:

– Speed warning;

– Fatigue warning;

1 1 4 - G e t t i n g t o k n o w y o u r v e h i c l e

TRIP COMPUTER

When the exterior temperature is

between -3°C and +3°C, the °C char-

acters flash to signal a risk of ice on

the road.

2

Exterior temperature

indicator

As ice formation is re-

lated to climatic expo-

sure, local air humidity and tem-

perature, the external tempera-

ture alone is not sufficient to de-

tect ice.

Depending on the vehicle,

if the electrical supply is

cut (battery disconnect-

ed, supply wiring broken, etc.),

the clock will automatically re-

vert to the correct time after a

few minutes once the system is

able to receive GPS information.

G e t t i n g t o k n o w y o u r v e h i c l e - 1 1 5

Getting to know your vehicle -> Trip computer for Your Renault Symbioz 4 Door First Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals